Used Mazak Super Quick Turn 10 Ms for sale (301)

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,778 mm, table load: 500 kg, overall weight: 4,920 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak VCN410 was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine includes a table size of 900 x 410 mm and a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Mazak VCN410 vertical machining centre we have for sale. Contact us for further details. • Table dimensions: 900 x 410 mm • Spindle taper: No. 40 (CAT 40) • Rapid traverse (X/Y/Z): 36 m/min • Spindle motor: AC 18.5/15/11/7.5 kW • Power supply: 3-phase, 200 V, 50 Hz • Rated capacity: 28.3/23.32 kVA • Compressed air: 5 bar / 200 l/min • Floor space: 2,000 x 2,600 mm Godpfx Aajy R D N Rs Esbw • Standard equipment: flood cooling, tool life monitoring, worklight Additional equipment • Chip conveyor (hinge type) • Coolant tank • Chip bucket

Condition: used, Year of construction: 2023, x-travel 3000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 15 kW distance spindle centre table top edge 140 - 860 mm table load 2500 Kg rapid travel x/y/z 50 m/min table width 3500 mm table length 820 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 500 l total power requirement 46,7 kW weight of the machine ca. 15,4 t dimensions of the machine ca. 5,3 x 3,6 x 3,3 m Standard machine including the following optional extras: - Provision for dual oil mist extraction - Air cooling via the rotating milling spindle - 48-tool magazine - Pulse handwheel - 3-colour LED signal light - Additional work area lighting - Air blow-off device on the milling spindle - High-pressure coolant supply through the spindle (15 bar) - Provision for MAZAK Monitoring - Chip conveyor with left-hand ejection (Crowther) - Manual grease gun - Grease cartridge - Mazak API - Drilling cycle with automatic chip breaking - Synchronous thread cutting - Rapid traverse with constant angle of inclination STANDARD ACCESSORIES Adaptation for the European market USB port (1 port) Mazak standard colour Work area lighting SAFETY FEATURES Operator door with interlock switch Work area cladding The splash guard enclosure encloses the work area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply via spindle (pump pressure = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles Gedjyvvluspfx Aa Esbw for the efficient production of high-quality components. FACTORY AUTOMATION Automatic start/stop and warm-up function Automatic activation of a warm-up via digital timer MEASURING SYSTEM Tool length measurement and tool breakage detection NUMERICAL CONTROL Horizontally adjustable NC control panel Relocation Detector Mazatrol SmoothG control 19" colour LCD screen (touch screen) Mazak Tornado tapping/drilling cycle (Mazatrol) EIA/ISO input function Tool path verification in the background 3D coordinate conversion Shape compensation for rotating axes Mazacc-2D software (contour correction) Mazacc-3D software package MAZACC-3D high-speed software package (NO456) is additionally required. Control system with high smoothing Interface for LAN SD memory card interface Smooth Standard Software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High-precision control for finishing - Seamless corner point control - Variable acceleration control - Ultra-high-speed machining mode - NO498 Rapid traverse paths, rounding function Absolute positioning system - All dimensions, weights and performance specifications are subject to change - - Used machine without warranty - - Subject to prior sale -

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: MAZATROL, controller model: 640M Nexus, number of axes: 4, This 4-axis Mazak NEXUS HCN 6000 was manufactured in 2006. It features a Mazatrol 640M Nexus control, 800 mm travel in X, Y, and Z axes, and a B-axis rotation of 360°. The spindle speed reaches up to 10,000 rpm, and it includes a 120-position tool magazine. The table can handle loads up to 1,000 Kg. Consider the opportunity to buy this Mazak NEXUS HCN 6000 turn-mill centre. Contact us for more information. • B-axis rotation: 360° • Table size: 500 x 500 mm • Permissible load: 1,000 kg • Tool magazine: 120 positions • High pressure coolant: 70 bar Additional equipment • Chip evacuator (chip conveyor) Gbjdpfxoygl Ncs Aa Ejw Technical Specification Taper Size ISO 50

Year of construction: 2016, condition: used, Number of machnines 10 0 Cycle time . /min production capacity . Control . Everything must go due to business closure: High-quality machining centers (Deckel Maho, DMG, Mazak, Spinner) & accessories, cabinets, vices, material, grinding machines, EDM machine, measuring machine, on July 16, 2026 Dear Sir or Madam, dear business partners and interested parties, Due to the complete liquidation of the mechanical engineering company Schröter Maschinenbau GmbH, we are organizing an exclusive, one-day sale for the entire company, machine, and workshop equipment. Take this opportunity to acquire professional production facilities and extensive accessories directly from the location. Prospectus & Sale Overview: • Date: Thursday, July 16, 2026 • Time: 9:00 AM to 2:00 PM • Address: Lenneperstr. 188, 42855 Remscheid • Type of Sale: Direct sale against cash payment / or upon pickup and loading. You will receive an invoice. Ex location. Excerpt from the Sales Portfolio: • Multiple CNC Machining Centers: High-precision milling and drilling centers in ready-to-use condition. • Extensive Accessories: Tool holders, clamping devices, vices, measuring technology, and precision tools. • Workshop Equipment: Heavy-duty shelving, workbenches, workshop trolleys, as well as various hand and power tools. Get an Impression: To give you a precise picture of the machines, their condition, and the available accessories in advance, we have compiled a digital overview with photos and technical details for you. Simply click on the following link: ?usp=drive_link Important Notes: The sale is strictly on an "as is, where is" basis and excludes any warranty. The buyer is solely responsible for the dismantling, disassembly, and transport of the purchased items. Please plan your visit well in advance! We will close the gates at 2:00 PM. Should it run a bit later, please feel free to contact us by phone! We look forward to your attendance. Gbodpszk Rc Ijfx Aa Eew

Condition: good (used), Year of construction: 2004, turning length: 1,000 mm, Manufacturer: MAZAK Type: QTN 250 Gbodpfxjwaiinj Aa Eew Control: MAZATROL 640T NEXUS Year of Manufacture: 2004 Specifications Metric US Standard Max. Turning Diameter 675 mm X-Axis 230 mm Z-Axis 1025 mm Spindle Bore 77 mm Speed 4000 rpm Spindle Power 26 kW Tool Changer 12-Hole Quill Mount 5 Mk Dimensions (Estimate) Length 3800 mm Width 1800 mm Height 2000 mm Weight 5200 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Year of construction: 2000, condition: ready for operation (used), General Data Measurements width 2105 mm Measurements depth 3485 mm Machine weight 7500 kg Control Unit Brand MAZATROL Main Drive Spindle speed range 3500–5000 Gbjdjx D N Ipopfx Aa Eow Spindle bore 61 mm Number of axis 4 Movement X-Axis Movement 530 mm X-Axis Feed Force 0–6000 mm/min X-Axis Rapid Traverse 30 m/min Y-Axis Movement ±70 mm Y-Axis Feed Force 0–6000 mm/min Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 1065 mm Z-Axis Feed Force 0–6000 mm/min Z-Axis Rapid Traverse 33 m/min Tail Stock Pinol diameter 80 mm Pinol way 870 mm Pinol tool taper MK4 Tools Number of station 20 Max weight 7 kg Max tool diameter 90 mm Max tool length 250 mm This 4-axis Mazak INTEGREX 200 Y was manufactured in 2000. It features a maximum turning diameter of 540 mm, a swing diameter of 540 mm, and a bar diameter capacity of 51 mm. The machine supports a workpiece weight up to 150 kg and offers a spindle speed range up to 5,000 rpm. It includes a Mazak KM 63 quick change tool system with 20 slots. If you are looking to get high-quality turning capabilities, consider the Mazak INTEGREX 200 Y machine we have for sale. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, Equipment: documentation/manual, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 Gbodpfx Aezv Sfbja Eow Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: good (used), Year of construction: 2001, functionality: fully functional, travel distance X-axis: 710 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: Fusion 640M, workpiece height (max.): 710 mm, workpiece diameter (max.): 730 mm, workpiece weight (max.): 500 kg, total height: 3,050 mm, total length: 10,145 mm, total width: 9,850 mm, table width: 500 mm, table length: 500 mm, table load: 500 kg, overall weight: 11,600 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 15 bar, spindle motor power: 30 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this Mazak FH 5800 with the Mazak Palletech system. This machine was manufactured in 2001 and is fitted with the Mazatrol Fusion 640M control system. It is a robust and precise machine, suitable for efficient machining and batch production. Thanks to the horizontal spindle and pallet configuration, the machine is suitable for versatile machining operations and high productivity. The Mazak Palletech automation system enables more efficient and unmanned production. Technical specifications: Table dimensions: 500 x 500 mm Gedsz Rmq Tepfx Aa Eobw Number of pallets: 10 Table load capacity: 500 kg X-axis travel: 710 mm Y-axis travel: 610 mm Z-axis travel: 660 mm Table indexing: 360° in 1° increments Spindle mount: DIN 69871A/40 Spindle speed: 35 – 15,000 rpm Spindle motor: 30/22 kW Magazine capacity: 120 positions We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 13,169 h, travel distance X-axis: 1,050 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: Matrix Nexus, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 6,920 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Mazak Vertical Center Nexus 510C-II was manufactured in 2008. It features an impressive X-axis travel of 1050 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1300 x 550 mm and a maximum table load of 1200 kg. If you are looking to get high-quality machining capabilities, consider the Mazak Vertical Center Nexus 510C-II machine we have for sale. Contact us for further details. Gbodpozl S S Tsfx Aa Eow - Control System: Mazatrol Matrix Nexus (with Mazak Voice Adviser)- Axis Travel X/Y/Z: 1050 / 510 / 510 mm- Table Dimensions: 1300 x 550 mm- Maximum Table Load: 1200 kg- Spindle Speed: Up to 12000 rpm- Spindle Details: Completely renewed in September 2025 by Mazak factory service (original replacement spindle cartridge, high-precision version, clamping force 10.1 kN, runout 0.002-0.005 mm)- Tool Taper: SK 40 / BT 40- Tool Magazine Capacity: 30 stations- Tool Changer Type: Double gripper changer- Rapid Traverse Rate: Up to 42 m/min- Total Power-On Time: 46722 hours (as of 07.07.2026)- Automatic Operation Time: 17776 hours- Cutting Time: 15817 hours- Pure Cutting Time: 13169 hours- Weight: Approx. 6920 kg- Power Supply: 3AC 380 V, 50/60 Hz, approx. 33.8 kVA- Control Circuit: AC100V, DC24V- Main Motor: Max. 47 A, 400 V- Included Accessories / Components:* Chip conveyor (chain conveyor) with discharge to chip container* Donaldson Torit DCE oil mist separator* Portable electronic handwheel* Coolant system with spray gun / compressed air gun* Machine vise (NC vise)* Approx. 100 SK 40 tool holders* Tilting chip container (green cart)* Worklight / interior lighting* Full enclosure- Renewed parts during 09/2025 service: Spindle cartridge, rotary joint, non-return valves, filters for air/lubricating oil, oil mist separator element Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2010, Mazak VTC820/30 3-Axis Machining Centre. S/No. 200131 (2010) with Mazatrol Matrix Control, X/Y/Z Travels 3000/800/720mm, Table 3500mm x 820mm, Spindle Speed 18,000rpm, Spindle Taper BT40, B Axis Swivel Head +/- 110, Removable Centre Partition. Country of Origin: United Kingdom Please Note: There are no loading facilities on site, dismantling and loading will be at the cost of the purchaser. Location: These lots are located in Birmingham & Wolverhampton, UK. Please see individual lot for loading information and charges. Blocking and securing will be at the cost of the purchaser. Gedpfx Aas Afnlas Eebw

Condition: like new (used), Year of construction: 2022, operating hours: 10,000 h, functionality: fully functional, number of slots in tool magazine: 80, MAZAK HCN-5000 Horizontal Machining Center Year 2024 Control Unit: Smooth G X-axis travel: 730 Gjdpfx Aaez Aauks Eobw Y-axis travel: 730 Z-axis travel: 800 Table length: 500 Table width: 500 Maximum workpiece dimensions (length x width x height): D.800x1000 Table surface: Tapped holes Maximum workpiece weight: 700 kg Spindle speed: 18000 rpm (high torque) Spindle taper: ISO 40 Rapid traverse rate (X-axis): 60,000 Rapid traverse rate (Y-axis): 60,000 Rapid traverse rate (Z-axis): 60,000 Number of tools (ATC): 40-60-80 Maximum tool diameter (ATC): D. 95 D.170 Maximum tool length (from reference line) (ATC): 170 Tool selection method (ATC): FIXED Maximum tool weight (ATC): 12 Tool change time (ATC): 2.8 Coolant pressure: 15 Bar Coolant tank capacity: 500L Height (machine dimensions): 2813 Width (machine dimensions): 2623 Depth (machine dimensions): 5769 Weight (machine dimensions): 11430 Pallet size: 500x500

Condition: good (used), Year of construction: 1998, Vertical Machining Center Mazak VTC-20C The machine is in fully operational condition and has undergone comprehensive service maintenance. You are welcome to inspect it. In 2025, the spindle of the MAZAK VTC-20C was overhauled. Please find some key details from the technical specification below. If you require any additional information, please do not hesitate to ask. Specification | Value ---|--- X-axis travel | 1,660 mm Y-axis travel | 510 mm Z-axis travel | 510 mm Distance from table surface to spindle nose | 180–690 mm Distance from column front to spindle centerline | 550 mm Working table area | 2,000 × 510 mm Maximum table load (uniform load) | 1,000 kg Spindle speed | 40–7,000 rpm Spindle motor power – 10 min rating | 11 kW Spindle motor power – 30 min rating | 7.5 kW Spindle motor power – continuous | 5.5 kW Spindle taper | 7/24 taper No. 40 X-axis rapid traverse | 24,000 mm/min Y-axis rapid traverse | 24,000 mm/min Z-axis rapid traverse | 20,000 mm/min X-axis cutting feed rate | 1–5,000 mm/min Y-axis cutting feed rate | 1–5,000 mm/min Z-axis cutting feed rate | 1–5,000 mm/min Tool magazine capacity | 24 tools Tool selection system | Tool holder No. fixed-address system (automatic short-cut system) Tool shank | NT-40 Pull stud bolt | Yamazaki-made ANSI type Maximum permissible tool diameter | Ø80 mm Maximum tool diameter with adjacent pocket empty | Ø110 mm Maximum permissible tool length | 350 mm (from gauge line) Maximum permissible tool weight | 8 kg (including tool shank and pull stud bolt) Maximum total tool weight in magazine | 96 kg (average 4 kg × 24 tools) Gsdpovurd Eofx Aa Esbw Machine weight | 7,215 kg Machine height from floor | 2,701 mm Required floor area | 4,000 × 2,990 mm

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 157626, Manufacturer: Mazak Model: Integrex 200-2SY Controller: Mazatrol PC Fusion CNC 640 Robot NOT included Max. Machining diameter: 540 mm Max. Machining length: 1018 mm Spindlebore: 51 mm Spindlepower: 22 kW 5000 rpm Travel: X = 530 mm Z = 1065 mm Gbsdpjvlxf Dsfx Aa Eew Machine weight: 7800 kg. Machine dimensions: L=5200 x W=2500 x H=2750 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 172087, turning diameter: 660 mm, spindle bore: 76 mm, spindle speed (max.): 5,000 rpm, controller model: MAZATROL Fusion 640 MT, spindle torque (max.): 349 Nm, TECHNICAL DETAILS Maximum turning diameter: 660 mm Main spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 22 / 15 kW Maximum torque: 349 Nm Spindle bore: 76 mm Chuck diameter: 210 mm C-axis indexing: 0.0001° Sub-spindle Speed range: 35–5,000 rpm Power (10 min / continuous operation): 18.5 / 15 kW Maximum torque: 326 Nm Chuck diameter: 210 mm C-axis indexing: 0.0001° Cooling Coolant tank volume: 300 l Pump capacity: 20 l/min Pump pressure: 5 bar Compressed air requirement: 5 bar, 500 l/min MACHINE DETAILS Control model: MAZATROL Fusion 640 MT Total power consumption: 66 kVA Operating voltage: 400 V / 50 Hz EQUIPMENT Technical documentation Chip conveyor with cooling system Gsdszgufrjpfx Aa Eobw 20-position tool magazine B-axis (positioning in 0.001° increments) C-axis Y-axis Milling spindle Angular positioning of the sub-spindle Synchronization of main and sub-spindle Tool setting system (Tool Eye) Interlock for the front door Complete cooling system Interface for IC memory card

Condition: ready for operation (used), Year of construction: 2006, operating hours: 66,174 h, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 510 mm, total height: 2,778 mm, table load: 500 kg, overall weight: 4,920 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis Mazak NEXUS 410A vertical machining centre was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a tool capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 410A machine we have for sale. Contact us for further details. • Table size: 900 x 410 mm • T-slots: 3 slots, 18 mm, 125 mm spacing • Spindle speed range: Stepless • Spindle taper: CAT 40 • Spindle bearing inner diameter: 70 mm • Spindle acceleration: 2.04 s • Rapid traverse: 36 m/min • Cutting feed: 1 to 8,000 mm/min (up to 36,000 mm/min) Gsdpfx Aajy Htgds Ejbw • Axis acceleration: 0.5 G • Max. tool diameter: 80 mm • Max. tool diameter (adjacent empty): 125 mm • Max. tool length: 350 mm • Tool change time: 2.9 s • Spindle motor (AC): 18.5 / 15 / 11 / 7.5 kW • Power requirement: 27.8 / 22.82 kVA • Air supply: 5 bar, 200 l/min • Footprint: 2,000 x 2,600 mm • Spindle hours: 66,174 h

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5000 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen Gjdpfx Ajv Dxw Rea Esbw User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: ready for operation (used), For sale: 4 Mazak machines – 1 milling machine and 3 lathes, all in working condition. Must be sold due to lack of space. 1 FJV 25 Gsdpfx Aae Agpy He Eobw 2 Qturn 8 1 Qturn 6 with robot Total price: €14,000.

Condition: excellent (used), Year of construction: 2008, Table size, pallet size: 500 x 500 mm Pallet quantity: 2 Maximum workpiece size: 730 x 500 mm Maximum table load: 500 kg Travel paths: X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm C-axis: 360° (turntable) A-axis: +30°/-120° (swivel table) Speed range: 12 000 rpm Tool holder: SK 40 Tool positions: 80 Internal tool cooling: 20 bar Main drive power: 26 KW Machine weight: 17 000 kg Space requirement (LxWxH): 5 500 x 4 000 x 3 400 mm Gjdpfx Aajr Drcms Ejbw Control system: Mazatrol Matrix Accessories: Chip conveyor, complete documentation for the machine.

Condition: used, Year of construction: 2008, Mazatrol Matrix CAM PC workstation with full-featured 5-axis license (incl. PCI card & PC) Description: A complete, ready-to-use PC workstation with the powerful Mazatrol Matrix CAM software is for sale. The license is perpetual and hardware-bound via a PCI card. The system was used on 5-axis machines (Integrex e-1060 V8/II) and includes rare high-end options. The PC has been recently reinstalled and is fully functional. Ideal for companies with an older Mazak machine park looking for an independent programming solution. Details on license & options: The following key options are unlocked and active (see photos): - 40 SIMULTANEOUS 5 AXIS (simultaneous 5-axis machining) - 49 TILTED WORKING PLANE - 55 TOOL CENTER POINT CONTROL Gedpfxjx Sq Nme Aa Eobw Additional basic options such as EIA, Smoothing Control, Spiral, etc. (see photo of the options menu) Scope of delivery: - PC system: Windows 7 Pro x86 (32 Bit), Intel i5-3470 3.2 GHz, 4 GB RAM, AMD Radeon HD7570 GPU. - The fully functional computer with installed operating system (Windows 7 Pro_x86) and pre-installed software. - PCI license card: The physical license hardware installed in the PC. - Original packaging: The original packaging of the software as shown. Documentation: Manual, original CDs/media

Condition: used, Year of construction: 2003, operating hours: 53,000 h, machine/vehicle number: 672164914, control type: CNC control, controller manufacturer: Fanuc, laser type: CO₂ laser, laser source manufacturer: Panasonic, laser power: 2,500 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, pipe diameter (max.): 300 mm, pipe length (max.): 3,000 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,300 mm, working width: 1,500 mm, working height: 300 mm, travel distance X-axis: 3,300 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, workpiece weight (max.): 750 kg, type of input current: AC, type of cooling: water, overall weight: 15,000 kg, total length: 9,000 mm, total width: 2,500 mm, total height: 2,500 mm, year of last overhaul: 2025, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, We are offering this used Mazak Spacegear MK2 2.5 kW 2D/3D laser cutting machine, manufactured in 2003. Manufacturer: Mazak Model: Spacegear MK2 Machine type: 2D/3D laser cutting machine Gbjdo Ahxbnjpfx Aa Ejw Laser power: 2.5 kW Year of manufacture: 2003 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,721 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Mazak, controller model: Preview 3, laser type: fiber laser, laser source manufacturer: IPG, laser source model: CUT, laser hours: 6,721 h, laser power: 3,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, table length: 3,050 mm, table width: 1,515 mm, working length: 3,050 mm, working width: 1,515 mm, positioning speed: 60 m/min, positioning accuracy: 0.001 mm, repeat accuracy: 0.001 mm, type of cooling: water, overall weight: 12,000 kg, warranty duration: 6 months, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale: a reliable Mazak Optiplex Nexus Fiber laser cutting machine priced at €110,000. The machine has minimal mileage and has been serviced by us since day one. The laser is available immediately, free of bank charges. We provide a 6-month warranty on the machine, extendable to 12 months. Comprehensive machine relocation within Poland is available for a maximum price of 33,000 PLN Relocation is available throughout the EU. An original Mazak EMC loading and unloading system is available for €50,000. Cutting tests are available at any time. Machine details: Brand: Mazak Model: Optiplex Nexus Fiber Power: 3kW IPG Year of manufacture: 2016 Source on time: 6721h Controller on time: 7750h Automatic operation time: 3357h Mazak Control Torch 1.0 head with nozzle cooling option Controller: Mazak Preview 3 Automatic nozzle changing with 8-nozzle magazine Gbedeyguc Eepfx Aa Eew Automatic focus Intelligent head functions 2 interchangeable tables with sheet lifter Donaldson Spark4Pro dust collector IPG source and cooler Collimator Group provides comprehensive service for Mazak laser machines. From service to sales. If you are interested in a different model, higher power, or a different budget, please contact us. Collimator-group.pl

Condition: used, Year of construction: 2007, spindle speed (max.): 4,000 rpm, travel distance X-axis: 310 mm, travel distance Z-axis: 605 mm, CNC Lathe Manufacturer: MAZAK Model: Multiplex 6300 Year of manufacture: 2007 Control: MAZATROL 640T Technical specifications: - Swing diameter: 430 mm - Distance between spindles: 1450 mm - X-axis: 310 mm Gbedpeyb S Nrsfx Aa Eew - Z-axis: 605 mm - Spindle speed: 4,000 rpm Equipment & accessories: - Gantry loader In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and workholding devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 470 mm, controller manufacturer: Mazatrol, controller model: SmoothX, workpiece height (max.): 320 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 200 kg, total height: 2,933 mm, total length: 3,650 mm, total width: 2,984 mm, overall weight: 6,800 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,114 h, coolant supply: 70 bar, spindle motor power: 15 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, We are pleased to offer this well-maintained CNC 5-axis vertical machining centre. It is a Mazak CV5-500 from fitted with the Mazatrol Smooth X control system. The machine is in a like new condition with 1114 spindlehours. Technical specifications: Table dimensions: Ø 500 mm Number of pallets: 1 Max. workpiece dimensions: 500 x 320 mm Gbjdpfx Aoz Ndxkja Ejw Max. workpiece weight: 200 kg X-axis travel: 730 mm Y-axis travel: 450 mm Z-axis travel: 470 mm C-axis (work table rotation): 360° B-axis travel: ±110 (220) ° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 15/11 kW Number of positions in tool magazine: 48 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. About Mamach Machinehandel: With over 40 years’ experience in the CNC machinery sector, we are now one of Europe’s leading suppliers of metalworking machinery. Our success is based on high quality, customer-focused service and a strong international network. Discover our wide range of used CNC lathes and machining centres – we’d be happy to advise you personally!

Condition: good (used), Year of construction: 2000, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, total height: 2,759 mm, total length: 4,060 mm, total width: 2,850 mm, table width: 510 mm, table length: 1,460 mm, overall weight: 6,100 kg, spindle speed (max.): 10,000 rpm, number of spindles: 1, number of slots in tool magazine: 24, Equipment: chip conveyor, We are offering this Mazak vertical machining center at a very competitive price. We are selling the machine “as is.” Of course, a live demonstration is possible. Due to export regulations, sale is limited to EU countries only. Technical details: Year of manufacture: 2000 Table dimensions: 1460 x 510 mm Table load capacity: 800 kg X-axis travel: 1120 mm Y-axis travel: 510 mm Z-axis travel: 510 mm Godpfxo Ahyrcj Aa Eebw Spindle taper: DIN 69871A/40 Spindle speed: 10,000 rpm Spindle motor: 15/11 kW Positions in tool magazine: 24

Condition: used, Year of construction: 2010, turning length: 1,495 mm, spindle speed (min.): 35 rpm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, workpiece weight (max.): 300 kg, total height: 2,577 mm, total length: 5,088 mm, total width: 2,450 mm, spindle nose: A2-6, spindle diameter: 660 mm, Equipment: documentation/manual, CNC Control Mazatrol Matrix Turning diameter 660 / 260 mm Gbjdpezqt Umofx Aa Esw Turning length 1495 mm Spindle bore diameter 65 mm Spindle nose A2-6 Spindle nose sub spindle A2-6 Turning speed spindle 35 - 5.000 R/min Turning speed sub spindle 35 - 5.500 R/min Milling head speed 15 - 12.000 R/min Movement X-axis 580 mm Movement Y-axis 160 mm Movement Z-axis 1.545 mm B-axis travel 225° C-axis indexing 0,0001 (360) ° Tool taper Capto C6 Tools in tool magazine 120 Barfeeder Irco-Breuning ILS-MUK If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.