Used Measuring Machine for sale (67,582)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, type plate available, SUPER PRICE!!! NOW ONLY 5,999 EUR!!! Taylor Hobson Talyrond 265 roundness measuring system. Extremely accurate; it can measure the roundness of lenses, optics, pistons, turbine components, tubes, shafts, but also eccentricity, e.g., of cams on a camshaft, or journals of a crankshaft. It is also of interest to motorsports and tuning companies. The first photo is a "stock image" from a Taylor Hobson catalog, showing the setup, except for the computer, which is a newer, more modern HP model with a small form factor... Laedpfx Aszcqy Eolyjh Max. diameter 350mm Max. workpiece height 500mm (higher values up to max. 1000mm can be measured in two parts, half and half...) Self-centering of the workpiece +/- 5mm Max. weight of workpiece 40 Kg The system has been used very little and has had only two owners. The first owner, from whom I bought it, was an implant company in Hamburg. It was used there in a "medically clean environment" and is extremely clean. It has never been in a dirty machine hall. The year of manufacture is estimated to be between 2003 and 2005. The Taylor-Hobson measuring software is, of course, included and runs on the supplied HP computer (without a password...). It is also on the USB stick, perhaps to install it on another machine you have. Accessories are included: the original Taylor-Hobson desk, computer, monitor, seven (7!) measuring probes, each of which is very expensive to purchase. A sample/sample lens (hemisphere) for calibration is included! The very detailed operating manual is on the USB stick, and it also contains all the circuit diagrams and functional diagrams! The system will be shipped on two Euro pallets via a shipping company. It is already well secured on them. The Talyrond 265 and the desk will be well wrapped with bubble wrap, etc., and tightly secured with stretch film for transport on the pallets; the system itself is fixed with "transport safety screws." Shipping is at the buyer's expense and will be on two Euro pallets. The measuring system should definitely be set up and put into operation by a Taylor Hobson service technician, who can then also recalibrate the system on-site. This is recommended after a few years. Errors can be made during setup and commissioning. For example, some locking screws are installed for transport, and if you forget to remove them, the system may be damaged when it starts up. A truly well-maintained, very accurate system that will provide many more years of excellent service!!

Condition: like new (used), Year of construction: 2022, operating hours: 30 h, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 200 mm, total height: 850 mm, type of input current: AC, total width: 720 mm, total length: 950 mm, overall weight: 54 kg, input voltage: 230 V, table width: 500 mm, table length: 500 mm, ambient temperature (max.): 30 °C, ambient temperature (min.): 15 °C, Equipment: documentation/manual, type plate available, KEYENCE VL-570 Optical 3D Coordinate Measuring Machine The VL-570, from Keyence’s VL-500 series, is a 3D measuring machine that measures various shapes from the stripe projection image of the object, which is captured with a black-and-white CMOS camera. The linear light from the light source (stripe projection light) is projected onto the object at an angle using the projection lens. Measurement types that can be performed with the VL-570: 3D measurement, plane measurement, profile measurement, 3D comparison measurement, profile comparison measurement. The basic unit consists of: - VL-500 control unit - VL-550 500mm base - VL-570 measuring head - VL-H2P comparison measurement module - VL-C2 cover - OP-88145 calibration plate Technical data: Repeatability: 2µm Measuring accuracy: 10µm Standard measuring mode (4M mode): 4 million measuring points Laedpfx Alsz Ihkbsyjh Fine measuring mode (16M mode): 16 million measuring points Rotation mechanism: 360° Tilt mechanism: 45° Measuring range: Ø500mm x H 200mm User manual and quick start guides are included. New price: €52,350 (net) Upon request, the 3D coordinate measuring machine can be delivered within a 200 km radius of our company headquarters. Delivery costs will be agreed upon separately.

Condition: good (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 88229, total width: 1,450 mm, total length: 2,100 mm, overall weight: 3,800 kg, table width: 1,000 mm, table height: 850 mm, table length: 2,100 mm, Equipment: type plate available, Coordinate measuring machine: Zeiss MC 850, 08/12/06, UHING Year of manufacture: 08/1990 Serial number: 88229 Control system: C99 Dongle available: Yes Software: Calypso 7.6.4 Measuring head: VAST XT – Good condition – PC included – New software + license – Everything packed for transport with original Zeiss transport securing devices (value of transport securing devices approx. €5500) X-axis as a longitudinally movable portal, 850 mm Y-axis cross slide in the portal, 1,200 mm Z-axis as a measuring head quill (vertical), approx. 600 mm Through-passage between the portal, approx. 1,000/1080 mm Through-passage in height, approx. 750 mm Lajdpfx Aljz T T T Tjyjh Overall table size, approx. 1,000 x 2,100 mm Table height above the floor, approx. 850 mm Machine height, approx. 3,050 mm Weight, approx. 3,800 kg The machine was in use until recently. Free loading.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 08120055, measuring range X-axis: 440 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 410 mm, workpiece weight (max.): 227 kg, total height: 2,320 mm, type of input current: AC, total width: 1,160 mm, total length: 1,030 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, overall weight: 293 kg, input voltage: 220 V, table height: 930 mm, travel speed (max.): 21,000 mm/min, repeat accuracy: 0.003 mm, table load: 227 kg, compressed air connection: 4 bar, year of last overhaul: 2025, Equipment: documentation/manual, type plate available, Laodey Taixopfx Alysh

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine from Zett Mess Platen and 2 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Platen dimensions: 6,000 x 3,100 mm Ljdpfx Ae Aa Ikfolyjah Measuring range: X/Y/Z 6 / 3,100 / 2,500 mm Service available from the successor company, Zett Mess Includes all accessories Price: EUR 9,500.00 plus VAT, ex works

Condition: ready for operation (used), Year of construction: 2004, Manufacturer: CE Johansson / Hexagon Metrology Model: Saphir 12.5-30-10 Machine Type: 9489-145 Serial Number: 8489-70305 Measuring Capacity X-axis: 1,250 mm Y-axis: 3,000 mm Z-axis: 1,000 mm Machine Dimensions Overall Width (B): 2,400 mm Internal Width (B₁): 1,450 mm Overall Length (D): 4,860 mm Overall Height (H): 3,790 mm Table Height (H₁): 700 mm Clearance Height (Hₚ): 1,150 mm Weight & Load Capacity Machine Weight: 8,200 kg Maximum Permissible Workpiece Weight: 6,000 kg Clamping Area: 1,450 × 3,400 mm Measuring Performance Resolution: 0.1 µm Accuracy (VDI/VDE 2617 Part 2.1): U₃ = 4 + 5L µm (L in meters) Speed & Acceleration Maximum CNC Speed: 500 mm/s Ljdpfx Alezrvg Ueyjah Acceleration: 1,000 mm/s² Electrical Requirements Power Supply: 230 V ±10%, Single Phase, 50 Hz Power Consumption: 1,500 VA (10 A) Air Supply Operating Pressure: 6–10 kp/cm² (0.6–1.0 MPa) Air Consumption: 48 L/min at 5.5 kp/cm² (240 NL/min) Operating Environment Required Temperature Stability: ±1.0 °C Maximum Temperature Gradient: 0.5 °C Software PC-DMIS Version: CAD++ 2018 R2 (Release) Build: 535 (Pre-Release) Major Release Date: October 30, 2019

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 151255, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Lasdpsz Ebzbsfx Alyeh Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 800 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 700 mm, workpiece weight (max.): 800 kg, warranty duration: 12 months, total height: 2,963 mm, type of input current: AC, total width: 1,700 mm, total length: 2,080 mm, overall weight: 2,275 kg, year of last overhaul: 2026, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Wenzel | L87 with PH10 and SP25 scanning system Lsdez Hw Elepfx Alyjah Refurbished coordinate measuring machine with the latest Renishaw technology. Modernized in 2026. Measuring range XYZ 1200 x 1000 x 600 mm Measuring uncertainty MPE (E0) 2.5 + L/300 in µm Equipment: - Renishaw UCC S3 control, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - Renishaw PH10 rotary/swivel head with SP25-2 scanning system, including probe changer FCR25-L6 (6 ports) - MODUS measuring software, current version, with CAD import (STEP), including 1 year of software maintenance - PC system with Windows and 2 x 27" TFT monitors, NEW, including a height-adjustable desk - Control cabinet with up-to-date safety technology We will gladly adapt the equipment to your requirements. Please note: The images show the machine with an alternative probe system! Optional service package of your choice: €16,460.00 Free delivery to loading dock | Commissioning | Testing | Accuracy acceptance according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | Further options and equipment are available upon request.

Condition: good (used), Year of construction: 2005, functionality: fully functional, year of last overhaul: 2021, Equipment: documentation/manual, type plate available, Highly precise, mobile coordinate measuring machine (CMM) of the FARO Titanium type, with an arm length of 2.4 meters and 6 axes. The system is in good condition and ready for immediate use. Ledpszx Uwxofx Alyeah As it is the 6-axis version, the arm is particularly rigid and delivers extremely precise, repeatable measurement results during the tactile probing of components. Perfectly suited for industrial quality assurance, first article inspection, or the comparison of nominal and actual values directly in the workshop. Technical data & highlights: Measuring range: 2.4 meters (perfect for medium to large components and fixtures) Kinematics: 6 axes (maximum rigidity for tactile measurements) Precision: Very high single-point repeatability (typically approx. ±0.025 mm) Environmental protection: 6 internal temperature sensors automatically compensate for fluctuations in the workshop. Software included: Delcam PowerInspect 2015 (with dongle) The package includes the professional measuring software Delcam PowerInspect. Activation is straightforward via the included hardware USB dongle (no subscription, unlimited usage). Fast comparison of nominal and actual values against CAD data. Creation of professional measurement reports for customers. Simple evaluation of form and position tolerances. Scope of delivery: FARO Titanium 2.4m measuring arm (6 axes) Original, robust FARO transport case (heavy-duty) Delcam PowerInspect software incl. USB license dongle Measuring probe / sensors incl. calibration sphere Power supply, cable set Condition & details: Year of manufacture: 2005 Last calibration: 06/2021, certificates available Normal signs of wear and tear Shipping can be arranged for an additional fee. The measuring arm can be inspected and tested by appointment.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 94681, travel distance X-axis: 700 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, ZEISS PRISMO 5 3D coordinate measuring machine with VAST probing system For sale is a used ZEISS PRISMO 5 3D coordinate measuring machine, serial number 94681. The machine is equipped with a ZEISS-VAST probing system and a comprehensive multi-probe changer. A machine-side ZEISS control console is also included. Additionally available is a cabinet with probes, which is not included in the stated machine price and can be offered separately if desired. Details regarding the content and scope of the probe inventory can be provided upon request. Machine data Manufacturer: ZEISS Model: PRISMO 5 Serial number: 94681 Probing system: ZEISS VAST Equipment: Multi-probe changer Condition: used ZEISS service and inspection marking The machine has a marking from the technical service department of Carl Zeiss IQS Deutschland GmbH, referring to an inspection according to DIN EN ISO 10360. Documented specifications: MPE(E0): 2.70 + L/250 P: 2.00 RONt: 4.40 Type: PRISMO 5 Serial number: 94681 Calibration date: 02/2025 The values stated are reproduced according to the ZEISS marking on the machine. ZEISS CALYPSO 5.8 is visible on the existing control PC. The exact scope of the license or the transferability of an existing software license is not part of this information and can be checked separately if desired. Optionally available In addition, there is the possibility of purchasing a separate cabinet with a comprehensive inventory of ZEISS probes and accessories. This cabinet is not included in the machine price and can be offered separately if desired. Condition and inspection Laodozwvk Ropfx Alysh The machine is in used condition. An inspection is possible after prior arrangement. The exact scope of delivery can be agreed upon or checked based on the available components if there is concrete interest. Errors, changes and prior sale are subject to change. HOLZHÄUER Hydraulik & Maschinenbau GmbH

Condition: used, Year of construction: 2010, functionality: limited functionality, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, total height: 1,680 mm, type of input current: AC, total width: 740 mm, input voltage: 230 V, table length: 750 mm, Equipment: type plate available, Machines works fluently apart from sprocket- which blokes and reqiures fixing. Laedpfxoz Ditvj Alyoh

Condition: excellent (used), Year of construction: 2016, Travel paths X / Y / Z 300 / 200 / 200 mm Max. table load: 16 kg Siegfried Volz Werkzeugmaschinen Lsdpst E Hd Refx Alysah Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany

Condition: used, Year of construction: 2004, Mitutoyo CRYSTA-Apex C7106 – used CNC coordinate measuring machine with a gantry design, professionally inspected and fully functional. The proven C-series from Mitutoyo stands for measurement stability on a granite base – ideal for precise 3D measuring tasks in the metrology lab. Technical data: - Measuring range: 700 x 1000 x 600 mm - Control system: UC-200H - Software: MCOSMOS-1 V4 - Probe system: Renishaw PH10M Equipment & accessories: Laodsz Tffnjpfx Alysh - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Mitutoyo calibration certificate 08/2026 (WK-2060334-26) Included in the scope of supply: - Coordinate measuring machine CRYSTA-Apex C7106 - Renishaw PH10M rotary/tilting head - Renishaw TP200 probe system - Renishaw HCU1 hand control unit - Computer system with MCOSMOS-1 V4 - Mitutoyo calibration certificate 08/2026 Not included in the scope of supply: - Automatic probe changer / probe changing rack Condition: used, inspected – fully functional. Year of manufacture: 2004. Procedure: Inspection by appointment. Disassembly and loading will be carried out by us, transport on request. Location: Leonberg, Germany. Kneissl Messtechnik GmbH – your specialist for coordinate measuring technology with an accredited DAkkS calibration service. Installation, training, and instruction are optional.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 156521, measuring range X-axis: 750 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 250 kg, total height: 3,020 mm, type of input current: AC, total width: 2,092 mm, total length: 2,140 mm, overall weight: 4,500 kg, table width: 900 mm, table height: 860 mm, table length: 1,300 mm, travel speed (max.): 520 mm/min, table load: 250 kg, ambient temperature (max.): 40 °C, ambient temperature (min.): 15 °C, maximum load weight: 250 kg, Equipment: type plate available, For sale is a used ZEISS GageMax 7/5/5 Navigator 3D coordinate measuring machine with serial number 156521 and manufactured in 2011. The machine has a measuring range of 750 × 500 × 500 mm and is designed for workpieces up to 250 kg. It is equipped with a ZEISS VAST XT probe system. The measuring volume also includes a multi-probe changer with various probe holders. According to the original auction description, the offered lot includes accessories and computer equipment. The available images show, among other things, a computer, monitor, keyboard, mouse, and other components belonging to the machine. The scope of delivery is based on the images or the components available during inspection. Technical data: Manufacturer: ZEISS Model: GageMax 7/5/5 Navigator Serial number: 156521 Year of manufacture: 2011 Measuring range X/Y/Z: 750 × 500 × 500 mm Maximum workpiece weight: 250 kg Probe system: ZEISS VAST XT Multi-probe changer included Computer equipment included Last documented calibration: 02/2025 The machine is in used condition. A current functional test was carried out by ZEISS. Lodpfszwwkxjx Alyjah An on-site inspection is possible by arrangement and is expressly welcome. The machine is preferably sold for collection. Loading and transport can be arranged by agreement. Scope of delivery as shown in the images. Subject to prior sale.

Year of construction: 2021, condition: as good as new (ex-display), functionality: fully functional, New Single-head cutting machine OMC GIOBI 600 (year 2021) with measuring roller conveyor FOM INDUSTRIE ASSOMAK VS 6m (year 2025) and inlet conveyor PORTER 4,2m (year 2025) Condition: new, demo machines - Saw blade D 600 mm - Hdro-pneumatic feed - Inclination is pneumatic on both sides, with fixed graduations of 22.5° - 45° - 90°. For intermediate gradations, with manual mechanical stop - 2 vertical and 2 horisontal clamps - Spray mist blade lubrication system - Integral pneumatic protection - ASSOMAK VS 6m: measuring roller conveyor with digital display and manual length stop positioning - Minimum cut 0 mm Laodpfey Erwfsx Alyjh - Maximum cut 6000 mm - Measurement reading by encoder - Positioning precision ± 0,5 mm - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm - PORTER 4,2m: inlet roller conveyor - Loading capacity per linear meter: 10 Kg - Width of bar resting surface: 200 mm

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Lodeztzm Nopfx Alysah Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: like new (used), 3D Machines – Brown & Sharpe Standard Laedpfxjzndw Te Alyoh

Condition: like new (used), functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, warranty duration: 12 months, total height: 3,600 mm, type of input current: AC, input voltage: 230 V, year of last overhaul: 2021, Equipment: type plate available, Important – Machine sales and service are only available within Germany! We are selling our test and demonstration machine from our Solution Center. Other machines are also available. Please feel free to contact us. Leitz | PMM 12106 with PH10 and SP25 scanning system Refurbished coordinate measuring machine with the latest Renishaw technology Modernized in 2021 Measuring range XYZ 1200 x 1000 x 600 mm Measuring uncertainty MPE (E0) 1.2 + L/400 in µm Equipment - Renishaw UCC S3 controller, SPA3 servo amplifier, MCU joystick - Active temperature compensation with workpiece sensor - TONiC™ linear encoder system in all axes - Renishaw PH10 rotary indexing head with SP25-2 scanning system, incl. probe changer FCR25-L6 (6 ports) - MODUS measuring software, current version, with CAD import (STEP), incl. 1 year of software maintenance - PC system Windows 10 with 2 x 27 TFT monitors, NEW, incl. height-adjustable desk Laodovxh Diopfx Alysh - Control cabinet with current safety technology - Base plate M6 We will gladly adapt the equipment to your requirements. Optional service package of your choice: Transport, free to loading bay | Commissioning | Testing | Accuracy acceptance test according to DIN ISO 10360 | Software training in Pliezhausen or Eitorf | further options and equipment are available upon request.

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 50 kg, warranty duration: 12 months, total height: 1,950 mm, type of input current: AC, total width: 1,900 mm, total length: 2,020 mm, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 350 mm, overall weight: 5,800 kg, input voltage: 230 V, compressed air connection: 6 bar, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Reference Measuring Device Mahr OMS 1000 Multisensor The all-round measuring device for the broadest range of components or pallet measurements Factory-refurbished premium multisensor measuring center with warranty, rebuilt in 2025. INCLUDES latest software update, 18 months of free software update service, free lifetime software hotline and user support. Delivery with factory service or freight forwarding, worldwide. Online or on-site demonstrations with customer parts available, application-specific consultation by accredited Profitech metrology laboratories during project planning. Full service possible: – Delivery, installation, commissioning, accuracy acceptance according to standards, certification, and comprehensive acceptance documentation. Customized training and education programs also available as online courses. Rental, hire-purchase, or financing possible directly through Profitech and without a financial institution. Measuring device can be configured individually to customer requirements. Measurement accuracy: E1 = 1.3 + L / 400µm Lodexbpgtepfx Alyoah E2 = 0.9 + L / 600µm E3 = 2.2 + L / 300µm Measuring range: approx. 1000 x 1000 x 350 mm Includes optical sensor (camera & laser) Renishaw TP200 probe system incl. Standard Force Module CNC control incl. hand control panel 27-inch flatscreen monitor Evaluation station incl. Windows 10 operating system (Windows 11 available on request) New Opticheck 3D 5.0 software Active vibration damping (pneumatic) suitable for production-related measurements Optical sensor: • Pure grayscale image processing • Fast, digital image processor • Automatic feature and edge filter • Error documentation via program-controlled video image storage • Multifunctional multi-window technology • White telecentric transmitted light • Coaxial reflected light • 3D multi-sensor head Laser Sensor: Laser preparation for laser autofocus. Software-controlled intensity regulation for adaptation to different materials. Software: • Full version WITHOUT subscription model or maintenance contract • User-friendly, interactive programming • Symbolic representation of the program structure • Multitasking enables parallel measuring and evaluation • Powerful basic editor for customer-specific programs • Automatic sensor calibration • Geometry elements: point, line, circle (envelope, best-fit and circumscribed circle), ellipse, plane, cylinder, cone, sphere • Geometry functions: intersection, distance, angle, perpendicular, symmetry • Form & position tolerances: straightness, roundness, flatness, cylindricity, parallelism, perpendicularity, inclination, position, symmetry, concentricity, run-out, total run-out, flatness run-out, total flatness run-out • Maximum material condition (MMC) • Up-to-date tolerance tables according to common DIN standards • Software module for creating any factory-specific tolerance tables

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, workpiece weight (max.): 500 kg, total height: 2,750 mm, total width: 1,200 mm, total length: 1,400 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, overall weight: 1,800 kg, input voltage: 230 V, table width: 700 mm, table height: 600 mm, table length: 1,000 mm, year of last overhaul: 2026, maximum load weight: 500 kg, Equipment: documentation/manual, Nikon LKV 10.7.6 – complete 3D measuring system with scanner and probe For sale: Nikon LKV 10.7.6 in very good condition, complete with a Nikon LC15Dx 3D laser scanner and a Renishaw TP200 probe system. The combination of scanning and probing makes this measuring machine very versatile. The LC15Dx scanner is ideal for quickly and digitally capturing complex shapes and surfaces. This allows large amounts of measurement points to be collected in a short time, enabling efficient mapping of shape, contours, and deviations. The TP200 probe is suitable for highly accurate contact measurements, for example, of holes, surfaces, edges, and other geometric features. This allows both freeform shapes and critical dimensions to be accurately checked. With PolyWorks software, this machine is very easy and quick to program, so that measurements from both the probe and the scanner can be performed together in one program and included in the same report. The machine is offered complete, including: New PolyWorks|Inspector license High-end workstation computer Complete installation and configuration with calibration according to ISO-10360 Training and explanation Delivered ready for use A complete solution for 3D inspection, dimensional control, and quality control, allowing you to both scan quickly and probe with high precision. The machine is in very good condition and can be viewed and demonstrated by appointment. You are welcome to come and see the machine and discuss its capabilities. Lsdpozvyrcofx Alysah Please feel free to contact us for more information or to schedule an appointment.

Condition: ready for operation (used), Year of construction: 1990, Immediately available from prototype construction: Coordinate measuring machine, Zett Mess Plates and 4 measuring beams, manufactured in 1990 Electronics and measuring system newly installed in 2020 Plate dimensions: 12,000 x 3,100 mm Measuring range X/Y/Z: 12,000 / 3,100 / 2,500 mm Service from the successor company, Zett Mess, is available All accessories included Lsdpfx Ae Aa Ii Uslysah Price: EUR 23,000.00 plus VAT, ex works

Condition: good (used), measuring range X-axis: 505 mm, measuring range Y-axis: 405 mm, measuring range Z-axis: 4,058 mm, workpiece weight (max.): 100 kg, total height: 2,185 mm, total width: 1,082 mm, total length: 1,054 mm, travel distance X-axis: 505 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 405 mm, overall weight: 515 kg, input voltage: 230 V, travel speed (max.): 25,800 mm/min, table load: 100 kg, compressed air connection: 5 bar, ambient temperature (max.): 26 °C, ambient temperature (min.): 16 °C, Equipment: type plate available, Mitutoyo Euro-C Apex544 CNC 3D CMM. P.S. For Dutch buyers looking for a CMM: Keep in mind that a measuring machine must always be professionally packaged, transported, and installed! These costs are NEVER mentioned by the sellers on this website. These costs usually range from €5,000 to even above €10,000! Please take this into account. Also, the operation (and especially the accuracy) is not guaranteed. An excellent 3D CNC CMM at a very attractive price. Three-dimensional measurement with accuracy within three micrometers! A fine-looking Mitutoyo Euro-C Apex544 3D Coordinate Measuring Machine. In very good condition. Fully meets specifications. Measuring range: X-axis 505 mm Y-axis 405 mm Z-axis 405 mm Specification ISO 10360-2 MPEE = [2.9 + 4.0L/1000] µm (at a temperature of 16–26°C) Resolution 0.0001 mm. CNC speed 430 mm/sec. Maximum acceleration 0.17 g Workpiece load capacity up to 100 kg Height 219 cm Width 109 cm Ljdpfx Aezz Rc Aslyoah Length 106 cm Air-bearing axes (5 bar supply) Operates on 230V power to the controller (the CMM itself runs on low voltage). Euro-C Apex544 (PH1 + TP20). Standard joystick. Desktop PC with Windows 11 Pro (English). 24-inch monitor. Mouse & keyboard. MCOSMOS v3.0 Upgrades available to: PH10T/M + PHC10-2. TP200 + PI200-2 SCR200 + 6 STD modules. MCOSMOS version of choice (subject to stock). Dual joystick. (On-site training within the Benelux region). Sales prices exclude: transport, installation, calibration, and measurement certificate. Can be viewed in operation/demonstrated in the Netherlands by appointment. Within the Netherlands, transport and installation will be provided free of charge (calibration is not included, though it is available as an option).

Condition: used, Original ZEISS CMM Probe Holders and Stylus Extensions Original ZEISS probe holders Stylus extensions Various star styli and straight styli As shown in the pictures Condition: Used Lajdpfxjzg Eczs Alyjh Good working condition Carefully removed from a functioning ZEISS CMM Ideal for ZEISS CMM users looking for original replacement or additional probing equipment.

Year of construction: 2022, condition: used, controller manufacturer: Sonstige, controller model: Bruker alicona MetMaX, _____ Description: Year of manuf. : 2022 Control : Sonstige Bruker alicona MetMaX Movement X/Y/Z : mm In General: Measurement method:Non-contact, optical, three-dimensional Maximum number of measurement points:500 million Measurement volume:310 x 310 x 310 mm Travel speed:100 mm/s Dimensions:960 x 1,109 x 1,958 (2,288) mm Weight:approx. 1,250 kg Measuring object Surface texture:Any surface (including polished metals) Lasdpj Aau Tysfx Alyeh Max. weight:30 kg Max. dimensions (W x H):680 x 375 mm Equipment: Rotary table:A-axis, C-axis Lens changer:Automatic (4-position) Number of lenses:4 (WD 11, 17, 19, 30) Polarisation:Ringlight HP Vc1 System monitoring:9 temperature sensors ControlServerSF:64-bit, 6-core, 32 GB RAM, 500 GB SSD, Windows 10 Set-up mode:Handheld control unit

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 054390, measuring range X-axis: 1,500 mm, measuring range Y-axis: 2,500 mm, measuring range Z-axis: 1,200 mm, Manufacturer: Wenzel Model: LH 1512 Serial No.: 054390 Year of manufacture: 2005 Measuring software: Quartis Measuring volume X/Y/Z mm: 1500mm/2500mm/1200mm Control panel: HT400 Probing system: PH10M / TP200 Control system: WPC 2040 Supply: 6 bar Power requirement: 230 V Accuracy: E0, MPE 3.7 µm + (L/250mm) PForm.Sph.1x25:SS:Tact 3.7µm Machine weight: approx. 12500 kg Workpiece weight: approx. 3750 kg Space requirement CMM: L ≈ 4000mm / Width ≈ 2560mm / Height ≈ 4030mm Equipment: Active damping Accessories: Ball standard, probe changer SCR200 Condition: Used, regular maintenance performed Options: DAkkS – Calibration possible The machine can be modernized with new accessories according to customer requirements. Price: on request! Installation and commissioning possible! We will gladly prepare a detailed offer for you! Note: Our offer is exclusively for professional customers! Laedpfx Ajz Sy S Tolyjh (Subject to changes and errors in the technical data, information, and prices, as well as prior sale!)