Used Manipulator for sale (292)

Condition: new, diameter -- mm work piece width -- mm workpiece length -- mm Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) Njdsr I E Exspfx Adwjcl - Area of application sheet thickness: 3 - 35 mm - Motor: 400W - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm workpiece length -- mm work piece width 18 mm range of angles 15° - 50° ° weight of the machine ca. 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. *For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials Nsdpfok Egrtjx Adwscl * For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm * Application range of sheet thickness 6 - 40 mm * The bevel angle can be easily adjusted continuously from 15° to 50° without replacing any part * Double-sided bevel (X, K) with no material handling * Easy connection to 3D manipulator for easier operation and handling * Silent working * Equipped with automatic feeder * Stationary or mobile use * The machine works with large workpieces without any support at a speed of 1.9 m/min * Smaller workpieces are placed directly in the machine - Max. bevel width (hypotenuse): 18 mm - Infinitely adjustable angle: 15° - 50° - Area of application sheet thickness: 6 - 40 mm - Motor: 750W - Feed speed: 1.9 m/min - Weight: 110kg - Dimension: 438 x 719 x 644 mm We are happy to offer you an optional 3D manipulator (mobile) for this device on

Condition: new, diameter -- mm workpiece length -- mm work piece width 15 mm range of angles 15-50 ° plate thickness 6-40 mm total power requirement 1,5 kW Feed speed 3,5 m/min. dimensions 530 x 395 x 860 mm weight of the machine ca. 94 kg Ncsdpok Uqhaofx Adwel The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - Double-sided bevel (X, K) without material handling - Easy connection to the 3D manipulator for easier operation and handling - Silent working - Equipped with automatic feeder - Stationary or mobile use - The machine works with large workpieces without any support a speed of 3.5m/min - Smaller workpieces are placed directly in the machine - Reduced price when purchasing UZ15 RAPID together with the 3D manipulator

Condition: new, table diameter 690 mm table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg Ncsdjh Evt Uspfx Adwjl table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, diameter -- mm workpiece length -- mm work piece width 12 mm range of angles 30/45/22,5/37,5/50 ° weight of the machine ca. 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. * For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials * For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm * Application range of sheet thickness 3 - 35 mm * Beveling of pipes from an inner diameter of 95 mm * Variable setting of the desired bevel using an exchangeable holder kit for any given angle * Double-sided bevel (X, K) with no material handling * Silent working * Equipped with an automatic feed * Stationary or mobile use * The machine works with large workpieces without any support a speed of 1.8m/min * Smaller workpieces are placed directly in the machine * Lightweight and compact design, handleable by one operator * Motor thermal protection - Max. bevel width (hypotenuse): 12 mm - Bevel angle: 30° / 45° / 22.5° / 37.5° / 50° (replaceable KIT) - Area of application sheet thickness: 3 - 35 mm - Motor: 400W Ncsdpoppgcyofx Adwsl - Feed speed: 1.8 m/min - Dimension: 470 x 294 x 523 mm We can also offer you an optional 3D manipulator (mobile) for this device on

Condition: used, Year of construction: 2002, functionality: fully functional, overall weight: 1,245 kg, load capacity: 210 kg, arm reach: 3,100 mm, controller manufacturer: KUKA, teach pendant model: KRC2, Compact, extremely fast and with a unique combination of payload and reach: these attributes make KUKA comp series robots are the obvious choice for a wide range of applications – e.g. handling or spot welding. Model: KRC 2 KR 210 2002 Payload: 210kg Arm Reach: 2900 mm or 3100 mm Condition: Used and tested Year: 2002 (Multiple Options Available) Controller Cabinet: KRC2 Included: Manipulator + KRC2 Control Cabin + All Wire Sets + Teach Pendant Ncsdpev Tmkwofx Adwol Please note that the price does not include shipping costs. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs. Please get in touch with us for a quote and also the refurbishment options.

Condition: new, Year of construction: 2025, operating hours: 1 h, SPECIAL OFFER !!! Sawmill Viking VBS1100 SB(1) Condition: NEW! Log bandsaw with single-sided bandsaw blades. (Double cut, back and forth, possible for an extra charge!!!) Ncsdpfx Adjx Uw Emjwjl Roller diameter: 950mm Bandsaw blades: double-sided = 160mm wide, single-sided = 140mm wide Feed speed: 0-60m/min. Log diameter: up to 1100mm Cutting length: 6m (up to 9m extension possible, not included) Total weight: 7500 kg Digital cutting thickness adjustment via CNC touch panel Manual control unit with joystick Cutting view via green laser (video monitoring with surcharge) 22 kW saw motor Infinitely variable feed speed (0 - 60 m/min) Block manipulation: Hydraulic Trimmers, wet grinders, band saw blades, circular saw blades, etc. can also be purchased from Droste Schärftechnik. (Not included)

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, SALA DFF02/B CNC Sphere Machining Transfer Machine + Integrated Conni Automatic Loading Saw For sale: Italian-made SALA DFF02/B fully automatic sphere machining transfer machine, ideal for the valve and fittings industry. The machine is capable of processing both bar stock and forged brass parts and is equipped with an automatic loader system. Thanks to its capability for direct bar machining, it offers high material efficiency. Renowned for its reliability and precision, this model was thoroughly inspected and overhauled by the manufacturer SALA in 2011/2012 and is therefore in excellent working condition. General Features: Manufacturer: SALA Srl (Brescia, Italy) Model: DFF02/B Year of Manufacture: 2003 (Main Machine) Condition: Excellent functional state, overhauled. Technology: CNC Controlled System Application: Production of brass spheres, valves, and faucet components. Technical Specifications: Nsdpfex H T D Nsx Adwscl Number of Axes: 10 Number of Stations: 8 Part Transfer: Linear manipulator (linear transfer) Machining Range (Bar Diameter): Can machine bar diameters up to a maximum of 1" (inch) Material Processed: Brass Parts Per Cycle: 2 Machining Capabilities: Drilling (3/4-way), re-drilling, rough machining, diamond finishing, angle chamfering, milling. Integration: Able to work with a Conni automatic loading saw for bar cutting operations. Other: Minimum lubrication and cooling system for tools, remote assistance adjustment available.

Condition: used, Vacuum lifting and transport system. Handling equipment for easy transport of boxes, crates, bags, packs, bundles, … without effort. Ncodpfjx R Alqjx Adwjl Gripping tool with 4 suction cups. Maximum weight: 35 kg Vacuum pump with insulating box. Jib crane Liftop brand. Height : 300 cm Maximum lift diameter: 400 cm

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Ncodpjxayl Defx Adwjl Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: new, Year of construction: 2026, Technical data Control system multi-axis real-time interpolator, with active trajectory prediction, LAN communication, EtherCat, sampling time below 1ms, correction map, RTCP, remote service access Working area 2100x4100mm Z-axis clearance 400mm Drive system servo drives with EtherCat protocol, X, Y hardened helical strips ground in accuracy class 6, Z axis ball screw in accuracy class 5 Linear bearings trapezoidal rails Speed ​​of travel up to 60 m/min Nodpfsvyrgqjx Adwocl Program resolution up to 0.0001 mm Positioning accuracy 0.01mm Gate drive double-sided master/slave with gate angle correction Electric spindle 17kw s6 tilt/rotate head kit axis range a= +- 185°, c= +- 320°, orbital k plus px-2 15/12 63f nc hsk63 for 5 axis machines Tool cone HSK63F Maximum speed of the electrospindle up to 24,000 rpm Design welded steel, ribbed, stress-relieved, precisely machined Milling cutter shank diameters from 2 to 20 mm (optional up to 26 mm) Brushless electrospindle Table type vacuum, pneumatic sections Equipment options 3-position linear magazine 16-position revolver magazine with tool presence sensor positioning bases and vacuum blocks automatic central lubrication with solid grease pressure booster security fence intelligent vacuum sections wireless manipulator sensor for measuring the length and diameter of the tool positioning laser

Condition: new, Year of construction: 2026, CNC knife, creasing and cutting plotter, cutting plotter, creasing plotter Machine configuration: Drives: Helical hardened ground X, Y ball screw Z axis Linear bearing: Trapezoidal rails Ncjdst N Stxopfx Adwel Travel speed: 80 m/min Program resolution: 0.005 mm (0.0025 servo motors) Positioning accuracy: 0.01 mm Double-sided gate drive: yes Electrospindle power: 7.5Kw S6 Maximum electrospindle speed: 24000 rpm Electrospindle inverter: yes Brushless electrospindle: yes Cutter shank diameters: from 1 to 20 mm Construction: Steel welded Power supply: 400 V Possible additional options: - tool cooling - positioning bases with control - central lubrication system - Pneumatic extraction foot - Manual manipulator - 10-position linear magazine - 1.50 mm pneumatic oscillating knife - Creasing head - Circular knife - Material height sensor - Tool length and diameter sensor - 24-inch touchscreen monitor - Remote service access - 244 m3 vacuum pump with control system - Gate angle auto-calibration - Intelligent energy recovery - Safety fence Material fixing: Vacuum, pneumatically controlled sections with expansion valve Control Real-time industrial control system steel and soft metals: aluminum, brass, copper, bronze etc. composites: dibond, alucobond, etc. plastics: polycarbonate, PVC, plexiglass, teflon, polyamides, gambit, rubber, etc. solid wood and wood-based panels: plywood, chipboards, MDF, OSB, etc. paper, cardboard, foil, etc. foams, extruded materials, etc. leather, textiles etc. #plotter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Pywood #plytawiorowa #Chipboard #steel #aluminum #aluminum #brass #stainless steel #cast iron #polypropylene #polycarbonate #acrylic #fermacell

Condition: new, Year of construction: 2026, Machine for processing sinks made of materials such as sintered quartz, granite, granite composites and ceramic models, etc. Nedpfxsualqqo Adwocl Technical data: MILLING PLOTTER 1325 PRO+ WORKING AREA 1300X2500MM Z AXIS RANGE 700MM - PRO OMRON SERVO AC HIGH SPEED DRIVES (SET WITH PLANETARY GEARS) 1.5KW ETHERCAT INTELLIGENT ENERGY RECOVERY OSAI OPENSMART REAL-TIME INDUSTRIAL CONTROL SYSTEM, CYCLE TIME BELOW 2MS, SUPPORT UP TO 16 AXES, ETHERCAT COMMUNICATION WITH THE CONTROL CABINET AUTO CALIBRATION OF THE GATE ANGLE EUCHNER HBA-103037 HAND MANIPULATOR CONTROL CABINET AIR CONDITIONING TOOL LENGTH SENSOR (60MM) AUTOMATIC CENTRAL LUBRICATION WITH SKF SOLID GREASE BEAM SYSTEM PNEUMATIC CLAMPS SINK FIXING SYSTEM DUST REMOVAL CHANNELS BALL SCREW COVER ON THE Z AXIS BLOWING SYSTEM FOR RIDING ELEMENTS VACUUM SENSOR SYSTEM DOUBLE SCRAPER SET

Condition: excellent (used), Year of construction: 2018, The Staubli TX90L is a six-axis robotic arm characterized by a 15 kg payload capacity and a 1200 mm reach. This configuration enables the robot to perform a range of manipulation tasks within its defined operational envelope. Ncedowd Ixpjpfx Adwjl

Condition: new, Year of construction: 2026, workpiece weight (max.): 350 kg, load capacity: 350 kg, Vacuum Lifter STEEL SYSTEM UP300 (suitable for sheet metal – for use with a plasma cutting machine) This device enables the removal of small parts from the work table, even in areas where a magnet cannot be used. Equipped with a rechargeable battery and a battery level indicator. Compatible with all lifting machinery. • DIMENSIONS: - Height: 307 mm - Width: 215 mm - Depth: 247 mm • Device weight: 12.5 kg • Lifting capacity: 250 kg • 1 DS. SYSTEM suction pad ∅250 with replaceable sealing gasket • Integrated inspection manometer • Power supply: external battery (1 included – DeWalt, Milwaukee, Makita compatible) • Features an ergonomic, non-slip handle • Material dimensions: Minimum working area dimensions: 30x30 cm Material dimensions: 1×1 m See our other listings for additional equipment. We offer different machine configurations – contact us with your requirements and we will tailor the machine to your needs! Nodexqaw Uepfx Adwocl

Condition: new, Year of construction: 2026, Vacuum lifter for glass GLASS SYSTEM DS600C Device dedicated for window production and narrow glazing Lifter features Ncjdpexqfwyjfx Adwsl • Equipped with suction pad covers. • Individual adjustment of each suction pad on the Y-axis • Manual control – vacuum suction/release • Smooth manual rotation around its own axis by 45 degrees • Smooth adjustment from vertical to horizontal position • Easy suction pad configuration without tools • Power supply: 230V • Own weight: approx. 80 kg • Lifting capacity: 200 kg • 3 suction pads Ø 250 • CE certified

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: DS550 CA, overall weight: 50 kg, load capacity: 400 kg, VACUUM LIFTER PANEL SYSTEM DS550 CA Compact vacuum device for sandwich panels, ideal for wall installation. Its construction allows it to fit even in the trunk of a passenger car. The lifter is additionally equipped with a rotator, enabling 360° rotation of the panel. Available with radio control, manual operation, and a single-circuit version. Weight of the device: 50 kg Lifting capacity: 400 kg Ncsdpfswutibex Adwol Control - radio/manual Power supply - external battery (DeWalt - one included, with charger) Battery charge indicator: Yes Mounting position: vertical/horizontal Vertical wall mounting: Yes Number of suction pads: 1 Material length: 1-8 m

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 600, overall weight: 60 kg, warranty duration: 12 months, GLASS SYSTEM DS600 MINI VACUUM LIFTER For facade installation, glass window assembly, and glass transportation. Device size optimized for operation between façades and scaffolding. Technical specifications Lifting capacity: Maximum lifting capacity: 350 kg Control system: Radio remote control (remote range up to 200 m) Battery charge indicator: Yes Power supply: Battery-powered, up to 12 hours of operation Construction: Number of suction cups: 4 Number of circuits: 1 Number of arms: — Nedswzafpjpfx Adwscl Device weight: 60 kg Movement capabilities: Vertical/horizontal rotation: No Rotation around own axis: No Option to use rotation actuator: No Supported material dimensions: Minimum: 0.8 x 0.8 m Maximum: 2.5 x 2.5 m Ability to lift HST glazing: No Compatibility: For use with cranes and HDS (truck-mounted cranes) Flexible device configuration – can be tailored to individual customer needs

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 16 kg, arm reach: 1,610 mm, The KR 16 is designed for a rated payload of 16 kg in order to optimize the dynamic performance of the robot. Main Applications: - Welding - Dispensing - Additive Manufacturing Model: KR16 Standard & Foundry ( more option is also available ) Condition: Used & Tested Nedpfxeq A Uiuj Adwjcl Year: 2008 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant (Gripper and the base is not included) Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. (Source: KUKA's Website)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, load capacity: 300 kg, arm reach: 2,500 mm, controller manufacturer: KUKA, controller model: KRC4, As PLC Merkezi, we can conduct custom engineering projects with our industrial robots in our stock like this example. We can help you with: - Welding - Cutting - Machine Feeding - Palletising Ncsdsw Hrn Hopfx Adwel - Depalletising - Marble Processing - Apgant Machine Feeding and Metal Bending - And many other projects Brand: KUKA Model: KR 300 KRC4 R2500 ULTRA Year: 2014 Control Cabin: KRC4 Rated Payload: 300kg Access Distance: 2500mm Contents: Manipulator + Control Cabin + All Wiring Sets + Teach Pendant + Shipping: NOT included in the price Payment: 100% payment prior to collection Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: excellent (used), Year of construction: 2014, load capacity: 270 kg, arm reach: 2,700 mm, controller manufacturer: KUKA, controller model: KRC4, empty load weight: 1,129 kg, The most popular robot series from KUKA, the KR QUANTEC, is sturdy, sleek, versatile, and outfitted with high performance features. The KUKA KR 270 R2700 F Ultra robot has a repeatability of 0.06 mm.  Frequently used in the following applications: - Palletizing -Depalletizing Ncsdeq Dznbjpfx Adwjl -Material Handling -Additive Manufacturing -Assembly -Dispensing -Remote TCP. Model: KRC4 KR270 R2700 F Ultra (Foundry) Condition: Refurbished & Tested and also painted Year: 2014 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: The Base and gripper PLC MERKEZI Refurbishment Services Include: • Cleaning: The surface of the robot panel and the robot has been cleaned. • Oil Changing: The oils of all axes (6 axes) of the robot have been replaced. • Battery Changing: All batteries have been replaced with the new ones. • Mechanical Maintenance: Gear wheels counter balance are checked and maintained after weight, repeatability tests. • Electronical Maintenance: Includes drivers, electronic boards, teach pendant and PC maintenance. • Polishing and Repainting: After the cleaning the robot gets polished and be painted to its original colour, can be painted to the colour that you desired. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

Condition: excellent (used), functionality: fully functional, power: 125 kW (169.95 HP), emission class: euro5, Year of construction: 2019, operating hours: 4,500 h, Conrad Boxer 200 drilling rig with desanding unit Advanced wash drilling system, ideal for clay soils and geothermal applications. Includes 150 meters of drill pipes. The machine is equipped with a custom sand separation unit that efficiently separates clay and water, optimizing the drilling process. Hydraulically driven crawler chassis with rubber-vulcanised track shoes, track width 400 mm. Self-supporting welded steel subframe with stabilizing cylinders. Iveco NEF 45 ENT diesel engine, approx. 125 kW. Fully equipped hydraulic system with stainless steel reservoir. Modem installation for remote diagnostics. Radio remote control for travel and drilling functions. Fixed control panel with lockable enclosure. Hydraulically folding mast for 4 m drill rods. Mast translation system with 400 mm stroke. Vertical hydraulic feed system. Drill carriage and guide rail system. 4-inch hydraulic drill head Conrad T-4-5-600. Hydraulic tilting system. Weight compensator for drill rod protection. Hose and cable management system. Hydraulic top clamp. Hydraulic flushing pump. Prepared for displacement pump installation. Ncjdpfex Uyukex Adwsl Hydraulic piston pump. 3-inch water circuit with flow meter. Flow control valve. Hydraulic breakout clamp. Drill rod storage cassette. Pipe handling manipulator. Automatic lubrication system.

Condition: used, Year of construction: 1973, functionality: fully functional, Technical Details: Banbury Kneader/Mixer No. 2 with peripheral equipment Documented Modifications/Upgrades: Year Modification/Upgrade 1973 Installation of 2 × 38" ASM batch-off units – Banbury II 1979 Beth filter for Kneader II 1981 Extraction system for Kneader 2 solvent tank 1985 Temperature control unit for Kneader 2 1994 Automatic unloading system for Mixer No. 2 Njdsx Itdrspfx Adwscl 2008 Vibration measurement system for Mixer II 2008 Demag manipulator for Mixer I (2x) 2009 Power quality interface measuring device for kneader 2009 Ergonomic upgrade for rubber splitter 2010 CMS system for Mixer II 2010 TCU upgrade for Mixer II 2014 BB 270-6W mixer head transfer unit (HTU) for Kneader II 2015 Monitoring system (Kneader I–III) for CMS Kneader II 2015 Replacement of outdated computers and UPS for Mixer 2 2015 Installation of autorelease terminals Mixer II 2017 Hopper for Mixer No. 2 2018 Mixer 2 MS Version 4 2018 Sheet feeding system Mixer 2 2021 Replacement of mixer body / serial no. 16439 2022 Mill gearbox Kneader 2 Control system: CMS system, TCU upgrade, computers and UPS replaced Maintenance/Condition: Regular upgrades and modernizations documented (1973–2022) Accessories/Options: batch-off units, sheet feeding system, hopper, drop gate, roll head with conveyor belt, mill, dip tank, cooling line, stacking unit

Year of construction: 2007, condition: ready for operation (used), This HOMAG WEEKE industrial production line was manufactured in 2007. It features a comprehensive setup for high-volume panel processing and edge-banding, including automatic loading systems, a central roller conveyor, multiple edge-banding modules, and a portal manipulator for stacking. Ideal for streamlined wood production, ensuring efficient handling and precision. Consider the opportunity to buy this HOMAG WEEKE industrial production line. Contact us for more information about this machine. Ncodpfx Ajx D Dq Ssdwjl Application Types Complete Production

Condition: new, Year of construction: 2025, functionality: fully functional, Semi-automatic bag-in-box filler as a table-top unit made of stainless steel; Plastic control cabinet with multifunctional display; Height adjustment of the filling device; Lever for cap manipulation; Filling valve control electric, therefore compressed air not required. Filling by pump, quantity measurement by flow meter; Ncsdpfxsq H Aygj Adwel Power supply: 230V, 50 Hz Dimensions: approx. 670 x 820 x 670 mm (L x W x H) Capacity: approx. 600 l/h with 5 l bag