Used Metal Cabinets for sale (37,228)

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: mechanical, laser type: fiber laser, laser power: 6,000 W, power: 6 kW (8.16 HP), type of input current: three-phase, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Series: GS-CEH Type: Exchange table, full protection, full protection exchange table Laser power: 3KW, 6KW.12KW, 15KW, 20KW Standard hardware: Scrap car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, rear lift light-blocking door, beam light curtain, partition dust removal Chsdpowxar Djfx Ai Rsd Optional hardware: Fire bricks, high-pressure proportional valve (standard above 6KW), safety door lock, independent laser cabinet, rear exchange table light curtain, rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, light-blocking rubber strip Optional functions: FDA configuration CSA configuration, TUV configuration conventional CE configuration

Condition: used, Desktop Metal Desktop Metal 3D Printer Complete System 3D Metal Printer Studio System from Desktop Metal Complete system: 3D printer + debinding machine + sintering furnace Desktop Metal The three-part solution includes a 3D printer, debinder, and furnace. Manufacturer: Desktop Metal Model: Desktop Metal Studio System Operating condition: Used (Good) Year of manufacture: 2019 Includes: Bound Metal Deposition (BMD) technology Features: Printed materials: Metal Technology: FDM Application: Industrial Other features: Office X-axis travel: 30 cm (12 in) Y-axis travel: 20 cm (8 in) Codpjzd Tlljfx Ai Rohd Z-axis travel: 20 cm (8 in) Description: In contrast to laser-based systems that selectively melt metal powder, the printer extrudes bound metal rods – similar to an FDM printer. This eliminates the safety requirements often associated with 3D metal printing, and enables new features such as the use of closed-cell fillings for lightweight strength. Desktop Metal Studio Debinder (Delamination machine) Fully automatic debinding Cleaning tank: 17.4 L (in process) / 22.5 L (storage) Description: The debinder prepares green parts by dissolving the primary binder for sintering. With a low-emission design, it requires no external ventilation and is safe for an office environment. Automatic liquid distillation and recycling mean that no refilling is required between cycles. Desktop Metal Studio Sinter Furnace Hybrid technology (microwave & conventional heating elements) Build volume: 305x205x205 mm Carbon housing Gas supply: 2 x 900 L gas cylinders Heating power: 20 kW Function: Sintering Configuration: Chamber Heat source: Gas Other features: High temperature, automatic Maximum temperature: 1,400 °C (2,552 °F) Description: Fully automated and sized to fit through an office door, the furnace delivers industrial-grade sintering in an office-friendly package. Built-in temperature profiles, tailored to each design and material, ensure uniform heating and cooling without the residual stresses that occur in laser-based systems. Condition: used Scope of delivery: (See image) (Changes and errors in technical data, information is subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, Year of construction: 2026, CORMAK KDMP400 Wet Sandblasting Cabinet The KDMP400 model has been designed for intensive industrial use. Its construction, made entirely of stainless steel, ensures high resistance to corrosion, moisture, and the abrasive effects of blasting media. As a result, the equipment maintains its durability and appearance even during prolonged operation in demanding conditions. The closed-loop water-abrasive circulation system produces a stable, homogeneous cleaning slurry, ensuring uniform surface treatment without the risk of overheating or damaging the workpiece. This process is particularly suitable for thin-walled components and parts requiring high-precision surface finishing. Key Advantages of the KDMP400 Blasting Cabinet - Dust-free sandblasting – eliminates airborne dust, allowing operation in enclosed spaces. - Stainless steel construction – provides maximum resistance to corrosion and humid environments. - High processing precision – ideal for components requiring accuracy and repeatability. Cjdpo Abak Tjfx Ai Rohd - Safe operation – no sparking and reduced risk of surface damage. - Closed-loop abrasive circulation – reduces abrasive media consumption. - Improved visibility – the absence of airborne dust allows full control over the blasting process. - Versatile applications – suitable for processing a wide range of materials. Applications The KDMP400 wet sandblasting cabinet is widely used in various industrial and service sectors, including manufacturing, component refurbishment, and precision finishing. The equipment is suitable for: - Aluminium wheel rim blasting – effective removal of paint, surface deposits, and oxidation. - Cleaning injection moulds and production tools – precise removal of contaminants from moulds and tooling. - Surface preparation – preparing components for powder coating, anodizing, and electroplating. - Stainless steel and aluminium processing – cleaning and finishing metal components. - Glass, ceramic, and plastic blasting – suitable for surfaces requiring matting or smoothing. - Post-processing of 3D-printed parts – cleaning and finishing components after 3D printing. Design and Functionality The KDMP400 cabinet is manufactured from high-grade stainless steel, ensuring a long service life and resistance to water and abrasive media. The spacious working chamber allows comfortable handling of larger components, while the sealed construction prevents moisture and contaminants from escaping into the surrounding environment. The equipment features integrated working lights for improved operator comfort and an inspection window that provides clear visibility of the workpiece. Built-in protective gloves allow precise handling of components without direct contact with the blasting medium. The blasting process is controlled by a foot-operated valve, allowing the operator to use both hands while maintaining full control over the operation. The water-abrasive mixing system ensures consistent operating parameters and uniform surface cleaning. A compressed air supply is required for proper operation, as compressed air powers the blasting process. Technical Specifications Pump 550 W / 230 V / 50 Hz Pump capacity 230 l/min LED lighting 2 × 12 W Cabinet capacity 400 l Blasting medium volume 40–60 l Nozzle diameter Ø7 mm Operating pressure 4–8 bar Working area dimensions 900 × 600 × 800 mm

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 28 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 140 rpm, bed width: 135 mm, overall weight: 160 kg, OFFER OF THE WEEK – 5% DISCOUNT! METAL TECHNICS POLSKA – professional metalworking machinery For over 12 years, we have been supplying metalworking machines to customers throughout Poland and Europe. We focus on quality, precision, reliability and professional technical support. MTP TYTAN 750 PREMIUM UNIVERSAL LATHE – 0.75 kW / 230 V WITH STEADY RESTS The MTP TYTAN 750 PREMIUM is a robust and precise universal lathe designed for workshops, production facilities and training centres. It is suitable for external and internal turning, longitudinal and facing operations, drilling, taper turning, and cutting metric and imperial threads. FEED AND THREADING GEARBOX The machine is equipped with a mechanical feed and threading gearbox with two gear-selection levers, allowing the operator to quickly and accurately select the appropriate transmission ratio for the required operation. A clear feed, threading and gear-selection chart is located directly on the front of the machine, making it easy to select the correct lever positions and change-gear configuration. Combined with precise synchronisation of the lead screw with the main spindle, this system enables accurate and repeatable cutting of metric and imperial threads. The machine bed features double-prismatic guideways, providing high rigidity, stable carriage guidance and excellent machining accuracy. The PREMIUM version also features a tailstock with an eccentric quick-lock mechanism, allowing fast positioning and secure locking. Thanks to its 230 V power supply, no three-phase electrical connection is required. IN STOCK – IMMEDIATE DISPATCH AVAILABLE! PLEASE NOTE: MACHINE STAND / CABINET IS NOT INCLUDED. TECHNICAL DATA: • Turning length: 750 mm • Max. turning diameter: 265 mm • Bed width: 135 mm • Spindle bore: 28 mm • Spindle taper: MT4 • Tailstock taper: MT2 • 3-jaw chuck: 125 mm • Spindle speed: 140–2000 rpm • Metric threads: 0.2–3.5 mm • Imperial threads: 8–56 TPI • Motor power: 0.75 kW • Power supply: 230 V • Dimensions: 1510 × 570 × 580 mm • Weight: 160 kg STANDARD EQUIPMENT: • 125 mm 3-jaw chuck • 4-position tool post • Mechanical feed and threading gearbox • Change gear set • Fixed and travelling steady rests • Set of 5 turning tools, 10 × 10 mm • Self-locking drill chuck • Drill chuck arbor • Jaw set • 2 fixed centres • Chuck guard • Chip guard • Chuck key The robust steady rests provide additional support and stability when machining longer workpieces. SALES CONDITIONS: Chedeyuc T Iopfx Ai Rjd • Brand-new machine • 12-month warranty • Warranty and post-warranty service • CE Declaration of Conformity • Technical documentation / operating manual • Delivery to the customer can be arranged Transport costs are calculated individually according to the delivery destination. We also invite you to explore the complete range of Metal Technics Polska machines.

Condition: used, H. KÖHLER GmbH Kesternich corrosion test equipment / SO₂ corrosion test system H. KÖHLER HK 300 S Corrosion test equipment according to DIN 50017 / DIN EN ISO 6988 For sale is a used corrosion test system from the manufacturer H. Köhler GmbH. The equipment is suitable for carrying out reproducible Kesternich or SO₂ corrosion tests for metals, coatings, paints and components in the laboratory, development and quality assurance. Chjdezg U Tispfx Ai Rsd Technical data Manufacturer: H. Köhler GmbH Type: HK 300 S Equipment type: Kesternich corrosion test equipment / corrosion test cabinet Test standards: DIN 50017 / DIN EN ISO 6988 (DIN 50018) Test chamber volume: approx. 300 liters Temperature range: ambient temperature to approx. +55 °C Humidity range: saturation operation possible Test chamber heating: 1,000 W Connected load: approx. 1,100 W Power connection: 230 V / 50 Hz Compressed air consumption during ventilation: approx. 3 Nm³/h Compressed air connection: 4.5 - 7.0 bar Deionized water connection: 2.5 - 4.0 bar Spray pressure: 0.7 - 1.5 bar Dimensions (without brine tank): Height: approx. 1,750 mm Width: approx. 1,200 mm Depth: approx. 600 mm Weight: approx. 100 kg Control HK PC102 microprocessor control LCD display Programmable test programs Temperature control Test sequences according to company standards and DIN 50017 Equipment Stainless steel test chamber Large glass door with seal Temperature display Test chamber thermometer Manometer Ventilation system Gas dosing device Compressed air connection Deionized water connection Exhaust air connection Operating manual Maintenance documentation EC Declaration of Conformity Application areas Corrosion testing Kesternich test SO₂ corrosion test Coating test Paint test Material test Automotive industry Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of delivery H. Köhler HK 300 S corrosion test equipment Operating manual EC Declaration of Conformity Maintenance documentation Documentation Accessories as shown in the pictures The machines, tools and other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight transport possible. Subject to change, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 460 kg, total width: 610 mm, total length: 1,850 mm, total height: 1,590 mm, SHEET METAL BEADING MACHINE ETB 40 – METAL TECHNICS POLSKA PROFESSIONAL SHEET METAL BEADING MACHINE The ETB 40 Sheet Metal Beading Machine is a robust and efficient machine designed for producing beads, grooves, flanges, reinforcing ribs, and other forming operations in sheet metal. Thanks to its heavy-duty construction, high precision, and a wide range of interchangeable forming rolls, it is ideal for metal fabrication workshops, HVAC duct production, sheet metal processing, and general industrial manufacturing. The machine enables fast and accurate production of repeatable profiles, improving productivity while maintaining excellent quality. KEY FEATURES • Maximum sheet thickness: 4 mm • Powerful 2.2 kW electric motor • Heavy-duty steel construction • 300 mm throat depth • Precise material guidance • Suitable for a wide variety of beading and flanging operations • Quick and easy roll replacement • Ideal for HVAC, tanks, enclosures, and steel fabrication • High manufacturing quality • Machine available from stock Csdpfezkubzjx Ai Rjhd TECHNICAL SPECIFICATIONS • Model: ETB 40 • Maximum sheet thickness: 4 mm • Roller width: 165 mm • Throat depth: 300 mm • Roller speed: 15.3 rpm • Motor power: 2.2 kW • Dimensions (L × W × H): 1850 × 610 × 1590 mm • Weight: 460 kg APPLICATIONS The ETB 40 is ideal for manufacturing: • HVAC ducts and fittings • Air-conditioning components • Cylinders and tanks • Machine enclosures • Decorative sheet metal components • Flanges, reinforcing beads and stiffening profiles • Components for the automotive and steel fabrication industries HEAVY-DUTY CONSTRUCTION The machine is built on a rigid welded steel frame, ensuring excellent stability, high precision, and long service life even under intensive industrial use. EASY OPERATION The ergonomic design and intuitive controls allow fast roll changes and quick machine setup for different forming operations. This makes the ETB 40 suitable for both small workshops and high-volume production. TRANSPORT & TECHNICAL SUPPORT We organize machine transportation throughout Europe as well as to countries outside the European Union. Every transport quotation is prepared individually based on the delivery destination. We provide professional technical advice, warranty and after-sales service, and ongoing technical support from our specialists. Customers are also welcome to collect the machine directly from our warehouse in Sokołów Podlaski, Poland. WHY CHOOSE METAL TECHNICS POLSKA? For many years, Metal Technics Polska has been supplying high-quality metalworking machinery to customers across Europe. We provide complete support—from technical consultation and machine selection to transportation, commissioning, and long-term after-sales service. If you would like to receive a quotation or learn more about this machine, please contact our sales team. Visit the Metal Technics Polska website to explore our complete range of sheet metal working machines and discover our latest products and promotions.

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 21197, overall weight: 2,100 kg, number of drawers: 100, power: 2 kW (2.72 HP), Gühring TM-136 Tool Storage System Year: 2006 Chsdpjz Arz Nsfx Ai Red Power supply: 230 V, 2 kW Empty weight: 2,100 kg Maximum total load: 6,000 kg Industrial tool dispensing and storage system with various drawer sizes. Used condition. More information and photos available on request.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Chedpfeyq Rkyex Ai Rjd Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: used, Year of construction: 2017, Picking cabinet Cedpfs Agpdrjx Ai Rohd Manufacturer: MATRIX Type: MAXI Year of manufacture: 2017 Technical details: Operating voltage: 230 V Current consumption: 5.3 A Mains frequency: 50/60 Hz Condition: used Accessories, tools, and clamping devices shown are included in the scope of delivery only if this is explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Model: IQ³ Chodev T Ah Espfx Ai Red Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 220-240 V, 1 Ph, 50/60 Hz, 3 A Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. Chedpfjxdmgvsx Ai Red 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 260 mm, spindle bore: 80 mm, turning diameter: 460 mm, turning length: 1,000 mm, total length: 2,200 mm, total width: 1,080 mm, total height: 1,650 mm, spindle speed (max.): 1,700 rpm, spindle speed (min.): 25 rpm, bed width: 300 mm, overall weight: 1,655 kg, NEW DELIVERY – UNIVERSAL LATHE 460 × 1000 mm – BRAND NEW, IN STOCK, READY FOR IMMEDIATE DISPATCH New delivery just arrived: brand-new universal lathe with 3-axis digital readout, available immediately from our warehouse. Heavy cast-iron bed with hardened and precision-ground ways, 80 mm spindle bore, 5.5 kW main motor and 1000 mm turning length – a solid machine for production plants, maintenance departments, toolrooms and workshops. Key features • Turning length 1000 mm, spindle bore 80 mm • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • 5.5 kW main motor (S1 duty) • Removable bridge – turning up to 690 mm in the gap • Hardened and ground gears, 12 spindle speeds • Wide range of metric, inch, module and D.P. threads, lead screw and feed shaft Technical data Swing over bed: 460 mm Swing over cross slide: 260 mm Swing in gap: 690 mm Maximum turning length: 1000 mm Bed width: 300 mm Spindle nose: D1-8 CAMLOCK Spindle bore: 80 mm Spindle taper: MT7 Spindle speed: 25 – 1700 rpm, 12 speeds Codpfx Ae Abbgvei Rehd Maximum tool size: 25 × 25 mm Longitudinal feed range: 0.031 – 1.7 mm/rev (42 steps) Cross feed range: 0.014 – 0.784 mm/rev (42 steps) Metric threads: 0.1 – 14 mm (41) Inch threads: 2 – 112 T.P.I. (60) Diametral pitch threads: 4 – 112 D.P. Module threads: 0.1 – 7 M.P. Tailstock quill diameter: 60 mm Tailstock quill travel: 130 mm Tailstock taper: MT4 Top slide travel: 125 mm Cross slide travel: 295 mm Longitudinal travel: 750 mm Maximum length of installed part: 900 mm Main motor power: 5.5 kW Coolant pump power: 0.1 kW Dimensions (L × W × H): 2200 × 1080 × 1650 mm Weight: 1655 kg Standard equipment • 3-axis digital readout with optical scales • 250 mm 3-jaw chuck • Set of six anti-vibration mounts • Fixed steady rest and travelling steady rest • Fixed centre MT4, reducing sleeve MT7/MT4 • Change gear set • Coolant system with pump • LED work light • Lubricator, set of keys and tools • CE-compliant safety guards • Operating manual, CE declaration of conformity Condition and availability Brand new machine – new delivery, in stock in our warehouse, available immediately. Terms Price net (excl. VAT), EXW Sokołów Podlaski. 12 months warranty on parts. Documentation and manual included. Delivery to any European destination possible – transport quote on contact.

Year of construction: 2026, condition: new, Metal separation system – WPS-1000 + 12,000 gauss magnetic separator Metal separation system consisting of a vibrating table, a magnetic drum belt separator, and a WPS-1000 eddy current separator. Designed for the separation of ferrous and non-ferrous metals from bulk materials in recycling processes. OPERATING PRINCIPLE The vibrating table feeds and distributes the material evenly. The magnetic separator captures magnetically susceptible particles. The WPS-1000 eddy current separator then separates non-ferrous metals, such as aluminum and copper, from the remaining material stream. VIBRATING TABLE AND MAGNETIC DRUM BELT SEPARATOR • Vibrating table width: approx. 1,000 mm • Vibrating motor power: 2 × approx. 0.8 kW Chedps Afw Ukofx Ai Rjd • Magnetic drum width: approx. 1,100 mm • Magnetic roller diameter: approx. 200 mm • Magnetic flux density: approx. 12,000 gauss • Conveyor belt motor power: approx. 1.1 kW • Reinforced PVC conveyor belt • Structure partially made of stainless steel WPS-1000 EDDY CURRENT SEPARATOR • Magnetic rotor with NdFeB neodymium magnets • Magnetic rotor length: 1,000 mm • Rotor motor power: 7.5 kW • Conveyor belt motor power: 1.5 kW • Variable rotor and conveyor belt speeds • PVC conveyor belt with a sealing side skirt • Enclosed separator structure • Adjustable splitter for separating material fractions • IP55-rated control cabinet with a safety system • Color: RAL 3001 Adjustable rotor speed, conveyor belt speed, and splitter position allow operating settings to be adapted to the processed material. Separation performance depends on material composition, particle size, and feeding conditions.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, turning length: 3,000 mm, feed length X-axis: 420 mm, quill travel distance: 235 mm, total length: 4,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 4,300 kg, disc diameter: 450 mm, faceplate diameter: 450 mm, MACHINE IN STOCK – AVAILABLE FOR IMMEDIATE DISPATCH Transport can be arranged directly to the customer anywhere in Europe. Transport cost is quoted individually according to the delivery postcode and destination. MTP CQ6280 HEAVY-DUTY UNIVERSAL LATHE 800 × 3000 – Ø105 mm SPINDLE BORE – 7.5 kW – 3-AXIS DRO Metal Technics Polska – Professional Metalworking Machinery The MTP CQ6280 800 × 3000 is a heavy-duty universal lathe designed for demanding professional and industrial machining applications. Its rigid construction, large working capacity and Ø105 mm spindle bore make it suitable for machining large shafts, cylindrical components, tapers, stepped parts and internal or external threads. With an 800 mm swing over bed, 3000 mm turning length, 400 mm wide bed and a machine weight of approximately 4300 kg, the CQ6280 provides the stability required for heavy workshop and production use. The machine is equipped with a 7.5 kW main motor and 3-axis Digital Readout (DRO) for accurate and convenient machining. TECHNICAL DATA • Maximum turning length: 3000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mounting: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev Csdjyz Ubxjpfx Ai Rohd • Z-axis feed: 0.044–1.48 mm/rev • Tailstock quill diameter: Ø90 mm • Tailstock quill travel: 235 mm • Tailstock taper: MT5 • Tailstock cross adjustment: 11 mm • Metric threads: 0.45–120 mm • Module threads: 0.25–60 mm • Diametral Pitch threads: 0.88–160 DP • Whitworth threads: 7/16–80 TPI • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions: 4740 × 1140 × 1910 mm • Weight: approx. 4300 kg STANDARD EQUIPMENT • 3-axis Digital Readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Drive plate • Fixed steady rest up to Ø250 mm • Travelling steady rest • Coolant system • Chuck guard • Fixed splash guard • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for: • large shafts and cylindrical components, • tapers and stepped workpieces, • internal and external threading, • repair and maintenance work, • heavy workshop machining, • general industrial production. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase, as well as warranty and post-warranty support. Professional transport can be organised throughout Poland and the whole of Europe directly to the customer’s destination. Please provide your delivery postcode and city for an individual transport quotation.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center height in crank: 517 mm, center width: 400 mm, turning length: 1,500 mm, feed length X-axis: 420 mm, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,240 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 2,600 kg, MTP CQ6280 Lathe 800 × 1500 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CQ6280 is a heavy-duty universal lathe designed for machining shafts, tapers, spherical surfaces and internal and external threads using turning tools, drills and threading tools. With a swing over bed of 800 mm, a turning length of 1500 mm and a Ø105 mm spindle bore, it is ideally suited for professional workshops and industrial production. TECHNICAL DATA • Maximum turning length: 1500 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm Csdjyzzghspfx Ai Rehd • Swing in gap: 1035 mm (gap length 330 mm) • Bed width: 400 mm • Z-axis travel: 230 mm • X-axis travel: 420 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm (16 speeds) • Spindle bore: 105 mm • Spindle nose: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev (25 steps) • Z-axis feed: 0.044–1.48 mm/rev (25 steps) • Tailstock quill: Ø90 mm, MT5, 235 mm travel • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm (54) • Module threads: 0.25–60 mm (46) • Whitworth threads: 7/16–80 TPI (54) • Diametral Pitch threads: 0.88–160 DP (42) • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3240 × 1140 × 1910 mm • Weight: 2600 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard and splash guard • Coolant system • Reduction sleeves • Fixed centre • Tool set DELIVERY, WARRANTY & SERVICE Delivery can be organised to any destination in Europe. The machine is supplied with a 12-month warranty on parts, with technical service and support available throughout Europe.

Condition: good (used), functionality: fully functional, 1 x Fortress Technology standard metal detector head. Model – PHANTOM. Serial number – J-19842-11013. Aperture dimensions – 350mm wide x 175mm high. Frequency – 153 kHz. Voltage rating – 200-240 V / 50-60 Hz / 1 phase. Cedpfxo Ahutvj Ai Rehd

Condition: new, Year of construction: 2015, functionality: fully functional, controller manufacturer: abb, controller model: abb, Equipment: documentation/manual, New ABB gas analysis cabinets, completely new, AO2020 el3020 and more, 3 units available. For more information, see photos. Each cabinet comes with a pallet of loose parts. Price per cabinet. Chedpfsyfhwtjx Ai Rjd

Condition: new, functionality: fully functional, Year of construction: 2026, control type: manual, degree of automation: semi-automatic, actuation type: electric, number of rollers: 3, roller (bottom) diameter: 59 mm, roller (top) diameter: 59 mm, side roll diameter: 59 mm, overall weight: 420 kg, total length: 1,700 mm, total width: 400 mm, total height: 1,100 mm, input voltage: 400 V, input frequency: 50 Hz, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, MTP ESR 1300 × 1.5 mm – Electric 3-Roll Sheet Metal Bending Machine MACHINE IN STOCK – READY FOR IMMEDIATE DISPATCH Price: €2,080 net EXW European delivery available – transport quotation on request. The MTP ESR 1300 × 1.5 mm is a compact, electrically driven 3-roll sheet metal bending machine designed for rolling cylindrical parts, tubes, sleeves, rings and light conical components from sheet metal. The machine combines a rigid welded frame with hardened, high-quality steel rolls and simple mechanical adjustment. It is suitable for workshops, metal fabrication companies, maintenance departments and small/medium production facilities. MAIN TECHNICAL DATA • Working length: 1300 mm • Maximum sheet thickness: 1.5 mm • Roll diameter: 59 mm • Motor power: 0.75 kW • Dimensions: 1700 × 400 × 1100 mm • Weight: approx. 420 kg • System: 3 rolls • Drive: electric • Condition: brand new MACHINE FEATURES The machine uses a three-roll bending system with eccentric pressure adjustment. The upper and lower rolls are manufactured from high-grade hardened steel, providing good wear resistance and stable forming accuracy. The rolls are equipped with grooves for rolling rings and wire-type sections. The machine can also be used for basic cone rolling within its standard adjustment range. The photographs show a robust and straightforward mechanical construction with: • manual handwheel and lever adjustment, • electrically driven roll rotation, • front-mounted control panel, • emergency stop button, • foot pedal operation for convenient starting and reversing of the rolling process, • safety cord / perimeter emergency protection, • solid floor-standing frame, • accessible mechanical components for easy adjustment and maintenance. Foot control allows the operator to keep both hands free for positioning and guiding the sheet during forming, which is especially useful when working with larger panels. APPLICATIONS Cjdpfjz Hx Eajx Ai Rohd Suitable for producing: • cylindrical sheet-metal components, • pipes and sleeves, • rings, • curved panels, • light conical parts, • workshop and fabrication components. SALES & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, rolling technology and correct working parameters for different materials. We provide warranty and post-warranty service and can organise professional transport throughout Poland and the whole of Europe. The machine is brand new, CE marked, covered by the manufacturer’s warranty and available immediately from stock. Please contact us for delivery costs, additional technical information, photos or a commercial quotation.

Condition: ready for operation (used), functionality: fully functional, controller model: Rexroth CNC-Steuerung, working width: 1,330 mm, sheet thickness (max.): 3 mm, straightening roller diameter: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sheet thickness: 0.7–3.2 mm Working width: max. 1,330 mm Number of straightening rollers: 5 Straightening roller diameter: 100 mm Number of feed rollers: 2 Feed roller diameter: 100 mm Coil inner diameter: 530–610 mm MACHINE DETAILS Cjdps Af Hdzjfx Ai Rshd Control system: Rexroth CNC control (for length and quantity) Drive type: Hydraulic Dimensions & Weight Machine weight: 9,500 kg Installation length: 6,500 mm Installation width: 3,300 mm EQUIPMENT Uncoiler: Metform, 5 t Coil loading cradle Shear: Morgan PG1500-3.2

Condition: good (used), functionality: fully functional, 1 x Safeline pipeline metal detector with reject diverter valve, reject bin and some stainless-steel wall-mounting frame. Codpfx Ais Ahurqs Rjhd Previously used for pie/savoury fillings. Serial number - 23586. Aperture dimensions - 100mm (approximately).

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Cjdpfxew A Iils Ai Rshd Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: used, functionality: fully functional, operating hours: 33,105 h, Year of construction: 2015, laser hours: 6,024 h, laser power: 15,000 W, We offer a used PHENIX SYSTEMS Prox 300 (DMP) system, manufactured in 2015. Manufacturer: PHENIX SYSTEMS Model: Prox300, Type: 5006073Z00 DMLS Technology: Direct Metal Laser Sintering. Materials: Metal, Ceramic (used on Inconel). Year of Manufacture: 2015 Serial Number: 1584305 Chsdo Ahzbpepfx Ai Rjd Type: 5006073Z00 Power: 15 kW Voltage: 400 / 480 V If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 12.22 C5205905, overall weight: 13,000 kg, FINN-POWER C5 CNC | 1250 x 2500 mm | 30 Ton | Year 2005 FINN-POWER C5 CNC Turret Punch Press For sale: Finn-Power C5 CNC turret punch press, manufactured by the renowned Finnish sheet metal processing machinery producer. The machine has been used in regular production and remains complete, operational, and ready for further use. The machine can be inspected under power by prior appointment. Sale with VAT invoice. All costs related to dismantling, loading, transportation, and reinstallation are the responsibility of the buyer. Technical Specifications Manufacturer: Finn-Power Model: C5 Year of Manufacture: 2005 Control System: Siemens Sinumerik Maximum Sheet Size: 1,250 × 2,500 mm Punching Force: 300 kN (30 tons) Turret Capacity: 20 tool stations Chodpfxo Ah Ha As Ai Rod Operating Pressure: 300 bar Machine Weight: approx. 13,000 kg Equipment Turret equipped with tooling Additional tool holders and tools included Siemens Sinumerik control system Brush table Technical documentation available on site Manual sheet loading Machine Condition Machine operated in production until 30 September 2026 Regularly used and maintained All major components complete Available for inspection and testing Key Advantages ✅ Proven Finn-Power technology ✅ 30-ton punching capacity ✅ Working area 1,250 × 2,500 mm ✅ Siemens Sinumerik CNC control ✅ Tooling package included ✅ Available for live inspection

Condition: new, Year of construction: 2026, functionality: fully functional, table load: 10,000 kg, spindle diameter: 130 mm, spindle speed (min.): 4 rpm, spindle speed (max.): 800 rpm, total height: 3,800 mm, total length: 7,030 mm, total width: 4,665 mm, table length: 1,800 mm, table width: 1,600 mm, type of input current: three-phase, overall weight: 29,300 kg, spindle motor power: 15,000 W, MTP TPX6113-2 HORIZONTAL BORING MACHINE Horizontal Boring Machine TPX6113/2 – Precision and Power for Heavy Machining The TPX6113/2 horizontal boring machine is a robust and efficient solution designed for precise machining of large and heavy workpieces. Thanks to its rigid construction and high technical performance, it is ideally suited for use in the mechanical, energy, and steel structure industries. The machine is equipped with a Ø130 mm spindle, ensuring high stability and enabling demanding machining operations. A powerful 15 kW main motor and high torque guarantee efficient performance even under heavy loads. The large worktable (1800 × 1600 mm) with a maximum load capacity of 10,000 kg allows machining of heavy components without compromise. The full table rotation (B axis – 360°) increases flexibility and enables multi-side machining without repositioning the workpiece. Technical Specifications: Spindle diameter: Ø130 mm Max spindle torque: 3136 Nm Max spindle feed force: 31,360 N Number of spindle speeds: 24 Spindle speed range: 4–800 rpm Main motor power: 15 kW Max facing head torque: 4900 Nm Facing head diameter: 750 mm Facing head speed range: 2.5–125 rpm Number of facing head speeds: 18 Table size: 1800 × 1600 mm Max table load: 10,000 kg T-slots: 28 mm × 10 Axis travels (X/Y/Z/W/U): 2000 / 1800 / 2000 / 900 / 250 mm Table rotation (B axis): 360° Rapid feed (X/Y/Z/W): 2500 mm/min Feed per spindle revolution (X/Y/Z/U): 0.05–8 / 0.01–2 mm/rev Measurement system accuracy (X/Y/Z): 0.005 mm (Z optional) Measurement system accuracy (B axis): 0.001 mm (optional) Dimensions: 7030 × 4665 × 3800 mm Machine weight: 29,300 kg Codpfey Eyg Uex Ai Rehd

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 570 mm, spindle bore: 105 mm, turning diameter: 800 mm, turning diameter over bed slide: 800 mm, center width: 400 mm, turning length: 2,000 mm, feed rate X-axis: 420 m/min, feed length Z-axis: 230 mm, quill diameter: 90 mm, quill travel distance: 235 mm, total length: 3,740 mm, total width: 1,140 mm, total height: 1,910 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 25 rpm, swing diameter over cross slide: 570 mm, metric thread diameter (max.): 120 mm, metric thread steps: 54, bed width: 400 mm, Turning diameter in gap: 105 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 25 rpm, type of input current: three-phase, swing diameter over bed slide: 570 mm, overall weight: 3,800 kg, disc diameter: 450 mm, three-jaw chuck diameter: 320 mm, faceplate diameter: 450 mm, MTP CW6180X2000 – Heavy-Duty Universal Lathe 800 × 2000 – Ø105 mm Spindle Bore – 7.5 kW – 3-Axis DRO Metal Technics Polska is a manufacturer and importer of professional metalworking machinery. We supply proven technologies from Poland, Europe and Asia to companies throughout Europe and have focused on quality, precision and reliability for 15 years. The MTP CW6180X2000 is a heavy-duty universal centre lathe designed for professional machining of shafts, cylindrical components, tapers, spherical surfaces and internal or external threads. With an 800 mm swing over bed, 2000 mm turning length and a large Ø105 mm spindle bore, the machine is suitable for demanding workshop and industrial applications. Its rigid 400 mm wide bed, powerful 7.5 kW main motor and extensive threading and feed ranges make it a versatile machine for repair workshops, toolrooms, maintenance departments and general production. TECHNICAL DATA • Maximum turning length: 2000 mm • Swing over bed: 800 mm • Swing over cross slide: 570 mm • Swing in gap: 1035 mm • Gap length: 330 mm • Bed width: 400 mm • X-axis travel: 420 mm • Z-axis travel: 230 mm • Tool post swivel range: 70° • Spindle speed: 25–1600 rpm, 16 speeds • Spindle bore: Ø105 mm • Spindle nose / mount: D1-8 • Spindle taper: MT5 • X-axis feed: 0.022–0.74 mm/rev, 25 steps • Z-axis feed: 0.044–1.48 mm/rev, 25 steps • Tailstock quill diameter: Ø90 mm • Tailstock taper: MT5 • Tailstock quill travel: 235 mm • Tailstock adjustment: 11 mm • Metric threads: 0.45–120 mm, 54 ranges • Module threads: 0.25–60 mm, 46 ranges • Whitworth threads: 7/16–80 TPI, 54 ranges • Diametral Pitch threads: 0.88–160 DP, 42 ranges • Main motor power: 7.5 kW • Power supply: 400 V • Dimensions (L × W × H): 3740 × 1140 × 1910 mm • Weight: approx. 3800 kg STANDARD EQUIPMENT • 3-axis digital readout (DRO) • 3-jaw chuck Ø320 mm • 4-jaw chuck Ø400 mm • Faceplate Ø450 mm • Driving plate • Fixed steady rest, max. Ø250 mm • Travelling steady rest • Chuck guard • Splash guard • Coolant system • Reduction sleeves • Dead centre • Tool set APPLICATIONS Suitable for machining: • shafts and large cylindrical components, • tapers and stepped parts, • internal and external threads, • repair and maintenance components, • general industrial production work. SALES, DELIVERY & SUPPORT We provide professional technical advice before purchase and comprehensive after-sales support. We can assist with machine selection, tooling and machining parameters. Professional transport can be organised throughout Poland and the whole of Europe. Warranty and post-warranty service are available. Chodpfx Aeyzz Sqsi Red Please contact us for current availability, delivery costs, additional photographs, technical information or a personalised commercial quotation.