Used Mitre Saw Machine for sale (68,278)

Condition: good (used), Year of construction: 2019, machine/vehicle number: 562670-08-C, Offer 25488 Technical Data: - Band saw blade dimensions: 3320 x 27.0 x 0.9 mm - Infinitely variable cutting speeds: 15 – 100 m/min - Hydraulic material vice - Mitre adjustable left up to 60°, right up to 45° - Cutting capacity at 90°: - Round: 280 mm - Square: 260 mm - Flat: 330 x 260 mm - Cutting capacity at 45° left & right: - Round: 250 mm - 45° left, flat: 270 x 200 mm - 60° left, flat: 170 x 170 mm - Drive: 400 V / 2.2 kW - Coolant system - Chip brush Fpsdpfxjy E Hv As Af Asg - Weight: approx. 1300 kg - Space requirement: approx. W 1800 x H 1900 x D 1950 mm

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Fpsdpfx Afodzp T Dj Asg Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: good (used), Year of construction: 1995, machine/vehicle number: 40105, Offer 26053 Technical Data: - Saw blade diameter: 550 mm - Max. cutting length: 6000 mm - Minimum cutting length at 90° + 45°: 350 mm - Cutting area, e.g. 90°: 110 x 390 mm - or as per diagram Fpjdpsyiz Hcjfx Af Aeg - Swivel range inward, pneumatically: 90° - 45° - Tilt range inward, pneumatically: 90° - 45° - Saw blade speed: 2800 rpm - Drive: 380 V / 2 x 4000 W - Space required approx.: W 7660 x H 1600 x D 1400 mm - Weight approx.: 2100 kg - With: adjustable cutting length and angle, - separate control cabinet, automatic spray unit, - integrated roller conveyor,

Condition: good (used), Year of construction: 1999, machine/vehicle number: 6410/102/051, Offer 25325 Technical Data: - Cutting capacity at 90° - round: 320 mm - flat: Width 500 x Height 300 mm - Mitre adjustment – right & left up to 60° - Cutting capacity at 45° – left & right: 320 mm - flat: 304 x 300 mm - Material support height approx. 750 mm - Saw blade dimensions: 5090 x 34 x 1.1 mm - Cutting speed infinitely adjustable: 17 to 90 m/min - Cutting pressure infinitely adjustable: 0 – 10 m/min - Total drive power: 400 V / 4.0 kW - Motorised chip removal brush - Hydraulic lifting/lowering of the saw frame - Hydraulically operated movable workpiece vice - Hydraulic mitre adjustment with digital angle display - Swarf conveyor - Motorised infeed roller conveyor KASTO, 10 m - Outfeed roller conveyor KASTO with length stop, 6 m Fpedexph E Rjpfx Af Aeg - Required space approx.: W 1300 x H 1400 x D 3100 mm - Machine weight approx.: 1800 kg - Roller conveyor weight approx.: 3500 kg

Condition: good (used), Year of construction: 1998, functionality: fully functional, total length: 2,680 mm, total width: 2,350 mm, total height: 1,350 mm, type of input current: AC, overall weight: 1,800 kg, cutting range round steel at 45°: 300 mm, cutting range round steel at 90°: 325 mm, saw band length: 4,400 mm, saw band width: 34 mm, working height: 750 mm, cutting speed: 150 mm/min, height adjustment type: hydraulic, Technical data: Clamping range bundle tension: Width: 0 - 300 mm Height: 5 - 300 mm Material insertion: Single 0 - 600 mm Multiple 0 - 9999 mm Remaining piece length: Manual: approx. 70 mm Automatic: approx.: 300 mm Cutting speed: 15 to 150 m/min - AC drive Cutting pressure: infinitely variable hydraulic Lowering speed: 0 to 300 mm/min - infinitely variable Saw blade dimensions: 4400 x 34 x 1.1 mm Saw blade tension: With torque wrench Weight of the machine: approx. 1800 kg (net) Machine dimensions: Length x width x height approx. 2680 x 2350 x 1350 mm Max. Support weight: Material weight max. 250Kg/m Working height: 750 mm With support elements approx. 800 mm (optional) Noise emission: 74 dB(A) Fsdpjq Atyzjfx Af Aopg Measured at the operator's workplace Including the two roller conveyors shown.

Year of construction: 2007, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1340020469, Mitre Saw Machine AKS 134/00 1 x Saw Blade Ø550mm 1 x Saw Blade Ø500mm Equipped with digital angle setting readout Fjdpfex A D Ihox Af Aopg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 9076, cutting height (max.): 160 mm, cutting width (max.): 450 mm, power: 15 kW (20.39 HP), TECHNICAL DETAILS Max. cutting width: 450 mm Max. cutting height: 160 mm Infeed table length: 8,200 mm Outfeed table length: 8,900 mm Max. infeed length: 8,000 mm MACHINE DETAILS Main motor power: 15 kW Power: 15.0 kW Control: Windows 10 Fuse: 63 A Dimensions & Weight Dimensions (L x W x H): 23,000 x 5,200 x 2,700 mm Weight: 8,000 kg EQUIPMENT Safety light curtain Safety fence Waste conveyor belt Label printer Marking pen Fsdpfx Aey Nx Eqef Aopg

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Fpedpfeyfnpiox Af Asg Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min

Condition: new, Year of construction: 2021, Technical Specifications – kappa 400 / x-motion: Saw blade diameter: 250–400 mm Cutting height: max. 133 mm (at 90 degree) Saw blade tilting: 0 – 45 degree Speeds: 3500 / 4500 / 5500 rpm Motor power: 5.5 kW (7.5 HP) Motor voltage: 3x 400 Motor frequency: 50 Hz Sliding table length: Standard 2500 mm Cutting width: 800 mm"X-Roll" system: (maintenance-free, roller bearing guidance) Control system: x-motion CNC control, 3-axis control Control panel: 5.7” (145 mm) TFT touch colour screen Features: Maintenance-free tilting segments: "Easy-Glide" Dust extraction port: Ø 120 mm (bottom) / Ø 80 mm (top) Weight: approx. 900 kgs Fedpfxsy Nc Dkj Af Ajpg The machine is in new condition and never has been used at all.

Condition: used, Year of construction: 2000, total power requirements: 2,2length of saw band: 3200cutting area width: 3200messurements (LxWxH): 2000 x 7000 x 1400weight approx.: 1500saw band dimension: 27 x 0,9Metal Bandsaw Bauer HS320GLZA Fedpfx Asy Nuhnof Ajpg Used horizontal metal bandsaw by Bauer, model HS320GLZA, year of manufacture 2000. The machine is equipped with automatic feed and is suitable for precise cutting of metal, pipes, and profiles in industrial and workshop use. Approx. dimensions: 200 x 700 x 140 cm.A roller conveyor system with a length of approx. [ 5000 mm] is included. The machine is used and located in our workshop. Viewing is possible on site. Location: 3071 Böheimkirchen, Neustiftgasse 34.

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X Fedpfx Afjxtbtps Aspg M64300 Front support roller M99008 Template holder

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste Fpedpfxodynpce Af Aeg -Coolant system -Manual

Condition: used, Year of construction: 1999, functionality: fully functional, Crosscut Saw, Mitre Saw OMS FC 350 R 2.2 kW – after technical inspection Specification: • Technical condition – used, after inspection • Manufacturer – OMS • Model – FC 350 R • Blade diameter – 350 mm • Saw motor – 2.2 kW • Max. dimensions of material cut at 90°: 120 x 150 mm (height x width) • Saw blade guards for operator safety • Dust extraction port – diameter 60 mm • Cutting angle adjustment +/- 45 degrees • Motor brake • Machine complies with CE standards and comes with documentation in Italian • Stops for repeat cutting to identical lengths • Year of manufacture: 1999 • Overall dimensions without tables: 80 x 75 x 70 cm (length x width x height) Additional Information: • The machine is in very good technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to start and test the machine on-site • Free operator training at the company headquarters • The auction price does not include VAT or shipping costs Fedpfxjy R Ev Ee Af Aepg Financing and transport: • We organize transport using the MDD fleet, courier companies, or external carriers • Financial support is available in the form of leasing or lease-back loans

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm Fpedpfx Aey Ruvbof Aeg 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: good (used), functionality: fully functional, Offered for sale: 1 used saw blade sharpening machine Manufacturer: Loroch Model: AK Blade diameter min/max: 80/710 mm Tooth pitch: 3-25 mm Grinding wheel diameter: 200 mm Drive motor: 0.55 kW Operating speed: 10-45 rpm Coolant system Fpsdpfx Afjy Nx Aps Ajg Weight: approx. 750 kg Inspection at our warehouse is possible.

Condition: used, functionality: fully functional, OMGA TR2A Double Mitre Saw for Wood and Aluminium – after technical inspection, ready for operation Specification: • Technical condition: used, after comprehensive maintenance • Manufacturer: OMGA Fedpfx Afjy Rh Dro Ajpg • Model: TR2A • Main motors: 2 x 1.65 kW (3,000 rpm) • Pneumatic head control • Max. cutting length: 312 cm • Min. cutting length: 10 cm • Max. cross-section at 90°: 80x145 mm • Max. blade diameter: 300 mm • Mitre cutting range: -45° to +45° (right, left) • 3 working modes • Vertical workpiece clamps • Extraction ports: 80 mm diameter • Weight: approx. 500 kg • Overall dimensions: 436 x 115 x 125 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos provided show the actual condition of the item for sale • Inspection and functional testing possible on-site • The listed price excludes VAT and transport costs Financing and transport: • Transport can be arranged via our own MDD fleet, couriers, or external carriers • Financing support available in the form of leasing or lease loans

Condition: used, Year of construction: 1996, Used machine Fpedpfx Ajxrhh Rof Aeg Year of manufacture: 1996 Equipment and technical data: Cutting length: 2800 mm Cutting width: 1300 mm Format cuts: 2800 x 2800 mm Vertical cutting height: 0–75 mm Cutting height at 45°: 0–53 mm Crosscut length with scale at mitre fence: 2800 mm Motor: 4 kW Speed: 4200 rpm Saw shaft: 30 mm Saw blade diameter min./max.: 300/315 mm Extension table: 540 mm Anodized design Tiltable up to 45° Digital tilt angle display Prepared for scoring unit Including mitre fence Including sliding carriage handle Dimensions: 2800 x 1600 x 1500 mm Weight: approx. 880 kg Availability: short notice Location: 63934 Röllbach

Condition: new, 0 3350 mm Working height bei 90° = 180 mm 0 45°/90°/45° 0 Fpedpfjy I Dclex Af Asg Cutting height at 45° 140 mm

Condition: new, mm Working height bei 90° = 315 mm 0 45°/90°/45° 0 weight 2050 kg Cutting height at 45° 230 mm Fjdpfjy I Dcfox Af Aopg

Condition: new, mm Working height bei 90° = 290 mm 0 45°/90°/45° 0 weight 1800 kg Cutting height at 45° 210 mm Fpedpfx Afsy I Db Ue Asg

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Fedpfoy Ni Ayjx Af Aspg

Condition: excellent (used), Individual machines are available for purchase—please contact us. VOLLMER CA200/CAL200 sawblades sharpening machines Key features: Fpedpeyzrcaofx Af Aog • 2 numerically controlled (CNC) axes • automatic sharpening • Technical condition: very good • Guides without play • New X and Y axis covers • Verified pusher assembly with new shock absorbers and actuators • Sharpener equipped with an automatic dressing wheel assembly • Individual exhaust system • Second pusher • Compatible with Vollmer N171 • Many spare parts and grinding wheels available VOLLMER N171 PRIMULTINI BC - TENSIONG MACHINE for tensiong and leveling of bandsawsaw blades PRIMULTINI BC - TENSIONG HEAD for tensiong and leveling of bandsawsaw blades

Condition: excellent (used), functionality: fully functional, blade diameter 300mm motor power 1,6HP - 1,16kW max cutting dimensions 100x135mm angle cutting +/- 45 degrees Fsdpfxsy N N Rke Af Aspg

Condition: new, Year of construction: 2025, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction connection: 100 mm Weight: 490 kg Fpsdpfx Afeiy Ry Ao Aog

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0721040674, saw blade diameter: 380 mm, Mitre saw elumatec MGS 72/10 for cutting aluminum profiles Pivoting range from 0° - 45°, continuously adjustable to the left and to the right Positive location points at 15°, 30°, and 45° Saw blade diameter 380 mm Saw blade speed 2,800 rpm Power supply 230/400 V, 3~, 50 Hz Power output 3 kW Length 780 mm, depth 900 mm, height 815 mm, weight 120 kg Stable, ground, continuous support table with turn table on precision bearings Wear-resistant and quiet multi-V belt drive Manual saw feed Pneumatic material clamping unit Pulsed coolant system The machine is ready fro operation Fpjdpsyxgynsfx Af Ajg