Used Milling Motor for sale (30,018)

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators Gijdpfx Ajy At Tcogfjr The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, Granulator / Granulators Manufacturer: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with a replaceable third bed knife (deflector) for processing thick-walled materials. Inlet hopper suitable for conveyor belt feeding. Rotor mounted outside of the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: rotor and stator knives are positioned opposite each other and cut in a scissor-like manner. With base frame including vibration dampers. Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW Gjdsy At Sropfx Agfeir

Condition: used, power: 160 kW (217.54 HP), New hydraulics, new knives, new bearings Drive: 160.0 kW Rotor knives: 5x2 Giedpfx Agey At Sljfsr Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Feed opening: 800 x 1200 mm

Condition: used, Cutting mill / Cutting mills Manufacturer: HERBOLD Meckesheim GmbH Type: SMS 45/60 Heavy-duty series Infeed opening 600 x 680 mm Gisdpfx Agey At R Iofer Drive motor 75 kW

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Gedpfey At Rnex Agfeir Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, HERBOLD granulator type SMS 60/100 Heavy version Inlet opening 700 x 1000 mm Open rotor 600 mm diameter x 980 mm width (optionally as open 3- or 7-blade rotor) Giodpfxjy At I Tj Agfor Drive motor 110 kw Folding device with electric winch

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Gijdjy At I Hjpfx Agfer Accessories: with used control cabinet Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, Cutting mill Gsdsy At Imspfx Agfoir Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Gijdpfey At H Nsx Agfsr Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Giodpfx Agoy At Hiofor Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Gjdpjy Atyiofx Agfjir Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, power: 160 kW (217.54 HP), Granulator DREHER 26/90 / Granulators The machine is equipped with precision-ground blades and is suitable as a granulator for punching grids and film webs. Machine data: Drive: 7.5 kW Rotor blades: 5x3 Stator blades: 2x2 Gijdpfey Atxrjx Agfsr Rotor diameter: 260 mm Rotor width: 900 mm With roll feed

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Gedpfoy Atw Ijx Agfeir Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Condition: used, machine/vehicle number: 14039, Rotor diameter: 260 mm Rotor width: 410 mm Giedpfxjyr Tzks Agfer Rotor knives: 3 Stator knives: 2 Infeed opening approx.: 410×600 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 14038, Rotor diameter: 260 mm Rotor width: 260 mm Gjdpfx Agjyr Tzdefoir Rotor knives: 3 Stator knives: 2 Feed opening approx. 350×550 mm Drive motor: approx. 5 kW

Condition: used, machine/vehicle number: 14037, Rotor diameter: 260 mm Rotor width: 450 mm Rotor knives: 3 Stator knives: 2 Giodpfsyr Ty Tjx Agfjr Infeed opening approx. 440×400 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 14019, Rotor diameter: 800 mm Rotor width: 600 mm Gjdjyr Ty Hepfx Agfsir Rotor knives: 6×16 Stator knives: Infeed cross-section approx. 580×400 mm Drive motor: 75 kW

Condition: used, machine/vehicle number: 14003, Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3×2 Stator knives: 3 Feed opening approx. 300 x 600 mm Giedpfeyr Tymox Agfjr Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Gijdpfeyr Tygjx Agfsr Stator knives: 2 rows Infeed opening approx. 600 x 1000 mm Drive motor: 45 kW

Condition: used, machine/vehicle number: 4922, Rotor diameter: 200 mm Rotor width: 270 mm Gisdoyr Tyaopfx Agfsr Rotor knives: 3×6 Stator knives: 2 Infeed cross-section approx. 200 x 270 mm Drive motor: 3 kW

Condition: used, machine/vehicle number: 4966, Rotor diameter: 200 mm Rotor width: 180 mm Rotor blades: 3×4 Stator blades: 2 Gedsyr Tx Njpfx Agfjir Feed opening approx. 200 x 180 mm Drive motor: 3 kW

Condition: new, Manufacturer: SIEMENS Gsdpfx Ajd Tktfogfoir Typ: IE3 380 V; 61 A; 18,5 kW; RPM: 1470/min

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC Turning and Milling Center | EMCO MaxxTurn 45 Gsdpfeyzy Ausx Agfeir Manufacture of complete turned parts, diameter range 6 – 40 mm and length 10 – 150 mm Control FANUC 18i-TF, main and counter spindle, travel X/Y/Z = 160/+40/-30/510 mm, 12-position tool turret with live tooling VDI 25, max. speed 6,000 rpm, material ejector, remote control, - Bar feeder TOP etl 8-50, year 2018, S/N 95692, L = 5,000 mm Inspection possible at any time by appointment.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC Turning and Milling Center | EMCO MaxxTurn 65 Production of complete turned parts, diameter range 10–65 mm and length 10–200 mm Gsdpjyzywxsfx Agfsir Control: FANUC 31iB, power 29 kW, main and counter spindle, maximum spindle speed 5,000/7,000 rpm, travel paths X/Z = 260/610 mm, 12-position tool turret with driven tools (VDI 40), max. turning diameter/length = 320/550 mm, workpiece ejector Inspection possible at any time by arrangement.

Condition: used, Year of construction: 2015, machine/vehicle number: PWA-201511051N, spindle speed (max.): 1,300 rpm, spindle speed (min.): 40 rpm, Universal milling machine with accessories Giodpfx Asyxl Rlogfor