Used Sawing Machine for sale (65,444)

Condition: new, ALTENDORF F 35 Type 1 - 1000 Panel Saw Robust, powerful, high cutting height – ideal for solid wood! - New machine - available immediately - Motor power: 7.5 kW, 400 V, 50 Hz, 3 speeds Motorized height and tilt adjustment Large protective hood Double roller carriage 3,200 mm Scoring unit preparation Rip fence, cutting width 1,000 mm Angle and mitre fence 3,450 mm, without longitudinal compensation Table extension/widening: powder-coated surface Saw blade tilt: 0 - 46° Carriage length: 3,200 mm Cutting length: 3,100 mm Cutting width: 1,000 mm Cutting height: 154 mm Max. saw blade Ø: 450 mm Screen size: 15 inches Working table height: 910 mm Extraction port Ø: 80 + 120 mm Including options: M45102 Rip fence 1000 mm Digit_X Dksdpfx Afjxtbtpspjh M64300 Front support roller M99008 Template holder

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Djdsq Ii Dlspfx Afpjkh Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: excellent (used), For sale is a used Panhans V91 Twin II panel saw with a cutting length of 3200 mm. The machine is in very good condition and has been inspected by our qualified personnel. Technical specifications: - Double tilting saw unit - Cutting length: 3200 mm - Cutting width: 1250 mm - Cutting height: 173 mm - Max. saw blade diameter: 500 mm - Overhead control panel - Angle scale with length compensation - Motor power: 7.5 kW - Year of manufacture: 2012 Dkedjwza N Uspfx Afpeh The panel saw is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: saw, circular saw, panel saw, format Reference: R-S24F9

Condition: used, Kaltenbach saw, cutting machine, mitre saw, metalworking circular saw, used machine Manufacturer: KALTENBACH Model: KKS Machine No.: 21139 Electrical specifications: 400 V Dodpsyfnpiefx Afpokh Weight : 1200 kg aprox. Cutting speeds (blade peripheral speed): Z59 tooth count: • 1st gear: 17 m/min • 2nd gear: 34 m/min Z72 tooth count: • 1st gear: 14 m/min • 2nd gear: 28 m/min Z90 tooth count: • 1st gear: 11 m/min • 2nd gear: 22 m/min

Condition: used, Year of construction: 1974, Technical details: Djdewqplkopfx Afpokh total power requirement: 1,65 kW weight of the machine approx.: 620 kg Saw Blade Sharpening Machine Machine not complete - grinding spindle motor missing! for sale as spare part dispenser! *

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Dedpfx Aeu Niuhefpekh Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump *

Condition: used, Year of construction: 2015, saw blade diameter 350 mm Cutting capacity 90° (rectangle) 100 x 90 mm Cutting capacity 90° (square) 90 x 90 mm Cutting capacity 90° (round) Ø 95 mm Cutting capacity 45° (rectangle) 75 x 80 mm Cutting capacity 45° (square) 75 x 75 mm Cutting capacity 45° (round) Ø 90 mm Dkjdpsygx Dyefx Afpjh spindle turning speed range 38/19 U/min power capacity 1,5 / 0,75 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2001, Technical details: saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Dksdpfowvbk Ajx Afpsh Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: excellent (used), Year of construction: 2017, Very well-maintained Behringer VMS 400 A, including infeed and outfeed roller conveyors with Exactstop measuring unit. The machine is expected in stock at the end of February 2026. Dkedpfsygw E Aex Afpjh

Condition: used, Kölle Formatic Panel Saw - Year of manufacture: 1997 - 5.5 kW motor - 400 Volt - Weight: 1050 kg - Overhead control panel - 4 speeds - Electric lifting, lowering & tilting - Digital display for fence - Cutting width 1 m right of the blade - Brake motor Djdpfx Ajx Ha Rvefpekh - 2800 mm - Cutting height 145 mm without scorer

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Dkjdpsxta Dmjfx Afpeh

Condition: excellent (used), Year of construction: 2002, operating hours: 1,870 h, Tilting panel saw T 73 by Martin, equipped with 3-axis scorer and 3m sliding table Sliding table length: 3000 mm Saw blade tilting range: 0 to 46 degrees Speeds: 2800, 4000, and 5500 rpm with electronic speed display Drive motor: 5.5 kW with automatic motor brake Saw blade diameter up to 500 mm Maximum cutting height: 170 mm Cutting width up to 1100 mm, adjustable from the front via handwheel and manually movable Dsdpfx Aextvcxjfpekh Tilting angle and height electrically adjustable Crosscut fence with 2-point stop up to approx. 3350 mm Parallelogram cross table with digital angle display and roller Folding rip fence Extraction ports: 120 + 100 mm Sliding table can be locked in any position Handle Edging shoe 1 set of plastic saw blades with matching 3-axis scorer, freshly sharpened 3 riving knives 3-axis scorer unit, fully electrically adjustable while the machine is running 2 blade guards Miter fence for acute angles Tool compartment Emergency stop switch Operating manual CE marking The machine shows minor signs of use on the anodized sliding table. Small cuts on the sliding table have been repaired. Original paintwork, only touched up in a few places. Excellent condition as seen in the original photos. Dimensions approx. 3300 x 3750 x 1600 mm (LxWxH). Weight approx. 1950 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: ready for operation (used), functionality: fully functional, sliding table length 1500mm scoring unit Dsdsxhd Aiopfx Afpskh fence with angle regulation max blade diameter 300mm spindle diameter 35mm spindle speed 3/4.5/6/8 tys. RPM connection 380V

Condition: ready for operation (used), total height: 3,340 mm, total length: 4,500 mm, total width: 1,950 mm, throat depth: 660 mm, Type: ONL 660x700 ACN Heavy duty double column bandsaw specific for high-alloy steels CNC touch control with saw parameters for various types of high-alloy steels cap round: dia 660 mm cap square: 660 x 700 mm bundle cap: 555 x 700 mm autofeed with stroke of 500 mm (with unlimited repositioning) sawing power: 18,5 kW the in-feed and sawing speeds are frecquency controlled enlarged height of sawblade: 67 mm chipconveyor equipped with fully motorized Weisshaupt rollerconveyors: - 10,3 meter in-feed rollerconveyor (outside) with 2 hydraulic clamps for aligning workpiece - 9 meter in-feed rollerconveyor (inside) with 2 hydraulic clamps for aligning workpiece - max workpiece width: 900 mm - each roll is motorized - cap of one roll is 4 ton - 4 meter out-feed rollerconveyor: one rollerconveyor is equipped with scales to weigh workpiece after cutting (Sartorius system) Max height of workpiece: 700 mm Sawspeed: 10 > 120 m/min Length of band saw: 8660 x 67 x 1,6 mm Power needed: 27 kW (58 amp) Dkodpfjygywuex Afpeh Weight: 8,5 ton (only machine)

Condition: ready for operation (used), Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Capaciteit: 500 programma's Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang Dkjdsygywhjpfx Afpjh De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Luchttoevoer: 6 bar Afmetingen H x B x L: 1300 x 1300 x 1350 mm Gewicht: 580 kg

Condition: ready for operation (used), empty load weight: 900 kg, semi-automatic with hydraulic clamping same as Kaltenbach type KKS Dia saw / abrasive - disk: 425 mm Max dia workpiece at 90°: dia 140 mm Max dia workpiece at 45°: dia 140 mm Dkodjygyx Sspfx Afpjh Max dimensions workpiece at 90°: 300 x 60 mm / 140 x 140 mm Turningspeeds: 13 + 26 m/min Power needed / motorpower: 2,9 kW Angle-input system (mitre)(number+°): R : 60° - L : 90°

Condition: good (used), Alber sharpening machine for band saw blades saw blade width 50 - 206mm Dkedpfeglui Aex Afpoh tooth pitch 20 - 50mm

Condition: excellent (used), Fully automatic band saw graderOppligerType PBS 860 Doded Sr Sijpfx Afpekh

Condition: ready for operation (used), Year of construction: 1980, Band saw machine Make KÖLLE Type:ST 105 Year 1980 overhang 1050 mm with saw band - welding device IDEAL . Infinitely variable speeds. Dkjdomp Trwjpfx Afpsh Machine ready for use condition.

Condition: good (used), Year of construction: 1992, Automatic band saw JAESPA Type:W400 AZ Control Minipos 807 year 1992 Cutting diameter round material max. 400mm Sägebandlänge:5500X32X1,1mm Dedpfx Aogf H Sajfpskh Feed automatic cut length min.20mm Chip conveyor Total power requirement 4 Kw Weight approx.2500kg Accessories 2X saw blades, roller table 6m motor drive, machine documentation available. Footprint : 2,8X2,8X2m

Condition: good (used), Year of construction: 1998, Semi-automatic circular sawing machine Make KASTO Type:V350 U Year 1998 with mitre cut, roller conveyor and stop Saw blade dm.350mm Pneumatic vice and saw feed Stepless. Machine little used in good condition. Dkedpsfym Ewsfx Afpsh

Condition: used, Year of construction: 2022, Sliding table: 3200 mm, cutting width: 1000 mm, CNC parallel fence, scoring unit, angle stop with digital display, electro-motorically tiltable and height adjustable, control panel at eye level. Storage location: Nattheim. Dedpfx Asxqtvqsfpokh

Condition: excellent (used), Year of construction: 2005, saw blade diameter 360 / 400 / 425 mm cutting diameter 10 - 140 mm cutting speed 8 - 150 m/min required cooling water max. 40 l/min height of material-table 950 mm Dkedpfx Aevzt Eqefpsh max. travel between columns 680 mm control Siemens Simatic total power requirement 28 kW weight of the machine ca. 4,2 t dimensions of the machine ca. 2,8 x 1,8 x 2,2 m

Condition: excellent (used), Year of construction: 2021, For sale: Struers laboratory cut-off machine, model Discotom-100 FT 3x380-480V, year of manufacture 2021. The saw is in perfect condition, having operated for approximately 20 hours in our facility. Included in the set: a coolant tank with complete control equipment. Greater versatility and performance in one cut-off machine. Device description Discotom highlights: • OptiFeed – intelligent feed control • AxioWash* – automatic cleaning system • ExciCut – designed for cutting extremely hard materials • MultiCut – serial cutting (enabling multiple sample preparation) Dkodpfxsyfxfhj Afpeh • Method database • Cutting disc database The Discotom-10 and Discotom-100 are versatile benchtop cut-off machines, designed to economically expand your cutting capabilities and improve sample preparation processes. With a spacious and ergonomic design, both models offer exceptional flexibility for a wide range of clamping and cutting options for different sample types. This allows for efficient operation with less effort and minimal material deformation. Fast and precise State-of-the-art cutting technologies, such as intelligent speed adjustment, ensure exact and rapid cuts. Simply select the hardness of the material, and the machine automatically sets the optimal speed. Outstanding versatility If the disc becomes clogged with removed material, the user can select the automatic Direct Cutting mode with constant feed speed or the Impact Cutting mode. ExciCut manual mode is dedicated for separating harder and larger samples. The optional X-table automatic table unlocks the MultiCut function, allowing samples of identical or varying thickness to be cut precisely at specific positions. Time-saving operation The multifunctional rotary knob enables fast and easy setting of cutting parameters. Automatic speed setting not only saves time but also allows for using the same disc for various materials, eliminating the need for frequent disc changes. Swift switching between manual and automatic modes is supported by the motorized cutting arm lock, and a color display with icons provides a comprehensive overview of all essential information.

Condition: excellent (used), Catalogue number 7757 TECHNICAL DATA Milling machine - Spindle diameter: 25mm - Spindle height: 120mm - Interchangeable spindle, tiltable 20 degrees - Spindle locking - Height adjustable (up/down) - Original guide fence - Table dimensions: 1120x750mm - 4 spindle speed settings - Motor: 3.8 kW Circular saw - Max blade diameter: 350mm - Spindle axis: 30mm Dedpfx Afex Tgtdepskh - Blade adjustable (up/down and angle) - Spindle locking - Cutting width at fence: 540mm - Cast iron table - Dimensions (L/W/H): 1260x900x1000mm - Weight: 610kg ADVANTAGES – Made in Poland – DTR documentation available – Used milling machine, very good condition Net price: 6900 PLN Net price: 1640 EUR (based on exchange rate 4.2 EUR) (Prices may vary with exchange rate fluctuations)