Bandsaw - Horizontal

MEP SHARK 382-1 SXI EVO

Condition: new, capacity 90 degrees: round 300 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 380x250 mm 260 mm 250 mm 300x200 mm 180 mm 170 mm 200x170 mm Nwedpfx Aisyv Ntroqji 240 mm 210 mm 280x160 mm dimensions of saw-band 3770x27x0,9 mm speed 40/80 m/min 385 mm total power requirement 1,5/1,8 kW weight 695 kg

Year of construction: 2017, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE FOR TUBES WITH LOADING/UNLOADING SYSTEM MIN CIRCULAR SECTION: ø 25 mm MAX CIRCULAR SECTION: ø 355 mm MAX SQUARE SECTION: 260 X 260 mm MAX RECTANGULAR SECTION: 300 X 200 mm MAX ADMITTED LOAD: 100 Kg/m SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: SIEMENS 840D Nedpfxjx E Eihs Aiqswi WEIGHT: 12500 Kg NOTE: AUTOMATIC LOADING 3-12.5 mt; AUTOMATIC UNLOADING 12.5 mt; 3D CUTTING HEAD; CAPACITIVE SENSOR; AUTOMATIC ADJUSTMENT

Condition: new, cutting diameter 280 mm capacity 90 degrees: flat 380 x 260 mm capacity 90 degrees: square 260 x 260 mm Nodpfxjxaax De Aiqowi capacity 45 degrees: flat 300 x 200 mm capacity 45 degrees: round 260 mm capacity 45 degrees: square 250 x 250 mm capacity 60 degrees: flat 200 x 170 mm capacity 60 degrees: square 170 x 170 mm capacity 60 degrees: round 180 mm turning speed range: 40 / 80 m/min dimensions of saw-band 3440 x 27 x 0,9 mm engine output 1,5 / 1,8 kW dimensions of the machine ca. 1647 x 2157 mm weight 720 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: new, Year of construction: 2025, Martin panel saw T 66 Cutting height: 155 mm Saw blade diameter: 450 mm Swivelling: one-sided Drive power: 5.5 KW Edging table length: 3.0 m Cutting width: 1350 mm Parallel stop via handwheel Standard cross table for length stop for angle cuts Length stop analogue with continuous system Nwodpfxsv Erkas Aiqei Table extension at the rear T66 T6615/2-a Drive power 5.5 KW T6630/3-a Edge table length 3.0 m T 6635/3-a Cutting width 1350 mm T 6641-a Parallel stop moved via handwheel T6660/1-a Standard cross table for angle cuts T 6670-a Length stop analogue T 6680/1-a Table extension at the rear Location: from stock 54634 Bitburg - available immediately - Some of the pictures show options that are not included in the offer.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): Nodjif Ek Rjpfx Aiqjwi • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: new, weight max. in kg 1000 kg arm length 4000 mm height 3000 Unterkante Ausleger total column height 3790 mm swivelling range 270 Grad Total weight, approx. 525 kg Description: - Trolley power supply - Trailing cable, cable slack approx. 800 mm - Operation from the hallway using a pendant control including: - ABUS electric chain hoist - Chain hoist type GM 4 1000.5-2, 2-leg - painted in color RAL 5017 traffic blue - Load capacity 1 t Njdpsxak Hxsfx Aiqewi - hook path 3000 mm - highest hook position 2442 mm - Calculation basis FEM 9.901 - Drive group 2m / M5 - Lifting, 2-stage (pole switchable) 1.3 / 5 m / min - Lifting capacity 0.22 / 0.9 kW - duty cycle 60% ED - Circuits 360 c / h Overload protection The crane system complies with the requirements of the Machinery Directive 2006/ 42 / EC as well as the currently valid UV regulations DGUV regulation 52 (formerly BGV D6). included : - Anchor rods L200 (set) size LS 200 - Consists of 8 pieces M27 mm x 800 mm with 1 steel template (500/8) - for fixing the foundation, including accessories for grouting There is an assembly gap between the column base to align the slewing crane and building floor to be provided. The assembly gap is after approx. 4 weeks Crane operation to be poured under by the customer. Fig. Shows a similar crane system

Year of construction: 1987, condition: used, sheet width 150 mm coil weight 80 kg coil external diameter 650 mm Nwedpfx Aiefn Aqljqoi 1000 mm diameter of the mandrel 230 - 445 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: excellent (used), Year of construction: 2015, operating hours: 12,500 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 550 mm, spindle speed (max.): 18,000 rpm, overall weight: 12,500 kg, We offer in perfect condition Hermle C42U Dynamic with Heidenhain 640 control. Machine has 12.000 spindle hours. X-Axis travel: 800 mm Y-Axis travel: 800 mm Z-Axis travel: 550 mm Dynamic package torque axis, table Ø440 with secondary claming plates 920 x 490 mm Spindle: HSK-A63 18.000 RPM Nwsdpfezpfg Esx Aiqoi Machine will be in stock in 2 weeks

Year of construction: 2026, condition: as good as new (ex-display), Professional-grade woodworking vises Precise and meticulous workmanship Made entirely of dampened, solid beech wood All important edges are rounded Nwodpfx Aiec Uydaeqoi Surfaces are treated with environmentally friendly oil Standard equipment includes a tool drawer The two cylinder rods of the clamping jaws are precisely and securely guided within a cast part Equipped with a smooth-running trapezoidal thread spindle With a French front clamp and a German rear clamp with linear guide, two short round bar hooks, two long round bar hooks, a drawer, and an accessory drawer Finger zinc coating on the rear clamp and accessory drawer back Length of working surface without clamps: 1915 mm Width/depth of working surface without clamps: 615 mm Working height: 870 mm Length of front clamp: 520 mm Length of rear clamp: 450 mm Width of front clamp: 70 mm Width of rear clamp: 140 mm Clamping range of front clamp: 190 mm Clamping range of rear clamp: 180 mm Clamping range of front clamp to the center of the round hook: 225 mm Clamping range of rear clamp to the center of the round hook: 265 mm Plate thickness: 50 mm Length (product): 2120 mm Width/depth (product): 790 mm Height (product): 870 mm Weight (net): 91 kg Location: In stock at warehouse 54634 Bitburg

Year of construction: 2018, condition: ready for operation (used), A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible. Nwsdpfswtg H Rex Aiqji