Used Manual Folding Machine for sale (74,680)

Condition: good (used), Year of construction: 2001, Guillotine Boschert EL300 AMADA tool system tool station D diameter 88.9 mm New tool adapter A / B / C station Giedpfx Alodnny Rebsu Punching power: 280 kN (28 tons) Punching arm RADIUS 350 mm Side stop 500 mm right/left Depth gauge with digital display Page attacks new, Weight 2300 kg

Condition: like new (used), Year of construction: 1998, functionality: fully functional, input voltage: 400 V, overall weight: 850 kg, type of input current: three-phase, Manual Lisec 2k sealing machine for Polisulfide, year 1998, will be technically and optically completely overhauled prior delivery (will look and work as new) The overhauled machine will be available from end of May/middle of June and can be seen in our overhaul warehouse in Oroahsza/Hungary. The machine is now running on PS but can be modified to Silicone on demand as an option. Giedpfxoy Tl R Io Albsu Photos will be available after overhaul has been finished.

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, working width: 740 mm, stack height: 750 mm, overall weight: 2,445 kg, total height: 1,617 mm, total length: 3,880 mm, total width: 1,640 mm, input voltage: 380 V, Equipment: compressor, documentation/manual, Machine configuration: Horizon AFC-744AKT folding machine with palett feeder Gjdsy R Aufjpfx Albsiu Horizon MKU-54 mobile knife unit Horizon PST-40 press stacker unit The machine is made in 2008 Counter status is: approximately. 93M Machine condition: used, full funncional The machine is in stock, it is possible to check and test Our company is official dealer and service of Horizon, our service technicians checked the macchine(s), everithing works perfectly. If need we can do demo or test on the machine.

Condition: good (used), Year of construction: 1994, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, Manual sealing machine Reinhardt Technik Maxi Hydraulik, year 1994, good working order, running on silicone The machine will be available from our stock in Austria by the end of May 2026. Gsdjy S Tlkjpfx Albsiu Max. material temperature 80° Max. system pressure 300 bar Air supply pressure 6 bar

Condition: like new (used), Year of construction: 2005, functionality: fully functional, input voltage: 400 V, overall weight: 750 kg, type of input current: three-phase, Manual Lisec 2-k sealing machine TAL-50PS/B for Polysulfide. The machine is completely overhauled and therefore in excellent condition. As new. power: 3N/PE 400V 50Hz Load: 5,4kW The machine can be seen in our overhaul warehouse in Oroshaza/Hungary on appointment. Gijdpfx Aley Sv R Nsbsu

Condition: used, Year of construction: 2011, total length: 2,660 mm, total width: 1,200 mm, total height: 1,210 mm, Colour: Grey Empty weight: 1.260 kg Gisdpfxoyf Hcbs Albju Price: On request - Year: 2011 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 0138 - Drive system: Conventional - Power [kW]: 0.8 - Max. sheet thickness [mm]: 2 - Max. working width [mm]: 2000 - Transport dimensions: 2660mm x 1200mm x 1210mm (l x w x h) - Transport weight [kg]: 1260kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2003, 4 cassettes Gijdpfx Aoxnb N Holbsu 1 knive Technical specifications: Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 840 mm High stack feeding Configuration: – 4 cassettes on the first module Ti-52 – Mobile delivery Inverter-based, smooth folding adjustment Cassette noise reduction Becker compressor Double sheet sensor Electronic counter with batching Electric delivery with adjustable delivery speed. Spare parts and tools

Condition: excellent (used), Year of construction: 2018, working width: 1,200 mm, total length: 12,500 mm, 1 point 2 points boxes 3 points boxes Cardboard from 210-800 gsm Corrugate A/B/E Crash lock 300 meter per minute Max width open box 120cm Min width open box 5cm alignment unit unit for 1-3th creasing Crash lock Gluing unit KAS C1000 3 Guns Gjdpfx Aletq E U Ssbsiu unit 2end and 4th creasing Remote control Lenght 12.5 m 12KW

Condition: used, Year of construction: 2003, Format: 520 mm Giedpfx Asy T Rbrelbeu Equipment: Flat stack investors Station 1: 4 Bags Station 2: 4 Bags

Condition: used, Year of construction: 2005, Folding machine MBO K 800.2/4 SKTL MWK Year: 2005 Description: - 16 page folder - MBO Navigator Feeder - Pallet feeder - Excluding pump Folding unit MBO K 800.2/4 SKTL MWK - Parallel fold unit with 4 buckle plates - Perforating shaft - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Second cross fold to the left and right Gjdpfx Aotczixjlbjiu - Noise hood over the entire folding section - Excluding delivery

Condition: used, Year of construction: 2016, Folding machine MBO K8 S-KTL/4 Year: 2016 Description: - 16 page folder - Colour monitor with touch screen - Semi automatic setting Feeder - Pallet feeder: K8-FP120 - Counter - Pump Folding unit MBO K8 S-KTL/4-FP120 - Parallel fold unit with 4 buckle plates: 66cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Delta 502 Year: 2007 - Vertical stack delivery with pressing Gjdjyr Nypopfx Albjiu - Banding device(s): 2 MBO K8 - 380 volts - 3 phase Palamides Delta 502 - 220 volts - 3 phase Infeed width: 17 -78 cm Infeed length: 25 - 120 cm Max. mechanical speed: 10 - 230 mtr/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: new, Year of construction: 2026, Conventional, NC- or CNC-controlled hydraulic press brake / folding machine Maximum bending length: 2,500 mm Maximum bending capacity: - Steel sheet DC01-A with a tensile strength of approx. 350 N/mm² or material S235JR – 4 mm - Stainless steel sheet 304L – 2.5 mm - Aluminum sheet H24, tensile strength approx. 145 N/mm² – 5.5 mm - Zinc sheet according to DIN EN988, tensile strength approx. 190 N/mm² – 4.5 mm Upper beam stroke up to 110 mm Maximum bending angle: 135° Various back gauge options available: - Manual back gauge with 650 mm travel - NC-controlled back gauge with brush table or - NC-controlled back gauge with sheet supports and ball rollers Each with an adjustment range up to 1,470 mm Drive power: 5.5 kW Dimensions without back gauge: approx. 3.5 x 1.7 m x height 1.7 m Weight without oil filling: approx. 4,300 kg Giodoy Stwaspfx Albju

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Gijdpfxoy Tn N Ho Albsu

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 55300 € 1045.17 € 2550 mm 2.5 mm 1.5 mm 3.5 mm Motorisch 3830 mm 2200 mm 1900 mm 4050 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Godpfxewiq A Uo Albjiu Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: used, Year of construction: 2009, Format: 660 x 1040 mm Equipment: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Godpfx Alsy Tacrobjiu Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Condition: used, Year of construction: 2016, controller manufacturer: Heidenhain / Siemens, controller model: TNC620, _____ Description: Year of manuf. : 2016 Control : Heidenhain / Siemens TNC620 Movement X/Y/Z : 4100/420/300 mm Tool holder : SK40 In general: Model:AP-B 4000 Automatic Profile Machining Center Gedjy Ea Hujpfx Albeiu Machining length:4,000 mm Travel ranges X/Y/Z:4,100 / 420 / 300 mm Machine cover:Pneumatically operated, opens upward Controls:Operator terminal can move along the machine Control:Heidenhain TNC 620 CNC control Additional control:Heidenhain HR130 handwheel Table specifications:Size 16 T-slots, mounted longitudinally to the X-axis Working surface:4,200 x 420 mm Spindle: Motor power:14 kW S1 / 19 kW S6 Motor cooling:Water with additive Speed range:100 to 14,000 rpm Rated speed:1,800 rpm Torque:74 Nm S1 / 100 Nm S6 Drilling capacity in St 60/aluminum:25 mm/30 mm Thread size in St 60/aluminum:M20/M30 Tool magazine: Tool holder:SK 40 Tool clamping system:Spring-loaded clamping system with 9 kN clamping force Configuration:12-round magazine Tool change time:approx. 10 sec Coolant: Description:Coolant system (emulsion) Flow rate:40–60 l/min Tank capacity:250 l Extras:Coolant flush gun Accessories/Extras Waste management:Chip tray with 4 drawers Safety:Pendulum operation with light barriers

Condition: new, Year of construction: 2022, sheet width 2065 mm plate thickness 1.20 mm daylight opening 30.0 mm bending angle max. 0 - 135 ° total power requirement manuell weight of the machine ca. 500 kg dimensions of the machine ca. 2400 x 1115 x 1500 mm - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - easy adjustment of the upper beam by means of a foot pedal, Hands are free for the workpiece - manual bending machine for standard bending tasks - segmented upper beam for a large number of bending options - An auxiliary cylinder supports the bending process when folding - faster and easier bending process using a bow handle - easy adjustment of the lower beam to the respective sheet thickness - high upper beam for the production of high-edged profiles Furnishing : - Segmented upper cheek Gisdsxaat Ispfx Albou - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 254 | 254 | 254 | 254 mm

Condition: excellent (used), Year of construction: 2015, Offer consisting of: Heidelberg Stahlfolder Ti 52 Proline Max. sheet size: 52 x 84 cm Min. sheet size: 14 x 15 cm Max. folding speed: 180 m/min Learning mode for sheet measurement and automatic adjustment of suction cycle length for sheet spacing Setup mode / single sheet function Frequency-controlled inverter drive for stepless speed regulation Right-angle folding unit KBi 52 Connectable to the 1st and 2nd folding stations Ti 52 Max. sheet size: 52x42 cm Min. sheet size: 16x4 cm Max. cycle rate: 30,000 sheets/h SAF-56 mobile twin-stream shingled delivery Gedpjy D Rx Eofx Albsiu

Condition: used, Year of construction: 2021, sheet width 2020 mm plate thickness 1,5 mm 135 ° 100 mm total power requirement 1 kW weight of the machine ca. 965 kg dimensions of the machine ca. 2680 x 640 x 1100 mm NEW PRICE: 9,990 EURO Description: - Foot operation enables positioning of the sheet metal with both hands Gsdoy Erw Eopfx Albsiu - Workpiece clamping and bending process are motorized via a chain drive - Manual adjustment of the bending angle, reading of the angle on a scale ring - Many bending options with segmented upper beam - Precise movement of the bending beam via large flat guides - Heavy, robust welded construction

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Equipment: compressor, Guk hajtogató gép: FA50/ 6 ( 2004) 6 zseb FA 50/6-1K (2004) Giodpfx Ajy Id Rpslbou 6 zseb +1 kés Megkímélt állapotban. méret: B/2

Condition: refurbished (used), functionality: fully functional, Used HEIDELBERG TD 78/642 folding machine, sold as seen and approved. Complete with VFZ knife, pallet feeder, and COMBI pockets. Various deliveries with roller (SBP-VSA) available. Option for complete overhaul; cost estimate upon request. Giedpfx Aoyzxfzjlbsu

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg KD 78 KTLL folding machine – Year 2004. Overhauled with new extra grip rollers on the parallel fold, pneumatic window buckle, SAK 78 delivery. Giodpjyzptpjfx Albeu

Condition: like new (used), functionality: fully functional, Heidelberg Ti 36/66 folding machine + Kbi36 + Sta 30 F with marking system + NSF 36 (no stop feeder), consisting of: - Flat pile feeder Fi 36 - Year 2002 Gsdpfx Aloyzpmceboiu - 1st folding station Ti36/6 with 6 folding pockets on the first unit, equipped with new extra grip soft rollers (Falztechnic) - Year 2002 - 2nd folding station Ti 36/6 with 6 folding pockets on the second unit, equipped with new extra grip hard rollers (Falztechnic) with polycord for extra small formats - Year 2003 - Electronic knife KBi 36 for cross folding - Year 2002 - Small format delivery STA 30 F + MKE with shingled stack movement - Year 2005 - No stop feeder NSF36 for continuous production. - Shingle delivery SA36 - Year 2004 - Transfer table between 1st and 2nd station

Condition: new, Year of construction: 2024, neu 2024 Gsdpfowiqvnsx Albeiu 8310 prompt, Zwischenverkauf v Taiwan 50700 € 958.23 € 1 2035 mm 3.5 mm Hydraulisch 135 ° 3000 mm 1100 mm 1750 mm 2200 kg NC control for bending angle manual back gauge 600 mm hydraulic driven vertical movement of upper beam segmented blade segmented goose neck rail 30°, 110 mm with quick tool change system one piece flat bottom bar 30 mm according to CE rules

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 42100 € 804.11 € 2035 mm Gijdpewva H Aofx Albeu 3.5 mm Hydraulisch 135 ° 3000 mm 1100 mm 1750 mm 2450 kg hydraulic driven NC control for bending angle manual back gauge 600 mm sharp rail 45° (in one piece) front angle beam 75 mm mechanical stop adjustment of upper beam clamping force adjustment of upper beam according to CE rules (sample photo) ALTERNATIVELY: versionAMH-K,withSECTIONEDsharp rail 45° OPTION: 2 axes NC control with 7" touchscreen incl. motorized back gauge 800 mm