Used Mikron Hsm 400 for sale (188)

Condition: ready for operation (used), Five older thread milling machines Mikron are available, 3x Hydraulic Thread Milling Machine Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 and 1x Short Thread Milling Machine Mikron 106.01, an on-site inspection is possible. Lhjdpfew Sxyxsx Abcsd

Condition: ready for operation (used), Speed: 3150 rpm, travel X/Y/Z: 710mm/500mm/500mm, number of spindle speeds: 21, feed: 2000mm/min, spindle mount: ISO40/M16, milling head table height: 559mm, table dimensions X/Y: 500mm/1000mm, T-slot spacing: 63mm, max. workpiece weight: approx. 500kg. Dimensions X/Y/Z: approx. 2700mm/2300mm/2200mm, weight: approx. 3300kg, control: Heidenhain TNC 155, documentation available. Ljdpfx Aetuwk Usbcehd

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Lsdpsxcxz Nsfx Abcshd

Condition: ready for operation (used), Travel X/Y/Z: 500mm/500mm/400mm, table dimensions X/Y: 460mm/800mm, tool holder: SK40, speed: 4000rpm, feed rate: 3m/min, rapid traverse: 5m/min, weight: approx. 2500kg. On-site inspection is possible. Lhjdpfx Abox Tul Iecjd

Condition: ready for operation (used), Year of construction: 2019, X-travel: 600mm, y-travel: 500mm, z-travel: 540mm, max. distance-table: 690mm, feed: 40m/min, table dimensions: 700x500mm, max. workpiece weight: 800kg, controls: Heidenhain TNC 620, connected load: 18kVA, length: 2240mm, width: 3338mm, height: 2803mm, weight: 5.6t, with documentation, has not run much. Lhodjv Hndfopfx Abcsd

Condition: ready for operation (used), Year of construction: 1994, Stations: 24, substations: 20, side stations: 20, axes: 2/station, collets: 24, production output single/double cycle: 120/240 pieces/min, stroke: 35mm, max. workpiece diameter: 25mm, spindle speed: 20000rpm, machine weight: approx. 2650kg, control: Mikron MAC 50, operating hours: approx. 17335h. Documentation available. An on-site inspection is possible. Ledpfxow Emx Rj Abcshd

Condition: good (used), Mikron WF 32 CH Universal milling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Lhedpfx Abowit Rhjcod Technical specifications Manufacturer: Mikron Type: WF 32 CH Control: Heidenhain TNC355 Travels: X 560 mm Y 500 mm Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min, Z 5,000 mm/min Spindle speed: 20 - 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our store! International shipping costs on request!

Condition: good (used), Mikron WF31D Precision milling and drilling machine Machine with chip and splash guard cabin Equipped with a Heidenhain TNC355 control system Technical specification The WF 31 D is a precision milling and drilling machine for series production and CNC training. Driven by an automatically shiftable stepped gearbox and Poly-V-belt. Vertical spindle can be extended by 90 mm; changeover from vertical to horizontal machining possible. Recirculating ball screws with DC drives enable simultaneous feed movements. Guides are protected against dust, chips and coolant. Technical data Manufacturer: Mikron Type WF31D Control: Heidenhain TNC 355 Longitudinal movement (X): 560 mm Transverse movement (Y): 500 mm Vertical movement (Z): 400 mm. Drive power: 3.3/4.0 kW Speed range: 40-4000 rpm. Feed speed: 2-3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min. Electrical equipment Total installed rated power: 10.0 kW installed effective power: 7.3 kW. Operating voltage: 3 x 380 V - 50/60 Hz Protection class: IP 54. Max. permissible ambient temperature: +35 °C Relative humidity: 75 %. Ledpfxewiucfe Abcohd Dimensions and weights Width 2450mm Length 2800mm Height 2000mm Net weight of the machine: approx. 2570 kg. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: used, Year of construction: 1990, x-travel 450 mm y-travel 400 mm Lhsdpspxrknjfx Abcjd z-travel 400 mm control Heidenhain 355 total power requirement 4 kW weight of the machine ca. 2,4 t

Year of construction: 1999, condition: excellent (used), Working travels 710x500x500mm Table size 1080x580mm Spindle taper 40 Spindle speeds -10000 rpm Tool changer 30 Pos. Control HEIDENHAIN TNC-430 Coolant through spindle MARCELS MASCHINEN CH Lhedpfx Abjd Hftxjcjd

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 Lsdpfx Ajrywgzjbcjhd with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 I/R module INT. 36/47 kW Lodjwcyk Uopfx Abcjhd -Type: 6SN1145-1BA02-0CA1 -Dimensions: 310/200/H480 mm -Weight: 15 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300VA -Primary: 3x380V -Technical data: see photo identification plate -Dimensions: 150/90/H150 mm Ljdpjkzpm Hofx Abcjhd -Weight: 5.7 kg

Condition: excellent (used), PLC controller, electronic modules, PLC module, plug-in card circuit board, circuit board -Manufacturer: Mikron, Electronic module circuit board for operating unit TCD22, original packaging -Type: WW TCD 22 . 104.73.20.041 -Cardboard dimensions: 410/310/H65 mm Lhodok Aua Nepfx Abcsd -Weight: 0.6 kg

Condition: used, Safety switch, safety switch, protective grille switch, limit switch, button, safety switch, position switch, magnetic locking switch, safety locking switch -Manufacturer: Schmersal, safety locking device made from CNC milling machine Mikron UME 600 -Type: AZM 161SK-33rka-024 IEC 60947-5-1 -Technical data: see photo of nameplate -Transport dimensions: 270/260/H60 mm Lhsdpfjrcnm Nsx Abcsd -Weight: 1.5 kg

Condition: used, PLC control, electronic modules, PLC module, plug-in card circuit board, circuit board, circuit board -Manufacturer: Mikron, electronic module circuit board from CNC milling machine Mikron UME 600 -Type: 958 78 11 200 -Dimension: 145/110/H55 mm -Weight: 0.4 kg Ledpfx Aborc Ilgocjhd

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Bosch, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: 100-911637 -Power: 4.5kVA -Primary: 3x380V -Secondary: 3x95/165 V -Dimensions: 335/135/H350 mm Lhsdpfx Aokyy Uqebcsd -Weight: 41 kg

Condition: used, machine/vehicle number: 152.00.80.20, Universal machining center, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -function tested -Clamping table: 800 x 445 mm -Travel: X/Y/Z 500/500/385 mm -Spindle holder: SK40 -quill stroke: 90 mm -Speeds from: 31.5 to 3150 rpm Lhjdpfx Asfbma Nobcsd -Coolant device -Dimensions: 1475/1770/H2000 mm -Weight: 1966 kg

Condition: used, CNC control, control panel, machining center operator panel, control unit, control panel, control unit -Manufacturer: Mikron, operating unit from CNC milling machine Mikron UME 600 -Type: TCD 22 - DIN 8659 -Printed circuit board: WW TCD 22 control unit 104.73.20.042 -Individual components: see photos -Dimensions: 480/240/H160 mm Ljdpfx Aercnmwjbcehd -Weight: 5.3 kg

Condition: used, Ball screw with nut, transroll screw, ball screw nut, lead screw, threaded rod, threaded bolt, threaded rod, ball screw, linear bearing, precision ball screw -Manufacturer: Mikron, ball screw from CNC milling machine Mikron WF 51C/155 -Thread length: 540 mm -Shaft: Ø 32 mm -Dimensions: see photos Lsdpjkvrqijfx Abcjhd -Dimensions: 870/140/H130 mm -Weight: 18kg

Condition: used, CNC control, control panel, logic unit, path control Lodpfxepz Sf Ee Abcjhd -Manufacturer: Heidenhain, logic unit path control -Type: LE 407 A 236 484 10 -Individual components: see photos -Dimensions: 480/330/H140 mm -Weight: 9.5 kg

Condition: good (used), Tool changer chain, chain magazine, tool changing system, tool magazine -Manufacturer: Mikron, tool changer from CNC machining center Mikron UME 600 -for: max. 22 shots -Intake: SK40 -Dimensions: 1200/1150/H860 mm -Transport weight: 294 kg Ljdpforb E E Nox Abcjhd

Condition: good (used), Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm Lhjdpfx Aekxhpujbcsd -Weight: 23 kg/pc.

Condition: good (used), PLC control, mains filter, mains filter, Simodrive choke transformer -Manufacturer: Siemens, Simodrive 611 choke and transformer from CNC machining center UME 600 -Chorus: Type 6SN 1111-0AA00-0BA0 -Transformer: Trasfor TNT BN 2K5/E -Price/Delivery: complete -Dimensions: 525/240/H230 mm Ljdpfxjrbm Uhe Abcjhd -Weight: 33.6 kg

Condition: good (used), PLC control, power module, LT module, I/R module, regenerative module -Manufacturer: Siemens, Simodrive 611 LT module INT. 50A from CNC milling machine Mikron UME 600 -Type: 6SN1123-1AA00-0CA0 Lhjdpfxerb E Hbo Abcjd -Dimensions: 290/50/H480 mm -Weight: 6.8 kg