Used Mikron Vce 800 for sale (177)

Year of construction: 1987, condition: good (used), Mikron WF2SA tool milling machine with 3-axis Heidenhain active digital readout. Fixed angle table, SK 40 spindle holder. Ready for operation . Machine ready for demonstration under power by arrangement. Rcodpsqttt Tjfx Aabsh

Condition: good (used), Year of construction: 2002, Machine is in good condition. Rodpfx Astwpamoabjch Parts shown by hand not come.

Condition: used, Year of construction: 1997, max. module 2,5 min. module 0,3 control Fanuc 16 M current 19 A total power requirement 12 kVA weight of the machine ca. 5,5 t Manufacturer PFAUTER MIKRON Model A 15 CNC Equipment: Rcsdpfevu E Nnex Aaboh - CNC Siemens 840 C - Wet and oil machining are both possible - Manual and electrical circuit diagram High quality and stability, combined with corresponding performance data and modern CNC technology, make the A 15 CNC the ideal gear hobbing machine. The short changeover times also allow economical small series production. The impressive quality of Pfauter-Mikorn products guarantees you a trouble-free production process and a long service life for your machine. --> Technical data max. millable module for hobbing: 2.5 mm --> max. millable module for high-performance milling: 2.0 mm --> Number of teeth: 1 - 999 teeth Workpiece data: --> max workpiece Ø automatic loading: 60 mm --> max workpiece Ø manual loading: 100 mm --> max workpiece length automatic loading: 200 mm --> max workpiece length manual loading: 300 mm Working paths: --> X-axis (infeed): 66 mm --> Y-axis (milling length): 150 mm --> Y-axis (shifting): 100 mm --> A-axis swivelling angle (milling head): 50°/50° --> Quill stroke: 110 mm Feed speed: --> X-axis: 0 - 6,000 mm/min --> Z-axis: 0 - 6,000 mm/min --> Y-axis: 0 - 4,000 mm/min Speed range: --> B-axis (milling cutter): 200 - 4,000 min-1 --> C-axis (workpiece): 0 - 375 min-1 Milling performance: --> Motor power 50% ED (B-axis): 3.7 kW Travelling stick: --> max. clamping force: 9 kN --> infeed path: 205 mm Headstock: --> mounting: mechanical --> spindle passage: 32 mm --> Spindle axis from floor: 1200 mm --> Hydraulic operating pressure: 50 bar

Condition: ready for operation (used), Year of construction: 2008, operating hours: 3,825 h, functionality: fully functional, machine/vehicle number: 214.84.70.265, MIKRON HSM 400 U from 2008, very few operating hours Rcjdpfjxg Rvyjx Aabeh

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: 956.71.80.274, feed length X-axis: 600 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, input voltage: 400 V, Equipment: documentation/manual, The system shown is in perfect condition and ready for immediate use. Rcsdpfx Aewnq Sgeabeh No heavy roughing work has ever been performed with this machine. The machine is being sold together with a vise, including a tool cabinet with the shown contents. Additionally, it comes with 2 sets of ground supports and approximately 80 cutters, all in usable condition (some barely used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum.

Condition: good (used), Year of construction: 1998, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 107.40.98.165, Year 1998 Heidenhain TNC 430 710x500x500 mm - 42000 RPM Netweight 5670 kg Dimensions 2794x2997x3035* mm TECHNICAL DATA Table Dimensions 1220 x 457 mm Admitted load 1575 kg T-grooves 14 mm Number of T-grooves 5 Travels Longitudinal X 1016 mm Transverse Y 508 mm Vertical Z 635 mm Workspindle Power of AC-motor, 2-stepped gears 11kW Speed range, continuous 10-7500 min-1 Rsdpfxocl Rurs Aabjch Spindle speed (option) 10'000 rpm Taper ISO40 Feeds drive Feed programmable axes X, Y & Z 0 – 7620 mm/min Rapid feed axes X, Y, Z 18,0 m/min Automatisation Tool changer 20 pos Tool changing time (for nearby posts) 5,0 sec. errors and omissions excepted-data given without obligation Inventory Nr.4112006, machine equipped with  : NC Heidenhain TNC430M Milling spindle 42’000 min-1, HSK 40 E 36 tool positions Electronical handwheel Tool measuring Renishaw TS27 Ethernet card Minimal quantities greasing Unilube Aspiration Lumestat Protection cabin Rotary table Air passage through rotary table Vacuum clamping (by external provider) Spray gun Chips conveyor

Year of construction: 1987, condition: used, machine/vehicle number: 152.41.74.002, table mounting size: 500 x 1000 mm movement x: 630 mm movement y: 500 mm movement z: 460 mm tailstock stroke: von Hand 45 mm spindle taper: ISA 40 spindle turning speed range: 31,5 - 3150 rpm carriages continuously adjustable: 1 - 3000 mm/min rapid move: x/y 6 / z 4 m/min electrical connection: 380 V, 6/8 kW Rcodpfo H I Hdox Aaboh space needed: 1800 x 2120/2600 x 2020 mm weight: 3100 kg control: HEIDENHAIN, TNC 155

Condition: good (used), Year of construction: 2000, 20000 rpm, Rcjdpfx Aer Urm Soabeh tool measurement on table will come, Parts shown by hand not come.

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm Rcedpfxjub Amfo Aabjh - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: ready for operation (used), Year of construction: 2011, operating hours: 15,000 h, Control Unit Brand HEIDENHAIN Model iTNC530 Main Drive Spindle speed range 20000 rpm Number of axis 5 Movement X-Axis Movement 650 Y-Axis Movement 650 Z-Axis Movement 550 Tools Number of index 30 Type of tool holder HSK63 Additional Equipment Internal cooling supply with ARO belt filter system and extraction 30 tools, HSK63, 20000 rpm Optional accessories such as clamping devices and tools available This 5-axis MIKRON HPM 600U was manufactured in 2011. A vertical machining centre designed for precision and efficiency, it's ideal for complex machining tasks. Consider the opportunity to buy this MIKRON HPM 600U vertical machining centre. Contact us for more information. Redpfow S N Ersx Aabjch Application Types Milling

Condition: good (used), Year of construction: 2000, Travels 1350 x 900 x 750 mm Machine. - Control Heidenhain TNC 426 Equipment tool changer 46-fold, milling spindle SK 40 12.000 rpm, incl. IKZ system and spool feeder Glass scales, 3D probe Renishaw MP12 Rodpfxji El Iaj Aabsch Extensive accessories available if required! Please ask if you are interested !

Year of construction: 1992, condition: ready for operation (used), X-axis: 560mm, Y-axis: 500mm, Z-axis: 400mm, clamping table dimensions vertical: 300/450mm, number of threaded holes: 2/6, threaded hole spacing: 45mm, thread: M16, angle table clamping surface: 460/800mm, number of T-slots: 7, T-slot spacing: 63mm, T-slot width: 14mm, max. workpiece weight (recommended): 350kg. Milling spindle drive number of working spindle speeds: 21, speed (geometrically graduated): 40-4000/min, step increment: 1.259, spindle motor power: 3.3/4kW, tool holder: ISO 40 / M16 with draw-in groove, vertical quill stroke: 90mm, feed in all 3 axes steplessly adjustable: 2-3000mm/min, rapid traverse X-axis and Y-axis: 6000mm/min, rapid traverse Z-axis: 4000mm/min, feed motor torque longitudinal and transverse: each 3.5Nm, feed motor torque vertical: 7Nm, control: Heidenhain TNC 407, connected load: 8.7kW, length: 3705mm, width: 2430mm, height: 3100mm, weight of the machine with vertical milling head and angle table: 2410kg, weight of the crate base: 170kg, weight of the transport crate: 400kg, operating hours: 18,924h. Accessories: 3D probe, 20x tool holders, splash guard cabin, coolant pump, work light, handwheel, machine documentation. An on-site inspection is possible. Redpfexcxz Nox Aabsch

Condition: used, functionality: fully functional, Universal Milling Machine Mikron WF 3S with 3-axis Heidenhain TNC 114 digital readout and infinitely variable feed Technical Data: >> Year of manufacture: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed on 3 axes from 1 to 750 mm/min >> Rapid traverse on 3 axes: 1400 mm/min >> Travels X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight approx. 1600 kg Accessories and Equipment: Rcodjw Ni Riepfx Aabsh >> 3-axis active digital readout Heidenhain TNC 114 >> Central lubrication >> Operating manual, programming manual, electrical diagrams About the Machine: For sale is a used Mikron WF 3S universal milling machine. It features a Heidenhain path control TNC 114, which means it can move to a programmed dimension in any chosen axis (X, Y, or Z) and stops automatically upon reaching it. Four different zero points can be set, and dimensions can be entered as absolute or incremental values. The feed rate is infinitely adjustable from 0–750 mm/min, and can also be regulated during machining. Rapid traverse can be activated at the push of a button, while spindle speed is step-adjustable from 50 rpm to 2240 rpm, but only adjustable when the machine is stationary. The vertical milling head is mounted with three bolts and can be removed and reattached in just 2 minutes. It is hand-fastened using the swing arm seen on the left side of the machine and can be simply swung aside. A key feature of the machine are the large travel distances relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Additionally, the machine is equipped with electronic protection for the vertical spindle. Both mechanically and electrically inspected. Take the opportunity to inspect and test the machine under power on site.

Condition: good (used), MAchine come with toolholders. Redpfevk Ng Aox Aabech

Condition: good (used), Year of construction: 1972, max. wheel diameter 80 mm gear width 60 mm max. module 3 Rcjdpfxow N S D Se Aaboh min. module 0,1 total power requirement 0,4 kW weight of the machine ca. 120 kg dimensions of the machine ca. 0,6x0,6x0,75 m

Year of construction: 2023, condition: new, Polyp Scrap Grapple for Cranes Palfinger Hiab Capacity: 300 Lt / 0.3 m3 Model: 4 Tinned - Half Closed Gross Weight: 450 Kg Rcedpjnziblofx Aabeh

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, spindle speed (max.): 2,240 rpm, spindle speed (min.): 30 rpm, total height: 1,750 mm, total width: 1,790 mm, total length: 1,375 mm, table width: 450 mm, table length: 800 mm, overall weight: 1,450 kg, The milling machine is connected to the network and can be inspected by appointment. Very good condition. Accessories: 10 tool holders SK 40 Rcjdpfx Aaexbtaqsbsh 1 hydraulic machine vice with Heidenhain path control.

Condition: not inspected (used), Year of construction: 2000, operating hours: 6,191 h, functionality: unexamined, machine/vehicle number: 7158, travel distance X-axis: 1,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, No minimum price – guaranteed sale to the highest bidder! Loading can take place on 08/09/2025 or 09/09/2025! TECHNICAL DETAILS Spindle Rjdpsw Hq Ifjfx Aabech Spindle speed: max. 15,000 rpm Tool Data Tool magazine: 46 positions Tool holder: ISO-B40 Travel X-axis travel: 1,000 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Table NC rotary swivel table diameter: 800 mm Rotary Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible load (with clamped swivel axis): 10,000 N Rotational speed of rotary axis: 12 rpm Swivel Axis Nominal speed: 3,000 rpm Static torque (100K): 27 Nm Permissible load (5-axis operation): 5,000 N Maximum rotational speed of rotary axis: 4 rpm Control: HEIDENHAIN TNC 426 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,200 x 2,900 x 3,000 mm Weight: 7,500 kg Spindle hours: 6,191 h Machine runtime hours: 26,997 h EQUIPMENT Technical documentation SK 40 tool holders ATORN 3D probe Note: The tool holders visible in the images are included in the scope of sale and delivery. The tools clamped in the holders, such as drills, reamers, milling cutters, etc., are not included in the scope of sale and delivery. The drive for the head swivel axis is missing.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: KU 4165M, travel distance X-axis: 572 mm, travel distance Y-axis: 322 mm, travel distance Z-axis: 265 mm, rotational speed (max.): 15,000 rpm, number of slots in tool magazine: 22, The value of the supplied spare parts is approximately €70,000. TECHNICAL DETAILS Loading Modules: 1 module Machining Modules: 3 modules Number of Spindles: 6 Control System System: Bosch Rexroth MTX Part Program Size: Unlimited Remote Diagnosis: Available Programming: ISO code, simulation via EdgeCAM CAM software Workpiece Handling and Loading System Loading System: Parallel to main time, manual, with 3-axis handling or robot Parts Feeding: Paternoster / stack magazine Workpiece Changeover (chip-to-chip time): approx. 6 s Axes Travel X: 572 mm Travel Y1/Y2: 322 mm Travel Z: 265 mm Speed X: 40 m/min Speed Y1/Y2: 32 m/min Rcsdpfx Aasxamh Eebeh Speed Z: 25 m/min Acceleration X: 8 m/s² Acceleration Y1/Y2: 8 m/s² Acceleration Z: 4 m/s² Feed Force X: 1,100 N Feed Force Y1/Y2: 1,100 N Feed Force Z: 2,500 N Rotational Speed B-Axis: 1,000 rpm Rotational Speed C-Axis: 500 rpm Acceleration B-Axis: 52 rad/s² Acceleration C-Axis: 90 rad/s² Torque B-Axis clamped: 1,000 Nm Torque B-Axis unclamped: 287 Nm Torque C-Axis clamped: 300 Nm Torque C-Axis unclamped: 187 Nm Working Spindle Tool Interface: HSK 40-A External Diameter: 108 mm Speed: 15,000 rpm Torque (S6 45% duty cycle): 85 Nm Power (S6 45% duty cycle): 18 kW Internal coolant supply up to: 120 bar Spindle distance: 200 mm Workpiece Repeatability: +/- 2 µm Clamping Force: approx. 10 kN (self-locking) Diameter: 140 mm Length: 180 mm Weight: 21 kg Workpiece Clamping Clamping System: EROWA clamping system Activation: pneumatic, 6 bar Tool Changer Tool Discs: externally pre-loadable with position coding, diameter Ø 290 mm Tools (2 discs with 12 positions) per machining module: 22 Tool Disc Weight: 5 kg Max. Tool Weight: 2.5 kg Max. Free Tool Length: 186 mm Max. Tool Diameter: 63 mm Max. Tool Diameter with free adjacent position: 105 mm Shortest chip-to-chip time: ≥ 1 s Max. Total Tool Weight on Disc: 15 kg Positioning time per tool step: 250 ms Tool Holder: HSK 40-A, according to DIN 69893 MACHINE DETAILS Machine dimensions (L x W x H): approx. 9,300 x 3,400 x 3,500 mm Weight per machining module: approx. 4.5 t Weight per loading module: approx. 2.5 t

Condition: good (used), Year of construction: 1996, Parts shown by hand not come. Machine have 2 spindles. One for 6.300 min-1 SK 40 Redpfx Asruauqeabsch Second up to 42.000 min-1 HSK E40. Spindle replaced 2018.

Year of construction: 1990, condition: excellent (used), Mikron WF2S tool milling machine with 3-axis Elesta-Visulesta digital display. Rigid angle table , SK 40 spindle mount. Very good working condition , from institute. Machine ready for demonstration under power by arrangement. Rcjdeg Nw Rzspfx Aabsh

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Heidenhain iTNC 530, working area X 600 x Y 450 x Z 450 mm, spindle mount CAT40, 24-position automatic tool changer, 20,000 rpm spindle, machine weight 6,100 kg, power connection 16 kW, main fuse 32 A, operating voltage 400 V, 50/60 Hz Rodpfsw Hxzmjx Aabjch

Condition: ready for operation (used), Year of construction: 2007, operating hours: 29,655 h, functionality: fully functional, machine/vehicle number: 73.110, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,100 mm, table load: 1,600 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 92, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (longitudinal): 1,350 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Control: Heidenhain iTNC 530 Spindle speed: 12,000 rpm Tool magazine: 92 slots Rcsdpevxr I Eefx Aabsh Feeds and travel speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,100 mm Max. workpiece weight: 1,600 kg MACHINE DETAILS Machine: 12,600 kg Dimensions: 4,650 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 34,205 h Spindle hours: 29,655 h EQUIPMENT - without magnetic table

Condition: good (used), Year of construction: 2002, functionality: fully functional, feed length X-axis: 400 mm, feed length Y-axis: 240 mm, feed length Z-axis: 350 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, spindle speed (max.): 30,000 rpm, Mikron HSM 400U 5-Axis CNC (Graphite Mill) Year:2002 S/N: 107.87.00.024 Control: Heidenhain iTNC530 Spindle Taper: HSK-E40 Spindle Speed: 30,000 RPM Spindle Power: 13 kW (17 HP) ATC: 36-Station Automatic Tool Changer Travels: X: 15.723″ (400 mm) Y: 9.434″ (240 mm) Z: 13.758″ (350 mm) A-Axis: ±110° C-Axis: 360° / 0.001° Tooling System: System 3R Tooling Base (on Trunnion) 48-Station System 3R Tooling Carrousel Blum Laser Tool Measurement System Rapid Traverse Rate: 40 m/min (1,575 IPM) Repeatability: ±0.002 mm Rcedpfx Asw H Izpeaboh Max Workpiece Capacity: Ø230 mm × 350 mm Height Max Load: 25 kg Structure: Polymer Concrete Frame Cooling System: Full Liquid Cooling Machine Dimensions (L×W×H): 3,840 × 2,540 × 2,640 mm Weight: 6,700 kg

Condition: ready for operation (used), Year of construction: 2006, operating hours: 21,967 h, functionality: fully functional, machine/vehicle number: 84.34, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, table width: 1,000 mm, table load: 1,100 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 46, swivel angle A-axis (min.): -120 °, swivel angle A-axis (max.): 16 °, Insolvency auction - all machines functional and ready for demonstration. Property of a German GmbH TECHNICAL DETAILS X-axis (longitudinal): 1,000 mm Y-axis (transverse): 1,150 mm Z-axis (vertical): 700 mm A-axis: +16° / -120° C-axis: n x 360° Simultaneously controllable axes: 5 axes Rcjdpfovxr Ilsx Aabeh Control: Heidenhain iTNC 530 Spindle speed: 15,000 rpm Tool magazine: 46 slots Feeds and travel speeds X and Y axis: 15 / 30 m/min Z axis: 15 / 30 m/min A axis: 11 / 20 rpm C axis: 40 rpm Work table Clamping surface: Ø 1,000 mm Max. workpiece weight: 1,100 kg MACHINE DETAILS Machine: 12,300 kg Dimensions: 4,600 x 3,030 x 3,300 mm Connected load: 75 kW Operating voltage: 400 V, 50 Hz Noise protection level: 68 dB(A) Program run: 40,095 h Spindle hours: 21,967 h EQUIPMENT - without magnetic table