Used Measuring Plate for sale (20,691)

Condition: good (used), total length: 2,000 mm, total width: 1,200 mm, Size: 2000x1200x200mm Hole size: 1300x500mm Fjdpfx Aaeur N Sdjbspn

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Fpedpfxswypp Is Aabjn Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, A used well preserved guillotine shear Vöest Alpine cutting length: 2010 mm cutting capacity in steel up to 370N/mm² tensile strength: 5 mm strokes per minute: 50 H/min Hold down pressure: 30 bar number of hold-downs: 8 pcs. backgauge manually adjustable: 950 mm throat depth: 150mm dimensions: LxWxH 280x190x140cm Fpedpfxjpgmpds Aabjn weight: 2500 kg

Condition: good (used), Year of construction: 2014, Ref. -No.: 10535 Manufacturer: ZOLLER Type: Venturion 810C3 Year of construction: 2014 Storage location: Halberstadt Country of origin: Germany Operating voltage: 100 - 240 V Machine weight: 450 kg Fsdpfxjxmd Trj Aabjpn Machine width: 2800 mm Machine Height: 2320 mm depth: 1030 mm Space requirements: 3000 x 2000 x 2600 mm Weight of control unit: 80 kg Tool weight (max.): 50 kg frequency: 50 / 60 Hz Performance: < 1 kVA Compressed air: 6 - 8 bar Noise: < 54 dbA

Condition: excellent (used), manufacturer: GRÜN SYSTEMTECHNIK WETZLER including case We offer an original ATC measuring microscope, originally taken from a TRAUB TNA turning center. The unit is designed for installation in the automatic tool changer and can be used on various CNC machines with a suitable toolholder interface (size comparable to TRAUB TNA400 Key Features & Benefits: • Universal application: Suitable for any CNC machine with compatible toolholder interface. • Fast tool setup: Enables direct measurement of cutting edges, tool lengths, and radii inside the machine. • Process reliability: Tool wear can be identified immediately and corrected without removing the tool. • Precise referencing: Useful for checking zero points, bores, and fixtures directly in the setup. Fedpfx Aajxmi A Sebspn • Time savings: Eliminates the need for external presetting devices and reduces downtime. • Compact & robust design: Easy to integrate and operate within the tool changer system. This ATC measuring microscope turns your CNC machine into a precise measuring station, helping you achieve higher accuracy, shorter setup times, and improved process reliability.

Condition: used, functionality: fully functional, Year of construction: 1985, Hydraulic Guillotine Shear Make: FASTI Model: TCHE 20/10 Year: 1985 Technical Data Brand: Fasti Model: TCHE 20/10 Year of manufacture: 1985 Sheet capacity: 2000 x 10 mm Dimensions: approx. L 2.60 x W 2.20 (plus support arms) x H 1.60 m Weight: approx. 5 t Equipment • Motorized backgauge 1000 mm with digital readout • Angle gauge • Support arms • Cut length limiter • Manual blade gap adjustment • Pneumatic hold-up device • 1 x spare blade set Fpodpfxjxmgulj Aabjn All information subject to change. A demonstration is possible at any time in our exhibition hall.

Condition: used, Year of construction: 2008, functionality: fully functional, MEASURING ARM FARO FUSION Year of manufacture: 2008 Measuring range: 2400 mm Software: Polyworks (please download the current version from the Polyworks website, ours is for Win XP) Dongle for the software is present and included Accessories: measuring spheres, tools, spare battery, cables, charger, and original transport case Last calibration: 2020 REV 26.8 Single point: 0.0510 mm Volumetric: 0.710 mm Further details can be found in the pictures Fpodoxmrymspfx Aabon

Condition: good (used), Year of construction: 1969, Hämmerle guillotine shear type AS 10, 4000x10 mm Fpjdpfsxmkf Ujx Aabjn

Condition: good (used), Original – Stop system with coupling element for an LTS 400 / 460!! and stop extension for cutting short pieces --- Roller width 400 mm --- Heavy-duty stop, can be swung up ---- 1 piece for measuring or part lengths up to 2000 mm and 1 piece for measuring or part lengths up to 3000 mm in stock Fpedpfx Aexlufcsabsn

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm weight of the machine ca. 400 kg Fpedpjtq I Rqofx Aabon Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2002, Main Drive Number of axis 3 Movement X-Axis Movement 1200 mm Y-Axis Movement 1800 mm Z-Axis Movement 1000 mm This 3-axis ZEISS Prismo 12/18/10 was manufactured in 2002. It features a fully functioning system with X-axis travel of 1200 mm, Y-axis travel of 1800 mm, and Z-axis travel of 1000 mm. If you are looking to get high-quality measuring capabilities, consider the ZEISS Prismo 12/18/10 machine we have for sale. Contact us for more information. Fodpfx Aasxlvcvobopn Application Types Measuring

Condition: good (used), functionality: fully functional, Year of construction: 2011, Motorized Guillotine Shear Make: GEKA Type: ETS 3000x1.5 mm Year: 2011 Technical Data Manufacturer: GEKA Model: 3000 x 1.5 Year of manufacture: 2011 Fpedjxl Twdspfx Aabon Working length: 3,030 mm Sheet thickness: 1.5 mm (St37) Motor power: 3 kW Weight: approx. 4 t Dimensions (L x W x H): 3.90 x 2.50 x 1.70 m Equipment • Angle stop • Motorized backgauge • Elgo P40 control • Electric sheet support device • Extendable table extension • Continuous hold-down bar • Cutting area illumination • Rear safety cage • Front drop sheet chute • Foot switch • Documentation All information subject to change and without guarantee. A demonstration in our showroom is possible at any time.

Condition: used, Year of construction: 2008, dimension of workpiece 2400 mm voltage 26,8 V total power requirement 26,8 kW weight of the machine ca. 0,040 t Fedpfoxmk Hfsx Aabjpn

Condition: good (used), Year of construction: 2008, Machine no.: B0623A0001, cutting length 6,050 mm, cutting thickness 4 mm, back gauge 1,000 mm, net weight 20,900 kg, 15 kW, control system, manufacturer Elgo Electric, model P8721, 7 supports Fsdpfxoxl Du Tj Aabjpn

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 500 mm, Coordinate measuring machine Coord3 ARES NT 7.7.5 Year of manufacture: 2014 Motorized indexable head Renishaw PH10M hand controller: Renishaw MCU LITE-2 Fsdpfx Aaju E U Hbjbjpn MPEe accuracy: 2.5 µm + L/300 Repetition accuracy: from 2.3 µm Measuring range: 700 x 700 x 500 (mm) Granite bed size: 1330x963.5x170mm Software: TouchDMIS 5.2 + dongle

Condition: used, mileage: 4,05,000 km, Year of construction: 2006, Serial number: YS2R6X2000201xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21128 Fodpfew Raf Hex Aabepn Specifications: 2012 model Km: approx. 405,000 6x2 Euro 3 Axle distance: 350/132 cm Snowplow mount Engine brake Suspension: steel Underslung blade Box (see pictures) Tires (see pictures) New heater radiator New engine hoses VBG tow hitch AC/climate Radio/DAB Ready for delivery Description:2006 Scania R500 6x2 tipper truck with snowplow setup, including mount and underslung blade.The owner has a custom start button installed by Scania; sometimes the key won’t turn.The start button works every time.See video.Ready for delivery. Km: 405000 HK: 500 Technical approved: Yes EU-approved until: 09.06.2026 Own weight: 12810 Total Weight: 29000 Payload: 16115 Width: 255 Length: 740 Euro: 3 Model: R500 6x2 brøyterigget tippbil

Condition: ready for operation (used), Year of construction: 2007, Additional Equipment Measuring Probe: Renishaw TP20 Probe Change: MCR20 (6 pieces) Fpsdpfx Ajxlvcioabon Software: “ThomControl” (with new software version retrofitted in 2018) This THOME Prazision 3D Sigma was manufactured in 2007. A reliable CMM machine, it offers precise dimensional measurement for quality control in manufacturing. Consider the opportunity to buy this THOME Prazision 3D Sigma CMM machine. Contact us for more information. Application Types Measuring

Year of construction: 2019, condition: excellent (used), image guided 3D coordinate measuring machine Manufacturer: Keyence Type: XM-1200 Series Year of manufacture: 2019 Control: Keyence Technical Data: ----- - Camera chip: 4 MP CMOS - Measuring range: 600 x 300 x 200 mm - Smallest display unit: 1 µm - Smallest angle: 0.0001 - Repeatability (locked): ±3 µm - Max. table load: 25 kg - Display: 15" TFT - Weight: 40 Kg Accessories: ----- - manuals Fedpoih R Uxsfx Aabepn - analog delivery condition (data sheet attached)

Condition: excellent (used), Year of construction: 2010, 1" image sensor, 6.6 megapixels, CMOS Fpjdpfx Aexllfgjabon Double telecentric lens Z-axis travel distance 30 mm Z-stage maximum load 3 kg

Condition: good (used), Year of construction: 2009, sheet width 3050 mm plate thickness 6.0 mm cutting angle adjustment 0.5 - 3.0 ° down holder 18 Stück no. of strokes 8 - 14 Hub/min back stop - adjustable 750 mm work height max. 770 mm Control SP 8 total power requirement 7.5 kW weight of the machine ca. 4800 kg. range L-W-H 3650 x 2100 x 1750 mm very little use (!!) from a maintenance workshop Features - Guide-railed electro-hydraulic guillotine shear - HACO control model NC SP 8 * Easy operation directly at the cutting table * Adjustment of cutting angle + backgauge * Retraction function from rear stop * Electric cutting length limitation Fodpfx Aaexmakgobopn * Emergency stop button, locking - Motor-adjustable and programmable rear stop - Electric/hydraulic cutting angle adjustment - Manual cutting gap adjustment, from the front - 1x side stop - 1,000 mm, with scale & T-slot - Front finger guard - 1x freely movable foot switch - Rear safety guard + sheet metal chute - Operating instructions (PDF)

Year of construction: 2008, condition: excellent (used), Plate heat exchanger APV H17 7.41 4.8nm2 800kw Fsdewx Hz Sopfx Aabopn APV H17 MGJ plate heat exchanger /ct2227/ Manufacturer: APV Type: H17 MGJ 10.1 Year of manufacture: 2008 Heat transfer surface: 4.08nm3 Nominal power: 800kw Width: 340mm Height: 1050mm Connection height: 137mm Depth: 60cm Pipe connection DN50,EN 1092 Capacity: Primary: 7.41Liter Secondary: 6.86 Max pressure: 10bar Test pressure 15.53 bar Max temperature: 110 °C Stainless steel pipe connections.

Condition: good (used), Calipers, calipers, calipers -Measuring range: 0-350 mm -Price: per piece -Number: 2x calipers available -Dimensions: 385/127/H10 mm Fpjdjd N N Dnspfx Aabsn -Weight: 0.4 kg

Year of construction: 2022, condition: ready for operation (used), General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) Fjdpfx Aoxd Ib Ieabjpn General Data Measurements width 1800 mm Measurements depth 5400 mm Measurements height 1950 mm Machine weight 8500 kg Main Drive Spindle motor power 11 kw Additional Equipment Teach-In NC control for automated bending processes (optional) Mechanical auxiliary arm for handling heavy workpieces (optional) Hydraulic side supports for stabilizing long sheets (optional) Infinitely adjustable bending speed (optional) This Metallkraft RBM 4 HMS Pro 3050-150 plate rolling machine was manufactured in 2022. It features a robust welded construction, induction-hardened rollers, and a hydraulic drive for the upper roller. The machine includes three digital displays for precise roller adjustments and a hydraulic folding plate for easy workpiece removal. Ideal for heavy industrial use with options for conical bending. Contact us for more information about this machine. Application Types Rolling

Condition: like new (used), machine/vehicle number: ML170mm 1554142W, Dr. Johannes Heidenhain Glass scale ML170mm 1554142W LS903 IdNr. 20908102 Length measuring device Scale Manufacturer: Heidenhain Type: ML170mm 1554142W IdNr. 20908102 For further technical data, please refer to the type plate in the attached photos. Otherwise, please note the following information and call us if necessary. Thank you very much. - Condition: please see photos, the item was stocked as a spare part, comes from the spare parts warehouse or was dismantled from an existing system. - Further information: Please note that the item may have already been used. Some scratches, stains, discolorations or cable harnesses may therefore still be present. - The item is offered as used, without any guarantee or warranty. - Some of our items have been dismantled from functioning production systems or are unused stock items, - Items have been in storage for several years and are expressly offered as "used goods", even if they have hardly been used or have only been kept in stock as spare parts. - Deviations from technical data and errors in the description of the item may occur and are reserved. - Condition/packaging as shown in the photos or according to individual agreement. - For further questions or request for more photos please contact us. - For shipping abroad, please inquire, as shipping costs vary. - For technical or other queries please contact us at any time. Fodsvakg Njpfx Aabjpn - Appointments for viewing or collection are of course possible by arrangement. If you have any questions or would like to arrange a viewing, please contact us. Thank you for your interest.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate, marking plate, straightening table -Clamping plate: with support ribs, on a solid base frame -Clamping surface: 800 x 800 mm Fpjdpfx Aswclcieaben -Table height: 930 mm -Plate thickness: 25 mm -Transport dimensions: 800/800/H930 mm -Weight: 235 kg