Used Mikron Haas Vce 750 for sale (189)

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm Rjdpfxsub Amfo Aamen - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: good (used), Complete specifications can be found in the photos of the listing. CNC HEIDENHAIN 426. The machine is in excellent mechanical condition. Rodpexl Htfjfx Aamen

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Spindle Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 positions Tool holder: ISO-B40 Travel X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary swivel table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible load (with clamped swivel axis): 10,000 N Rotational speed of rotary axis: 12 rpm Swivel Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotational speed of rotary axis: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Rsdpfxew Hq Ifj Aamsn Weight: 7,500 kg Spindle hours: 6,191 h Machine runtime hours: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D probe Note: The tool holders visible in the images are included in the scope of sale and delivery. The tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the scope of sale and delivery. The drive for the head swivel axis is missing.

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm Rjdpe H I Hdofx Aamsn spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Condition: good (used), Condition: Used Rjdpfx Aasxlabiemjn Stock number: 968859 State: Good Maximum diameter: 100 mm (4") Maximum length: 100 mm (4") Number of teeth: 6-400 Maximum pitch in steel: 15 D.P. 12 indexing tables Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal cut or plunge cut Main motor: 1.5 HP Coolant pump motor: 0.1 HP Hydraulic system motor: 0.1 HP Dimensions: 1120x1120x1680 mm Machine weight: 500 kg

Condition: good (used), ⚙️ Mikron Gear Hobbing Machine Type 132-02 (M23) – Now available at our facility in Ireland: Mikron Gear Hobbing Machine Type 132-02 (M23) in very good condition. This precision Swiss-made machine is ideal for the production of small gears, toolrooms, and manufacturers seeking reliable, high-precision gear cutting capabilities. Mikron is renowned for its robust construction and long-lasting performance in gear hobbing applications, making it an outstanding solution for hobbing spur gears, helical gears, and splines with consistent accuracy. Condition: Used Stock number: 968859 State: Good Maximum diameter: 100mm (4") Maximum length: 100mm (4") Number of teeth: 6–400 Maximum pitch in steel: 15 D.P. 12 table revolutions Geometrically calibrated between 200 and 2,400 rpm Feed: Horizontal or plunge cutting Main motor: 1.5 HP Coolant pump motor: 0.1 HP Hydraulic system motor: 0.1 HP Dimensions: 1120 x 1120 x 1680 mm Machine weight: 500 kg Rodpfx Asxlabcsamon

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module Rjdpfx Ast Hw D Rsamjn total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm total power requirement 2,6 kW Rsdpeu U Sabjfx Aamen weight of the machine ca. 1,5t t

Condition: used, Year of construction: 1992, max. wheel diameter 150 mm gear width 300 mm max. module 4,5 Rodpfx Aaet Hwxbemsn min. module total power requirement 20 kW weight of the machine ca. 6 t dimensions of the machine ca. m

Condition: used, Year of construction: 1997, Technical details: x-travel: 710 mm y-travel: 630 mm z-travel: 500 mm turning speed range - spindle: 5 - 5000 1/min power - main spindle: 11 kW tool taper: SK 40 tool changer: 44 Werkzeuge feed: 10 m/min surface area: 1200 x 600 mm table load: 0,5 t total power requirement: 15 kVA weight of the machine ca.: 4,24 t Rodpfx Aevb Hzrsamen Toolchanger with 44 tools, pendant handwheel for easy setup. *

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 5.47.07.02, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 450 mm, rotational speed (max.): 6,300 rpm, number of slots in tool magazine: 44, TECHNICAL DETAILS Drive power at 44% duty cycle: 9 kW Rjdpfx Aaowm I N Hemen Drive power at 100% duty cycle: 6 kW Max. torque: 52 Nm Machining spindles (vertical and horizontal) Max. torque at the spindle at 44% duty cycle: 800 Nm Number of gear stages: 4 Speed range adjustable (vertical and horizontal): 10 – 6,300 rpm Tool holder / Pull stud: SK 40 / DIN 69871 Max. tool weight: 13 kg Tool diameter: 130 mm Pull force: 10,000 N Ejector force: 3,500 N Travel paths in automatic mode Longitudinal movement, spindle feed (X-axis): 600 mm Cross movement, spindle slide (Y-axis): 500 mm Vertical movement, spindle slide (Z-axis): 450 mm Feed drive (AC) Feed rate programmable X / Y axis: 0 – 15,000 mm/min Feed rate programmable Z axis: 0 – 12,000 mm/min Rapid traverse speed X-/Y-axis: 15,000 mm/min Rapid traverse speed Z-axis: 12,000 mm/min Coolant Coolant tank capacity: 150 l Flow rate: approx. 20 l/min Noise emission Sound power: 75 dB(A) Clamping table Table size: 530 × 900 mm Number of T-slots: 4 T-slot width: 14 H7 Table load capacity: 400 kg Tool changer TCD 44 Tool stations: 2 × 22 Tool diameter: 80 / 130 mm Tool length (max.): 350 mm Tool weight (max.): 6 kg Workpiece weight max. in drum magazine: 200 kg Chip-to-chip time: 20-25 s Tool change time: 12 - 16 s MACHINE DETAILS Total weight with protective enclosure: 3,000 kg Total weight with cabin roof: 3,100 kg Ambient conditions Max. permissible ambient temperature: 35 °C Max. permissible relative humidity: 75 % Electrical connection data Total installed nominal power: 15.8 kW Utilized and connection power: 12.3 kW Operating voltage and frequency: 3 × 400 V / 50 Hz

Condition: excellent (used), Year of construction: 1996, NEW ARRIVAL +++++ Rsdpfst I T N Ejx Aamon 1 used, very well-maintained MIKRON MULTISTAR CX 24 transfer machine / rotary transfer machine Machine can be inspected under power. Part setup is no problem. With MITSUBISHI AACPU-S1 control system - Machine Year of manufacture 1996 - Detailed technical data as per appendix - Machine can be inspected under power. Conversion - INSTALLATION - Setup - Application can be offered. Pricing: ex-site, unpacked, uninsured. Delivery time: immediately - subject to prior sale. Technical data is non-binding - errors excepted. Payment: As is customary for used machines, net before removal.

Condition: good (used), Year of construction: 1995, Machine is in good working condition. Control unit TNC 426 Rodjuzimnjpfx Aamon

Condition: repair required (used), Year of construction: 2003, Parts shown by hand not come. Rjdpfxsm Dtnre Aamsn Pallete changer EROWA not come.

Condition: used, Year of construction: 1981, x-travel 800 mm y-travel 500 mm z-travel 460 mm table surface area 1000 x 500 mm spindle taper SK 40 control HEIDENHAIN TNC 150 spindle turning speed range 31,5 - 3150 U/min feeds longditudinal/cross/vertical 1 - 3000 mm/min rapid traverse longitudinal and cross 6 m/min rapid traverse vertical 4 m/min Rodpfxjtqqple Aamen quill stroke 110 mm distance spindle nose and table max. 559 mm table load capacity max. 500 kg total power requirement 14 kW weight of the machine ca. 3,1 t dimensions of machine L x W x H 2,15 x 1,8 x 2,15 m Accessories: vertical head with hydr. tool clamping and quill retraction, solid table, coolant

Condition: used, Year of construction: 1998, x-travel 710 mm y-travel 630 mm z-travel 500 mm table surface area 1100 x 585 mm rotary table dia. 500 mm spindle taper SK 40 spindle turning speed range 5 - 6300 U/min spindle power 11 kW no. of tools in magazin 2 x 22 Rsdpfxjtz Sqho Aamsn control HEIDENHAIN, TNC 426 total power requirement 20 kW weight of the machine ca. 5,8 t Accessories: various tool holders, probe RENISHAW OMP 60, coolant

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Rsdpfow Hxzmsx Aamjn

Condition: used, Year of construction: 2007, Vertical CNC machining center MIKRON VCP 800 W With Heidenhain iTNC 530 contour control Year of manufacture: 2002 Rodow Iqh Hjpfx Aamsn Travel paths: X 800 Y 650 Z 500 Speed range: 0 - 14,000 rpm

Condition: used, control: Heidenhain TNC 155 tool taper: SK 40 Redpfx Asc Tt Hreamen quill stroke: 110 mm table size: 1000 x 500 mm travel: x-710, y-500, z-460 mm spindle speed: 31,5-3150 rpm accessories: angle table, coolant equipment, div. retainers

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KU 4165M, travel distance X-axis: 572 mm, travel distance Y-axis: 322 mm, travel distance Z-axis: 265 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 22, The value of the supplied spare parts is approximately €70,000. TECHNICAL DETAILS Redoxamh Eepfx Aamjn Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: Unlimited Remote Diagnosis: Available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: Parallel to main time, manual, with 3-axis handling or robot Parts Feeding: Paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-Axis: 1,000 rpm Rotational Speed C-Axis: 500 rpm Acceleration B-Axis: 52 rad/s² Acceleration C-Axis: 90 rad/s² Torque B-Axis clamped: 1,000 Nm Torque B-Axis unclamped: 287 Nm Torque C-Axis clamped: 300 Nm Torque C-Axis unclamped: 187 Nm Working Spindle Tool Interface: HSK 40-A External Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Activation: pneumatic, 6 bar Tool Changer Tool Discs: externally pre-loadable with position coding, diameter Ø 290 mm Tools (2 discs with 12 positions) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with free adjacent position: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. Total Tool Weight on Disc: 15 kg Positioning time per tool step: 250 ms Tool Holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Condition: used, Year of construction: 2008, x-travel 1.850 mm y-travel 1.400 mm z-travel 720/905 mm Control SIEMENS SL 840 D spindle turning speed range 15.000 U/min B - axis -20 / +120 ° Tool bore HSK-A63 0 tool magacine with 45 Plätzen tool length - max. 365 mm workpiece diameter at used places besides 90 mm tool diameter with 2 vacant positions 130 mm NC rotary table 1.600 mm T-slots 12 groove width 18H12 flute distance 100 mm table load capacity 3.000 KG Table speed max. 30 1/min total power requirement 89 kW weight of the machine ca. 26 t dimensions of the machine ca. 7,00 x 6,20 x 4,15 m 5-Axis machining center with Siemens SINUMERIK 840D control, BLUM Laser, Renishaw, RotoClear, Fire extinguishing system, 2x electronic handwheel, Steptec spindle, Spindle oil cooler, coolant through the spindle, High pressure pump, Bürener belt filter system, Chip conveyor. Machine can be inspected under power Rodpfevxwuwox Aamjn

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Redexcxz Nepfx Aamjn

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Rsdpfx Aew Sxyxeamjn

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Rodpfx Astuwk Usamjn

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Rodpew Emx Rofx Aamsn