Used Milling Motor for sale (31,231)

Condition: used, Year of construction: 1994, Deckel FP4 MA Universal Milling Machine Universal Milling Machine Deckel Type/Model FP4 MA Condition Used Year of Manufacture 1994 Technical Data Travel in X / Y / Z axis 485 x 385 x 380 mm Quill stroke approx. 70 mm (manual) Table surface 460 x 800 mm Spindle speed 50 to 3,150 rpm Tool holder SK 40 Operating voltage 3-phase 380 V 50/60 Hz Feed rate 2 to 1,000 mm/min Continuously adjustable Rapid traverse 2 m/min Machine weight approx. 1,850 kg Feature Prjdpfx Ajz Ar Tfolweb - Deckel Dialog / Contour control Inquiry item: Transportation costs in a separate quote.

Condition: used, Year of construction: 1970, Deckel FP1 Tool and Cutter Grinding Machine Tool and Cutter Grinding Machine Deckel Type/Model FP1 Condition: Used, geometrically overhauled in 2026 Year of manufacture: approx. 1970 The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was carried out. The machine geometry was checked and adjusted. A test report according to DIN 8615 is available. During the work, the gibs were also adjusted, and the coolant pump was overhauled. Technical data Pedpoz A Tn Iofx Alworb Travel ranges X/Y/Z: 300 / 150 / 340 mm Spindle stroke: 60 mm vertical Tool holder: MK 4 Speed range: 40 to 2,000 rpm, two-stage motor, gear stages Speed stages: 16 speeds Feed: 16 stages, 10 to 500 mm/min Drive power: Two-stage motor, approx. 1.0 / 1.4 kW Operating voltage: 380 V / 50 Hz Total connected load: approx. 1.9 kW Clamping area: 600 x 210 mm Max. table load: approx. 150 kg Space requirement (W x H x D): approx. 1,100 x 1,000 x 1,500 mm Weight approx.: 750 kg Inquiry item: Shipping costs in a customized offer.

Condition: good (used), Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor Prjdpfxswnmn Rj Alweb -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Condition: like new (used), functionality: fully functional, Tool milling machine Deckel FP 4 MK Type 2203 Prodpfx Alszvxlhjwjb Equipped with a hydraulic tool clamping system and central lubrication.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347141 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel ranges X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating instructions for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Psdpfx Aloz Eh Uuowerb Offered is a tool milling machine Kunzmann WF4/3 with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. The conversion from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take the opportunity to inspect and test the Kunzmann on site under power. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: good (used), Forklift motor with gearbox, electric motor, DC motor, traction motor, drive motor -Voltage: 22 volts -Power: 5.2 kW -Speed: 2800 rpm -Shaft: Ø 28 mm Prsdpfedvmbiex Alweb -Quantity: 2 available -Price: per piece -Dimensions: 290/H230 mm -Weight: 26 kg

Condition: new, Year of construction: 2026, MIZAR HMR Series - Industrial Hammer Mill for High-Efficiency Recycling Maximize Your Recycling Power with Mizar Hammer Mill The Mizar Hammer Mill is an innovative and robust grinding machine designed to meet the toughest demands of the recycling and processing industries. Engineered for efficiency, this mill utilizes high-speed rotating hammers to crush, grind, and pulverize a wide range of materials into fine, manageable particles. Its versatile design allows for easy adjustments to accommodate different materials and desired particle sizes, making it suitable for a variety of recycling operations. KEY ADVANTAGES & FEATURES • Robust & Innovative Design: Built for heavy-duty use with durable Hardox 500 hammers and fixed blades, ensuring long-lasting performance and minimal maintenance. • Adjustable Output: Customizable particle size allows for easy adjustments to accommodate different materials. • High Throughput: Enables consistent production and high throughput for large-scale processing. • Energy Efficient: Engineered for lower operating costs and higher productivity. PROCESSED MATERIALS • E-waste (Circuit Boards), Scrap Radiators, Multi-metal Materials, Plastics, Wood, and Agricultural Products. MODEL RANGE & TECHNICAL SPECIFICATIONS Predpfx Alewhap Ueweb • HMR S: Capacity: Up to 400 kg/h | Total Power: 37 kW | Hammer Qty: 12 | Crushing Chamber: 600 mm | Weight: 2800 kg • HMR M: Capacity: Up to 800 kg/h | Total Power: 55 kW | Hammer Qty: 16 | Crushing Chamber: 800 mm | Weight: 3600 kg • HMR L: Capacity: Up to 1,300 kg/h | Total Power: 75 kW | Hammer Qty: 24 | Crushing Chamber: 1000 mm | Weight: 4500 kg Enhance your processing capabilities with the Hammer Mill—an essential tool for any facility looking to improve efficiency and maximize output. Contact us for a customized quotation, technical details, or to arrange a performance test.

Condition: used, Year of construction: 2019, Deutz TD 2.9 L4 Diesel Engine! Like new / Unused! ----* Manufacturer: Deutz * Type: Deutz TD 2.9 L4 * Power: 55.4 kW * Year of Manufacture: 2019 * Like new / Unused! Pjdjz Exnxjpfx Alwerb * 4-cylinder diesel engine * 2.9 liter displacement * Includes spare parts, see photos! * Price: 6,900 Euro, net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp ?All information is provided without guarantee and warranty, errors and prior sale excepted.?

Condition: used, Year of construction: 2010, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 DIN 69871 table surface area 700 x 500 mm max. table load 500 kg T-slots 7x 14 x 63 mm number of toolpositions 60 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm change-time tool to tool 1,6 sec change-time chip to chip 8,0 sec rapid traverse 24 m/min Feed force ( X / Y / Z ) 4,5 kN feed speeds 1 - 24.000 mm/min total power requirement 26 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Vertical DECKEL MAHO - DMU 50 Pjdpfx Ajy E Tv Aelwerb - 3 Axis - only ca. 8.097h Spindle-Hrs. - Backup package for power outages - DXF import

Condition: used, Year of construction: 2012, functionality: fully functional, Control system: Matrix II Travel ranges: X-axis 207 mm Prodpfx Ajz Dtmgelwjb X2-axis 141 mm Y-axis 100 mm Y2-axis 70 mm Z-axis 760 mm Z2-axis 815 mm Main spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Counter spindle: Drive power 22 kW Max. spindle speed 5,000 rpm Spindle nose A2-6 Tool turret: Number of tool positions 24 Max. speed of driven tools 6,000 rpm Tool stations 24 Driven tool stations 24 2 pcs. 12-position turret Max. turning diameter: Max. turning diameter (upper turret) 344 mm Max. turning diameter (lower turret) 210 mm Max. swing diameter: Max. swing diameter (upper turret) 370 mm Max. swing diameter (lower turret) 320 mm Additional equipment: Bar feeder LNS Robot interface Automatic door Tool setter on the right and left Chip conveyor, discharge to the right Separate coolant system 15 bar high-pressure pumps Coolant temperature control

Condition: good (used), A lot of accessories, is only offered completely! Travel X / Y / Z: 300 / 300 / 135 mm Table size W x D: 700 x 190 mm Spindle speed: 95 - 6000 rpm / 11 steps Tool holder: W 20 Psdpfx Aod Erqbelwjrb Weight: approx. 450 kg Machine size W x D x H: approx. 900 x 900 x 1500 mm Accessories: Swivel table Round table Ø 200 mm 6 shots Various collet chucks and clamping devices Horizontal milling device work lamp coolant system vice

Condition: good (used), travel distance X-axis: 500 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, table width: 270 mm, table length: 800 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, Brand: Thiel Model: Duplex 159 3-axis coordinate display Travel: X 500mm, Y 300mm, Z 400mm ISO 40 Speeds: 40 - 2000 rpm Table: 800x270mm Includes an accessory for additional table tilting. Includes all the tools shown in the photographs. Pjdpfx Aoz Dt Htolwerb Includes a vise with a rotating base. Features safety guards in compliance with CE standards.

Condition: used, 1 used, partially overhauled universal milling head, System "HURON" Mount ISO 40 Overhang 300 mm Centering flange diameter 125 mm Rated drive power 10 HP Max. speed 1800 rpm Milling head dimensions L x W x H approx. 375 x 245 x 300 mm Weight approx. 80 kg Accessories / Special features: Pjdpfxjz Adz Ue Alwerb • Manual tool clamping • 2 axes that can rotate relative to each other, allowing any setting angle! System "HURON" • Tapered interfaces are manufactured according to the "KLINGELBERG" system • The main spindle's roller bearings consist of tapered high-precision rollers • 1 tool clamping screw The spindle and gear bearings have been completely renewed! Design: standard, for retrofitting to conventional, NC or CNC milling machines or drilling machines of any type Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), electric motor, three-phase motor -Condition: unused -Manufacturer: Weg, electric motor type W22 280S/M-02 -Power: 90 kW -Speed: 2970 rpm Predeuicdyopfx Alwob -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 55 -Quantity: 1 electric motor available -Price: per piece -Dimensions: 1070/560/H745 mm -Weight: 692 kg

Condition: good (used), Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Milling unit: unfortunately no type designation Psdpfx Ajgyg Avjlwerb -Motor: 2x Holz-Her 2200 W / 2800 rpm -Drive belt: not included -Motor block: dimensions 400/340/300 mm -Milling unit: 530/440 / H300 mm -Weight: 81 kg

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Podpfxju H R Iwj Alworb Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: Ob 21882, spindle speed (max.): 700 rpm, feed length X-axis: 15,000 mm, feed length Y-axis: 5,150 mm, feed length Z-axis: 1,600 mm, total width: 6,400 mm, total length: 19,300 mm, total height: 10,370 mm, feed length W-axis: 2,000 mm, spindle diameter: 250 mm, table height: 400 mm, table length: 8,000 mm, table width: 5,665 mm, overall weight: 1,37,000 kg, year of last overhaul: 2006, grinding spindle motor power: 83,000 W, type of input current: three-phase, We offer for sale a Škoda W250H floor boring machine. This machine is designed for machining heavy and large-sized components for the energy, shipbuilding, metallurgical, mining, and machine production industries. The machine is equipped with a Siemens Sinumerik 840D control system, enabling the execution of demanding boring, drilling, and milling operations. Complete technical documentation is available. Upon request, we can provide additional photos, videos, and information regarding the machine's equipment and technical condition. Standard equipment: Prodpfxjzrwq Io Alweb Tool and measuring instrument storage rack, mounted on the spindle box. Optional equipment: Cooling system with coolant Rotary table 4000x3550 3 x angular heads

Condition: refurbished (used), Shaft milling cutter Manufacturer: Garant Type: EQ 753200 Grooving milling cutter Corner milling cutter Pedpfx Aljiuh Eyjwerb Shaft diameter: 20 mm Cutting length: 38 mm Used Newly ground and coated Material: HSS Co 8

Condition: as good as new (ex-display), Gearbox motor, manufacturer Getriebebau Nord Type SK-80 LI4TF i = 21.28 n2 65 min/1 400 Volt 0.75 kW Year of manufacture: 2011 Unused, from warehouse clearance Weight: 19.5 kg Transport dimensions: Pedpolrt Tujfx Alwsrb L. 480 mm W. 160 mm H. 240 mm

Condition: excellent (used), End mill for cylindrical surfaces Pjdpfx Aled Hfi Uswerb Shell mill Manufacturer: Mitsubishi Type: SPX4R05034BT50NM Length: 340 mm

Condition: new, Copy and face milling head (28466) Make Widia Pjdjrwfpfopfx Alwerb Type M 100 Copy Mill D 63 OZ5 diameter 63 mm in opened original packaging

Year of construction: 2016, condition: excellent (used), Indexable insert milling cutter – Face milling cutter Manufacturer: Mitsubishi Type: AHX 640 W 160 C 22 R Multicorner Face milling cutter for high feed rates For 22 heptagonal inserts Cutter diameter: 160 mm Pedpfefc Tq Eox Alworb

Condition: excellent (used), Milling arbors SK 50 Cutter holder Podpfswc N Ddox Alwerb Diameter 3 x 27 mm 1 x 32 mm Stock number 28609 Weight 12.5 kg Pack of 4 for €100 Other sizes and quantities upon request

Condition: good (used), Year of construction: 1998, x-travel 1650 mm Pedpfx Aljz Dxr Uewsrb y-travel 1950 mm z-travel 700 mm Control FIDIA M20 spindle taper HSK 63 A spindle turning speed range 16000 U/min milling spindle drive 28 kW head swivability +- 100 ° c-axis 365 ° weight of the machine ca. 27 t dimensions of the machine ca. 4,2 x 4,9 x 4,4 m

Condition: ready for operation (used), GSC P1050 DC servo motor, serial number: 288565, used, shows significant signs of wear, 100% functional, scope of delivery as shown in the photos. Prjdpfxei D Ibge Alwsb