Used Metalski Zavod Tito Skopje for sale (115)

Condition: excellent (used), Year of construction: 2013, Plate filter Sfoggia tech S50 Kdodpfx Ajq U Iq Teabeu

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Ksdpsm Ak Husfx Aabsdu Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 52,092 h, functionality: fully functional, machine/vehicle number: A0010A0169, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 1,270 mm, travel distance Y-axis: 1,270 mm, workpiece weight (max.): 75 kg, TECHNICAL DETAILS Working area X x Y: 1,270 x 1,270 mm Performance Max. sheet thickness: 6.4 mm Max. punching force: 180 kN Max. workpiece weight: 75 kg Speeds X-axis travel speed: 90 m/min Y-axis travel speed: 60 m/min Simultaneous travel speed (X + Y): 108 m/min Stroke frequency Punching frequency with 1 mm stroke: 900 rpm Punching frequency with 25 mm stroke: 420 rpm Marking frequency: 2,200 rpm C-axis: 3 rpm Tool system Linear magazine: 9 tools Number of tools with multi-tool (2 clamps): 9 to 90 tools Rotation of all tools: 360° Tool change time for single tool: approx. 3.5 s Multitool tool change time: approx. 0.9 s Max. punching diameter single stroke: 76 mm Max. punching diameter standard Multicut: 200 mm Part discharge Programmable parts flap – max. part size: 200 x 200 mm, sortable into 2 containers Control system Control type: TRUMPF CNC BOSCH Type 3 Workshop programming: ToPs 2000 MACHINE DETAILS Electrical connection: 400 V / 50 Hz Ksdpfx Aajwm Dcijbodu Connected load: 17 kVA Electrical power consumption approx.: 8 kW Compressed air connection: 6 bar Compressed air consumption: 3 Nm³/h Dimensions and weight Space requirement (including light barriers): 4,100 x 5,700 x 2,070 mm Machine weight approx.: 8,000 kg

Condition: new, total height: 3,300 mm, cutting width (max.): 1,200 mm, overall weight: 15,000 kg, power: 37 kW (50.31 HP), saw blade length: 7,750 mm, blade width: 160 mm, The PLUS are Mebor’s most advanced horizontal sawmills, with the latest innovations. PLUS band saws bring more production and speed, as well as versatility. The HTZ 1200 PLUS is performing with unmatched productivity in the price range. It is relied on by sawmills on all continents, from soft wood sawmills to quality oriented hardwood sawmills. Key features: • Fast return speed & servo controlled blade positioning, Kdodpfjricwqox Aabeu • Fast automatic control preventing operator delays, • High speed hydraulic log manoeuvring functions, • Precision made machine with top quality components. Mebor System® is our own system of horizontal band saws, which sets us apart from our competitors. With a Mebor band saw you will increase your productivity and yield, as well as decrease labour costs. Wood is unpredictable and for this reason Mebor band saws have a strong and robust construction. It guarantees reliability of functioning and minimises maintenance costs. Band saws adapted for your needs – for small and big sawmills.Every Mebor band saw is custom made ; therefore we supply each customer an optimal band saw for his needs. We will advise which model is most suitable for your needs and requirements. We will also adjust the configuration of the band saw; for example the distances between clamps according to the lengths of logs, equipment etc. Automatic board removing (Mebor System® ) We were the first to introduce the board removing system, which saves your time. After the band saw cuts a board, the board pusher pushes it off the band saw bed during the return of the band saw head. Simple and automatic, with no manual work. Automatic functioning - Mebor System®. It leads the operator during cutting. It provides important information, which helps him choose the optimal cutting for best output. Manual control is also available for less demanding users. Full log manoeuvring equipment is available for fast and effortless work. Precision of cutting is ensured by the solid construction and wide blades. All Mebor band saws are using wide blades (80-210 mm wide). The fact is that wide blades provide higher sawing speed, as well as better sawing precision. The high quality of your products will increase the satisfaction of your customers.

Condition: refurbished (used), Year of construction: 2014, operating hours: 35,418 h, functionality: fully functional, punching force: 18 t, sheet thickness (max.): 6 mm, feed length X-axis: 2,500 mm, feed length Y-axis: 1,250 mm, HIGHLIGHTS - Last maintenance in February - Punch head: stripper holder and seals replaced - Lower clamping piston replaced - C1K encoder and needle bearing renewed - All wear parts and maintenance items serviced TECHNICAL DETAILS Max. punching force: 180 kN Working area: 2,500 x 1,250 mm Max. sheet thickness: 6.4 mm Control: Bosch MTX CMP70 Tool system: 18 tool stations, with 2 clamps Part chute: 500 x 500 mm Hydraulic single tool holder: 360° rotation Programmable hold-down device: active / passive / re-track MACHINE DETAILS Operating hours: 35,418 h (28.02.2025) Space requirements: 6,500 x 6,000 x 2,230 mm Machine weight: 9,800 kg Total connected load: 18 kVA EQUIPMENT - Rigid, easily accessible C-frame - Linear magazine for tool stations - Foot switch for clamp closing - Servo-electric punching head - Punch lubricator (spray lubrication) - Punch slug extraction - Adjustable hold-down force - 17" touch screen - Teleservice via Internet - Automatic shutdown - USB interface - CE marking - Multi-beam safety light barriers - Hydraulic quick shut-off - Multitool function - Deburring and roller technology function Kjdpfjwu Evyox Aabedu - Thread forming function - Engraving tool function - Marking/fast bead forming function - Sensor for part chute - Vibration-dampened installation

Condition: good (used), Year of construction: 1998, Pivatic P60 The machine has a large number of punching tools and multitools (auto index station) with drawer cabinets and an additional punching bracket so that product changes can be made quickly, all of which is included in the scope of delivery. It is also equipped with an additional stacking station (homemade) so that the punched blanks Kdsdpsu Tw S Hefx Aabju can be stacked automatically.

Year of construction: 1980, operating hours: 36,000 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 11360, Looking for a reliable, cost-effective solution? This used extruder machine offers excellent performance at a fraction of the cost of a new model. Well-maintained and fully functional, it’s perfect for processing PVC. Ideal for manufacturers seeking to expand production without breaking the budget. Contact us now for more details! Ksdpfxsvuquve Aabjdu

Condition: used, Year of construction: 1984, functionality: unexamined, machine/vehicle number: B30157, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 450 mm, table length: 600 mm, table width: 380 mm, table load: 300 kg, spindle mount: MK 3, total height: 2,545 mm, total length: 1,700 mm, table height: 965 mm, total width: 1,330 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 900 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 2,500 rpm, drilling capacity: 30 mm, type of input current: three-phase, quill stroke: 140 mm, quill diameter: 85 mm, spindle diameter: 100 mm, spindle motor power: 8,200 W, workpiece weight (max.): 300 kg, rotary table diameter: 200 mm, Additional specs: Resolution: 0,001mm Max. capacity of boring: 220mm Ksdpfx Ajungrgoabedu Machine weight: 2500kg Additional equipment: - One rotating table with two rotating axis. - Collets, clamping elements miscellaneous, tool holders. - Documentation for machine

Condition: excellent (used), functionality: fully functional, maximum load weight: 2,500 kg, lifting height: 17,000 mm, Year of construction: 2022, operating hours: 2,000 h, This is a model in very good condition - operated by our operators. When buying from an exclusive distributor, you are sure of the quality of the purchased machine, warranty of spare parts and service. Possibility of arranging a presentation or rental. The most important information about the equipment: Kodpswnd Nljfx Aabsdu The M250 model is currently the most popular crane in Poland for the assembly of aluminum joinery above 10m. It stands out from the competition primarily for: - YAN-MAR diesel engine, more powerful than in the popular Maeda mini crane - fully hydraulically extendable JIB, immediately ready for operation - remote control as standard (brand - Scanreco used in the best machines in the world) - extendable tracks extending horizontally (in the models of competitors, the tracks extend sideways but the guides are at a 45-degree angle, which increases the height of the crane at maximum extension). - the strongest main mast search hook available on the market (2000 kg) - rigging mounted to the mast as needed. If a rope block is not needed (working on the search hook), the end of the rope is secured on the side of the main mast. - very compact design (all ropes and sensors hidden inside the mast) The advertisement concerns the BG Lift M250 Mini Crane with the following equipment: • 900 kg winch (65 m) • Electric motor (single-phase - 220 V) • Hydraulic jib • Search hook (for Jib) • Set of pulleys (single rigging) • Set of pulleys (triple rigging) • White tracks Number of operating hours on the combustion engine: 1575 Number of operating hours on the electric motor: 425, M250/1

Condition: excellent (used), Year of construction: 2006, punching force: 28 t, punching diameter: 105 mm, throat depth: 1,500 mm, Boschert TWIN 1500x2000 Rota-Index TRUMPF quick-change tool system Station 1: Rotation with index option for Boschert Multitool Max. punching diameter 105 mm. Tool continuously rotatable. Station 2: Max. punching diameter 105 mm with Boschert Multitool Revotool insert option. Incl. 8-way tool holder. Punching force: Yes, 280 kN (28 tons). Travel range x- 2050 mm (repositioning up to 9999 mm). Kdsdpfxswdmwqe Aabou Y- 1580 mm. Punching arm reach: 1750 mm. Tool system: Trumpf Gr1-3 (105 mm) and Boschert Revotool. Labod 32060 graphic control system / workshop programmable. Max. sheet thickness: 6 mm (clamp opening). Max. stroke height: 90 mm, continuously programmable up and down. Table width left + right: 2250 mm each Table depth: 3250 mm Table height: 900 mm Total width: 4900 mm Total depth: 4800 mm Total height: 2080 mm Drive power: 20 kVA Machine weight: 15,000 kg Hydraulic oil capacity: 160 l Color: Blue RAL5017/Light gray RAL7035 Machine built in 2006 Ball transfer table Slug extraction system Fast hydraulics Very well-maintained condition With accessories

Condition: new, Year of construction: 2025, Sandwich conveyors Do you need to transport bulk material vertically UP or DOWN? Or at an angle greater than 45 degrees? Or all of this at the same time? Is the elevator not suitable for you? For example, the MATERIAL IS TOO LARGE (+40 mm)? Does the material STICK and get stuck in the buckets? Or even permanently DAMAGE THE BUCKETS? SANDWICH-CONVEYORS are a KNOW-HOW, a NEW TYPE OF CONVEYOR, DEVOID OF THE SHORTCOMINGS of its competitors. Kdsdpfxswrt N Ne Aabou - conveyor capacity from 50 to 10,000 t/h. - conveyor length from 10 to 5000 m. - conveyor angle from 0 to 90 degrees. - material size from 0 to 500 mm. - conveyor belt can have a complex trajectory - turn up/down, right/left. - regular smooth conveyor belt is used - it is possible to transport sticky material and clean the belt well after unloading. Z-conveyors Z-conveyors have an almost infinite number of variations. The capacity, the route, the complete conveyor can be varied. The range of applications for these machines is also very wide. But, it is most relevant and expedient to apply such conveyors where: - the use of a high angle material lifting solution is advantageous; - a combination of transport sections at different angles to the horizon is required; - no possibility to install supports for the inclined part of the conveyor (supports only at the beginning and end of the conveyor) Conveyors of this type are an excellent tool for simplifying and optimizing the conveying chain. Contact us and we will help you to apply this solution correctly! - conveyor capacity from 100 to 2,000 t/h. - conveyor length from 5 to 500 m. - conveyor angle from 0 to 90 degrees. - material size from 0 to 100 mm.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 13,549 h, laser power: 3,200 W, punching force: 22 t, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 3 mm, workpiece weight (max.): 200 kg, TECHNICAL DETAILS Punching work area: 2,585 x 1,280 mm Laser working area: 3,085 x 1,370 mm Combined working area: 3,085 x 1,280 mm Control system: Siemens Sinumerik 840 D Laser power: 140 - 3,200 watts Wavelength: 10.6 µm Sheet thickness: 8 mm Cutting capacity mild steel: 8 mm Cutting capacity aluminum: 3 mm Cutting capacity stainless steel: 4 mm Workpiece weight: max. 200 kg Punching force: 220 kN Active hold-down device: 4.5 - 20 kN Linear magazine: 21 tools with 3 clamps Programmable chute: 500 x 500 mm C-axis punching: 60 rpm C-axis thread forming: 180 rpm Punching stroke sequence: 900 rpm Stroke sequence marking: 2800 1/min Compressed air connection: 7 ± 1 bar Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h MACHINE DETAILS Length: approx. 7.5 m Width: approx. 8.1 m Height: 2.4 m Weight: 16 tons Laser switch-on time: 49,949 h Cutting time: 13,549 h EQUIPMENT - Sturdy C-frame - 2 x clamping claws - Drives: Maintenance-free three-phase servomotors - Programmable hold-down device for repositioning - Sensor-monitored parts chutes 500 x 500 mm for punching and laser station, ejection cylinder on laser chute - 2 x good parts box - HI-LAS high-pressure cutting - Fast processing with SprintLas - ContourLas for producing small holes - Cutting gas pressure setting programmable - Laser cutting head: 5" lens, quick-change device, distance control APC - Lens monitoring sensor system - Additional cutting head with 7.5" lens - Punching head: hydr. mono tool holder, 360° rotation for all tools, automatic tool length compensation, tool spray lubrication, 2 x lubricant containers, punching slug extraction, chip bucket - Safety: multi-beam light barriers, quick shut-off hydraulics, extraction and compact dust protection device against stray radiation on the cutting head - TLF 3200 laser incl. 9" cutting head for stainless steel - AutoLas Plus - MultiTool function - MultiBend function - Thread forming function - Marking/quick beading function - Rolling technology function - Softpunch function - 1 x additional clamping claw - Chip conveyor with tilting container - Brush tables with loading and unloading aid - Blow-out device for small parts Ksdpovzrb Defx Aabodu - BNC network connection instead of RJ45 connection

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 47,000 h, laser power: 2,000 W, punching force: 76 t, workpiece weight (max.): 120 kg, working range: 2,500 mm, Equipment: cooling unit, safety light barrier, Special features: + Thread forming function with thread breakage detection + MultiTool function + Marking/Fast beading function + Repositioning cylinder + Sensor for part chute Standard features: - Stable C-frame - Coordinate guide with integrated linear magazine - 21 pockets for tools and clamps - 2 clamps - Drives: maintenance-free three-phase servo motors - Brush tables - TCF1 laser (2000W) - HI-LAS high-pressure cutting - Fast machining with SprintLas - Programmable Cutting gas selection/pressure adjustment - Laser cutting head with 5" lens - Cutting head quick-change device - APC capacitive height control - Lens monitoring sensors - Laser logbook function - Compact dust extractor - Rotating tool holder - Automatic repositioning device with hold-down clamp - Automatic part chute for parts 300x500 mm - Automatic tool changer with 19 stations - 2 clamps - Good parts container Kdedpfxswcq Hgo Aabju - Spray lubrication for punches - 2nd lubricant container - Punch slug extraction system - Chip bucket - Hydraulic quick shut-off system - External control panel - 15" TFT touch color screen - USB stick interface - 3.5" floppy disk drive - Safety features - RJ45 network connection - Network connection - Detailed operating instructions - Remote diagnostics system

Condition: used, Year of construction: 1968, functionality: unexamined, travel distance Z-axis: 950 mm, spindle speed (max.): 1,900 rpm, spindle speed (min.): 38 rpm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, table length: 1,000 mm, table width: 1,000 mm, table load: 2,000 kg, spindle mount: MK 5, total height: 3,500 mm, total length: 2,750 mm, table height: 850 mm, total width: 2,280 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, distance between stands: 1,575 mm, spindle diameter: 120 mm, spindle motor power: 11,000 W, spindle stroke: 300 mm, Additional techical specs: - Distance between pilars - 1575mm - Spindle speed: Nr.of gears: 18, Range 1:50: 18 to 1900 RPM, Stepup: 1,26 - Spindle feed: Drilling feed, nr. of gears: 15. Range: 0,03 to 0,8 mm/rev. Frictional feeds, nr.of gears: 3. Range: 2, 3 to 4 mm/rev. - Performance: Kjdpfxjunhd Re Aabodu Largest drilling diameter into solid material: 55mm for cast iron with feed: 0,6mm/rev. Largest drilling diameter approx.: 300mm Largest facing diameter: 620mm Largest cutting diameter (for steel,cast iron) approx.:120mm Largest milling-cross section (with table feed): 150mm2 at a milling feed of: for cast iron- 400mm/min, for steel: 200mm/min Power of drilling motor: 6 HP Power of lifting motor: 5 HP Connected load of the machine: 11kW Extras: coilets, tool holders, other additional equipment, documentation for machine

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 14,161 h, machine/vehicle number: A0110A0036, laser power: 2,000 W, punching force: 16 t, sheet thickness (max.): 4 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, space requirement length: 6,000 mm, space requirement width: 6,900 mm, TECHNICAL DETAILS Combined operation: 2,175 x 1,250 mm Laser operation: 2,500 x 1,250 mm Punching mode: 2,500 x 1,250 mm Outputs Maximum sheet thickness: 4 mm Maximum punching force: 165 kN Maximum workpiece weight: 120 kg Laser power: 2000 W Laser speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous: 108 m/min Kdedpfxjvgc Ape Aabju C-axis punching: 60 m/min C-axis thread forming: 180 m/min Punching stroke sequence: 600 1/min Stroke sequence marking: 1,300 1/min Tools Tool positions in the linear magazine: 19 (with 2 clamps) MultiTool capacity: 2 to 10-fold Number of tools in MultiTool: 19 to 190 Rotation of all tools: 360 Tool change time: 0.9 - 3.6 s Maximum punching diameter: 76.2 mm Maximum bending height (MultiBend): 25 mm Position accuracy Position deviation: ±0.1 mm Average position spread: ±0.03 mm MACHINE DETAILS Total weight: 12,500 kg Space requirement: 6,000 x 6,900 mm Connected load: 55 kVA Laser cutting time: 14,161 h Laser switch-on time: 63,575 h

Condition: new, Year of construction: 2025, 20T Premium Plus Ramp, usable internal width 20m. TM-GROUP – the best choice on the market. ⭐️ Galvanized grid on the ramp’s upper section as well! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 20 tons - Internal ramp width: 2000 cm - PREMIUM PLUS variant – galvanized grid also on the upper ramp section (highlighted in red in one of the last photos) - ELECTRIC and manual height control from 1m to 1.6m - Galvanized approach grid - Reinforced side railings on both sides - Solid rubber transport wheels - Central ramp handle allowing repositioning with a forklift - Adjustable tilt and flap height - Reinforced dual-sided ramp supports - Moving parts equipped with grease fittings - Ramp also equipped with a hand winch ✅ Approach Grid: Galvanized grating with anti-slip grooves. A secure and stable surface. Both forklift operation and foot traffic benefit from top-tier grip and solid support. Competitors mainly offer ramps with a metal sheet covered in mesh. Our product features a grooved grating, a much more durable solution. It prevents debris from staying on the ramp and ensures forklifts don't slip. ✅ Forklift Bracket – installable on both sides: Convenient and quick mounting for forklift transport in all directions. A specially designed bracket allows for maneuvering the ramp even in confined spaces. ✅ Chain for connection to TIR truck, railcar, or fixed warehouse ramp: A solid steel chain is another strong point of our ramp, preventing unwanted movement during loading operations. ✅ Durable Side Railings: Protective railing with an option to unscrew and mount a frame/roof (roof is optional). ✅ Electric Height Control: Smooth electro-hydraulic drive using a high-quality pump. Requires 230V, meaning it can be powered from a standard socket. ✅ Dual-Action Manual Pump: Hydraulic pump for height adjustment when electro-hydraulic power isn't available – dual-direction lifting. Perfect solution for uninterrupted operation in any conditions. ⭐️ Available variants include: ⭐️ - Approach widths: 1700 cm, 2000 cm, and 2500 cm in Standard, Premium, and Premium Plus versions - Mobile ramps with capacities of 10 tons, 15 tons, 20 tons, and 25 tons - Approach grid thickness: 3 – 5 cm - Colors: red, blue, black, and green (custom colors available upon request) - Mobile ramp with tarpaulin cover As a manufacturer, we can produce custom ramps tailored to specific needs – various sizes, load capacities, or features. Can't find exactly what you're looking for in the listings? Ask our specialist for a tailor-made solution. Tags: Kdodewb A Elspfx Aabju Loading ramp, unloading ramp, mobile ramp, mobile loading dock, loading bay, mobile transfer ramp, mobile loading ramp.

Condition: used, Year of construction: 1981, functionality: unexamined, machine/vehicle number: 2172, travel distance X-axis: 1,000 mm, travel distance Y-axis: 630 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 300 m/min, table length: 1,120 mm, table width: 630 mm, total length: 2,760 mm, table height: 2,800 mm, total width: 3,306 mm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, rapid traverse Z-axis: 1 m/min, drilling capacity: 30 mm, Dimensions of the working surfaces: - Maximum stroke of spindle - min.270mm - Spindle extension - 710mm - Distance from spindle end to working table - least 200mm greatest 750mm - Internal spindle cone acc.to GOST 15945-70 - metric 45 - Machine weight (without electrical equipment and accerssories) - 6890kg Table and skids: - Nr.of table slots - 7 - Securing the table and sleds - mechanical - Screen counting method - optic - Screen resolution value- 0,001mm Spindle: - Boring capacity: 250mm - The accuracy of processing a given size at a feed rate no more than 150mm/min - 0,2mm - Force allowed by the feed mechanism - 600kgs - Spindle RPM limits (within two gears): 1st gear- 32-400 RPM, 2nd gear - 160-2000 RPM - Maximum vertical mechanical displacement - 330mm Extras: coilets, tool holders, other additional equipment, documentation for machine Kodpsunrhaofx Aabodu

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 700002, punching force: 18 t, sheet thickness (max.): 6 mm, travel distance X-axis: 1,275 mm, travel distance Y-axis: 2,030 mm, punching diameter: 76 mm, table load: 75 kg, No reserve price - guaranteed sale at the highest bid - Attractive price due to lack of space for new machine! Submitting a bid obliges you to pick up the machine on time in week 3 - 2025 (January 13th, 2025 - January 18th, 2025). TECHNICAL DETAILS Working area Working area (X x Y): 1,275 x 1,280 mm Extended working area with additional tables: 1,275 x 2,030 mm Performance Max. sheet thickness: 6.4 mm Max. punching force: 180 kN Max. workpiece weight: 75 kg Max. clearance height: 38 mm Programmable hold-down force: 400 - 1,700 kN Speeds X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min Punching stroke sequence (step width 1 mm): 900 1/min Punching stroke sequence (step width 25 mm): 420 1/min Signing and fast beading stroke sequence: 2,200 1/min C-axis: 3 revolutions/s Tools Linear magazine: 9 tools Number when using multitool (2 clamps): 9 - 90 tools Rotation of all tools: 360° Tool change time Single tool: approx. 3.5 s Multitool: approx. 0.9 s Max. stand diameter single stroke: 76 mm Max. stand diameter standard multicut: 200 mm Programmable part chute Max. part size: 200 x 200 mm Sortable in: 2 containers Accuracy Position deviation: ± 0.1 mm Average position spread: ± 0.03 mm Kdodpovl E Tnofx Aabsu TRUMPF CNC control Base: Bosch Type3 Color monitor: 10.4" Hard disk storage: 300 MB for NC programs Floppy disk drive: 3.5" Platform: PC Pentium with Windows NT Workshop programming: ToPs 2000 Safety Safety light barrier system: Two-beam light barrier MACHINE DETAILS Electrical connection: 17 kVA Electrical energy: approx. 8 kW Pneumatic connection: 7-14 bar Compressed air consumption: 8 Nm³/h Dimensions and weights Space requirement (including light barrier): 410 x 5,700 mm Height: 2,255 mm Height with hood open: 2,505 mm Weight: 8,000 kg

Condition: new, Year of construction: 2025, 25T Premium Ramp, Usable Inner Width 2m – TM-GROUP, the Best Choice on the Market ⭐️ Galvanized Drive-On Grating! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP Kdodpfx Aaewbg Hgsbsu - Maximum Load Capacity: 25 tons - Ramp Inner Width: 2000 mm - Electric and Manual Height Adjustment: 1m – 1.6m - Galvanized Drive-On Grating - Reinforced Side Railings - Solid Rubber Transport Wheels - Central Forklift Hook for Easy Relocation - Adjustable Ramp Slope and Flap Height - Double-Sided Reinforced Supports - Movable Parts Equipped with Grease Nipples - Ramp Also Equipped with a Winch ✅ Drive-On Grating: Galvanized anti-slip grating with grooves. Provides a safe and secure surface. Forklifts and foot traffic benefit from maximum traction and stability. Competitors usually offer ramps with a sheet metal platform covered by mesh. Our product features the grooved grating, which is far more durable and allows dirt from forklift wheels to fall through, preventing slippage and buildup. ✅ Forklift Hook – Can Be Installed on Either Side: Convenient and quick forklift mounting allows for movement in all directions. The specially designed hook enables easy maneuvering even in tight spaces. ✅ Connecting Chain for TIR, Railway Wagon or Stationary Dock: A robust steel chain adds extra safety, preventing ramp movement during loading operations. ✅ Durable Side Railings: Protective railings with detachable options for installing a frame or canopy (canopy is optional). ✅ Electric Height Adjustment: Smooth electro-hydraulic lift powered by a high-grade pump. Requires only 230V – can be operated from a standard socket. ✅ Dual-Action Manual Pump: A hydraulic pump for height adjustment when power supply is unavailable – enables lifting from both directions. Ideal for all working conditions. ⭐️ Available Variants Include: ⭐️ Drive-on width: 1700 mm, 2000 mm, and 2500 mm – available in Standard, Premium, and Premium Plus. Load capacities: 10 tons, 15 tons, 20 tons, and 25 tons. Grating thickness: 3–5 cm. Colors: red, blue, black, and green (custom colors available upon request). Mobile ramps available with tarpaulin cover. As a manufacturer, we also offer custom-made ramps tailored to your specifications – in any dimensions, load capacity, or variant. Looking for a personalized solution you can’t find anywhere else? Contact our specialist today. Tags: Loading ramp, unloading ramp, loading dock, mobile ramp, dock ramp, mobile loading ramp, mobile unloading ramp.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 1404, total width: 1,690 mm, total length: 3,410 mm, total height: 1,915 mm, overall weight: 3,000 kg, TECHNICAL DATA Capacity - Height of centres: 125/175mm - Distance between centers: 400mm; 700mm; 1025mm - Max.travel of longitudinal slide: 400mm; 700mm; 1025mm Table - Table speed steplessly adjustable: 0.5 - 5.5 m/min. - Reversal dwell of table: 0-6 sec. - Minimum automatic stroke approx.: 1.5mm - Maximum swivel of table: 400 deg.- 12 ; 700 deg. -10; 1025 deg.- 8 - Travel per revolution of handwheel: 25mm Workhead - Swivel towards grinding wheel: 90 deg. - Spindle speed, steplessly variable: 30 - 675 RPM - Spindle nose taper: Morse 5 - Collet shank diameter: 25mm - Diameter of 3-jaw chuck: 160mm Wheelhead - Grinding wheel L.H. or R.H.: - Diameter (special exec. 6.25kW/8.4 HP): 400 (450) mm - Maximum width: 50 (80) mm - Bore: 127 (203) mm - Spindle speeds (3-step Vee-belt pulley) - Grinding wheel dia 400: 1500/1625/1800/2000/2200/2400 RPM - Grinding wheel dia 450 (8.4HP): 1340/1500/1625/1800/2000/2200 RPM - Grinding wheel motor approx.: 3kW - Grinding wheel motor, special for 450 dia wheel approx.: 6.25kW Kedpfoupiycsx Aabjdu - Rapid travel of wheelhead: - Hydr.approach and retraction: 40 mm - Additional adjustment with hand leveler: 210 mm - Swivel of the whole cross slide L.H. and R.H.: 45 deg. - Interminent feed, steplessly adjustable (on dia) at left or right hand table reversal, or both: 0.001 - 0.05 mm/sec. - Plunge feed, steplessly adjustable (on dia): 0.0002 - 0.1 mm/sec. - Maximum depth of plunge on dia: 1.7 mm Motor rating - Wheel spindle, standard: 3 kW - Wheel spindle special rating: 6.25 kW - Workhead: 0.55 kW - Hydraulics: 0.55 kW - Coolant pump, standard: 0.17 kW - Coolant pump, inteclon: 1.1 kW Workpiece weight - Maximum between centers: 80 kg Extras: grinding wheels, coilets, other additional equipment, user manuals

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Gap, bed and gap piece: - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: Kdedpjup A Rzsfx Aabou - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 370 mm, travel distance Z-axis: 335 mm, rapid traverse X-axis: 5 m/min, rapid traverse Y-axis: 5 m/min, table width: 420 mm, table length: 1,200 mm, spindle mount: MK 4, total height: 2,310 mm, total width: 1,900 mm, total length: 2,650 mm, type of input current: three-phase, rotational speed (max.): 4,000 rpm, rotational speed (min.): 40 rpm, workpiece weight (max.): 405 kg, quill travel distance: 150 mm, power: 6 kW (8.16 HP), Equipment: rotational speed infinitely variable, Type control: Heidenhein 150 System resolution: 0,001 mm Kdjdpfx Aeunhy Ssabeu Documentation for machine

Condition: repair required (used), Year of construction: 1983, functionality: limited functionality, total height: 2,650 mm, total width: 3,640 mm, total length: 4,620 mm, overall weight: 6,800 kg, Technical details: X-axis travel: 1000 mm Y-axis travel: 560 mm Z-axis travel: 800 mm Rapid traverse: 6 m/min Working feed: 1- 400 mm/min. Rotary axis resolution (degrees): 0,001 Control unit: Philips 432 Spindle revolutions: 20-2000 RPM Spindle stroke: 125mm Spindle taper: ISO 50 Spindle power: 15kW Feed force axis X and Z: 8000N Feed force axis X and Z: 24000N Table size 1250 x 800 mm Table load: 800kg Programing resolution: 0,001mm Documentation for machine Ksdpfx Aasunwd Tobedu Note: Defect electronic card should be replaced. The machine is mechanicaly in excellent condition, and could easily be retrofitted with modern CNC controls.

Condition: used, Year of construction: 1983, functionality: unexamined, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm - Max.spray volume: 5 dm3 - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar Kodpfx Aaeupy Abobsdu - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 - Tank: 140 l

Condition: used, Year of construction: 1987, functionality: unexamined, machine/vehicle number: F310Y, total height: 3,210 mm, total length: 4,640 mm, total width: 3,340 mm, Technical details: - Spindle diameter (axially fixed): 120mm - Variable spindle speeds: Range 1 - 10 to 465 RPM, Range 2 - 45 to 2150 RPM - Nominal power at the spindle: 8kW (temporary overload permissible up to 11kW) - Nominal torque at the spindle: 98 kpm (temporary overload permissible up to 134kmp) - Max absorbed power: 25kW - Dimensions of the standard tableL 840 x 1000mm - Max recommended load: 1200kg - Table rotation in both directions: continious through 360 degrees - Transverse stroke of the table (X axis): 900 (+20) mm - Longitudinal stroke of the table (Z axis): standard Z - 760 (+20)mm, increased Z - 975mm (+20 outside the graduation) - Min.and max. distance spindle flange/table centre (without spindle adaptor): standard Z - 430/1190 (+20)mm, increased Z - 455/1430 mm (+20 outside the graduation) - Vertical stroke of the headstock (Y axis), min. and max. height of the spindle axis above the table: standard Y - 50-710 (+20)mm, increased Y - 50-960 (+20)mm - Hydraulic infinitely variable working feeds in manual mode - 6 to 630mm/min - Rapid traverse - 6m/min - Precision of optical reading: linear axes - 0,001mm, manual rotary axis - 1 sec.arc - Positioning accuracy refered to built-in master scales +/- 0.0015mm; +/- 2 sec.arc - Weight of the machine: 12 t Kodpfx Ajun Siwjabedu Extras: Includes various tool holders, rotating table, user manuals