Universal milling head

Mikron WF 51C/155

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Blodpfotuwk Usx Ak Heg

Condition: used, functionality: fully functional, Year of construction: 2000, working width: 3,050 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness (max.): 6 mm, back gauge: 750 mm, input voltage: 380 V, overall weight: 4,500 kg, Hydraulic vertical cutting shear Brand: HACO Model: TS 306 Sold by: Casanova Three-phase 380V Year: 2000 Type: Vertical cutting (blade inclination) Bljdjxgdlnepfx Ak Hsg Cutting length: 3050 mm Capacity: 6 mm Cutting angle adjustment: 0.5-3 degrees Number of hold-downs: 13 Strokes per minute: 8-14 Squaring arm: 1000 mm Back gauge: 750 mm Motorized back gauge with handwheel for fine adjustment Motor: 7.5 kW Weight: 4500 kg

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm Blodpekvrqiefx Ak Heg -Dimensions: see photos -Dimensions: 870/140/H130 mm -Weight: 18kg

Condition: good (used), Servo Drive, Servo Card, Input Processor, Control Card, Input Card, Controller, Converter, Controller, Servo Module, Axis Amplifier, Axis Amplifier, Velocity Control Unit, Spindle Amplifier Module, Servo Amplifier Bsdpswd N S Defx Ak Hjlg -Manufacturer: Bosch, transistor amplifier completely equipped from CNC milling machine Mikron WF 51C/155 -Type: TR15-XA-140-230V -Control cards/single modules: see photos -Dimensions: 480/260/H365 mm -Weight: 24 kg

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Bljdpfx Aephl Ecsk Hsg Spindle engine: 7,5 KW Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece Blsdskxhpuepfx Ak Hsg -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke Bsdekzpngspfx Ak Holg -Manufacturer: varimax, soft start choke, three-phase choke from CNC milling machine Mikron WF 51C/155 -Type: D 1515 S3 -Current: 10A -Dimension: 180/90/H190 mm -Weight: 9.5 kg

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 1,050 mm, feed length Y-axis: 360 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,050 mm, travel distance Y-axis: 360 mm, travel distance Z-axis: 500 mm, overall weight: 3,000 kg, Equipment: documentation/manual, Tiger FO 135 universal milling machine Description of the machine The machine was purchased new in 1994 and has only been in operation for a few hours. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition. good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a digital readout for the 3 axes, which makes it possible to work with cutter compensation and recurring measurement machining. Operating instructions are included with both the machine and the digital indicator. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic traverse path: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds ➢ Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed power: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ Direct current motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast feed ➢ Lengthwise and crosswise 3,000 mm/min Vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low-voltage electrical controls on the pushbutton panel of the side arm - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Machine dimensions (for transportation) ➢ Width 2,300 mm Bledpfx Aorqwbiek Hjg ➢ Depth 2,900 mm ➢ Height 2,400 mm Accessories - Counter supports for cutting shaft - Cutting shaft ø32 mm Tiger FO 135 universal milling machine Description The machine was purchased new in 1994 and has only had a few hours of operation. The milling machine is fully functional. Axis movements are smooth and the guides are in good condition. These have an automatic lubrication system. The table is in good condition and shows hardly any signs of wear. The machine also has a DRO for the 3 axes, which offers the possibility of working with milling compensation and recurring measurement processing. Both the machine and the DRO come with operating instructions. Technical specifications - Table dimensions 1,400 x 340 mm, 4 T-slots - Automatic travel: ➢ Longitudinal X 1,050 mm ➢ Transverse Y 360 mm ➢ Vertical Z 500 mm - Fixing the spindle cone: ➢ Vertical axis ISO 40, automatic locking ➢ Horizontal axis ISO 40, manual locking - Spindle speed range: ➢ Vertical axis 33 ÷ 1,560 rpm, 12 speeds Horizontal axis 35 ÷ 1,550 rpm, 12 speeds - Installed services: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor 15 Nm - Variable power supplies Continuous speed 0 ÷ 1,500 mm/min - Fast forward ➢ Longitudinal and transverse 3,000 mm/min ➢ vertical 1,500 mm/min - Universal head with manual shaft lowering of 80 mm - Automatic lubrication with pump - Low voltage electrical controls on side arm push button panel - Star/delta start - Magnetic thermal protection from Siemens - Net weight 3,000 kg - Dimensions of the machine (for transport) Width 2,300 mm ➢ Depth 2,900 mm ➢ Height 2,400 mm Accesories - Counter supports for cutting shaft - Cutting shaft ø32 mm

Condition: excellent (used), Year of construction: 2012, The Vertical Machining Center enables drilling, milling and cutting operations and cornering within the scope of technical capabilities indicated in the manual in details: plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, aluminum. The vertical work table allows for easy feeding and unloading of processed details and reducing the maximum size of the device to the minimum necessary. Tool change with the use of a 10-element magazine located on the side of the device, it enables various works to be carried out without the need to remove the workpiece from the table. Maximum dimensions of the processed detail: X= 4200mm Y= 1600mm Z= 20mm Rapid traverse speed (m/min): X=30 Y=30 Z=15 Set of milling heads T1 and T2: Spindle power (kW) - 3.3 Rotation speed (rpm) - max 18000 Electric spindle with clamp - ER32 T3 Drill Head Assembly: Blodpfxsmzbr Ss Ak Hog Spindle motor power (W) - 370 Rotation speed (rpm) - max 2800

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, warranty duration: 3 months, type of cooling: water, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, For sale: Miller PipeWorx 400 565 AMP (60% 500A, 100% 400A) 380 Volt 2013 Water-cooled Pulse RMD Programma memory Elektrode option Steel + Stainless Steel weldable Refurbished, tested, and serviced. Test welding possible Including 1,0-1,2mm feed rolls, 2x PRO5000 MIG welding torches, earth work lead with clamp, gas cable, transport cart, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Bodpfx Ajx Rppcok Hjlg We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.