Used Material Handler for sale (16,839)

Year of construction: 2014, condition: used, This listing is for 1 of 2 Thermo Scientific ORBITOR RS Microplate Handler The unit is in full working condition and ready for immediate use This robotic microplate handler is a versatile arm designed to provide accurate and consistent automated movements for laboratory workflows. Manufactured by Thermo Scientific, this reliable collaborative robot is an excellent addition to any modern high-throughput screening facility. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. 2015 Cedrex Fluid X xsd-48 Pro Source Pedigree: Biotech / Research Facility Condition: Direct-from-Bench (Decontaminated/Original) Integrity: 100% Original Parts (Non-Refurbished) Bedezqf I Ejpfx Aktslp

Condition: used, Manufacturer: UNIMAN Load capacity: 9000 kg Blodpfx Ao Adqbhektep Travel range: 400–2050 mm

Condition: used, Year of construction: 2017, operating hours: 10,745 h, 2017 | Sennebogen 730E | Used Material Handling Excavator | 10745 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 79900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Bledsy Rulpopfx Aktep 👷‍♂️ Inspected by an independent expert 17 inspection points 13 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Machine has been broken down for 2 years. Cummins engine out of service. It was resold by Sennebogen at 10,000 hours and did about 1,500 hours until the engine failure. The DPF and Turbo were changed just before the breakdown due to a loss of power. The engine oil level is too high and it seems that diesel has gotten into the oil. Engine replacement needed. We were unable to try the machine but everything appears to be in order and nothing has been dismantled. Chassis MF36E, boom and stick K11 KA8. Wood clamp SGH-1750.32. The dimensions for transport have been indicated with the cabin tilted forward, ROPS/FOPS bar removed, and grapple removed. Additional grapples for the excavator are available as an extra. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40810 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, functionality: fully functional, Year of construction: 1993, container length: 5,550 ft, color: red, empty load weight: 4,660 kg, loading space height: 1,750 mm, Material/tool or workshop container with 3 aluminum roller shutters on each side and a tailgate at the rear. Various pull-out drawers, extension tables, and ramps. Bodpfezv Dy Dex Aktjlp In good condition. Loading possible.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, EURO-Jabelmann bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – year of manufacture 2022 – like new, including accessories For sale is a practically new bagging scale, model TN 260, from EURO-Jabelmann (manufacturer in Itterbeck, Made in Germany), with an upstream bulk material hopper 1,500 × 1,500 mm, manufactured in 2022. The scale doses and fills bulk materials such as potatoes, onions, vegetables, or firewood directly from the storage hopper into bags. Condition: Bedoz Tda Rjpfx Aktslp – Like new, hardly used – Fully functional – Inspection and test run possible by arrangement Included in the scope of delivery: – Bagging scale, model TN 260, with bulk material hopper 1,500 × 1,500 mm – “Gantry” for hand sewing machine with roller track, roller device, and aluminum spring tensioner (load capacity 4–6 kg) – new price €825 net – 2× hand sewing machine Union Special 4000A (bag sewing machine, single-thread chain stitch, with thread chain separator, 90 W) – new price €1,425 each net New price of the scale without accessories: €18,950 net. New price of the entire package: €22,625 net. Price: €10,000 net plus VAT (11,900 € gross) for the complete package, negotiable – VAT can be shown separately. Collection & shipping: – Location: 31848 Bad Münder am Deister – Loading will be assisted – Shipping by freight forwarder possible for an extra charge

Condition: used, Year of construction: 2018, operating hours: 300 h, functionality: fully functional, machine/vehicle number: 3016, film width: 780 mm, filling weight (max.): 20,000 g, filling weight (min.): 1,000 g, product height (min.): 100 mm, RADPAK RM-55AI bulk product packaging line – a complete installation For sale, a complete and fully functional bulk product packaging line for products such as: - pellets, - anthracite coal, - granulated fertilizers, - aggregates, - and other bulk materials. The machine enables the packaging of products into plastic bags weighing from 1 to 20 kg. It supports: - simple bags, - bags with a gusset, - bags with a top handle. The line consists of: - RADPAK RM-55AI packaging machine, - RW-04 weighing dispenser, - RC-50 take-off conveyor, - frame with an operating platform, - filling hopper with a bucket elevator, - dust extraction system (2 filters), - screw compressor, - compressed air storage tank, - compressed air dryer. Technical data Manufacturer: RADPAK Sp. z o.o., Włocławek Year of manufacture: 2018 Electrical power supply: 3 × 400 V AC + N + PE, 50 Hz Pneumatic power supply: 0.55–0.60 MPa Factory serial numbers: Bodpfxoz T Ahms Aktslp Packaging machine RM-55AI – no. 3016 Weighing dispenser RW-04 – no. 2093 Take-off conveyor RC-50 – no. 3018

Condition: used, Year of construction: 2019, operating hours: 14,105 h, 2019 | Caterpillar MH3024 | Used Material Handling Excavator | 14105 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 49300 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Bledpfxszua Rio Aktjp 👷‍♂️ Inspected by an independent expert 56 inspection points 44 approved ✅ 7 imperfect ℹ️ 5 issues ⚠️ 📌 Inspector's Comment: Poor materialhandler , leaking engine oil and hydraulic, welded pieces and broken materials, noisy pump and needs hydraulic oil , hour meter not verified, needs a big clean up and new front tires 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40859 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, first registration: 01/2002, Internal number for customer inquiries: 0-307-2 GLOGGER trailer for transporting long timber or long materials (!!! WITHOUT TRUCK !!!) Suspension: Leaf spring/leaf spring Twin tires: 315/80R22.5 Technically permissible total weight: 20,000 kg Blodpj Agrdaofx Aktjp Unladen weight: 3,500 kg Vehicle length: 4,300 mm Vehicle width: 2,550 mm Also available: LOGLIFT F251S 80A loading crane, year of manufacture 2006. Offered as a package for €15,000 net. Our sales team will be happy to answer any further questions. This is a non-binding offer. Subject to prior sale, errors and changes. = Further information = Year of construction: 2002 Mileage: 123 km Unladen weight: 3,500 kg Payload: 14,500 kg GVW: 18,000 kg

Condition: used, functionality: fully functional, machine/vehicle number: 155-10000, Year of construction: 2014, operating hours: 17,700 h, total length: 1,281 mm, total height: 1,962 mm, total width: 895 mm, type of input current: three-phase, overall weight: 601 kg, input voltage: 208 V, input current: 18 A, feed length X-axis: 406 mm, feed length Y-axis: 355 mm, feed length Z-axis: 406 mm, STRATASYS FORTUS 450mc INDUSTRIAL 3D PRINTER Located in ALBACETE, SPAIN US-built · Documented ULTEM licences · Material included From a professional service bureau that has now closed. Tested and fully functional: powers up, initialises and reaches Idle with no faults. === VERIFIED JOB HISTORY === We hold the machine's complete job history export, which records the material used on every job. 2,807 jobs recorded between December 2015 and October 2024. 2,478 completed successfully (88.3%). ULTEM 9085 — 662 jobs, the most-used material here; last run October 2024 ASA, 5 colours — approx. 1,315 jobs Nylon 12 — 205 jobs ABS-M30 and ABS-M30i — 204 jobs Polycarbonate (PC) — 164 jobs ULTEM 1010 — 155 jobs, 27 on the CG grade ABS-ESD7 — 98 jobs ST-130 — 4 jobs A machine will not print a material without its licence activated, so the history is direct evidence of licence status. We send the full file to any buyer who asks. === MACHINE DATA === Model: Stratasys Fortus 450mc, 3D Production System P/N: 155-10000 Manufacturer: Stratasys, Eden Prairie, Minnesota, USA Build date: December 2014 Technology: FDM, dual extruder, heated build chamber Build envelope: 406 × 355 × 406 mm Supply: 120/208 V, 18.0 A, 3W+N+PE, 50/60 Hz Approvals: TÜV SÜD NRTL (US/C), CE, FCC Part 15 Tips fitted: T16 model + T16 support Accumulated hours: approx. 17,700 h Weight: 601 kg · Dimensions: 1,281 × 895 × 1,962 mm Heavy use between 2016 and 2022, light use since. === US-BUILT MACHINE — 208 V === The machine sits in Albacete, but it is not a European machine. The data plate reads Stratasys, Eden Prairie, Minnesota (photograph in this listing): it is US specification, 208 V. In Spain it has run through a step-down transformer, which is supplied with it. For a US buyer this counts twice: it plugs straight in with no electrical conversion, and US-origin goods returning to the United States can enter under HTS 9801.00.10, with no time limit on US-origin products. === MATERIAL INCLUDED — approx. €7,270 === ULTEM 9085 and ULTEM 1010 with their supports, ST-130, PC-FR flame retardant, ABS-ESD7, ABS-M30 and M30i, ASA in five colours, PC-ISO and soluble supports SR-30, SR-100 and SR-110. Itemised inventory, canister by canister with remaining volume measured, in the attached PDF. Part of the stock is Stratasys original and part is validated third-party material (iSQUARED, and Kimya PC-FR under the Stratasys Validated Materials programme). === APPLICATIONS === Bledey U H Hmepfx Aktsp Aerospace, defence, automotive, medical, industrial tooling and functional prototyping. ULTEM 9085 meets FST (flame, smoke, toxicity) requirements, which suits this machine to aircraft interior parts and certifiable tooling. === TERMS === Location: Albacete, Spain · Availability: immediate Inspection: under power, by appointment Sale: EXW Albacete. The buyer arranges freight and customs; we handle loading, machine documentation and export paperwork at this end. Delivered: we can quote delivered if preferred. Reference: LOTE1-STRATASYS Full data sheet in the attached documents. Every figure comes from the machine itself and can be verified on inspection.

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change Bsdpfx Aoz E S E Rektelp The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: used, empty load weight: 5,710 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2017, suspension: air, load capacity: 36,290 kg, 20" 30" 40" 45" STORAGE BOX MANUAL DRAWER Bljdpfx Ako Af T D Nstop EXTENDABLE FRONT AND REAR LIFTABLE FIRST AXLE

Condition: used, empty load weight: 13,950 kg, maximum load weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2010, suspension: air, tire condition: 20 %, load capacity: 51,050 kg, • Extendable • First liftable axle • Self-steering last axle • Hydraulic outriggers • Hydraulic ramps Blsds Af T T Repfx Aktjp • Winch • Convoy kit • Tie-down rings • Platform height: 93cm • Usable length: 9.75m • Extension: 4.50m • Hydraulic widening system • Width: 2.50 to 3.10m • Rear inclined section: 2.00m • Gooseneck: 2.80m

Condition: good (used), Year of construction: 2020, The material separator from Koch Technik is for sale. The scope of supply includes: the price is per unit, 3 units in stock. 2 x KEM dosing station, version 3.7 – material locking mechanism – level sensor – hopper – pre-mixer, type G 1 x KEM Touch Material separator complete with the components listed above. Mixer, type G: complete with motor and container. Bedpfx Aoz Nxwvektslp Supply voltage: 230V.

Condition: good (used), Year of construction: 2021, Active hazardous material container, Protecto – used: Price at location: now only €19,950.00 instead of €29,500.00 (net), plus loading and transport costs! Manufacturer: Protecto Year of manufacture: 2021 Type: Hazardous material container SRC 3.2TA, galvanized Design with collection basin, insert shelves, and a ramp Air conditioning system with cooling, heating, and supply/exhaust ventilation External dimensions (W x D x H): 2985 x 4710 x 2470 mm Internal dimensions (W x D x H): 2770 x 4372 x 2051 mm Weight: 1821 kg Collection volume: 2 x 1000 liters Load capacity: 1000 kg/m² (evenly distributed load) Max. point load (200x200mm): 1.96 kN With DIBt approval Z-38.5-229 For the active storage of temperature-sensitive, water-polluting (WGK 1 - 3) as well as flammable and highly flammable liquids (H224, H225, H226) in conjunction with a technical ventilation system (accessory, not included) and in compliance with the safety distances according to TRGS 510, Media resistance according to DIN 6601 Surface: galvanized Walls and roof elements made of galvanized trapezoidal profiles and strong, galvanized end profiles 1-leaf or 2-leaf door selectable (see separate item) 100 mm ground clearance ensures that the container can be driven under and avoids contact corrosion; entry height 303 mm In addition, thermally insulated on five sides with 60 mm thermal insulation panels, laminated on both sides with galvanized sheets and a non-combustible insulation material, A1 according to DIN 4102 Surface: gray-white (inside) Roof designed for a snow load of 125 kg/m² Drainage via internal rainwater gutters Standing area with removable, galvanized grating (mesh size 44x44 mm) Basin material: Steel sheet S235JR according to DIN EN 10025, galvanized 1-leaf door for hazardous material container SRC External dimensions (W x H): 1290 x 1996 mm Clear door dimensions (W x H): 1240 x 1963 mm Handle set, mortise lock with drill-resistant cylinder, 2 keys Door stop: DIN right Ramp / access ramp, galvanized for hazardous material container SRC/MCS External dimensions W x D: 826 x 1250 mm Bodpfoz Tdznsx Aktelp Surface: galvanized Consisting of non-slip sheet metal 3/5 mm Former new price: €35,610.00 (net) Condition: good to very good, only disinfectants were stored inside. Available: immediately Location: 45279 Essen We will gladly send you the detailed documents upon request!

Condition: used, empty load weight: 5,600 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 12/2006, suspension: air, tire condition: 75 %, load capacity: 32,400 kg, • Pneumatic unlocking system • Electro-hydraulic power unit • Sliding carriage • Drum brakes Blodpfo Af T Swox Aktop

Condition: used, empty load weight: 4,700 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/1999, total length: 12,460 mm, suspension: air, tire condition: 55 %, load capacity: 33,300 kg, • Length: 12.46 m Bsdo Af T Slspfx Aktelp • Drum brakes

Condition: used, empty load weight: 4,500 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 05/2009, total length: 12,530 mm, suspension: air, tire condition: 85 %, load capacity: 33,500 kg, • Manual rear extension • Length: 12.53 m Bledpfx Akj Af T Szjtsp

Condition: used, empty load weight: 5,600 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2005, total length: 12,360 mm, suspension: air, tire condition: 80 %, load capacity: 32,400 kg, • Pneumatic unlocking mechanism Bedpfxj Af T Sds Aktelp • Electro-hydraulic power unit • Sliding carriage • Length: 12.36 m • Drum brakes

Condition: used, empty load weight: 5,800 kg, maximum load weight: 38,000 kg, axle configuration: 3 axles, first registration: 06/2018, suspension: air, tire condition: 45 %, load capacity: 32,200 kg, Multiple positions 1x20’, 2x20’, 40’, 45’ Last axle self-steering Pneumatic unlocking Sliding carriage on hydraulic cylinder with electric power supply Extendable rear bumper Bledpj Af T Uvefx Aktjp WABCO Smartboard Disc brakes

Condition: used, empty load weight: 5,720 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, first registration: 07/2019, suspension: air, tire condition: 30 %, load capacity: 36,280 kg, • Multi-position Bedpfx As Af T Hkoktslp 20’, 30’, 40’, 45’ • Extendable front and rear • Pneumatic unlocking • Pneumatic rear sliding extension • Storage box • Disc brakes • First axle liftable • Third axle self-steering

Condition: good (used), mileage: 1,17,364 km, power: 335 kW (455.47 HP), first registration: 06/2019, fuel type: diesel, axle configuration: 6x2, fuel: diesel, fuel tank capacity: 255 l, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, power mirror, soot filter, tachograph, trailer coupling, = Additional options and accessories = Bledps Ahrvzofx Aktop - 12-volt socket - Aluminum fuel tank - Armrest - Remote central locking - Speed limiter - Radio - Rear view camera - Sun visor - Lane keeping assist - Power take-off (PTO) - Tow hitch = Additional information = General information Number of doors: 2 Model year: 2026 Technical information Torque: 2200 Nm Number of cylinders: 6 Engine displacement: 10,677 cc Transmission: Mercedes-Benz G211-12, 12 gears, automatic Axle brand: Anders Front axle: Steered Weights Unladen weight: 15,250 kg Payload: 10,750 kg GVWR: 26,000 kg Functional Crane: MKG HLK 221 A3 including stone/pallet clamp, year of manufacture 2019, at the rear of the chassis Interior Interior: black Maintenance APK (technical inspection): New TÜV (technical inspection) upon delivery Condition Technical condition: good Optical condition: good Number of keys: 2 (2 remote controls) Financial information Inquire about financing options Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Year of construction: 2006, condition: used, Year of manufacture: 2006 Colour: Grey Empty weight: 2.000 kg Dimensions (LxBxH): 215 x 240 x 210 cm - Year: 2006 - Transport dimensions: 2150mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 2000kg Blsdezry N Tjpfx Aktjp - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Unwinding reel for coil material, DREHER - DIMECO Type 2370 BF Model 653, Year of manufacture 1979 Coil weight max. 2000 kg Coil width max. 320 mm Coil width with guide arms max. 320 mm Coil width without guide arms max. 480 mm Coil inner diameter 340-540 mm Coil outer diameter max. 1400 mm Center of reel crown to floor 900 mm Center of reel crown to reel base 870 mm Reel shaft, support shaft Ø 90 mm - Central spreading adjustment of the reel crown via hand crank (square drive 24 mm) - Mechanical brake on the reel shaft with manual brake force adjustment via hand crank - 6 coil guide arms 500 mm, with toggle clamp Bsdpfjz R D Snjx Aktelp - Conversion to motor drive possible, motor mount available, sprocket for roller chain on the reel shaft available Footprint: Width: 170 cm x Depth: 138 cm x Height: 160 cm Space required for transport: Width: 78 cm x Depth: 138 cm x Height: 120 cm Weight 430 kg Good condition

Condition: used, functionality: fully functional, power: 96 kW (130.52 HP), fuel type: diesel, overall weight: 36,000 kg, Year of construction: 2014, machine/vehicle number: 14254, Equipment: Upper deck: 5.480 x 1.750 mm (L x W) Medium aggregate belt: 900 mm (W) Fine material belt: 1,000 mm (W) Plate belt: 1,400 mm (W) Capacity: 8.5 m³ Engine / Power: CAT / 96 kW Oversize aggregate belt: 1,600 mm (W) Bledpfx Ake Adnyzstsp Lower deck: 5,000 x 1,750 mm (L x W) Weight: 36,000 kg Transport dimensions: 16,335 x 3,200 x 3,000 mm (L x W x H)

Year of construction: 2022, condition: used, functionality: unexamined, For sale is a package of six Cavitec system modules for processing web-shaped materials: two identical laminating/pressing calenders, two stationary winding stations, and two mobile winding stations. The modules come from a coating or laminating environment for technical textiles, nonwovens, films, or membranes. Position 1: 1 × Cavitec laminating unit / laminating calender Bledpjzr Hh Njfx Aktop Position 2: 1 × Cavitec delaminating unit / identical pressing calender Position 3–4: 2 × stationary Cavitec winding stations; suitability for use as unwinder or rewinder for technical materials to be determined Position 5: 1 × mobile unwinder Position 6: 1 × mobile rewinder Proof of origin: Purchase contract from 2022 with historical photo documentation available. Preferably sold as a complete package; partial sale by agreement. Sale basis: Used, as inspected; dismantling, loading, and transport by agreement. The system is located in 06502 Thale.