Used Mep Ph 100 for sale (138)

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Kdjdpfsuwrv Dox Adlot

Year of construction: 2015, condition: ready for operation (used), A MEP saw with a Kenning automation system is available. Mitering range min./max.: -45°/60°, saw blade diameter: 350mm, saw blade bore: 32mm, thickness: 2.5mm, speed: 90rpm, max. vise opening: 190mm, max. cutting capacity: 115mm. Machine dimensions X/Y/Z: approx. 2050mm/1050mm/1150mm, weight: approx. 450kg, control system: PC. Documentation available. An on-site inspection is possible. Kedpfx Aszf Ncpjdlsdt

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 380x250 mm 260 mm 250 mm 300x200 mm 180 mm Kdodjyv Ntrepfx Adlet 170 mm 200x170 mm 240 mm 210 mm 280x160 mm dimensions of saw-band 3770x27x0,9 mm speed 40/80 m/min 385 mm total power requirement 1,5/1,8 kW weight 695 kg

Condition: new, 36/72 m/min capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm capacity 45 degrees: round 260/200 mm capacity 45 degrees: square 250/180 mm capacity 45 degrees: flat 270x200/200x160 mm dimensions of saw-band 3650x27x0,9 mm total power requirement 1,5/1,8 kW Overall size 2130x1400x1950 mm Weight 670 kg Semi-automatic function: - Vice closes and engine starts - Saw head lowers for the cut - Engine shuts off - Saw head lifts, vice opens Semiautomatic dynamic system: Manual lowering of the saw blade to the desired position and cycle start Kdsdpfx Adoyv Nmljlot over the hand switch. Upper position is saved automatically.

Condition: new, dimensions of saw-band 3320x27x0,9 mm 40/80 m/min 335 mm capacity 90 degrees: round 300 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm 260 mm 250 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm 200 mm 180 mm 200x160 mm weight of the machine ca. 640 kg dimensions of the machine ca. 2140x1300x1950 mm Ksdoyv Na Sspfx Adledt

Condition: new, dimensions of saw-band 3650x27x0,9 mm speed 15/100 m/min Kedpoyv I Syofx Adlsdt capacity 90 degrees: round 280 mm capacity 90 degrees: square 260 mm capacity 90 degrees: flat 330x260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 mm capacity 45 degrees: flat 270x200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: square 170 mm capacity 60 degrees: flat 170x170 mm total power requirement 2,2 kW weight 1240 kg vice 340 mm dimensions 2020x2040x1740 mm Electro-hydraulic fully automatic band saw with additional, semi-automatic Function, for cuts from 0 ° to 60 ° left. Compact machine with the new Windows "CE" based MEP-50 controller and 7 "touch-screen display for managing all machine parameters. Easy operation and control of all cutting parameters in real time. Material feed with stepper motor via ball screw, which are mounted on opposite ball bearings; Single stroke 600 mm - repeatable to saw any length. Simple programming - Enter cutting length and quantity and press "START". - Electronic band tension control - Automatic monitoring of the cutting load by a servo-valve mounted directly on the cylinder - Rotation control of the belt with immediate stop in case of a blocked saw band Späneräumbürste and emulsion coolant pump as standard.

Condition: used, MEP Syntax Line 25 Automatic Rebar Processing Center, Used Machine Manufacturer MEP S.p.A. (Made in Italy) Model Syntax Line 25 Machine Functions Automatic straightening from coil Hydraulic cutting CNC-controlled bi-directional bending Processing Capacity (Rebar from Coil) Single-wire operation: Ø8 mm to Ø25 mm Double-wire operation: Simultaneous processing of 2 bars from Ø8 mm to Ø16 mm Kodpfx Adjzg Uv Dslsdt Material Storage Storage capacity: Up to 14 m³ Manual loading Collection tray: 12 × 2.5 m Overall Dimensions Width: 17,400 mm Depth: 2,400 mm Height: 1,600 mm Condition The built-in monitor is not operational. The machine is equipped with a video output, allowing an external monitor to be connected for operation.

Condition: used, MEP-OMES Structural Steel Cutting Machine, Hydraulic Cutting Machine, Used Machine Kdjdpfx Ajzgh Dzodljt Manufacturer MEP SpA (OMES) – Italy Model Superflex 40/2/12 (with 12-meter measuring and feeding roller conveyor) Overall Dimensions Width: 13,900 mm Depth: 2,750 mm Height: 2,400 mm Technical Specifications Cutting Capacity: Ø 8 mm – Ø 40 mm Cutting Length: Minimum 600 mm – Maximum 12,000 mm Drive System: Heavy-duty hydraulic cutting system Cutting Accuracy: ±1 mm/m with electronic programming and anti-slip feeding system Material Handling: Linear material flow with integrated roller conveyor and sorting table

Condition: used, operating hours: 16,158 h, Rebar Bending Machine, MEP FOCUS 12 Rebar Bending Machine, Used Machine Manufacturer: MEP S.p.A., Italy Model: FOCUS 12 Year of manufacture: 2006 Overall dimensions: MEP bending machine: Width: 3660 mm Depth: 1620 mm Height: 2350 mm Kdedpfezaq Dlsx Adljt Decoiler: Width: 4820 mm Depth: 1980 mm Height: 1460 mm Bending capacity: 6–12 mm Accessories: 5 pcs wire coils 1 pc 8 mm bending tool Programmability: One of the major advantages of the "Focus" series is that the bending angles can be set via an electronic control panel. There is no need to manually adjust mechanical stops as on older Hungarian machines. This significantly speeds up production when, for example, 100 identical stirrups need to be bent. The control system retains its programs even if the machine remains without power for months or even years. The software runs on a dedicated computer. MEP provides full service and technical support for all of its machines, regardless of their year of manufacture.

Condition: used, Year of construction: 2008, functionality: fully functional, MEP Shark 282 NC evo band saw machine. This robust saw is ideal for precise cuts in various materials. Kdjdszmikvjpfx Adlet MEP Shark 282 NC evo Manufacturer: Mep Type: Shark 282 NC evo Year of manufacture: 2008 Condition: used Further information available upon request.

Condition: excellent (used), Year of construction: 2004, Features Machine type: CNC automatic bandsaw Cutting angle: 0° (straight cut) Maximum round stock capacity: Ø 300 mm Maximum square stock capacity: 250 × 250 mm Maximum rectangular stock capacity: 330 × 250 mm Blade dimensions: 3650 × 27 × 0.9 mm Blade motor: 2.2 kW three-phase Blade speed: Variable, approximately 15–100 m/min via inverter Maximum clamping opening: 335 mm Bar feed: Automatic CNC with feed clamp Power supply: 400 V three-phase (50 Hz) Kedpfx Adszkubuslsdt Operating cycles: Manual, semi-automatic and programmable automatic

Condition: used, Year of construction: 2021, saw blade diameter 370x32x3 mm 15-150 U/min vice 190 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180x100 mm 115 mm 90 mm 90x90 mm 115 mm 100 mm 120x100 mm 115 mm 100 mm 120x100 mm total power requirement 5,5 kW Kedpfxoyvvpae Adljdt weight 615 kg Overall size 1400x1400x2000 mm

Year of construction: 2001, condition: good (used), machine/vehicle number: 129603-40-6, Technical data: Kedpfxed Aai Tj Adledt - Saw blade dimensions: 300 x 3.4 x 32 mm - Saw blade speed: U/min - Cutting range: - at 90° (round): 90 mm - or (square): 80 mm - Pneumatic clamping cylinders - Material feed system with positioning control - Single stroke up to approx. 1000 mm - Multiple strokes - Swiveling arm with control panel and CNC control MEP - Motorized dust extraction and chip extraction, mobile unit - Drive: 400 V / 1.1 kW - Space required: approx. W 2750 x H 1800 x D 2000 mm - Weight: approx. 600 kg

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine Kodpfexta N Aox Adlsdt - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: good (used), Year of construction: 2008, machine/vehicle number: 21100122-F, Offer 25108 Technical Data: Kdjdpfxjwq N Sws Adlet - Saw blade dimensions 350 x 3.4 x 32 mm - Saw blade speed 3400 rpm - Cutting range at 90° round 120 mm - or flat 105 x 105 mm - 180 x 70 mm - at 45° round 110 mm - flat 135 x 60 mm - Bevel adjustable left + right 45 ° - Tiltable bevel adjustment of the saw head for ship cuts left - Pneumatic vises - Discharge – roller conveyor with length stop 2000 mm - Feed – roller conveyor 3000 mm - Drive 400 V / 2.2 kW - Space requirement approx. W 600 x H 1730 x D 1200 mm - Weight approx. 180 kg

Year of construction: 1998, condition: good (used), machine/vehicle number: 080024-38 U, Offer 23332 Technical data: - Saw blade dimension 250 x 2 x 40 mm - Saw blade spindle speed 52 rpm - cutting range at 90° round 80 mm - flat 95 x 60 mm - miter adjustable up to 45 ° - Material vice - Drive 400 V / 0,5 kW - Space requirement approx. W 650 x H 1500 x D 750 mm Kodpfx Adjp Ebn Sjledt - Weight approx. 100 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Cutting capacity 90° round: ø250 mm Cutting capacity 90° rectangular: 280 x 220 mm Cutting capacity +45° round: ø230 mm Cutting capacity +45° rectangular: 220 x 200 mm Kdjdozi Ackspfx Adljt Cutting capacity -45° round: ø200 mm Cutting capacity -45° rectangular: 200 x 140 mm Cutting capacity +60° round: ø120 mm Cutting capacity +60° rectangular: 140 x 80 mm Miter range: -45° to +60° Saw blade: 2950 x 27 x 0.9 mm Blade speeds: 36/72 m/min Working table height: 285 mm Featured with: Semi-automatic band saw, Hydraulic clamping Country of origin: Italy Motor power: 1.5/1.8 kW Machine (L×W×H): 165 x 115 x 180 cm Machine weight: 475 kg

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm Kdedpfxexlzyte Adljt -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Condition: good (used), Radial fan, chip extraction fan, fan, extraction, dust extraction system, chip blower, extraction system Ksdpfx Adsh Szarelsdt -Manufacturer: MEP, extraction system with transport frame -Type: unfortunately without type designation -Motor: Cantoni 0.75 kW / 2840 rpm -Base: on wheels -Dimensions: 950/480/H1860 mm -Weight: 40 kg

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm 135x60 mm 120 mm 100 mm 135x60 mm 180 mm Kdsdpey Ruvbofx Adlet dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle Kdjdpfx Ajxdr Rtodlot - User interface with display

Year of construction: 2002, condition: good (used), MEP CONDOR 90 CNC MR automatic CNC-controlled miter saw for cutting aluminum profiles, with automatic feed. Kodjikztpepfx Adljdt Used, in excellent condition.

Condition: used, Year of construction: 2019, MEP Tiger 352 SX EVO Cut Off Saw, 4000mm Roller Conveyor with Length Stop, Weight 410kg. S/No. 562821/31B (2019) Ksdpfezr I Ahsx Adlodt Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: reconditioned (used), Year of construction: 2020, Used MEP Shark 350 NC HS 5.0 automatic band saw Blade dimensions: 4640x34x1.1mm Blade speed: 15-115 m/min (inverter) Automatic blade tensioner: 1600kg Automatic chip conveyor Adjustable clamping pressure Cutting capacity: round 350mm, square 350x350mm Kodowwr Tqepfx Adledt Year of manufacture: 2020 Machine dimensions: 3045x2025x(H)2225mm Weight: 2800kg

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, automatic metal band saw -Manufacturer: MEP, Horizontal band saw, Automatic band saw -Drive: 4.4/5.7 kW -Cutting data flat 90°: 320 x 200 mm -Cutting data for 90° square: 250 mm -Cutting data flat 45°: 240 x 200 mm -Cutting data for 45° square: 210 mm -Saw blade speed: 2x speeds -Saw blade: 3150 mm -Coolant system Kedpoy Hu H Esfx Adledt -Transport dimensions: 3 meters -Weight: 1300 kg