Used Metering Pump for sale (11,628)

Condition: used, Technical details: tank capacity: 4,2 l filter: Inhalt/volume ca. 8,0 l REFUELING PUMP; GASOLINE PUMP WITH ENGINE; FUEL PUMP Gedpfx Ansu Nzwhozjbn Comes from military stock. The pump is gasoline powered. It refuels fuel into fuel tanks e.g. car; truck. Mix gasoline with two-stroke engine oil in the ratio 25:1. There are 4 pieces of pumps for sale. With 2 nozzles! *

Condition: used, Year of construction: 1992, 2 KKSB submersible waste water pumps Both pumps = 7.5 kW Weight 164 kg Godpfxou N E Hts Anzsbn *

Condition: used, Technical details: tank capacity: - l overpressure : - bar motor: 1400 U/min total power requirement: 3,0 kW weight: 312 kg dimensions L x W x H: 1,05 x 0,67 x 1,94 m application use of hydraulic components operation pressure min/max.: 60/70 bar - nitrogen 54 bar - hydr. tank size L: 630 x W: 440 x H: 380mm with 100 Liter content Gsdpfxou N E Nhs Anzjbn *

Condition: used, Technical details: feed pressure: 60 bar drive power: 22 kW liter capacity: siehe Typenschild l feed pressure: 50 bar drive power: 11 kW 5 hydraulic power units for sale. Gbodpeu N Erijfx Anzen - 3 units with 60 bar and 22 kW (SA779/24 vane pump type PV2R3-66) - 2 units with 50 bar and 11 kW (SA 780/38) Prices vary according to aggregate size. *

Condition: used, Technical details: tank capacity: 800 l overpressure : zul./max.=ca.100 bar motor: 5 weight: ca. 2,4 t Hydraulic Pressure Storage Plant - aggregate= LxWxH=2,48x1,73x2,13m Gbodpfsu N Ervsx Anzen - oil tank :LxWxH=2,0x1,1x0,5m - 5 motors ( from 3,8 up to 66 kW) - coolant: nitrogen - 5 pumps iD. *

Condition: used, Year of construction: 2001, Technical details: pressure capacity: 145 bar charging voltage: 24 V / 12 V V weight: 185 kg dimensions L x W x H: 1,0 x 0,5 x 0,8 m Hydraulic pressure 145 bar Gbedpfx Aeu N E Hgenzon Input 230 v / AC Output 12 V / 200A or 24 v / 100A *

Condition: used, Technical details: tank capacity: 17 l motor: 1380 Flow rate: 2,54 l / min pressure capacity: : 340 und Pw: 310 bar total power requirement: ca. 1,5 kW weight: ca. 21 kg dimensions L x W x H: 0,5 x 0,2 x 0,6 m Gsdpfeu N E H Hex Anzsbn 4x directional valve 1x pressure relief valve 2x pressure switch 1x pressure gauge 2x bubble accumulator *

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Gbjdpjvvi Nnjfx Anzen

Condition: used, Year of construction: 1995, Storage location: Supplier Gbedpfevvi Sisx Anzsn

Condition: like new (used), volume flow: 3.6 m³/h, power: 0.18 kW (0.24 HP), input voltage: 415 V, input frequency: 60 Hz, type of input current: three-phase, rotational speed (max.): 3,483 rpm, protection type (IP code): IP54, Grundfos MTA60-180 A-W-A-B vacuum pump, year of manufacture unknown. Surplus from installation, unused. Voltage (50 Hz): 3~220-240D/380-415 V Voltage (60 Hz): 3~220-240D/380-440 V Rated current I₁n (50 Hz): 0.69/0.42 A Rated current I₁n (60 Hz): 0.99/0.63-0.57 A Maximum current Iₘₐₓ (50 Hz): 0.79/0.48 A Maximum current Iₘₐₓ (60 Hz): 1.14/0.72-0.66 A Input power P₁ (50 Hz): 200 W Input power P₁ (60 Hz): 330 W Speed n (50 Hz): 2932 min⁻¹ Speed n (60 Hz): 3438-3483 min⁻¹ Rated flow rate Qₙₒₘ (50 Hz): 50 l/min Rated flow rate Qₙₒₘ (60 Hz): 60 l/min Rated head Hₙₒₘ (50 Hz): 5.3 m Rated head Hₙₒₘ (60 Hz): 7.2 m Enclosure protection class IP: 54 Gsdpozbi Avofx Anzobn Insulation class: F Rated power P₂: 180 W Maximum fluid temperature: 60 °C Pipe connection: G 3/4 If you have any questions or need further information, please contact us via message or by phone.

Condition: new, Year of construction: 2016, Brinkmann TA404/420 pump Remaining from an installation, no longer needed. Type: TA404/420-65+003 Serial number: 0808013762-93880 003 Rated flow: 250 l/min Head: 27 m Godjzbix Repfx Anzebn Protection class: IP 55 Insulation class: F Power: 2.2 kW Current: 9.2/5.3 A Voltage (50 Hz): 220–240/380–420 V Speed (50 Hz): 2850 min⁻¹ Voltage (60 Hz): 255–277/440–480 V Speed (60 Hz): 3400 min⁻¹ Frequency: 50/60 Hz Standard: EN 60034 If you have any questions or need further information, please contact us via message or by phone.

Condition: ready for operation (used), Primutini bombing machine Gbedpfxswt Nxpo Anzen

Condition: used, Dear Sir or Madam, we hereby offer you a Grundfos TP 150-530/4 A-F-A-DBUE with Siemens 1LG6 253-4AA91-Z. Gsdjwv Nlhjpfx Anzjbn

Condition: used, overall weight: 575 kg, volume flow: 550 m³/h, power: 75 kW (101.97 HP), We offer for sale Grundfos pump Type TP 200-510/4 A-F-A-DBUE. Gbjdpfx Aswqnfvonzon The pump is used, in very good condition.

Condition: used, mileage: 1,87,000 km, power: 200 kW (271.92 HP), first registration: 03/2017, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, color: blue, gearing type: mechanical, Equipment: ABS, air conditioning, electronic stability program (ESP), Special equipment: Audio system: CD radio (Bluetooth), exhaust pipe directed to center of roadway, 165 Ah battery, rear axle differential lock, additional air reservoir, driver assistance system: brake assist (Active Brake Assist), driver assistance system: lane keeping assist, electric window lifters, 100 A alternator, manual transmission, communication interface, fuel tank: 180 L plastic, fuel tank: additional 100 L plastic, left side, enhanced engine brake, programmable special module, rotating beacon left/right, acoustic reverse warning (external warning signal), fleet management system interface, external sun visor, lateral underrun protection, toll system preparation Further equipment: Emission standard EURO 6, axle configuration: 4x2, front/start mirror, electrically adjustable exterior mirror, left, classic cockpit, steel air reservoir, two-step entry, cab: S ClassicSpace, cab variant: ClassicSpace, suspension: air/air, suspension: front springs 5.7 t, AdBlue tank: 25 L, manually operated lifting roof (steel), rear axle: crown wheel 390, 10.4 cm info display with secondary info, body/chassis: chassis, engine: 7.7 L – 200 kW inline 6-cylinder diesel (OM 936), engine compartment encapsulation, wheelbase: 4160 mm, disc brakes front and rear, seat upholstery: fabric, cab seats: fixed co-driver single seat, cab seats: standard comfort suspension driver's seat, rear fender splash protection, rear axle stabilizer, steel rims 7.50x19.5, tachograph / EC control device, automatic daytime running lights, fixed rear underrun protection, front underrun protection, immobilizer, permissible gross weight 15.00 t * Mercedes Benz Atego 1517 4x2 * VIN: WDB96702710038785 * Engine type: OM936LA 6-4 * kW: 200 * Euro 6 * Displacement: 7698 cc * Empty weight: 14,740 kg * Gross weight: 15,000 kg * Wheelbase: 4,160 mm * Vehicle length: 8,300 mm * Vehicle width: 2,550 mm * Vehicle height: 3,800 mm * Tires: 285/70 R 19.5 --- * Concrete pump * Pump brand: * Sermac 4ZR20 Gjdpfx Asxucu Dsnzobn * Serial number: 9113 * Oil pressure: 350 bar * Operating hours: approx. 2,300 * Pipe maximum length: 15.4 m * Pipe maximum height: 19.4 m * Pumpable with hose up to 500 m --- * Price on request * All information without guarantee Tel./WhatsApp:

Condition: used, mileage: 3,18,699 km, power: 235 kW (319.51 HP), first registration: 09/2006, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2026, color: blue, gearing type: semi-automatic, emission class: euro3, Equipment: ABS, air conditioning, * ABS * ASR (traction control) * On-board computer * Cruise control * Hill-start assist * Analog tachograph * Electric window regulators Gbsdpfew S Agpex Anzjn * Electrically adjustable mirrors * Mirror heating * Central locking * Roof hatch * Rear window * Longitudinal and transverse differentials locks * AP axles * Steel bumper * Air dryer * Air-suspended driver's seat * 16-speed * Suspension: leaf spring * Payload: 6,080 kg * Retarder: engine brake ----Body: Schwing concrete pump P 2023-110/75 RB, 4-section, Z-fold, 4 arms, distributor boom KVM 24-4 H (Vector), max. vertical reach 23.1 m, max. horizontal reach 19.5 m, max. depth reach 13 m, slewing range 370°, delivery line (pipe DN) 125, 3 m end hose, max. output 114 m³/h, max. delivery pressure 80 bar, radio remote control + cable remote, fully hydraulic 4-point outriggers, oil cooler, centralized lubrication, high-pressure water pump. Read operating hours: Pump 5,133 h, Boom 6,369 h, Water pump 555 h, HP-pump 45 h, Agitator 9,820 h, Vibrator 581 h----Low folding height (under 5 m), also ideal for indoor operation! Sale to commercial customers only. FOR EXPORT SALES, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION SUBJECT TO CHANGE, ESPECIALLY EQUIPMENT AND ACCESSORIES. All contracts for sale, invoices, pro forma invoices, orders, and sales discussions are subject to our general terms and conditions (see legal notice/imprint).

Condition: good (used), Item: D-1903-Grundfos pump CR8-30 Water pump, Grundfos, used! Type P2-140 K Capacity 2.000 l, 90 m. Gjdpfxsirfble Anzjbn 1,1 kW

Condition: excellent (used), functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2024, operating hours: 25 h, machine/vehicle number: 24168, The inoCOMB Cabrio small silo is used for mixing and conveying pumpable (mineral or organic) materials with a grain size of up to approx. 8 mm. Pre-mixed render mortar, dry mortar, screed material, or floor leveling compounds supplied by the material manufacturer can be processed. The material container of the small silo can be filled with bagged goods, one-way containers, or big bags as required. During operation, the dry material is conveyed from the material hopper into the mixing tube via the dosing screw. In the mixing tube, the dry material—while water is added—is mixed by the mixing shaft into a homogeneous, pasty or liquid product. At the outer end of the mixing tube, the mixed material is discharged directly into the pump hopper. In the pump hopper, the material is conveyed via the pump shaft to the pump unit (rotor/stator). From there, the material is pumped through material hoses to the application site. Gbedpfeyk Twpox Anzon

Condition: used, PUMP, Alfa Laval Type MR-200A Godpfx Anoyv Ey Uezsbn Q – 35 m³/h Pressure 14 mwc Self-priming pump

Condition: new, Year of construction: 2026, power: 55 kW (74.78 HP), pressing force: 1,250 t, stroke length: 510 mm, operating speed: 6 mm/s, reverse speed: 55 mm/s, throat depth: 810 mm, clearance between the columns: 7,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 1250 Ton 8.1 Meter CNC Press Brake – New / 12-Month Warranty Press brake machines are heavy-duty industrial equipment used for the precise, repeatable, and controlled bending of large sheet metals. The 1250 Ton CNC Press Brake by CRONOSSTECH is specifically engineered for heavy steel construction, energy sector applications, and large-scale industrial projects, offering an impressive 8100 mm bending length and high tonnage capacity. Key Advantages - High-precision bending up to 8.1 meters - 1250 ton maximum bending force - Advanced automation with ESA S840W CNC control - Servo-motorized X+R axis precision backgauge - WILA motorized crowning system for uniform bending - Heavy-duty, high-strength frame construction Typical Applications - Heavy steel structures - Energy and infrastructure projects - Shipbuilding and shipyard industry - Defense and heavy machinery manufacturing - Large sheet metal bending operations Standard Features - ESA S840W CNC control unit (3–8 axis) - 15.6” touchscreen, 2D graphic, and offline programming software - Automatic bending sequence and collision prevention - Angle measurement and automatic crowning correction - Servo-motorized X + R axis backgauge system - High-precision linear guideways and ball screw system - 2 rear backgauge fingers (3-stage) - Promecam quick tool clamping system (E20) - Eurostamp standard punch and die set - D-Series full enclosure safety system - Double foot pedal control (up / down) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic system, Parker pump - LED lighting and energy-saving mode - Heavy-duty front support arms - WILA motorized crowning system Technical Specifications - Bending Capacity: 1250 Tons - Bending Length: 8100 mm - Distance Between Uprights: 7100 mm - Stroke: 510 mm - Daylight Opening: 775 mm - Throat Depth: 810 mm - Table Height: 750 mm - Pit Depth: 2375 mm - Machine Dimensions (LxWxH): 10600 x 3650 x 4500 mm - Approach Speed: 70 mm/sec - Bending Speed: 6 mm/sec - Return Speed: 55 mm/sec - Oil Tank Capacity: 1000 L - Motor Power: 55 kW - Weight: 136,000 kg Optional Features - Advanced multi-axis backgauge systems (4–6–8 axes) - WILA hydraulic tool clamping systems - Hydraulic punch clamping for rollers - Extended table for Multi-Vee dies - 1000 mm X-axis stroke - AKAS / DSP laser safety systems - Additional backgauge fingers General Information - Country of Manufacture: Turkey - Warranty: 12 months - Condition: New and unused Gbedpfx Aneyzb Hnozon This machine is manufactured in Turkey by CRONOSSTECH.

Condition: new, Year of construction: 2026, power: 22 kW (29.91 HP), pressing force: 320 t, stroke length: 310 mm, operating speed: 9 mm/s, reverse speed: 110 mm/s, throat depth: 410 mm, clearance between the columns: 5,100 mm, Equipment: CE marking, documentation/manual, safety light barrier, 320 Ton 6 Meter CNC Press Brake – HPB C320-6100 – New / 12 Month Warranty Press brakes are essential production equipment that provide high precision, repeatability, and manufacturing efficiency in sheet metal bending operations. The HPB C320-6100 CNC Press Brake, manufactured by CRONOSSTECH, has a 320 ton bending capacity and a 6100 mm bending length, developed for precise and stable processing of large-scale sheets. Key Advantages - High-precision bending over 6 meters length - Advanced programming with ESA S840 CNC control unit - High-precision servo motorized backgauge system - Homogeneous bending with WILA crowning system - Heavy-duty frame and high stability - European origin hydraulic and electrical components Applications Gsdpfsyzb Ewex Anzsbn - Large-scale sheet metal bending applications - Steel structure manufacturing - Energy and infrastructure projects - Machinery and equipment production - Industrial manufacturing lines Standard Features - ESA S840 (3-6 axis) CNC control unit - 15.6” touchscreen, 2D graphics, and offline software - Automatic bending sequence and collision control - Angle measurement and automatic angle correction (crowning) - CRONOSS X+R axis servo motorized backgauge (±0.03 mm accuracy) - Hardened linear guide and ball screw system - 2 adjustable backgauge fingers - Promecam quick tool clamping system - Eurostamp standard punch & die set - Full protective enclosure (full cover) - Dual pedal (up/down control) - GIVI linear scale (encoder) system - Schneider / Siemens electrical components - Hoerbiger (HAWE) hydraulic block, Eckerle pump - LED lighting, energy-saving mode - Front support arms (high-strength, adjustable) - Manual WILA crowning system Technical Specifications – HPB C320-6100 - Bending Capacity: 320 Ton - Bending Length: 6100 mm - Distance Between Columns: 5100 mm - Stroke: 310 mm - Daylight: 535 mm - Throat Depth: 410 mm - Table Height: 1065 mm - Machine Dimensions (LxWxH): 8150 x 2655 x 3170 mm - Approach Speed: 150 mm/s - Bending Speed: 9 mm/s - Return Speed: 110 mm/s - Oil Tank: 290 L - Motor Power: 22 kW - Weight: 27,000 kg General Information - Place of Manufacture: Turkey - Warranty: 12 Months - Condition: New and unused This machine is manufactured by CRONOSSTECH in Turkey.

Condition: not inspected (used), functionality: unexamined, NC-125 diesel injection pump test bench in used condition. This is a classic mechanical test stand designed for testing and calibrating diesel fuel injection pumps and injectors. Unit features a rotating pump mount, multiple high-pressure test lines, analog gauges, and manual control panel. Ideal for diesel repair shops, agricultural equipment service, or restoration projects. Machine shows signs of normal use (oil, wear, aging components) but appears complete. _____ Specifications (typical for this type) • Model: NC-125 • Type: Diesel injection pump test bench • Operation: Mechanical / analog • Applications: Inline injection pumps Gbjdjyx Sihjpfx Anzjn Rotary/distributor pumps • Includes: High-pressure lines Gauge cluster Pump mounting platform _____ Condition • Used / untested • Cosmetic wear, oil residue • Sold as-is

Condition: used, Manufacturer: Grundfos -type: LP 80 125/124 B-F-A-RUUV -model: 48/62941-P1-0250 -volume flow: 50m3/h Gjdpfoy R Edcex Anzjbn -lifting height: 15.5m -operating pressure: 16 bar -operating temperature: 80°c -stem size: DN80

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Depth: 930 mm Height: 730 mm Gbsdpfx Ajy R A Ulsnzsn Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Depth: 930 mm Height: 730 mm Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Operating pressure: Up to 350–400 bar Gsdpfx Asy R A Tusnzsbn Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.