Used Metal Saw Machine for sale (85,335)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Kdedpfx Acoxnnfbswew Type: DiscMaster SF 2/2 - 1500 Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Minimum air speed at the machine connection : 30 m / s Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Weight: 3,400 kg Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Year of construction: 1992, condition: used, Vollmer Kdsdpfokmnyfox Acwew Saw blade shearing machine type NS 700 Year 1992

Condition: good (used), Year of construction: 1963, machine/vehicle number: 30769, saw blade diameter: 300 mm, input frequency: 50 Hz, input voltage: 380 V, Heller Brothers SA 315 -WKG 972 Kdedourkypjpfx Acwjw On offer here is an automatic saw blade grinding machine from Gebrüder Heller. Technical data: Saw blade diameter: 300 mm Clamping angle: 20 ° Lateral displacement: 73 mm Power supply / connected load: 380 Volt 50 HZ Factory No.: 30769 Rated current: 2 A

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm Kdedpfx Aegd Si Eecwjw 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, type of input current: three-phase, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, sheet thickness copper (max.): 100 mm, sheet thickness brass (max.): 100 mm, total length: 1,500 mm, total width: 1,100 mm, total height: 1,700 mm, workpiece weight (max.): 500 kg, overall weight: 680 kg, working height: 100 mm, input voltage: 400 V, warranty duration: 12 months, pass-through width: 600 mm, table length: 1,300 mm, table width: 600 mm, workpiece height (max.): 100 mm, input frequency: 50 Hz, workpiece width (max.): 600 mm, operating speed: 33 mm/s, table height: 1,010 mm, grinding wheel diameter: 150 mm, grinding width: 600 mm, height adjustment type: mechanical, input current: 20 A, Equipment: CE marking, documentation/manual, type plate available, Polish Deburring Machine – Direct from Manufacturer We are proud to present our high-quality deburring machines, manufactured in Poland by Madora Sp. z o.o., a trusted and experienced company specializing in metal and woodworking machinery. With decades of expertise and innovation, Madora is known for delivering durable, efficient, and user-friendly solutions tailored to the needs of industrial clients across Europe. Our machines are designed for precision, performance, and long-term reliability—all at competitive prices. The smallest model in the MADORA range, the GP 600 2Z, is a versatile deburring machine for cleaning sheet metal after various cutting processes. Equipped with two "Z"-type machining units, it offers outstanding flexibility and high machining capacity. The machine can perform two operations simultaneously: not only can it remove scale after plasma cutting, but it is also able to deburr or round the edges of workpieces after laser cutting—all in a single pass. Its machining width of up to 600 mm allows for the efficient processing of small and medium-sized components. With suitable tooling, the GP 600 2Z handles heavy edge rounding and oxide removal as well. Kedpswzu A Njfx Acwjdw The GP 600 2Z deburring machine features an electronic numeric control panel, which allows the operator precise and continuous adjustment of machining parameters such as workpiece height, feed rate, and tool rotation speed. Each machining unit can be controlled independently, giving the operator full flexibility to select the required process steps within a single pass.

Condition: new, Year of construction: 2025, Automatic roofing sheet forming machine for aluminum or galvanized steel sheet with a sheet width of 1000mm. Includes automatic sheet decoiler, Siemens control system, and technical documentation. Kdedpfxjw A Rt Hs Acwow

Condition: new, Sheet metal deburring machine similar to Timesaver Kedpext Dvyefx Acwodw

Condition: used, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle 0º Kdjdpoxn Itrsfx Acwjw ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding. WARNING! THE MACHINE IS RETURNED, SERVICED, NO PACKAGING.

Condition: good (used), Code: 0046 Brand: KUPFERMUEHLE - GERMANY Model: DOIN - VUIN 605 2-shaft planing machine + multi rip saw for wood carpentry, wood beams, roofing, sawmill, coffins and various Technical data: Heavy cast iron structure Working width mm 605 Min/max working height mm 3/200 Min workpiece length mm 350 Automatic group lifting with possibility of manual adjustment Feed speed mt/min 7 - 9 - 11,5 - 14 - 18 - 23 Infeed table with 3 support guides and motorized top feed rollers Height adjustable guide saw unit - Motor Hp 2,5 - Blade diameter mm 180 - Suction port mm 120 Kodov D N Efepfx Acwjdw Motorized towing roller on the table 1° shaft surface planer with 4 knives - Motor Hp 7,5 - Suction port mm 120 2° shaft thickness planer with 4 knives - Motor Hp 12 - Suction port mm 160 - Motorized towing roller on the table 3° Multiblade saw shaft - Motor Hp 40 - Blade diameter mm 230 - Cutting height mm 50 - Upper suction port mm 160 - Lower suction port mm 160 N° 2 upper motorized towing rollers and N°1 lower roller Control panel Overall dimensions mm 3300 x 1650 x 1600 h Weight kg 4000

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Kjdehk Df Djpfx Acwjdw Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: used, Year of construction: 2009, machine/vehicle number: 150006, Offer 25301 Technical Data: - Cutting capacity at 90° round: 280 mm - Square: 280 x 280 mm - At 45° round: 240 mm - Square: 210 x 210 mm - Saw band dimensions: 3400 x 27 x 0.9 mm Kdjdpfextmzlex Acwew - Infinitely variable cutting speed: 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Infinitely variable cutting pressure adjustment: 0 to 10 m/min - Total drive power: 400 V / 1.7 kW - Coolant system - Stop - Required space approx.: W 900 x H 1100 x D 1800 mm - Weight approx.: 550 kg

Condition: used, Year of construction: 2010, functionality: fully functional, machine/vehicle number: 84659300, Machine consists of 3 working units: 1st. XSV Brushes (12 rotating and oscillating brushes) Kedpfexn Ifuox Acwodw 2nd XSV Brushes (12 rotating and oscillating brushes) 3rd Roller brush Feeding belt 1350 mm.

Condition: refurbished (used), Year of construction: 1985, Cana SL + EMSL with feed from the left to the grinding wheel Very good condition, ready for immediate use Flank grinding machine - Leveling machine EMS-L left-hand version for stellite-tipped and upset band saw blades Technical data CANA SL Grinding wheels Ø 250mm Tooth pitch 25 to 100mm Tooth height at 0° rake angle: up to 30mm Band saw width 70 to 360mm rake angle 0° to 30° Kdodpori Nh Tsfx Acwow Working speed 30 teeth / min 3 cam disks for the following tooth shapes: Curved tooth 28-161 Free-standing type tooth 28-51 curved tooth Connected load approx. 1.5 kW Net weight approx. 345 kg Technical data EMSL Band saw width 70 to 360mm Tooth pitch 20 to 100mm 2 cup wheels 80x40x20mm Tangential and radial angle 0° to 7° (free angle in cutting and feed direction) Connected load: 0.6 kW Net weight: 250 kg Both machines in track - synchronized with bandsaw support stands with illustrated extraction system Standard accessories and fully equipped with grinding wheels Complete documentation Year of manufacture 1985 - Self-drive with geared motor - Control panel with on/off for feed, on/off for grinding wheels and automatic mode - including band saw guide - 70 to 360mm blade width - Tooth pitch 20 - 100mm - Flank clearance angle radial & tangential 0-7° - 2 cup grinding wheels 80 x 40 x 20 mm - connected load: 1.2 kW - Weight: 390 kg The offered bandsaw blade sharpening machine type Vollmer Cana/SL is completely overhauled. The machine has been electrically and technically tested and is in first-class condition. The machine can be inspected at any time. The machines are in very good condition and have been stored in dry storage since 1998.

Condition: used, Year of construction: 2025, Band saw for metal, with optimal cutting range, commonly used in carpentry, production and craft facilities. Kdodewl Ea Topfx Acwjw Machine description Universal CORMAK BS 712 A band saw with CE marking is a trusted solution for metal cutting, unparalleled for years. Features high efficiency and easy handling. Makes it possible to cut in vertical plane and perpendicular to the cut material axis, or at any angle in 45°–90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between the hydraulic cylinder chambers. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Technical data Cutting band size 2360×27×0.9 mm Band tension mechanical (manual) Band speeds 22, 33, 45, 65 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Power supply 3-phase 400V Main motor power 1.1 kW Weight 190 kg Angle 0°.....180 mm....300×180 mm.....180×180 mm 45°.....130 mm....120×125 mm.....125×125 mm Machine construction Cutting band transmission system is composed of two cast iron wheels. The first wheel is a tensioning wheel (adjusted with a lever) and the second one is a drive wheel. Torque from the worm gear is directly transmitted to the tensioning wheel, while the worm gear is driven by an electric motor. Appropriate band angle is ensured through a set of roller bearings. The base of the machine is a rigid cuboid made of steel sheets inside which is a cooling fluid container with a flood coolant pump. Due to swivel vice it is possible to cut material at 0°–45° angles. Tank for flood coolant draining and a container for chips are fixed to the upper part of the machine. Cast iron workbench is attached to the tank, which in turn is equipped with a vice for material clamping and to which the arm of the band saw is fixed. In the lower part of the machine base are holes for wheel axles. Safety during cutting process is ensured by an electric installation meeting all CE requirements. The machine is equipped with a limiting switch that stops the machine after cutting process is finished, an emergency button, a number of microswitches that switch the machine off when, e.g., the belt transmission guard or cutting band guard are opened. Additionally, our machine, as opposed to competitors, is equipped with a wire brush for band cleaning – it prevents the blade from blocking and ensures a more effective cutting. WARNING ! 3 ITEMS AVAILABLE: 1. MACHINE IS RETURNED, SERVICED, ASSEMBLED (poz.519) 2. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER ,COMPLETE, ASSEMBLED (poz. 518) 3. MACHINE IS RETURNED, NO PACKAGING, DENTED MOTOR COVER AND BELT COVER, ASSEMBLED (poz. 517)

Condition: excellent (used), Year of construction: 2015, Saw blade Ø: 350 mm for pipes 90/45°: 120/110 mm for square tube 90/45°: 105/95 mm for profiles 45°: 105x105/80 or 110 x 80 mm for round material at 90/45°: 60/50 mm 2 saw blade speeds: 1400/2800 rpm Space requirement with original stand: 1050 x 600 x 1450 mm Weight: 162 kg Ksdpfx Acjxlg Icewedw

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Kdsdpjg U Uv Rofx Acwjw Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, functionality: fully functional, Year of construction: 2023, machine/vehicle number: SY390-156, control type: PLC-controlled, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Knuth, controller model: Knuth, number of rollers: 4, roller (bottom) diameter: 360 mm, roller (top) diameter: 390 mm, side roll diameter: 300 mm, roller length: 2,600 mm, working width: 3,000 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, overall weight: 15,800 kg, total length: 5,470 mm, total width: 2,100 mm, total height: 1,985 mm, power: 22 kW (29.91 HP), input voltage: 380 V, number of digital displays: 1, Equipment: CE marking, cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, The machine is new and has never been used. List price is €114,300. It was purchased for a client who no longer wanted it. RBM 25/40 Hydraulic Plate Rolling Machine Standard Equipment: - 4 hardened rolls - Conical rolling device - Digital display for side rolls - Separate control panel - Operating manual Technical Description: - Heavy-duty frame with contemporary, rigid construction - Hydraulic clamping bearings for easy material feed - Roll movement, parallelism, and cone adjustment are all controlled from the operator panel - All rolls are induction-hardened and precisely mounted in high-quality bearings - Upper and lower rolls are powered by independent hydraulic motors - Hydraulic components supplied by Parker and Bosch - Electrical components supplied by Siemens and Telemecanique - Minimum bending diameter: 3 × upper roll diameter Technical Specifications: | Parameter | Unit | Value | |-----|-----|----- | | Working length | mm | 2,600 | | Max. plate thickness (at 240 N/mm²) | mm | 30 | | Max. pre-bending thickness | mm | 25 | | Number of rolls | pcs | 4 | | Upper roll diameter | mm | Ø 390 | | Lower roll diameter | mm | Ø 360 | | Side roll diameter | mm | Ø 300 | | Main motor power | kW | 22 | | Machine dimensions (L × W × H) | mm | 5,500 × 2,100 × 2,000| Kjdpfsxdcxbsx Acwedw | Net weight | kg | 15,800 |

Condition: new, Panel Saw ALTENDORF F 35 Type 3 - 1000 -Exhibition Machine- 5.5 kW (7.5 HP), 3 speeds, Motorized height and tilt adjustment, Large protective hood, Kdjdpfxow Impts Acwow Double roller carriage 3,200 mm, Scoring unit with LED lighting, CNC rip fence, cutting width 1,000 mm, Angle-mitre fence 3,450 mm, without length compensation, Table extension/table widening, High-quality CDF surface ----- Technical Specifications ----- Tilting range: 0 - 46°, Carriage length: 3,200 mm, Cutting length: 3,100 mm, Cutting width: 1,000 mm, Cutting height: 154 mm, Max. saw blade Ø: 450 mm, Motor power: 5.5 kW, Screen size: 15 inch, Table height: 910 mm, Extraction port Ø: 80 + 120 mm - New exhibition machine -

Year of construction: 2007, condition: ready for operation (used), Additional Equipment 1 piece 3-colour light Additional device for inserting the tamper and pressing bars Automatic door for loading station This SFT TBM 3-1500 drilling machine was manufactured in 2007. If you are looking to get high-quality drilling capabilities, consider the SFT TBM 3-1500 machine we have for sale. Contact us for more information. Application Types Other Machine Tools Kdodpoxirhcsfx Acwjw

Condition: used, - Cutting range 450 x 450 mm - Semi-automatic - Minimum quantity lubrication - Mitre adjustment left and right with digital display - Incl. roller conveyor 6 m on feed side (3 m powered) - Discharge side 5 m with material stop - Well-maintained condition - Saw drive 2.2 kW - Year of manufacture 1997 - Saw blade dimensions 4150 x 34 x 1.1 Kdodjxdvmrepfx Acwjw

Condition: good (used), Metal band saw, fully automatic, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine, automatic band saw, metal band saw machine Ksdpfx Aehwxb Tocwjdw -Manufacturer: Pehaka, horizontal band saw automatic band saw -Drive: 0.8 kW -Cutting data flat: 320 x 150 mm -Cutting data square: 150 mm -Saw blade speed: continuously adjustable, 20 - 195 m/min -Saw band: approx. 3700 mm -Coolant system -Dimensions: 1800/940/H1310 mm -Weight: 528 kg

Condition: new, Year of construction: 2025, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed Item number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Weight (net) approx. 185 kg Max. width/depth (product) approx. 985 mm Max. height (product) approx. 1700 mm Electrical data Drive motor power: 1.5 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Cutting ranges Cutting range 0° round (solid material) 225 mm Cutting range 0° square (solid material) 190 mm Cutting range 0° rectangular horizontal (solid material) 150 x 245 mm Cutting range +45° round (solid material) 145 mm Cutting range +45° square (solid material) 150 mm Kdodpsgx T I Uefx Acwow Cutting range +45° rectangular horizontal (solid material) 190 x 150 mm Cutting range +60° round (solid material) 90 mm Cutting range +60° square (solid material) 90 mm Cutting range +60° rectangular horizontal (solid material) 120 x 90 mm Explanation of cutting range: Cutting range determined based on the weight of the saw frame with aluminum. May vary depending on the material used and may be smaller (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: From stock 54634 Bitburg - available immediately -

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 145200 € 2744.28 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen Kjdewir Daspfx Acwodw 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Year of construction: 1996, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC 426 Controller Brand Heidenhain Model TNC 426 P Main Drive Spindle speed range 0 – 2500 Tool taper ISO 50 Kjdpfx Asxfculecwjdw Number of axis 5 Movement X-Axis Movement 3500 mm Y-Axis Movement 2000 mm Z-Axis Movement 1250 mm W-Axis Movement 800 mm Workpiece Workpiece weight 12000 kg This 5-axis TOS WHN 13.8 boring machine was manufactured in 1996. It features a working spindle diameter of 130 mm, X-axis travel of 3500 mm, Y-axis travel of 2000 mm, and a Z-axis travel of 1250 mm. The rotary table clamping surface measures 2200 x 1800 mm, supporting a maximum workpiece weight of 12,000 kg. If you are looking to get high-quality boring capabilities, consider the TOS WHN 13.8 machine we have for sale. Contact us for more information. Application Types Other Machine Tools

Condition: used, Year of construction: 2023, gebraucht 2023 5542 prompt, Zwischenverkauf v Italien 11600 € 1 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm Kedpfx Aswiryhscwjdw 1450 mm 300 kg Demo machine / mint condition Net price (price for new machine € 13.600,00) Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.