Used Mep Shark 320 Ax for sale (120)

Condition: new, cutting diameter 350 mm saw band length 4640 x 34 x 1,1 mm cutting width 350 mm Control NC 5.0 band speed 15 - 100 m/min capacity 0 degrees: round 350 mm capacity 0 degrees: square 350 x 350 mm table height 860 mm total power requirement 4 kW weight of the machine ca. 2,8 t Shark 350 NC HS 5.0, automatic hydraulic band saw machine in two-column for 0 ° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. The standard equipment includes: - Driven chip conveyor, can be installed on the right or left of the machine - Clamping pressure regulation of the vices - Feeder with vertical rollers for lateral material support - Numerically controlled band saw machines, which can also be operated semi- automatically, with the new MEP 50, specially developed by MEP for automatic machines, Windows "CE" based control. Cutting cycle “clean cut” The feeder pushes the workpiece backwards in order to avoid scoring at the cutting surface when the belt moves up again at the end of the cut. - Fieldbus communication system with double microprocessor and serial connection. - The user interface with 7 ”touch screen display and mechanical keys are used Lredpfswu Hhdsx Aa Isu for the operating functions of the sawmasc ins, guarantees a reliable, simple and intuitive use, as well as a real-time control of all cutting parameters standard equipment - Shark 350 NC Machine is immediately available from stock, subject to prior sale

Condition: good (used), cutting range round steel at 45°: 250 mm, cutting range round steel at 90°: 280 mm, cutting height (max.): 330 mm, Saw capacity: 280 mm round 330 mm square Saw capacity 45º: 250 mm round 250 mm square Saw speed: 40/80 mtr.min. Sawbelt: 3.320 x 27 x 0,9 mm Saw angle: 0 - 60º Featured with: - Coolingunit Lrjdpfx Ajtt Nd Rea Ieu Country of origin: Italy Motor power: 1,8 kW Machine weight: 700 kg Machine LxWxH: 190 x 120 x 135 cm

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: Lrjdpfx Aajcgbq Ie Ieu At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: used, cutting height (max.): 280 mm, MEP Shark 280 with micro spray unit Lsdpfx Aaewza T Ts Ijru chip drawer saw blade dimensions: 2950 x 27 x 0.9 mm maximum cutting capacity: 280 mm maximum vise opening: 280 mm vise height: 130 mm 2 cutting speeds swiveling cut from 0 to 60° automatic lowering manual vise clamping lubricant pump voltage: 380 V width: 900 mm depth: 1900 mm total height in raised position: 1900 mm weight: approx. 650 kg

Year of construction: 2003, condition: used, cutting capacity - round 300 mm dimensions of saw-band 3320 x 27 x 0,9 mm cutting capacity - flat 330 x 260 mm Ledpfora Rrlsx Aa Ieru cutting capacity - square 260 mm Control evolution work height max. 870 mm 40 / 80 mt/min weight of the machine ca. 1050 kg

Condition: new, cutting diameter 250 mm saw band length 2950 mm cutting width 280 mm dimensions of saw-band 2950 x 27 x 0,9 mm capacity 90 degrees: flat 280 x 200 mm capacity 90 degrees: square 230 mm capacity 45 degrees: round 190 mm capacity 45 degrees: flat 180 x 180 mm capacity 45 degrees: square 180 mm capacity 60 degrees: round 120 mm capacity 60 degrees: flat 110 x 110 mm capacity 60 degrees: square 110 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 0,4 t Ledpsppgddofx Aa Ioru Powerful miter band saw for cuts from 0 ° to 60 ° left -CCS (CutControlSystem) for automatic cutting. (Stepless regulation of the Feed and switch-off at the end of the cut) Description: -Manual cutting cycle -AUTOMATIC CUT: (via selector switch) with stepless settings of the Lowering speed and adjustment of the cutting pressure via compensating spring -Stable, torsion-resistant and low-vibration saw frame made of cast steel -Vice with quick release - Carbide band guides for maximum cutting precision -Large dimensioned deflection discs, adjustable made of cast steel -Hydraulic unit for the saw band tension and monitoring with display on Manometer (belt tension = 900 kg) -Clearly arranged control panel with all controls -Electric coolant pump for cooling and lubricating the saw band -Schipping brush for cleaning the saw band

Condition: new, MEP SHARK 281 CCS metal band saw with semi-automatic lowering. Item number: SH281CCS motor power 1,5/1,8 kW band opening 285 mm band dimensions 2950x27x0,9 mm weight 375Kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230/ 280x200 cutting area 45° right 190 / 180x180/180x180 Cutting surface 45° left Cutting surface 60° right Cutting surface 60° left Description: -Saw band arch, vise unit and base made of resistant cast iron. -Precision degree marking on the cast iron structure -Electrical system (with fully identifiable electrical wiring and low voltage 24 V system) -Switching handle IP 55 for manual cycles (if present) Lredpfx Aaecgbp Io Isu -Rotating scraper brush for the saw band -Closing unit with vice for fast approaching -Accurate stops with adjustment for miter cuts at 0°, 45°, 60° on the left side -bi-metal saw band 2950 x 27 x 0,9 mm -Wrench, instructions for use and instructions for ordering spare parts in the user's language -SHARK 281 with manual operation and SHARK 281 CCS with manual operation and cut with automatic head feed by own weight. -CCS (Cut Control System) with (A switch for manual and automatic cutting - B) regulation of cutting speed - C) hydraulic brake with tank - D) end stop for stopping the belt) also available as an option for machines already in production. -Vice with quick adjustment -Hydraulic transducer for belt tension indication -Electric coolant pump for cooling and lubrication of the saw band and manageable coolant tank above the base frame -For the versions with pneumatic vice (MA), the opening and closing of the vice is done with a manual valve (available as an option with pedal control) MEP SHARK 281 SXI evo [Semi-automatic] Part number SH281SXI motor power 1,5/1,8 kW belt opening 285 mm belt dimensions 2950x27x0,9 mm weight 435 kg Speed 36/72 m/min. cutting surface 0° 250 / 230x230 / 280x200 cutting area 45° right 190 / 180x180 / 180x180 Cutting surface 45° left Cutting surface 60° right Cutting area 60° left Description Semi-automatic function: Vise closes and motor starts, saw head lowers for cut, motor shuts off, saw head raises, vise opens. Some features: - New centralized control panel on articulated arm. - Latest generation hydraulic control unit, highly efficient and with low energy consumption. - Base with extractable coolant tank. The machine complies with CE regulations in all areas! For further technical data, please refer to the attached PDF document.

Condition: new, MEP band saw machine SHARK 331-1 NC 5.0 Spider All MEP models on request ! Motor power 2,2 kW band opening 340 mm belt dimensions 3650x27x0,9 mm weight 1.240 Kg speed 15 - 100 m/min. infinitely variable cutting area 0° 280 / 260x260 / 330x260 cutting area 45° right 260 / 250x250 / 270x200 Cutting surface 45° left Cutting area 60° right 180 / 170x170 / 170x170 Lodpfx Ajchhdisa Ijru Cutting surface 60° left Description Hydraulic bandsaw fully automatic Miter cuts up to 60° left possible saw band length: 3650x27x0,9 Single stroke: 600 mm (programmable up to 10m) Simple touch screen operation. Saw arm made of Spheroguss - robust and stable Required floor space 3,4 m² Footprint 1900mm wide x 1800 mm deep For further technical data please refer to the attached PDF document.

Condition: new, MEP SHARK 230-1 NC HS 5.0 Two-column metal band saw Item number SH230-1NCHS motor power 2,2kW band opening 235 mm Lrjdpfxschhfuo Aa Iju band dimensions 2950x27x0,9 mm weight 1.000 kg speed 15 - 100 m/min. infinitely variable cutting surface 0° 230 / 230x230 cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: SHARK 230-1 NC 5.0, electro-hydraulic twin-column fully automatic bandsaw with semi-automatic and fully automatic mode. Max. remnant length 70 mm. Bundle cuts 230 x 230 mm. Numerically controlled sawing machine with the new MEP 50- Windows based control. Material feed with stepper motor via ball screw mounted on opposing ball bearings. Single stroke 500 mm - repeatable to saw any length. Easy programming - enter cutting length and number of pieces and press "START". Electronic belt tension control. Automatic monitoring of cutting load by servo valve mounted directly on the cylinder. Rotation control of the band with immediate stop in case of a blocked saw band.

Condition: new, MEP SHARK 350 NC HS 5.0 Fully automatic two-column metal band saw Item number MEP SHARK 350 NC HS 5.0 Motor power 4,0kW Bench opening 355 mm band dimensions 4640x34x1,1 mm Lredpfx Aei Hmcdja Iju weight 2800 Kg speed 15 - 115 m/min. infinitely variable cutting surface 0° 350 / 350x350 mm cutting surface 45° right cutting surface 45° left cutting surface 60° right cutting surface 60° left Description: Automatic hydraulic band saw machine in two-column design for 0° cuts on solid material and profiles made of steel, stainless steel and steel alloys up to a maximum of 350x350 mm. Numerically controlled band saw machine which can also be operated semi-automatically, with the new MEP 50 Windows 2 "CE" based control system, specially developed by MEP for automatic machines. The standard equipment includes: Driven chip conveyor, installable on the right or left side of the machine. Clamping pressure regulation of the vices. Feeder with vertical rollers for lateral material support. Clamping pressure regulation. 100 programs can be stored. The machine is available with 34 or 41 belt - without extra charge.

Condition: new, MEP SHARK 332-1 CCS metal band saw with semi-automatic lowering. MEP authorized dealer - please send us your inquiry! Motor power 1.5/1.8 kW Bench opening 335 mm Blade dimensions 3650 x 27 x 0.9 mm Weight 640 kg Speed 40/80 m/min. Cutting area 0° 300 / 260x260 / 330x260 Cutting area 45° right 260 / 250x250 / 270x200 Cutting area 45° left 200 / 180x180 / 200x160 Cutting area 60° right 180 / 170x170 / 170x170 Cutting area 60° left Description of the MEP sawing machine: Functioning in CCS version: After the material has been advanced and the vices have been closed, the cutting process begins. The lowering is controlled by the saw's own weight, balanced by a spring and regulated by a hydraulic brake cylinder. Once the cut is complete, the saw arm is manually raised to the required position for feeding the material. Electrical control panel (marked cable connections, operational readiness indicator light, main safety switch provided with padlock, switch or speed selector, emergency stop, thermal magnet protection, 24-volt low-voltage system) Electronic blade tension converter with on-screen display. Manual vice with quick-lock mechanism Ljdpfscgbt Rjx Aa Ieru Base frame with coolant tray and chip drawer, which can be replaced with a motorized chip conveyor (accessory). Electric coolant pump for cooling and lubricating the saw blade. Chip removal brush Adjustable precision stops for making cuts of consistent length. The machine is designed for pallet truck transport. Bimetal saw blade for solid and profile material Tools and operating instructions Motor 1.5/1.8 kW 2 speeds 40/80 m/min. Vice opening 335 mm Saw blade 3650 x 27 x 0.9 Weight 640 kg See image for cutting data For further technical data, please refer to the attached PDF document.

Condition: new, MEP SHARK 382-1 SXI EVO metal band saw Hydraulic semi-automatic. Lrjdpog Hzxiofx Aa Iju MEP dealer - please send us your inquiry motor power 1,5 / 1,8 kW Bench opening 385 mm belt dimensions 3770 x 27 x 0,9 mm weight 695 kg Speed 40/80 m/min. cutting area 0° 300 / 250x250 / 380x250 cutting area 45° right 260 / 250x250 / 300x200 Cutting area 45° left 240 / 210x210 / 280x160 Cutting area 60° right 180 / 170x170 / 200x170 Cutting area 60° left Description Electro-hydraulic, semi-automatic band saw with additional manual and semi-automatic dynamic function, for cuts from 45° right to 60° left. Some features: Pivoting control panel on vertical posts. 420 mm rotary table on roller bearing with preloaded thrust bearing and interchangeable steel inserts. Double belt speed (40/80 m/min.).

Condition: used, Year of construction: 2006, MEP Cobra 350 AX automatic aluminium circular saw Pneumatic horizontal clamping of stock Pneumatic vertical clamp of stock 1 line, 6 position digital display Adjustable Cutting Depth & Stop Height Can be operated manually Condition: used Round cutting range 0°: 120 mm. Square cutting range 0°: 105 x 105 mm. Flat cutting range 0°:180 x 170 mm. Cutting range full square material 0°:80 mm. 45° square cutting range: 110 x 95 mm. 45° flat cutting range: 160 / 35 – 180 / 20 mm. Ledpfx Aoww Ay Ioa Ieru 45° cutting range with cutting head in left position with solid round/square/flat cutting disc diameter: 50/ 50/ 160 x 35 mm. Nr. 02 speed: 1700 / 3400 rpm Vice opening:180 mm. Saw blade diameter : 350 mm Drive power 3.5 Kw. Dimensions: 2000 x 1000 x 1750 mm. Weight: 600 Kg Accessories/options: manuals rollers for long workpieces

Year of construction: 2016, condition: used, MEP cutting & bending machine, SYNTAX 28 Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: up to ∅20 mm (#6) • Bar presence detector • Multifunction feeding: gripper and feed rollers • Dual shears • Bending pins accordingly to international rules Video disclaimer: This video is the manufacturer's promotional demonstration for the SYNTAX 28 model. It does not show the specific line currently for sale. Single bar: ∅10 - ∅28 mm (#3 - #8) Double bars: Up to ∅20 mm (#6) Lrsdpfx Aexl Avvoa Isu

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 11900715/C, saw blade diameter: 350 mm, feed length X-axis: 180 mm, feed length Z-axis: 170 mm, total length: 2,210 mm, total width: 1,100 mm, total height: 1,550 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 120 mm, type of input current: three-phase, rotational speed (min.): 15 rpm, rotational speed (max.): 90 rpm, cutting height (max.): 170 mm, overall weight: 530 kg, saw blade speed: 90 rpm, input voltage: 400 V, cutting range square steel at 45°: 100 mm, cutting range square steel at 90°: 105 mm, saw drive: 2,200 W, cutting diameter: 120 mm, saw blade bore: 32 mm, 2000 MEP Cobra 350AX Automatic Circular Cold Saw – Efficient Metal Cutting for Industrial Production Available now: MEP Cobra 350AX, a robust automatic cut-off circular saw, perfect for industrial metal cutting applications. Manufactured in 2000 and in good working condition, this machine combines manual and automatic operation modes, adjustable cutting settings, and a 350mm blade to deliver consistent, high-quality cuts. 🔧 Key Features: Blade Size: 350 × 32 × 2.5mm Spindle Motor Power: 2.2kW Blade Speeds: 15 / 30 / 45 / 90 rpm Vice Opening: 160mm Clamping Type: Pneumatic Power Supply: 400V / 3 Phase / 50Hz Manual & Automatic Modes: Yes Cutting Depth & Stop Height: Fully adjustable Machine Weight: 530kg Dimensions (L×W×H): 2210 × 1100 × 1550mm 📏 Cutting Capacities: At 0°: Round: 120mm Rectangular: 180 × 170mm Square: 105 × 105mm At 45° Left: Round: 120mm Rectangular: 135 × 60mm Square: 100 × 100mm At 45° Right: Round: 110mm Rectangular: 135 × 60mm Square: 95 × 95mm ⚙️ Ideal Applications: Cutting steel profiles, tubes, bars Suitable for light to medium-duty industrial production Great for fabrication shops, stockholders, and manufacturing plants ✅ Why Choose the MEP Cobra 350AX? Versatile cutting angles and profiles Dual operation mode (automatic/manual) Compact, efficient, and easy to integrate into existing workflows Pneumatic clamping ensures safety and consistency Low investment cost means big savings on a high-value machine MEP Cobra 350AX for sale Used automatic circular saw Lrodpfx Aaswtr Iyo Iju Cold saw for metal cutting Pneumatic clamping cold saw 350mm circular saw machine Industrial metal cut-off saw MEP saw 2000 model Automatic metal saw Ireland Circular saw for steel profiles 400V industrial cold saw

Condition: good (used), Year of construction: 2018, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm Ljdpfxjxn Anwj Aa Ijru capacity 90 degrees: square 100 mm capacity 90 degrees: flat 1 x 80 mm capacity 45 degrees: round 100 mm links capacity 45 degrees: round 75.0 mm rechts

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Ljdpfxexnpggj Aa Ioru Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades

Condition: good (used), Cold circular saw, metal circular saw, miter saw, circular saw, sawing system, metal saw Ledpfjxlzytsx Aa Ijru -Manufacturer: MEP, cold circular saw metal circular saw type TRL 300 pivoting on both sides -Engine: Type C 112 M -Power: 2.2 / 3.0 kW -Speed: 720 / 1450 rpm -Saw blade: Ø 315 mm -Cutting area at 90 degrees flat: 110 x 70 mm -Cutting range at 45 degrees: 100 mm -Accessories: incl.2 saw blades, see photos -Dimensions: 1230/630/H1800 mm -Weight: 273 kg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, saw band length: 2,950 mm, total height: 27 mm, cutting speed: 72 mm/min, cutting range round steel at 45°: 230 mm, cutting height (max.): 250 mm, Semi-automatic bandsaw MEP SHARK 282 SXI Evo Ledpfx Aaew Tau He Ijru Motor power: 1.5/1.8 kW Blade dimensions: 2950x27x0.9 mm Speed: 36/72 m/min Cutting area at 0°: 250 / 220x220 / 280x220 Cutting area at 45° right: 230 / 200x200 / 220x200 Cutting area at 45° left: 200 / 170x170 / 200x140 Cutting area at 60° right: 120 / 80x80 / 140x80 Machine comes with roller conveyors: Loading side: 1.5 m Unloading side: 3 m with electronic stop PS3000

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, SEMI-AUTOMATIC CIRCULAR SAW MEP TIGER 352 SX EVO - Blade rotation at 4 speeds (15/30/45/90 rpm) - Rotating table mounted on central spindle and axial bearing - Cutting head feed on double linear guideway Lrodpexdr Rtefx Aa Iju - Mechanical stops at -45°, 0°, +45°, and +60° with locking device at any angle - User interface with display

Condition: used, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 571217, saw blade diameter: 350 mm, total length: 2,360 mm, total width: 1,700 mm, total height: 1,750 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 110 mm, rotational speed (min.): 1,700 rpm, rotational speed (max.): 3,400 rpm, cutting height (max.): 120 mm, cutting length (max.): 180 mm, overall weight: 600 kg, working height: 950 mm, saw blade speed: 3,400 rpm, input voltage: 400 V, cutting range square steel at 45°: 105 mm, cutting range square steel at 90°: 105 mm, pivoting range: 45 °, compressed air connection: 6 bar, Equipment: documentation/manual, Saw blade diameter 350 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 105 mm Cutting range at 90 degrees: flat 180 x 70 mm Cutting range at 45 degrees: round 120/110 mm Cutting range at 45 degrees: square 10/95 mm Cutting range at 45 degrees: flat 135 x 60 mm Speed 1700 / 3400 rpm Including roller conveyor Lodpswl Hufjfx Aa Ieru For sale is a used COBRA 352 NC 5.0 fully automatic circular saw with semi-automatic function for sawing aluminum and light metal alloys. The machine is designed for use with carbide circular saw blades (HM). This machine enables miter cuts from 45° right to 45° left. Thanks to the alignment of the verticals along the cutting axis, it is also possible to carry out sawing operations with a saw head tilted between 0° and 45° to the left.

Condition: new, Model Name Lrodsl H Dydopfx Aa Ieu PH 261-1 HB

Condition: like new (used), Year of construction: 2019, operating hours: 1,750 h, functionality: fully functional, MEP Tiger 372 CNC LR 4.0 automatic metal circular saw (2019) Manufacturer: Mep Model: Tiger 372 CNC LR 4.0 automatic metal circular saw Year of manufacture: 2019 Condition: used, very good, inspected and cleaned Operating hours: 1750h Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range SQUARE 45° left 100 mm Cutting range SQUARE 60° left 90 mm Cutting range SQUARE 45° right 100 mm Cutting range FLAT 0° 180 x 100 mm Cutting range FLAT 45° left 120 x 100 mm Cutting range FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Continuously variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Lrodpfxjxnpf Aj Aa Ieu Length 2500 mm Width 1840 mm Height 1890 mm Weight 1060 kg Scope of delivery: – Documentation – 2 m feed roller conveyor – Machine lighting – Chip conveyor – Coolant system

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 563769, saw blade diameter: 350 mm, total length: 2,360 mm, total width: 1,700 mm, total height: 1,750 mm, cutting range round steel at 90°: 120 mm, cutting range round steel at 45°: 110 mm, rotational speed (min.): 1,700 rpm, rotational speed (max.): 3,400 rpm, cutting height (max.): 120 mm, cutting length (max.): 180 mm, overall weight: 600 kg, working height: 950 mm, saw blade speed: 3,400 rpm, input voltage: 400 V, cutting range square steel at 45°: 105 mm, cutting range square steel at 90°: 105 mm, pivoting range: 45 °, compressed air connection: 6 bar, Equipment: documentation/manual, Saw blade diameter 350 mm Cutting range at 90 degrees: round 120 mm Cutting range at 90 degrees: square 105 mm Cutting range at 90 degrees: flat 180 x 70 mm Cutting range at 45 degrees: round 120/110 mm Cutting range at 45 degrees: square 10/95 mm Cutting range at 45 degrees: flat 135 x 60 mm Speed 1700 / 3400 rpm Including roller conveyor For sale is a used COBRA 352 NC 5.0 fully automatic circular saw with semi-automatic function for sawing aluminum and light metal alloys. The machine is designed for use with carbide circular saw blades (HM). Ljdpfxowl Hr Rj Aa Ioru This machine enables miter cuts from 45° right to 45° left. Thanks to the alignment of the verticals along the cutting axis, it is also possible to carry out sawing operations with a saw head tilted between 0° and 45° to the left.

Condition: new, Model Name Lodpel H Dyljfx Aa Ioru PH 262 HB