Used Model Milling Machine for sale (73,562)

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm Hodpfx Aoxxb Rrelwou For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: Hodpex D Tbmefx Alwsu 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Milling machine head: pivoting/rotating -Feed: in X and Y no feed because no motors are installed (gears are available, see pictures) -Clamping table: 280 x 1300 mm -Travel: X/Y/Z 450/300/325 mm -Spindle mount: SK40 -quill stroke -quill feed: 0.04-0.16 mm/rev Hedjd Dt R Hspfx Alwsu -Speeds from: 60 to 3000 rpm -Dimensions: 1700/1530/H2200 mm -Weight: 1362 kg

Condition: excellent (used), For sale: MC9050B industrial round wood rod milling machine, manufactured in 2018, designed for producing round wooden poles and cylindrical wooden components such as tool handles, broom handles, furniture parts, and similar products. Specifications: • Model: MC9050B • Year of manufacture: 2018 • Power supply: 380V (Three-phase) • Working diameter: 15–50 mm • Minimum workpiece length: 600 mm • Main motor: 3 kW • Approximate weight: 350 kg Condition: • Excellent working condition. • Complete machine, ready for immediate use. • Inspection and testing are welcome. Hedpozmt U Esfx Alweu

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks Hjdpfx Aexlzg Hslwju If you have any questions, please feel free to contact us!

Condition: excellent (used), Year of construction: 2008, Universal Table Router FZ0 by Zimmermann Hsdpjw Ip Dgsfx Alwsu Modelling milling machine with variable-speed Bosch motor GGS 27 LC Ideally suited for model making and tool & die applications. Drive motor: 230 Volt, 0.6 kW Adjustable spindle speed approx. 12,000 to 27,000 rpm Machine table approx. 590 x 420 mm Unit swivels 90 degrees to both sides Longitudinal fence with fine adjustment Extraction hood and safety guard Collet chucks for 6 mm and 8 mm Includes the cutters and milling bits shown in the pictures Comes with lockable base cabinet, 2 drawers and 1 door; key included The base cabinet was modified by the previous owner with an aluminium sheet and angles to provide an integrated extraction option, see photos Waldmann surface-mounted lamp with magnifier attachment Original paint, partially touched up CE mark Very well-maintained machine from the prototype manufacturing section of a motorsport department at a Wolfsburg automotive manufacturer. Evidently, it has seen very little use so far. Machine dimensions approx. 680 x 600 x 780 mm (L x W x H) Cabinet dimensions approx. 600 x 620 x 880 mm (L x W x H) Weight approx. 190 kg The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see “more offers from this seller.”

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Hodol Dvx Ejpfx Alwsu Equipped with: Vice 19 tool holders Coolant

Condition: used, Year of construction: 2010, working width: 230 mm, spindle diameter: 40 mm, working height: 120 mm, controller model: Siemens Simatic Touch-Panel, working length: 8,483 mm, TECHNICAL DETAILS Minimum working height: 6 mm Maximum working height: 120 mm Minimum working length: 370 mm Maximum working length: 8,483 mm Hsdpfsz Ekkxex Alweu Minimum working width: 25 mm Maximum working width: 230 mm Maximum feed rate: 12 m/min Rubber feed rollers: 1 Toothed feed rollers: 4 Total number of feed rollers: 5 Number of machining units: 4 Lower milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Right milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Maximum tool diameter: 4 mm Motor power: 4 kW Left milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 4 kW Upper milling spindle Spindle diameter: 40 mm Spindle length: 240 mm Motor power: 5.5 kW MACHINE DETAILS Control system: Siemens Simatic Touch Panel Total connected power: 24 kW EQUIPMENT CE-compliant safety design The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7243

Condition: excellent (used), functionality: fully functional, Infinitely variable speed: 150 – 2000 rpm Spindle taper: ISO 30 Feed on X-axis, infinitely variable: 15 – 250 mm/min Travels: X = 280 mm, Y = 170 mm, Z = 250 mm • Universal swivel and tilting table Hedsy Uv Efspfx Alwsu

Condition: used, Year of construction: 1997, functionality: fully functional, total height: 4,000 mm, total width: 5,000 mm, total length: 5,000 mm, overall weight: 16,000 kg, ANAYAK FBZ-HV-2000 – CNC Bed Milling Machine Manufacturer: ANAYAK – Industrias Anayak S.A., Spain Model: FBZ-HV-2000 Machine Type: CNC Bed Milling Machine / Universal Bed Milling Machine Year of Manufacture: 1997 Condition: Used Technical Data • Travel X: 2,000 mm • Travel Y: 935 mm • Travel Z: 1,000 mm Hodjz Epz Aepfx Alweu • Table Dimensions: 900x • Spindle Taper: ISO 50 • Spindle Speed: 60 - 3000 rpm • Control System: CNC Control HEIDENHAIN TNC 426 • Feed Rate X/Y/Z: 1 - 3000 mm/min • Rapid Traverse: 10 m/min • Universal Milling Head: Yes • Coolant System: Yes • Chip Conveyor: Yes • Electrical Connection: 50 kW • Machine Weight: 16,000 kg Documentation available ANAYAK FBZ-HV-2000 CNC Bed Milling Machine, year of manufacture 1997. Working area X 2,000 mm. Inspection possible by appointment. Sale from current location.

Year of construction: 1997, condition: used, functionality: fully functional, machine/vehicle number: 8116, For sale is a robust and versatile vertical console milling machine (turret mill) from the renowned Taiwanese manufacturer King Rich, model KR-V3000V, manufactured in 1997. The machine is based on the proven Bridgeport concept and is characterized by its extremely flexible geometry: the milling head can be tilted, and the upper arm can be rotated and moved. This makes it the ideal all-around machine for repair shops, jig and fixture manufacturing, workshops, or demanding users. Technical data & details: Hsdpfsz Hi S Djx Alwsu • Manufacturer: King Rich Industries Co., Ltd. (Taiwan) • Model: KR-V3000V • Year of manufacture: 1997 • Control: Conventional (manual) • Spindle mount: ISO 40 (standard) • Main motor power: 3.75 kW (total connected load 5.16 kW) • Power connection: 415 V / 3 phases (high voltage) • Weight: approx. 1,600 kg (massive cast iron body) • Equipment: Automatic table feed (X-axis) installed Condition: The machine is in its original, as-is condition, directly from operation, and shows the typical wear and tear of a workshop machine. The guide rails do not show any deep rust visually. Inspection & Functionality: The machine is fully functional and can be inspected and tested on-site with power connected after prior arrangement. The scope of delivery includes the operating manual and a box with spare parts. Price: €3,600 payable in advance Note for collection: The buyer is responsible for the transport and loading. Assistance with loading can be provided.

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm Hjdpfezuxn Tjx Alwju 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 06651, travel distance X-axis: 6,800 mm, travel distance Y-axis: 3,700 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 10 m/min, total length: 15,000 mm, total width: 7,500 mm, spindle speed (max.): 4,000 rpm, total height: 7,000 mm, table height: 1,100 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 10 m/min, distance between stands: 3,300 mm, type of input current: three-phase, table load: 50,000 kg, rotational speed (max.): 4,000 rpm, distance table center to spindle nose: 2,110 mm, overall weight: 1,10,000 kg, spindle motor power: 50,000 W, control cabinet length: 7,000 mm, control cabinet height: 2,000 mm, control cabinet width: 600 mm, Equipment: rotational speed infinitely variable, MODEL: Portal Type AGE: 1992 S/N #: 06651 CATEGORY: Mills, Planer Type, CNC CAPACITY: X-Axis Travel: 6800 mm Y-Axis Head Travel: 3700 mm Hodpfx Ajyahv Selwsu Z-Axis Ram Stroke: 1500 mm, fixed crossrail Ram Cross Section: 500 mm x 500 mm Distance Between Columns: 3300 mm Distance Table To Ram Face: 2110 mm, vertical passage 2000 mm Table Size: 6000 x 2500 mm Spindle (Quill) Diameter: 250 mm Spindle Taper: ISO #50 Spindle Speeds: 0-4000 RPM Spindle Motor: 50 KW EQUIPPED WITH: FIDIA System C20 CNC Control, new in 2002 CNC biaxial continous milling head Universal Milling Head with Auto Indexing Right Angle Head with Auto Indexing Straight Milling Head Wagons for Head Change and Tool Pick-up Change Hydrostatic Bearings Coolant System Full Length Chip Conveyors both side Way Covers Rapid movements: Z-10.000 mm/min, X and Y-15.000 mm/min Table load: max 50.000 kg Weight of the machine: 110.000 kg Outside dimensions: 15.000 x 7.500 x 7050 mm Machine has been tested before dismantling and is fully operational, all mechanical components in excellent condition, electrics new in 2018. Machine available from stock. The price is now SPECIAL FROM STOCK. Once we will reassemble the machine, price will grow significantly. We can assist you to assemble and run up the machine.

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Hedpfoy Ni Ivex Alwju Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, T-slot Milling Machine - SACHMAN Model: THORA RT Year: 2016 Control Unit: HAIDENAIN 530 X-axis travel: 2000 Y-axis travel: 1200 Z-axis travel: 1200 Table length: 1200 Table width: 1200 Maximum workpiece dimensions: D.1600 x H.950 Table surface with threaded holes Maximum workpiece weight: 5000 KG Spindle speed: 5000 rpm Spindle mount: ISO 50 Torque (continuous / 10 min): 637 Nm Number of tool positions: 40 • Chip conveyor Hedpsz Hqavefx Alwsu • High-pressure coolant system, 15 bar, with filtration system • Cooling system for spindle motor and headstock bearings • Automatic counterbalance system • Air conditioning for the electrical cabinet • Renishaw touch probe • Renishaw laser tool presetting system

Condition: good (used), Year of construction: 2007, CNC traveling column milling machine Manufacturer: KEKEISEN Machine model: UFF 4000/16 Control system: Heidenhain iTNC 530 Hodpfez Ear Sox Alwju Year of manufacture: 2007 TECHNICAL DATA X-axis travel: 4000 mm Y-axis travel: 1400 mm Z-axis travel (vertical): 1600 mm Table area: 4200 x 1500 mm Table load: 10 t Spindle speeds (gear stages): 20 – 7000 rpm Spindle drive: 30 kW Rapid traverse: 18 m/min Machine weight approx.: 24.0 t + table EQUIPMENT FEATURES + CNC control system HEIDENHAIN iTNC 530 with fast MC424 + X-axis with hydrostatic guidance + B-axis with stepless swivel function + Air, water supply through the spindle and spray ring + Edge gap filter for water purification + Additional tank and pump for deep hole drilling at 80 bar + Minimal lubrication system + Chip conveyor with water pump and water tank + Cooling unit for hydrostatic guidance + Cooling unit for spindle and gearbox cooling + NC dividing head WALTER TABIH Evolution 320 EG, year of manufacture 11/2014, with horizontal table axis and tailstock MK6, center height 320 mm, max. Subject to changes and errors in the technical data and specifications.

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 690 kg, Schaublin 13 milling machine, latest generation. The machine is in very good, fully functional condition. Original accessories and tools can be purchased separately. Spindle taper: SK30 / Iso30 X-axis travel: 320 mm Hedsz E A Dwopfx Alweu Y-axis travel: 150 mm Z-axis travel: 375 mm Spindle speed range, stepless: 58-2000 rpm Central lubrication system. Rapid traverse and feed rates in the X and Z axes. The machine can be inspected and tested under power by appointment in 5023 Salzburg. Delivery possible by arrangement.

Condition: used, Year of construction: 2010, functionality: fully functional, For sale is a powerful and precise 5-axis CNC portal milling machine from the premium manufacturer Kolb, model Studioline M. The machine is ideally suited for model making, mold making, and large-format machining. Technical data & highlights: Manufacturer: Kolb Model: Studioline M Initial commissioning: March 2010 Control system: Fidia, including handheld operating device / handwheel HPX21 Working area / travel ranges: X-axis: approx. 11,500 mm Y-axis: approx. 1,550 mm Z-axis: approx. 2,550 mm B-axis: ± 210° C-axis: ± 104° Spindle & tool: Hodpfx Aoz Ahrkelwou Tool holder: HSK 50A Spindle speed: max. 16,000 min⁻¹ Dynamics & drives: Linear axes (X, Y, Z): Feed rate up to 16 m/min Scope of supply & notes: Tables: Includes 2 square clamping tables. (Note: The 4 columns shown in the pictures are not included in the scope of supply.) Transport & handling: Dismantling & transport: The machine has already been dismantled; worldwide delivery is possible upon request. Loading: Will be carried out by us, free of charge. Condition & inspection: The machine is in a well-maintained condition, considering its age. An inspection is possible after prior arrangement. However, the machine has already been dismantled and is no longer powered. Subject to prior sale and errors in the technical specifications.

Condition: ready for operation (used), Year of construction: 2010, Immediately available ex location: CNC bed milling machine Wagner Type WBE 1300 R Year of manufacture: 2010 Siemens Sinumerik 810 D Table 1500 x 400 mm Travel X/Y/Z: 1300/500/570 mm SK 40 Automatic tool clamping Drive power 12/9 kW Spindle speeds 60 – 8,000 rpm Electronic handwheel Ball screw Vice Hsdpfx Alez Hu A Uoweu Various tool holders Weight 4 t Price: EUR 5,500 plus VAT ex location

Condition: ready for operation (used), Kölsch / Beichle Uni1-Uni4 / Universal milling machine - Universal rotary table - Coordinated milling paths X / Y / Z - Suitable for general milling operations and partial and full circular milling - Additional three-jaw chuck Hjdpfx Aloz Eyyijweu Dimensions: L x W x H 1.7 x 1 x 1.9 meters / Weight 950 kg Errors and omissions excepted.

Condition: ready for operation (used), Year of construction: 1970, Immediately available, free of any insolvency claims: Universal milling machine SHW with swivel head, vertical head, and horizontal milling attachment Type UF 1 Year of manufacture 1970 Table 700 x 310 mm Travel distances X/Y/Z 550/340/420 mm Spindle taper SK 40 Spindle speeds 46 – 2200 rpm Quill travel 80 mm Ram stroke 200 mm Feeds 12 – 254 mm/min Weight 2 tons SK 40 collets Hsdsz Hu A Ispfx Alwju Hydraulic vise Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: ready for operation (used), Year of construction: 1995, Available immediately ex-yard: CNC tool milling machine, Deckel Type FP 5 – 80 Year of manufacture 1995 CNC control: Dialog 12 Universal table: 750 x 520 mm Travel distances X / Y / Z: 800 / 550 / 500 mm Drive power: 9 kW Spindle quill stroke: 80 mm Electronic handwheel Spindle speeds: 32 – 5000 rpm Feed rates: 0 – 6000 mm/min Hjdpfx Ajz Huzkolwsu Weight: 4.5 tons Price: Euro 2,500.00 (plus VAT), ex-yard.

Condition: used, functionality: fully functional, For sale is a Deckel Maho MH 600 CNC milling machine with a Philips/Grundig CNC 532 control system. The machine comes from our own machinery stock and can be inspected on-site by appointment. This is a robust CNC milling machine from Deckel Maho with an enclosed work area and a large T-slot clamping table. Technical data / features: * Manufacturer: Deckel Maho * Model: MH 600 * CNC milling machine / machining center * Control system: Philips/Grundig CNC 532 * 3 CNC axes Hsdpfx Aozwv Aaslwsu * Travel range X: approx. 600 mm * Travel range Y: approx. 450 mm * Travel range Z: approx. 450 mm * Tool holder: SK40 * Coolant system * Enclosed work area * T-slot clamping table Important regarding the features: * No automatic tool changer * No chip conveyor * Tool changes are performed manually The Hilma machine vises shown in the photos are not included in the price. The machine is particularly suitable for single-part production, toolmaking, repair work, as well as small and medium-sized series. An inspection and demonstration can be arranged by appointment. Additional photos and information are available upon request. The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors.

Condition: excellent (used), For sale: WAGNER FCA 500 universal milling machine in very good technical condition. This machine features robust German construction and is equipped with a 3-axis digital readout (DRO), which significantly facilitates precise machining operations. The mill is ideally suited for tool shops, single-part production, as well as maintenance and service work. Technical specifications: Hodpsyrhb Ssfx Alwsu • Manufacturer: WAGNER Maschinen • Model: FCA 500 • Year of manufacture: 2004 • SINO digital readout – 3 axes (X,Y,Z) • Spindle speeds up to 2000 rpm • Power supply: 380 V • Frequency: 50 Hz • Total power: 6.5 kW Equipment: • Vertical milling head • SINO digital readout • Variable speed control • Large work table with T-slots The machine is complete, in good technical condition, and shows normal signs of use.

Condition: good (used), Used milling machine, Huron model NU 4. Its robust construction and precise design enable accurate metalworking. The machine is in good working condition and ready for operation. We provide on-site machine loading. Net price, 23% VAT applicable. Feed rate: 1.6-820 mm/min Spindle speed: 30-2066 Hodpfxozvuyuj Alweu 27 spindle speeds Travel: Y: 700 X: 1100 Z: 470 Work surface of the table: 455x1435 Spindle taper: ISO 40