Used Measuring Beam for sale (10,812)

Condition: excellent (used), Zeiss Coordinate Measuring Machine Cjdpfxezii Dhj Aptjhb Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2009, machine/vehicle number: 001648U, load capacity: 10,000 kg, For sale Used Abus single-girder overhead crane, 17,105 mm span x 10,000 kg capacity. Ref. 001648U * Stored indoors * Technically 100% sound and inspected All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment in length and/or height and, if required, repainting * Power rail / conductor bar * Radio remote control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swivel cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. Chjdpfezik H Dsx Aptsb For more information, please visit the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, crane, hall crane, bridge crane, workshop crane, storage crane, lifting equipment, cranes, universal crane, hoist. Overhead crane. Single-girder. Chain hoist.

Condition: used, functionality: fully functional, machine/vehicle number: 001655U, load capacity: 6,300 kg, For sale Used Demag single-girder overhead crane, 20,440 mm span x 6,300 kg capacity. Ref. 001655U * Stored in a dry environment * Technically 100% operational and inspected All our new and used cranes, which we supply with installation, come with a warranty! We can optionally supply our cranes including: * Adjustment of length and/or height and possible repainting * Power rail / conductor bar * Radio control * Tandem control * Installation and inspection You can also contact Jan Reiling B.V. for: * New lifting equipment * Parts for your lifting equipment * Swing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment In addition, we have our own stock of approximately 15,000 Demag parts. Cjdpszilafefx Aptehb For more information, see the Jan Reiling B.V. website. Cranes, crane, gantry crane, workshop crane, warehouse crane, hoist, cranes, hall crane, bridge crane, workshop crane, storage crane, lifting equipment. Overhead crane. Single-girder. Chain hoist.

Condition: used, Shimadzu Type: AG-X plus 20kN-50kN +750mm Dimensions: W 1206 x D 765 x H 2920 mm Technical specifications: Fmax: 50 kN Speed: 0.00005~1500 mm/min Accuracy: ±0.1 % JIS B7742 Class 0.5, ASTM E2658 Class A Crosshead-table distance (mm)(tensile stroke)*3: 215 to 1940 (20 kN: 0 to 1535 mm, 50 kN: 0 to 1475 mm) Codpfx Aszimkfoptshb Possible test width: 600 mm Frame stiffness: 180 kN/mm 710 kg 200 V 4.5kVA/15 A + Accessories as shown Condition: used Scope of delivery: (see picture) (Specifications and data subject to change and errors!) If you have further questions, we will be happy to answer them by phone.

Condition: good (used), Probe, 3D probe, probe insert, probe head, Digimatic Indicator, scanning head, measuring head, inductive displacement sensor -Manufacturer: Mahr Feinprüf, Measuring Probes, Position Sensors, Displacement Sensors Chedpfxozi D Tws Aptjb -Type: 1302 -Quantity: 1x measuring probe available -Box dimensions: 155/100/H35 mm -Weight: 0.3 kg

Condition: ready for operation (used), Year of construction: 2000, length 1500 mm width 1000 mm Csdpfxjzpf T Ss Aptshb

Condition: good (used), Year of construction: 2021, functionality: fully functional, We recommend a personal inspection to discuss the machine's details in greater depth. Cjdpfezphtuex Aptohb

Condition: excellent (used), Year of construction: 2014, We are offering a high-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Completely ready for connection, including all cables Note: The PC is password-protected, but the software is included on CD Csdpfx Apozpwg Retjhb Various sensor heads: Measurement volumes: Set 175x140 Set 350x280 Set 550x... Set 1000x800 Complete GOM PC system in an aluminum case (running Linux), fully configured for the GOM ATOS IIe Software on CD; steel scale bars with ATOS evaluation dongle Replacement lamp Calibration panel (aluminum) CP20/MV 350x280 mm² Please feel free to contact us if you have any questions!

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: H513201129, type of input current: AC, input voltage: 220 V, measuring range X-axis: 750 mm, measuring range Y-axis: 50 mm, measuring range Z-axis: 250 mm, Selling a high-quality and fully functional Sony Magnescale 3-axis digital measuring system for machine tools, milling machines, special machines, or measurement tasks. The system comes from an industrial application and is in used, good condition. All components are functional, and the display works perfectly. Scope of delivery: Sony LH51-3 digital display (3 axes) Sony SR128-025 linear scale – measuring length 250 mm Sony SR128-045 linear scale – measuring length 450 mm Sony SR128-075 linear scale – measuring length 750 mm Sony TS-1 3D touch probe Extension cable Connection cable as shown in the photos Operating manual (digital as a PDF file) Technical data: 3-axis digital display Sony LH51-3 Measuring system: Sony Magnescale Cjdpfjzmxk Sox Aptehb Axis X: SR128-075 – measuring length 750 mm Axis Y: SR128-045 – measuring length 450 mm Axis Z: SR128-025 – measuring length 250 mm Resolution up to 0.001 mm (adjustable depending on the device) Absolute and incremental mode Radius/diameter display Reference and zero point functions Industrial design for machine tools Note: Only the items shown in the photos are included in the sale. Please refer to the photos. Inspection and functional testing are possible by arrangement. A functional video can be sent before shipping. Private sale, excluding any warranty, guarantee, or right of return. Keywords: Sony Magnescale, Sony LH51, LH51-3, Sony SR128, Sony TS-1, digital display, DRO, digital readout, displacement measuring system, linear scale, linear encoder, position display, milling machine, lathe, machine tool, CNC, machine retrofit, Heidenhain, Acu-Rite, Accurite, Fagor, Newall, Mitutoyo, RSF Elektronik, Renishaw, Renishaw encoder, Renishaw linear scale, Renishaw measuring probe, Sino, Easson, Anilam, machine DRO, scale for milling machine, digital display for milling machine, drilling machine.

Condition: used, Three Dimension Coordinate Measuring Machine MITUTOYO CRYSTA-Apex S574 Cjdjy Ufkkopfx Aptshb

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,500 mm, measuring range Z-axis: 700 mm, Equipment: type plate available, Zeiss CNC coordinate measuring machine Prismo 9/15/7 VAST GOLD Year of manufacture: 2000 Retrofit 2024, last DAkkS calibration 12/2021 Measuring range: X = 900 mm, Y = 1500 mm, Z = 700 mm In excellent technical and optical condition Device features, equipment: C99 control system with BP26 operating panel Automatic temperature compensation VAST GOLD sensor system Probe changer magazine MSR, 10-position VAST Probe changer plate, 8x VAST Reference probe Temperature probe Probe accessories Calibration sphere HP Z4 workstation with WIN11 and monitor Calypso Basic 2024 software Options: Curve and QS-Stat Calypso upgrade and other options possible Chedpfxozq U Rce Aptsb Further accessories and options available Available for immediate delivery

Condition: good (used), Keyence Type: VR-6200 + VR-6000 Technical data: Measurable XY range: 300 mm × 150 mm *2 Object table XY travel range: 278 mm × 134 mm Z travel range: 69 mm Load capacity: 4.5 kg Working distance: 75 mm Image acquisition device: 4-megapixel CMOS, B/W Macro mode: Magnification (based on a 15-inch monitor): 12× Horizontal: 24.0 mm Vertical: 18.0 mm Magnification (based on a 15-inch monitor): 25× Horizontal: 12.0 mm Vertical: 9.0 mm Magnification (based on a 15-inch monitor): 38× Horizontal: 8.0 mm Vertical: 6.0 mm Magnification (based on a 15-inch monitor): 50× Horizontal: 6.0 mm Vertical: 4.5 mm Micro mode: Magnification (based on a 15-inch monitor): 40× Horizontal: 7.6 mm Vertical: 5.7 mm Magnification (based on a 15-inch monitor): 80× Horizontal: 3.8 mm Vertical: 2.9 mm Magnification (based on a 15-inch monitor): 120× Horizontal: 2.5 mm Vertical: 1.9 mm Chedpfx Apozgr D Ejtjb Magnification (based on a 15-inch monitor): 160× Horizontal: 1.9 mm Vertical: 1.4 mm Zoom: 1× to 4× Display resolution: 0.1 μm Height measuring range Without image composition in Z Macro mode: 10 mm Micro mode: 1 mm With image composition in Z Macro mode: 50 mm Micro mode: 30 mm Repeatability (σ) Without image composition in Z 0.4 μm *1 With image composition in Z 1.0 μm *1 Measuring accuracy Without image composition in Z ±2.5 μm *1 With image composition in Z ±4.0 μm *1 Only 50 operating hours! Includes software CD, but no PC! Condition: (Like new!) For further technical information, please refer to the manufacturer. Scope of delivery: (As shown in the picture!) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, functionality: fully functional, INATEC slot die coating system, type 100050 500 Heated multi-nozzle coating head for continuous, web-width application of hot melt adhesive onto web-shaped materials. The bar features a number of pneumatically controlled individual coating heads, which Chedpjzt Ip Refx Aptob can be switched on individually or together. Electrical heating power 11 kW, operating voltage 230 V, protection rating IP 44. Adhesive supply via external pump/drum melter. Manufacturer: INATEC GmbH, Leverkusen. Identification No. 950672. Year of manufacture probably around 1995.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Chedpeztzm Nsfx Aptsb Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: ready for operation (used), Year of construction: 2010, A manual 3D coordinate measuring machine from Mitutoyo is offered. Measuring range X/Y/Z: 500mm/700mm/400mm, measuring table: granite, clamping area X/Y: 764mm/1175mm, max. workpiece height: 590mm, max. workpiece weight: 180kg, length measuring system: high-precision glass scales, resolution: 0.0005mm, length measuring system resolution: 0.0001mm, single stylus form deviation PForm,MPE: 6µm, measured single stylus form deviation: 5.15µm, repeatability range R0: 9.70µm, guide system: air bearings on all axes, axis clamping: pneumatic, probe system: Renishaw MH20i. Machine dimensions X/Y/Z: approx. 1122mm/1434mm/2267mm, weight: approx. 646kg. The machine was calibrated by Mitutoyo on 10.03.2026. Documentation is available. An on-site inspection is possible. Chodpsztdt Sofx Aptjb

Condition: ready for operation (used), Design: gantry design, measuring range X/Y/Z: 850mm/1200mm/600mm, measuring accuracy: 2.5µm/L250, repeatability: +/-3µm, machine weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Chodpfx Ajy Hk Ufepteb

Condition: ready for operation (used), Year of construction: 2000, Max. punching force: 300kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 11kVA, length: 4800mm, width: 3400mm, height: 2800mm, net/operating weight: 10/13t, operating hours: 2818h, with documentation. The control was renewed in 2022. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Chedpfx Asw Sxyljpteb

Condition: ready for operation (used), Year of construction: 2003, Max. punching force: 500kN, max. punching stroke: 200mm, max. punching area: 1800x750mm, connected load: 39kVA, length: 6500mm, width: 3900mm, height: 2900mm, net/operating weight: 7.8/10.2t, operating hours: 56,645h, with documentation. The machine has been regularly maintained, hydraulic unit integrated into the machine frame, with PC control. An on-site inspection is possible. Chjdpfx Asw Sxyreptjb

Condition: ready for operation (used), Year of construction: 2001, Travel X/Y/Z: 500mm/600mm/400mm, max. length measurement error: 2.9 + L/350, max. single-point error: 2.9, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Cjdpfx Ajw H Auqjptohb

Condition: ready for operation (used), Year of construction: 2006, Travel X/Y/Z: 800mm/1000mm/700mm, max. length measurement error: 2.5 + L/350, max. single-point error: 2.5, control: Pantec Eagle Pro/3. Includes test head PH10M Plus, PHC-2, sensor TP200, 20-piece probe set, calibration sphere, industrial PC, measuring software Inca 3D Premium with STEP and factory calibration. The machine can be equipped with additional options. Documentation available. An on-site inspection is possible. Chodpfx Apsw H Au Djtjb

Condition: ready for operation (used), An optical image measuring system Keyence is available. Measuring dimensions X/Y: 100mm/200mm, measuring accuracy at L/100: +/-2µm, camera: CMOS. Includes measuring stage/support table, calibration template, computer and accessories. Documentation available. An on-site inspection is possible. Cedpfx Apsxu I A Hjtjhb

Year of construction: 2006, condition: ready for operation (used), Max. workpiece height: 200mm, max. load: 150kg, length: 1300mm, width: 1274mm, height: 1940mm, weight: 1.1t. Chjdpfx Apeg E Uh Ujtsb

Condition: ready for operation (used), Year of construction: 2018, Type: 3D coordinate measuring machine (CMM), measuring range X/Y/Z: 300mm/250mm/150mm. Documentation available. On-site inspection is possible. Chedeupk A Ejpfx Apteb

Condition: ready for operation (used), Year of construction: 2020, An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible. Chodpfxeyxq U Ao Aptsb

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, Super price reduction: 9,999! Codszcqy Eepfx Aptehb Taylor Hobson Talyrond 265 roundness measuring device. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g., of cams on a camshaft, or journals of a crankshaft. It is certainly also of interest to motorsport and tuning companies. The first photo is a "stock photo" from a Taylor Hobson catalog, showing how it is constructed, except for the computer. It comes with a newer HP computer with a small form factor... Max. diameter: 350 mm Max. test part height: 500 mm (higher measurements are possible by measuring in two parts, up to a maximum of 1000 mm...) Self-centering of the workpiece: +/- 5 mm Max. weight of test part: 40 kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It was never in a dirty machine hall. The year of manufacture is estimated to be between 2002 and 2005. The Taylor-Hobson measurement software is, of course, included and runs on the supplied HP computer (without a password...). Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is also included! The very detailed operating manual is on the USB stick, and all circuit diagrams and functional diagrams are also included! The system will be shipped on two Euro pallets using a shipping company. It is already well secured on the pallets. The Talyrond 265 and the desk will be well protected with bubble wrap, etc., and secured with stretch film for transport. The system itself is fixed with "transport safety screws"... Shipping is at the buyer's expense and will be done on two Euro pallets... The measuring system should definitely be set up and commissioned by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is recommended after a few years... Errors can be made during setup and commissioning. For example, some locking screws are installed for transport; if you forget them, the system may be damaged when it starts up... A truly well-maintained, very accurate system that will provide many more years of excellent service!