Used Mazak Vcn 410 for sale (368)

Condition: used, Year of construction: 2007, Main data Djdeygipgepfx Afpekh - X travel (table longitudinal travel): 1050 mm - Y travel (table transverse travel): 530 mm - Z travel (spindle vertical travel): 510 mm Spindle - Spindle motor: AC 18.5 kW (5 min rating) - Rapid traverse X / Y / Z: 36 / 36 / 36 m/min - Tool magazine: 30 stations - Spindle taper: ISO 40 - Spindle bearings: Ø 70 / 110 mm - Speed range: 12,000 rpm - Number of speed ranges: Direct drive - Max torque: 95.5 Nm X-axis - X travel (table longitudinal travel): 1050 mm - Guides: Linear ball guides Y-axis - Y travel (table transverse travel): 530 mm - Rapid feed: 36 m/min - Working feed rate: 1 – 36,000 mm/min - Guides: Linear ball guides Z-axis - Z travel (spindle vertical travel): 510 mm - Spindle nose to table top distance: 150 – 660 mm - Distance from column to spindle center: 576 mm

Condition: used, Year of construction: 2011, MACHINE SPECIFICATION MAZAK VARIAXIS 500-5X II Robot is not included. - X travel (spindle longitudinal travel): 510 mm - Y travel (table transverse travel): 510 mm - Z travel (spindle vertical travel): 460 mm - A-axis (table tilt): -120° to +30° - C-axis (table rotation): ±360° Spindle: - Spindle motor AC: 22.0 kW / 15 min rating - Rapid traverse X, Y, Z: 52 m/min - Tool magazine: 40 stations - Spindle taper: ISO 40 - Spindle motor AC: 22.0 kW / 15 min - Spindle bearing bore / outer diameter: Ø 80 / 110 mm - Speed range: 35 – 12,000 rpm - Max torque: 143 Nm @ 15% ED Axes details: X-axis (spindle longitudinal travel) - Travel: 510 mm - Rapid feed rate: 52 m/min Dodpfx Asygimlefpjkh - Working feed rate: 1 – 52,000 mm/min - Guides: Linear ball guides Y-axis (table transverse travel) - Travel: 510 mm - Rapid feed rate: 52 m/min - Working feed rate: 1 – 52,000 mm/min - Guides: Linear ball guides Z-axis (spindle vertical travel) - Travel: 460 mm - Spindle nose to table top distance: 190 – 650 mm - Spindle nose to table center distance: 140 – 600 mm - Rapid feed rate: 52 m/min - Working feed rate: 1 – 52,000 mm/min A-axis (table tilt) - Range: -120° to +30° - Minimum positioning increment: 0.0001° - Locking torque: 2,156 Nm - Positioning time for 90°: 1.9 s C-axis (table rotation) - Range: ±360° - Minimum positioning increment: 0.0001° - Locking torque: 2,156 Nm - Positioning time for 90°: 1.5 s Accuracy: - Positioning accuracy X, Y, Z: 0.012 mm - Positioning accuracy A, C: 21 / 14 arc sec - Repeatability X, Y, Z: 0.007 mm - Repeatability A, C: 12 / 8 arc sec Tool changer: - Type: Chain with double arm - Number of tool positions: 40 stations - Tool selection: shortest path search - Max tool diameter: Ø 80 mm - Max tool diameter when adjacent pocket is empty: Ø 125 mm - Max tool weight: 8 kg - Max tool length: 300 mm - Tool taper: CAT 40 - Pull stud: ANSI 40 type Mazak - Tool change time (chip-to-chip): approx. 4.5 s Table: - Table size: Ø 500 mm x 400 mm - Max uniformly distributed load: 300 kg - Table equipped with T-slots: 5 slots, 80 mm pitch - Center hole: Ø 50 H6 - Table height above floor: approx. 800 mm Coolant: - Through-spindle coolant: 15 bar - Tank capacity: approx. 250 L - Coolant filtration: filter - Flush nozzle: at spindle nose Miscellaneous: - Floor space (standard machine): approx. 2805 x 2950 mm - Machine height (standard): approx. 2838 mm - Weight: approx. 7,500 kg - Total fuse / power supply requirement: 50 kVA Included / options and features: - 40 tool stations - Tool identification system including pull stud with ID chip - Tool length measurement - Through-spindle coolant 15 bar + Through-Air - Spindle cooling - Machine lighting - Cooling through the ball screws on X, Y, and Z axes - HSM function for 2-D machining - Mazak “Tornado” for threading and milling - Synchronized feed/speed during threading - ISO/EIA programming - CE marking in accordance with European regulations VARIAXIS500II – Quantity: 1 unit MAZAK VARIAXIS 500-II 5X Vertical 5-axis multi-operation machine equipped with Mazatrol Matrix control system for simultaneous (ISO‑programmed) 4- and 5‑axis machining. Options / items listed: - MAZ85330 – 1 pcs – Through-spindle coolant, 15 bar - MAZ80551 – 1 pcs – Chip conveyor to side - MAZ71190X – 1 pcs – High-speed function type 1, only for ISO/EIA - High-speed function MAZACC-3D G05 P2 - Smooth transitions G61.1 - Contour compensation via parameter settings

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. Dkjdpfx Afswix Hhjpoh size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm Dsdowix E Ropfx Afpokh z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, *

Condition: used, Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, For sale: Mazak EMC 3015 automatic sheet metal loading and unloading system, Extensible Manufacturing Cell. A new one costs approximately €130,000. The system is practically new. Used with a machine with 2,000 hours of operation, and only occasionally. Manufactured in 2016. High Column model, compatible with the following Mazak machines: Optiplex, Optiplex Nexus, SpaceGear, Optiplex NEO Maximum sheet dimensions: 3000x1500mm Maximum sheet weight: 900kg. Dedpfx Aeyh N Rdsfpskh Unloading station: max. 2000kg. Sheet metal loading queue management system. Colimator-group.pl

Condition: ready for operation (used), Year of construction: 2001, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,480 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: 640 M-PC, total height: 3,550 mm, overall weight: 27,000 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 29,800 W, number of slots in tool magazine: 60, number of axes: 3, This 3-axis Mazak FJV 60/120 vertical machining center was manufactured in 2001. It offers robust capabilities for precision machining. If you are looking to get high-quality milling capabilities, consider the Mazak FJV 60/120 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits • Machine is fully functional • Including machine documentation Extra Information Djdpfx Asx D E H Uefpskh Machine still under power Dimensions Machine Depth 8600 mm Technical Specification Taper Size SK 50

Condition: used, Year of construction: 2008, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm table speeds: 500 rpm Djdpfoyhp A Aex Afpekh table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Control: MAZATROL 640 workpiece diameter, max.: 1.050 mm workpiece length, max.: 1.000 mm Max. Spindle speed: 10.000 rpm table speeds: 500 rpm table drive: 37 kW number of tools: 80 number of paletts: 2 chucking diameter: 800 mm Dsdpfx Ajyhm Rwefpokh

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MSY Djdeyhwy Iepfx Afpjkh Max. turning diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck for secondary spindle, diameter 169 mm - Tool Eye - C-axis - C-axis on sub-spindle - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Condition: used, Year of construction: 2019, x-travel 2.000 mm y-travel 820 mm z-travel 720 mm Control Mazatrol Smooth G spindle taper SK 40 spindle turning speed range 35 - 12.000 U/min spindle motor 22 kW distance spindle centre table top edge 140 - 860 mm table load 1700 Kg rapid travel x/y/z 50 m/min table width 820 mm table length 2500 mm table height over floor 870 mm T-slots 7 T-slot - width 18 mm T-slot - distance 100 mm tool change unit 48 tool changing time 4,7 sec Dodpfx Afjtuggcjpokh wotkpiece diameter with 2 vacant positions 130 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 260 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 450 l high-performance coolant system 25 bar total power requirement 46,7 kW weight of the machine ca. 14,8 t dimensions of the machine ca. 4,3 x 3,6 x 3,1 m STANDARD ACCESSORIES Transformer for the European market USB port (1 port) Mazak standard colour Spindle speed 12,000 min-1 (steep taper 40) Work area lighting SAFETY DEVICES Operator door with locking switch Work area panelling The splash guard encloses the working area from the side. Fully enclosed work area Protection against chips, coolant and access to the work area during automatic machining. Safety precautions in accordance with global standards COOLANT SUPPLY Coolant supply through spindle (pressure at the pump = 5 bar) Complete coolant system includes pumps, valves, pipework and nozzles for the efficient production of quality components. FACTORY AUTOMATION Automatic switch on/off and warm-up function Automatic switch-on of a warm-up cycle via digital timer MEASUREMENT SYSTEM Tool length measurement and tool breakage detection CHIP DISPOSAL Factory preparation for chip conveyor (left) NUMERICAL CONTROL Fixed control/operating unit Relocation Detector Mazatrol SmoothG control unit 19" LCD colour screen (touch screen) Mazak tapping/drilling cycle Tornado (Mazatrol) By drilling and tapping in helical machining mode, a wide range of diameters a wide range of diameters can be machined at high speed with a wide range of diameters can be machined at high speed with just one tool. This function minimises programming and machining times. EIA/ISO input function Tool path check in the background The tool path of a programme can be checked even if another programme number is programme number is called up and processed in automatic mode. 3D coordinate conversion Shape compensation for rotating axes Mazacc 2D software (contour correction) Accuracy is maintained at high feed rates. Mazacc-3D software package for high-speed machining High-speed and high-accuracy machining for contours defined in the finest programme contours defined in the finest programme increments. MAZACC-3D high-speed software package (NO456) is additionally required. Control with high smoothing Interface for LAN SD Memory Card I/F Smooth standard software for M/C - NO443 B) MAZACC-2D software (workpiece shape compensation) - NO444 D) MAZACC-3D high-speed software package - NO445 B) Shape compensation for rotating axes - NO497 D) High accuracy control for finishing operations - Seamless corner point control - Variable acceleration control - Ultra high speed machining mode - NO498 Rapid traverse paths Rounding function Absolute positioning system Machine incl. the f...

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function Dkedewngklspfx Afpoh EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Dedjv Dxw Ropfx Afpekh Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty -

Condition: used, Year of construction: 1987, Technical details: x-travel: 760 mm y-travel: 450 mm z-travel: 500 mm control: Mazatrol CAM M-2 tool changer with: 30 tools (Kettenmagazin) Plätze spindle taper MT: ISO 40 Revolution per minute: 28 - 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 2.000 mm/min max. torque on the spindle: ca. 23 Nm rapid traverse:: X / Y: 24 m/min rapid traverse:: Z: 15 m/min. bore capacity in steel (diameter): Ø 40 mm table-size: 500 x 1150 mm Dodjvc Avbspfx Afpskh table load capacity - central/maximum: 700 kp total power requirement: 11 kW (24,4 kVA) kW Weight approx.: 6,8 t dimension machine xH: 3,7 x 2,5 x 2,6 m chip conveyor: L: 3,7 x B: 0,75 x H: 1,35 m ATC tool magazine for 30 tools up to Ø 100mm x 330mm, SK40 Hinged belt chip conveyor Knoll-120S-1 with ejection height of 1130mm Coolant tank with pump, 200liter capacity, 30 l/min. Operation via control panel with boom 2000mm. accessories: cooling lubricant pump Base plates *

Condition: good (used), Year of construction: 1998, Mazatrol T-Plus control Max. turning diameter: 470 mm Max. swing diameter: 575 mm Turning length: 1,500 mm Spindle speed: 3,000 rpm Magazine for 40 tools (KM 63/SK 40) Dodpfx Asyg Ru Defpskh B-axis Y-axis Steady rest Tailstock Chip conveyor

Condition: used, Year of construction: 2008, Mazak QTN-100MSY Year: 2008 X/Y/Z/B: 185/100/455/460 mm Max. turning diameter: 280 mm Bar capacity up to 51 mm diameter Main spindle Speed range: 6000 rpm Main drive power: 11 kW Max. torque: 184 Nm Spindle bore diameter: 61 mm C-axis spindle positioning: 0.001° Second spindle Speed range: 6000 rpm Drive power: 11 kW Max. torque: 89 Nm Indexing: 0.001° Tool turret Number of tool stations: 12 Driven tools Speed range: 4500 rpm Drive power: 5.5 kW Max. torque: 35 Nm Travel paths X-axis: 185 mm Y-axis: 100 (+/- 50) mm Z-axis: 455 mm W-axis: 460 mm Toolsetter Dodpsxn Svdsfx Afpskh Parts catcher Chip conveyor, right side Coolant pump Barfeeder interface

Condition: ready for operation (used), Year of construction: 2011, travel distance X-axis: 900 mm, travel distance Y-axis: 430 mm, controller manufacturer: MAZATROL, controller model: Smart, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3s Mazak VCS 430A vertical machining centre was manufactured in 2011. It features a powerful 18.5 kW spindle with a speed of 12,000 rpm and a table size of 900 x 430 mm. The machine offers rapid traverse of 42 m/min and includes a high-pressure coolant system, synchronized tapping, and tool length measurement. If you are looking to get high-quality machining capabilities, consider the Mazak VCS 430A machine we have for sale. Contact us for further details. • Operating hours: 33,000 • Spindle hours: 22,000 • Rapid traverse: 42 m/min • Installed options/software: • High-pressure coolant (through-spindle), 15 bar • Synchronized tapping • Tool length measurement • Workpiece air blast • Hand-held coolant nozzle • Automatic peck drilling cycle with load detection • G00 slope constant function • High surface smoothing on contours (High Smoothing Control) • Mazatrol-to-ISO program conversion • Program memory expansion • Preparation for workpiece probe (OMP60) • Preparation for chip conveyor (left side) • MAZACC-3D high-speed software package • CNC functions and connectivity: • NC user macros • Mazak drilling/tapping cycles (Mazatrol & EIA) • EIA/ISO code input • Constant tool tip speed function • Programmable block stop (M01) • Background tool path verification (MAZACC-2D) • Up to 300 workpiece coordinate systems • Thread cutting functions • EIA canned cycles (chamfering, arc machining) • USB interface (2 ports) • LAN port Additional equipment Dkedsyhcvijpfx Afpsh • Chip conveyor, left-hand, hinge type (Mayfran) • 4th-axis simultaneous kit: Kitagawa NC rotary table (MR200) Technical Specification Taper Size ISO 40

Condition: used, Year of construction: 1996, x-travel 1500 mm y-travel 650 mm z-travel 650 mm size of pallet 1740 x 650 mm spindle taper SK 50 spindle turning speed range 25 - 6000 U/min feeds longditudinal/cross/vertical max. 8 mm/min rapid traverse longitudinal and cross 26 m/min rapid traverse vertical 20 m/min Dksdpfx Asyg N Shsfpoh spindle throat 665 mm distance spindle nose and table 200 / 850 mm drilling in full material 50 mmø threading M 45 ATC 60 Pos tool diameter 125 mm wotkpiece diameter with 2 vacant positions 260 mm workpiece length 400 mm weight of tools max. 20 kg spindle drive 18,5 kW control MAZATROL M PLUS Accessories: chip conveyor, coolant

Condition: good (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 310163917, travel distance X-axis: 150 mm, travel distance Z-axis: 250 mm, total height: 2,200 mm, total length: 3,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: MAZAK, controller model: MAZATROL 640 T, MAZAK SUPERQUICKTURN 100 M CNC Lathe - Operating voltage: 200 V - Frequency: 50/60 Hz - Rated current: 89 A - Connection: 17.8 kVA The machine is equipped with a tailstock and a 12-position tool turret, including driven tool stations. Dkjdpfx Asx Hwguofpoh Note: The item must be collected definitively between 04 and 12 March 2026 on a date yet to be agreed. FCA D-75181 Pforzheim – loaded onto truck

Condition: used, Mazak QTN100IIMY CNC lathe, year 2007, in very good condition Y-axis C-axis Dsdpfxex Hhkkj Afpokh Tailstock

Condition: ready for operation (used), Year of construction: 2018, operating hours: 13,321 h, travel distance X-axis: 560 mm, travel distance Y-axis: 640 mm, travel distance Z-axis: 640 mm, controller manufacturer: MAZATROL, controller model: SmoothG, spindle speed (max.): 18,000 rpm, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 4, This 4-axis Mazak HCN 4000 was manufactured in 2018 and features a Mazatrol SmoothG control, through-spindle cooling at 32 bar, and a Renishaw OMP 60 touch probe. With a spindle speed of up to 18,000 rpm and a tool magazine capacity of 60, it's ideal for precise and efficient machining. Consider the opportunity to buy this Mazak HCN 4000 horizontal machining centre. Contact us for more information about this machine. • Table: Pallet size 400 x 400 mm; Number of pallets 2; Indexing 1° increments • Control: Mazatrol SmoothG • Coolant/air: Through-spindle cooling 32 bar; Through-spindle air supply; Niagara flushing • Functions: Tapping without compensating chuck (rigid tapping); G00 tilt function • Compliance: CE marking Additional equipment • Renishaw OMP 60 touch probe • Renishaw Inspection+ (Version 2022) Djdpfx Asx Enlljfpekh • Tool length measurement system • Tool ID system • Chip conveyor • Additional filter cartridges Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,050 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 510 mm, controller manufacturer: MAZATROL, controller model: MATRIX 2, table width: 550 mm, table length: 1,300 mm, table load: 1,200 kg, overall weight: 7,700 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, This 3-axis Mazak VCS 530C vertical machining center was manufactured in 2015. It features a robust Mazatrol MATRIX 2 control system, a table size of 1300x550 mm, and a maximum table load of 1200 kg. The spindle operates at speeds up to 12000 rpm with ISO 40 taper, and the machine includes a 30-position tool magazine and dual pallets. Consider the opportunity to buy this Mazak VCS 530C vertical machining center. Contact us for more information. Dsdpfx Afeygtq Uepokh Additional equipment • workpiece and tool probe • mist extraction • oil separator Machine Benefits Technical Machine Benefits • Cooling through spindle pressure: 15 bar • Number of pallets: 2 • The machine is in very good technical condition. Extra Information Machine still under power Technical Specification Taper Size ISO 40

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,721 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Mazak, controller model: Preview 3, laser type: fiber laser, laser source manufacturer: IPG, laser source model: CUT, laser hours: 6,721 h, laser power: 3,000 W, laser wavelength: 1,064 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, table length: 3,050 mm, table width: 1,515 mm, working length: 3,050 mm, working width: 1,515 mm, positioning speed: 60 m/min, positioning accuracy: 0.001 mm, repeat accuracy: 0.001 mm, type of cooling: water, overall weight: 12,000 kg, warranty duration: 6 months, year of last overhaul: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, For sale: a reliable Mazak Optiplex Nexus Fiber laser cutting machine priced at €110,000. The machine has minimal mileage and has been serviced by us since day one. The laser is available immediately, free of bank charges. We provide a 6-month warranty on the machine, extendable to 12 months. Comprehensive machine relocation within Poland is available for a maximum price of 33,000 PLN Relocation is available throughout the EU. An original Mazak EMC loading and unloading system is available for €50,000. Cutting tests are available at any time. Machine details: Brand: Mazak Model: Optiplex Nexus Fiber Power: 3kW IPG Year of manufacture: 2016 Source on time: 6721h Controller on time: 7750h Automatic operation time: 3357h Mazak Control Torch 1.0 head with nozzle cooling option Controller: Mazak Preview 3 Automatic nozzle changing with 8-nozzle magazine Automatic focus Intelligent head functions 2 interchangeable tables with sheet lifter Donaldson Spark4Pro dust collector IPG source and cooler Collimator Group provides comprehensive service for Mazak laser machines. From service to sales. If you are interested in a different model, higher power, or a different budget, please contact us. Dedpfx Aoyguc Eefpjkh Collimator-group.pl

Condition: ready for operation (used), Year of construction: 2023, operating hours: 154 h, travel distance X-axis: 215 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 605 mm, total height: 1,725 mm, total width: 1,690 mm, overall weight: 4,650 kg, controller manufacturer: MAZATROL, controller model: SMOOTH Ez, number of axes: 3, This 3-axis Mazak QTE-200MY SG was manufactured in 2023. It features a maximum swing diameter of 695 mm, a standard cutting diameter of 235 mm, and a maximum turning diameter of 340 mm. The main spindle operates at speeds up to 5,000 min-1, with a motor power of 15.0 kW. It includes a 12-position turret and rapid traverse rates on the X, Y, and Z axes are 30, 10, and 30 m/min respectively. Contact us for more information about this machine. Additional equipment • Transformer for Europe (CE) • Roller guide with spherical roller bearings • SD memory card I/F + USB memory I/F • 1 Set of control keys Dksdpfx Afsx D R Svspeh • Foundation kit (steel plates) • CE Marking (With noise filter) • C-axis Positioning 0.0001° Increment • 12-Position Turret • Y-Axis Control • Interface bar feeder Extra Information Automatic part trapper High pressure cooling Preparation for chip conveyor 8" Open chuck Measuring arm Signal tower Rotary center Chain chip conveyor with side discharge Cylindrical and polar coordinate engraving function Automatic pecking cycle with load detection Quick-change cutter holder system Bar diameter Workpiece Maximum swing diameter: 695 mm Standard cutting diameter: 235 mm Maximum cutting length: 535 mm Maximum turning diameter: 340 mm Maximum bar diameter: 65 mm Maximum chuck weight: 200 kg Maximum workpiece weight: 500 kg Distance between spindle nose and end of workpiece: 81 to 686 mm Turret Number of tool positions: 12 Tool size (External turning): 25 mm Tool size (Internal turning): 40 mm Tool size (Driven drill): 20 mm Tool size (Driven end mill): 20 mm Tool size (Driven tap): M20 Indexing time 1 step: 0.23 s Indexing time full revolution: 0.63 s Tail Stock Center bore (morse taper): MK No. 5 Tailstock travel (body movement): 565 mm Maximum thrust: 5000 N Tools Milling spindle power (continuous power): 3.7 kW Milling spindle power (40% ED): 5.5 kW Maximum milling spindle speed: 4500 min-1 Minimum milling spindle speed: 20 min-1 Media Tank capacity: 225 L Coolant pump: MTA70H-250 Power: 0.25 kW Compressed air flow rate: 75 to 370 L/min (ANR) Dimensions Machine Depth 2785 mm

Condition: used, Technical details: operating hours: 2151 h milling spindle operating time: 2 h turning spindle switch on : 709 h swing diameter: 1000 mm turning diameter: 900 mm workpiece height max.: 800 mm control: Mazatrol Smoothg x-axis: 470 mm z-axis: 876 mm c-axis: 20 m/min tool holder / places: 12 revolution per minute: Revolver 4000 U/min workpiece weight: 3000 kg rapid power traverse in X-and Z direction: 24 m/min Djdpfx Ajydvfcefpskh weight of the machine ca.: 14 t dimension machine xH: 3989 x 2375 x 3400 mm

Condition: ready for operation (used), Year of construction: 2006, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: MAZATROL, controller model: 640M Nexus, number of axes: 4, This 4-axis Mazak NEXUS HCN 6000 was manufactured in 2006. It features a Mazatrol 640M Nexus control, 800 mm travel in X, Y, and Z axes, and a B-axis rotation of 360°. The spindle speed reaches up to 10,000 rpm, and it includes a 120-position tool magazine. The table can handle loads up to 1,000 Kg. Consider the opportunity to buy this Mazak NEXUS HCN 6000 turn-mill centre. Contact us for more information. • B-axis rotation: 360° • Table size: 500 x 500 mm • Permissible load: 1,000 kg • Tool magazine: 120 positions • High pressure coolant: 70 bar Additional equipment • Chip evacuator (chip conveyor) Dedpfeygl Ncjx Afpjkh Technical Specification Taper Size ISO 50