Used Minarctig 180 for sale (10,304)

Condition: excellent (used), Side mills Iedpfx Aajlvt Eqenstr Zerma Year of manufacture 2005 Type: GSL -18AMIS)

Year of construction: 1990, condition: ready for operation (used), Center width: 1000mm, turning diameter over bed/crank/trolley: 360mm/510mm/205mm, spindle bore: 42mm, speed: 2100rpm, machine dimensions X/Y/Z: approx. 1950mm/900mm/1350mm, weight: approx. 750kg. On-site inspection is possible. Itedpfx Aewt Tlmsanor

Condition: refurbished (used), functionality: fully functional, load capacity: 150 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Iodpferwnphex Aanjtr Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Year of construction: 2024, condition: new, Beside the press granulator Rotor diameter (mm) 180 Rotor width (mm) 180 Rotor speed (rpm) 150 Drive capacity (kW) 3 Rotor knives (pcs) 18 Stator blades (rows) 2 Screen size (mm) >5 Weight approx. (kg) 140 The slow speed granulators in the GSL range are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. The machines can be used for rejected products in the inline recycling process as well. Different hopper and base frame designs make it possible to integrate the machine with most types of injection molding machines and robots. Driven by gear motor or V-belt Ijdpfx Aasiy D Szjnjtr Unique knife design eliminates adjustment after resharpening. Simple tool less access for maintenance and cleaning Customizable hopper and base frame

Condition: used, Year of construction: 2012, Transnorm curved belt conveyor left bend 180°-650-500 IR600 RA2398 Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 650 mm belt width (GB): 500 mm innerradius (IR): 600 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor Electrical Data: 380-500 V, 0,37 kW Conveying speed: 0,5 m/s Scope of delivery: without supports (if required, please contact us) Optional: Isdpfx Aaswct Sxonstr supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 96123, Connected load 380V 46A planing width 180 mm planing height 120 mm Isdpfx Aeh U Db Ieanjtr length of table 2300 mm 4x Leitz reversible knife heads with 4 knives each 2x feed speeds electric height adjustment 4x star-delta switch 2x low pressure holder 1x side pressure holder 2x steel feed shafts 1x rubberized pull-out roller Suction connection 4x120 mm

Condition: good (used), Year of construction: 1982, Table width 1.8 m Iedpfxsvi Iime Aanotr Strokes per min. 30 - 150 Weight 47.000 KG

Condition: ready for operation (used), A profile hardening system (inductor) AEG-Elotherm Elomat V/N/180/3 is available. The nominal output is 200kW. The system is fully functional and is offered including various coils. Itsdpfx Aajttv Trsnsr

Condition: refurbished (used), functionality: fully functional, load capacity: 210 kg, controller manufacturer: Kuka, controller model: KRC4, warranty duration: 12 months, PRICE ON REQUEST! Price on request: - The price for the products offered is not stated directly, but must be requested. Condition of the products: - The products on offer are used, but they have been completely overhauled and all wearing parts (O-rings, precision bearings, shaft seals, screws, circlips, Castrol oil) have been replaced. Measurements and tests: - Precise measurements were carried out, particularly in the area of axles and gearbox clearances. An 8-hour load test was also carried out. (Gearbox play axle 4 - 0.01 / axle 5 - 0.01 / axle 6 - 0.01). Delivery and packaging: - The products are delivered in a special box and shipping is insured. Central hand replacement: - It is possible to receive the central hand in exchange. Alternatively, it can also be purchased without an exchange on request. Warranty: - Each central hand comes with a 12-month warranty. It is possible to extend this to 18 months for an additional charge. Stock: - The supplier has more than 100 central hands in stock, various models are available. Express overhaul: - A quick overhaul of KUKA central hands is offered, which takes place within 48-72 hours of delivery. Repair service: Itodpfxerqf Tko Aanjr - In addition to the products offered, there is also a repair service for ABB wrists. Repair and maintenance of industrial robots: - Is your industrial robot experiencing problems such as oil leaks, high gear backlash, crash damage or significant wear? Our experienced repair and maintenance service is at your disposal! Our services at a glance: Repairing oil leaks: - We identify and eliminate leaks, replace seals and ensure reliable sealing. Reduce gearbox backlash: - Through precise measurement and adjustment, we minimize gearbox backlash to ensure optimum performance. Crash damage repair: - After collisions, we carry out a comprehensive analysis, replace damaged parts and restore full functionality. Wear reduction: - All worn components are carefully replaced to extend the life of your robot. Wrist repair for various brands: ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and many more brands. Why you should choose our services: - Experienced team of robotics experts - Fast diagnosis and repair - Use of high-quality spare parts - Customer satisfaction is our top priority Our services include the repair of all wrists from leading brands such as ABB, Yaskawa, Hyundai, Fanuc, Kawasaki, Nachi and more. We only sell in exchange. The sales price already includes VAT. On-site collection by appointment only. Contact us today for individual advice and a quote. We specialize in restoring your industrial robots to top condition! If you require further information or are interested in a product, we recommend contacting the supplier directly and sending an inquiry directly to "vertrieb(at)robotic-refit.de".

Year of construction: 2024, condition: new, Slow-speed, side-by-side granulator Rotor diameter (mm) 180 Rotor width (mm) 180 Rotor speed (rpm) 150 Drive (kW) 3 Number of rotor blades 18 Number of stator blades 2 Screen perforation (mm) >5 Approx. weight (kg) 140 The slow-speed side-by-side granulators of the GSL series are primarily used in injection molding and blow molding for the inline reduction of sprues and defective parts. Various hopper and extraction systems allow the machines to be flexibly integrated into existing installations. Itodpfx Aasqmik Ienor GSL 180 For the comminution of sprues from injection molding and blow molding Highlights of the GSL series: Low noise thanks to the low rotor speed, angled cut, and soundproof hopper in a multi-layer sandwich design. Powerful and efficient drive thanks to a brand-name gearbox. Easy maintenance, cleaning, and knife replacement. The slow-running, stand-alone granulators of the GSL 180 series feature a closed rotor with a diameter of 180 mm. The machines are available in working widths from 120 mm to 430 mm. The rotor consists of individual discs directly connected to the spur gear unit via an oversized drive shaft. This enables efficient and low-maintenance power transmission. The material to be crushed can be fed by hand, by conveyor belt, or by robot via a generously dimensioned, soundproof hopper in a sandwich design. The granulator is mounted on a low base frame on casters as standard. The mill is emptied via an extraction tray inserted beneath the screen with a pipe connection for a suction conveyor. Applications The slow-running, stand-alone mills of the GSL 180 series were specifically developed for the size reduction of sprues from injection molding and blow molding. Easy accessibility allows for quick color and material changes. The low rotor speed also allows for the processing of both soft and hard materials, ensuring good material quality with low dust content.

Condition: used, Year of construction: 2021, Transnorm belt curve conveyor right GKF 180°-1270-1100-IR1200 RA1946 Technical data: Conveying length middle radius (NL): 5498 mm Frame width (NB): 1270 mm Frame width with Bearing cover: 1390 mm Frame width with Bearing cover and gearbox: 1480 mm belt width (GuB): 1100 mm height (BH): 250 mm height motor below: 300 mm height including motor (MH): 550 mm Inner radius (IR): 1200 mm Conveying angle: 180° degrees middler conveying speed (v m/s): 1,4m/s Drive: SEW motor motor with frequency converter Electrical data: 50Hz V380-500, kW 3 / S1 Belt: KT 96 Year of construction: 2021 Height Sideguides: 194 mm Optionally available: Supports Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Itjdpfx Aaev Ir S Asnjr For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: excellent (used), Here we offer a climate test chamber. Climate cabinet RS SIMULATORS KS600/70 AIR COOLED Climatic test chamber -70/180°C + humidity Last maintenance and leak test carried out 03/2024 by RS simulators Here we offer a climate test chamber. RS climate test chamber air-cooled Refrigerant: R404/R23 Temperature range -70°C to + 180°C Time deviations +/- 0.5 K with empty test chamber Average heating and cooling time approx. 2 K / min Humidity range 10% to 95 % Itodpfxjvu Ui Ro Aanjr External dimensions: width 1200 mm depth 1600 mm x height 1995 mm Test chamber dimensions width 840 mm x depth 840 mm x height 840 mm Nominal voltage: 3/N/PE AC, 400 V, 50 Hz Nominal power: 7.5 KVA Nominal current: 15 A Fuse, on-site: 16 A slow-blow Side feedthrough Cabinet is air-cooled Refrigerant R-404A/R23 Weight approx. 600 kg Type: KS 600/70

Condition: used, Year of construction: 2015, Transnorm curved belt conveyor left bend 180°-700-600 IR750 RA2329 Itodpou S I Rkefx Aanor Technical data: Manufacturer: Transnorm Condition: good (used) conveying angle: 180° nominal/external width (NB): 700 mm belt width (GB): 600 mm innerradius (IR): 750 mm overall height (BH): 210 mm motor height (MH): 450 mm Motor type: SEW gear motor, SA37/T DRS71M4/TH Electrical Data: 380-500 V, 0,55 kW Conveying speed: please contact us Scope of delivery: without supports (if required, please contact us) Optional: supports Side guides Frequency converter for stepless speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, Year of construction: 2020, Transnorm belt curve conveyor left GKF 180°-800-700-IR200 - Exhibition machine RA2317 Technical data: Frame width (NB): 800 mm, 2000 mm Diameter Frame width with Bearing cover and motor: 2200 mm Diameter belt width (GuB): 700 mm height (BH): 200 mm height with motor (MH): 350 mm Inner radius (IR): 200 mm Conveying angle: 180° degrees Conveying speed (v m/s): 0,38-1,14 m/s Drive: Nord gear Motor with Frequency converter for stepples speed controll Iedpfxevadkne Aanotr Electrical data: 50Hz V380-500, kW 0,37 / S1 Year of construction: 2020 Incl. support, current height 820mm Optionally available: Supports, if deviating from the current height Sideguides Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1994, Transnorm roller curve conveyor right 180°-770-700 IR 800 RA2350 Technical data: Manufacturer: Transnorm Type: TS 2712 curved belt 180° RIGHT Built: 1994 Condition: good (used) Engine: fully functional Angle: 180° Inner radius RN: 800 mm (nominal radius) Outer width: 770 mm Clamping length: 700 mm Side guide: inside and outside Engine Type: SEW Gear Motor + MOVIMOT Inverter Engine Power: kW 0.37/0.075 S1 Hz 50 A 1.30 Drive: Center drive Conveyor speed: adjustable from 0.1 to 1.0 m/s Weight: 210 kg Optionally available supports side guides Frequency inverter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Ijdpjvu Ihtjfx Aanstr Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 180 Production capacity: 180 m3 Mixer type: Twinshaft – 4.5 m3 Aggragate bunker: 5x30 m3 Cement weighing: 2000 kg Additives weighing: 2x50 kg Water weighing: 1000 lt Cement silo is optional. COMPACT 180 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder Itjdpjx Izvvofx Aansr • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, mileage: 50 km, power: 130 kW (176.75 HP), fuel type: diesel, empty load weight: 2,540 kg, maximum load weight: 1,585 kg, overall weight: 4,200 kg, tire size: 205/75 R17,5, axle configuration: 2 axles, wheelbase: 3,750 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, onboard computer, truck registration, | Iveco Daily Chassis NEW VEHICLE!! | Automatic, EURO 6 | Twin rear wheels | Air suspension on rear axle | Air conditioning, electric windows, heated electric mirrors | Radio/CD, roof hatch, spare wheel holder | Frame length: 4.20 m | Wheelbase: 3750 mm | Digital tachograph, reversing camera | Equipment list available on request | Technical GVW: 4200 kg | Subject to errors, input mistakes, and prior sale. Ijdpfsvz Aubjx Aanjtr

Condition: used, Year of construction: 2004, operating hours: 90,627 h, functionality: fully functional, clamping force: 180 kN, screw diameter: 18 mm, For sale is an injection molding machine of the brand Arburg and the type 170U 180-70 The machine is fully functional and ready for immediate use Technical data Year of construction: 2004 Operating hours: 90,627 h Cylinder Ø 18 mm Clamping force: 180 kN Valve gate: Pneumatic Internal pressure transducer Isdsu Hqg Tspfx Aanjtr On request, transportation and loading can be organized at extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2008, functionality: fully functional, Machine Name: Hydraulic Tire Vulcanizing Press with Two Stations 2. General Information Manufacturer: Harburg-Freudenberger Maschinenbau GmbH (Rubber Technology Division) Model / Type: KHP 52-180 Year of Manufacture: 2008 Order Number: 70 825 00 225 Station Identification Left Station (Serial Number): 4L Right Station (Serial Number): 4R Control Interface System: Rockwell Automation / Allen-Bradley PanelView Plus 700 Control Elements: Integrated physical pushbutton panel 3. Technical Data / Specifications - Configuration: Vertical hydraulic curing press with two chambers Pressure Values Maximum Pressure: 240.2 bar Test Pressure: 343.8 bar Test Date: January 2008 Electrical Cabinet - Designation: Cabinet D11 Inventory Labels: "4019311" / "99" Hydraulic System - Unit Configuration: Rear-mounted green hydraulic tank and manifold system - Components: Rexroth hydraulic valves and gauges (visibly installed) Loading Mechanism - System: Automatic loading system for green tires Itsdpfjx I Dyqox Aansr - Mold Handling: Segmented mold handler Auxiliary Control System - Control Panel: Secondary pneumatic/hydraulic valve control panel - Manufacturer: Rockwell Automation - Installation Location: Mounted at belt conveyor infeed

Year of construction: 2024, operating hours: 10 h, condition: like new (used), functionality: fully functional, Dilara 180 Refrigerated Display Case Circulating air refrigerated display case 4 reinforced stainless steel shelves Sliding doors made of insulated glass Temperature adjustable from +3 to +15°C Iedpfxex I U Hho Aanstr Refrigerant R 290 DGUV V3 tested exclusively by us Dimensions: 1800 x 750 x 2000 mm (WxDxH) Connection: 230V, 1166 Watt Demonstration unit & SAB tested With warranty & spare parts service Option: Maintenance contract Delivery service Service package Instruction & commissioning

Condition: used, Year of construction: 2021, operating hours: 177 h, Please contact ATS Norway for more information Please provide reference number upon request: 19184 Specifications: - Hours: 177 - 90 km - 8-wheel drive? - Good tires - Automatic box - With front screen - Lots of extra light - Radio/Cd - Climate/ac - Diesel - With belts Worl Power Er-180 000L-8 crane 180 t/m from 2016 Itjdsvg At Iopfx Aaner   Superstructure: - Supportlegs - Extra light - Quick attach - Reversing camera - Central grease Hours: 177

Condition: good (used), Technical specifications for the leveling plate: Manufacturer: Polypal Included in delivery: 1x Leveling plate, used Material: Plastic Total width: approx. 180 mm Itsdownaphopfx Aaner Total depth: approx. 130 mm Material thickness: approx. 2.0 mm Drill hole diameter: approx. 15 mm Number of drill holes: 1 Weight: approx. 0.040 kg Your contact person in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested separately depending on the delivery location and scope of delivery.

Condition: used, Year of construction: 2009, operating hours: 19,584 h, functionality: fully functional, machine/vehicle number: 943883, overall weight: 1,455 kg, load capacity: 180 kg, arm reach: 3,300 mm, This is a KUKA KR 180 R3300-K industrial robot Year of manufacture 2010 Itodpfx Aajti Afconer We are also happy to offer you this robot refurbished! This robot includes the following options: UserTech

Condition: used, Year of construction: 2003, operating hours: 71,732 h, functionality: fully functional, clamping force: 180 kN, screw diameter: 25 mm, For sale is an injection molding machine of the brand Arburg and the type 170 U 180-70 The machine is fully functional and ready for immediate use Technical data Year of manufacture: 2003 Hours: 71.732 h Valve gate: Pneumatic Screw: Ø 25 mm Clamping force: 180 kN Core pull Internal pressure transducer On request, transportation and loading can be organized at an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Itsdpfx Aeu Hqg Hjaner Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2005, operating hours: 67,200 h, clamping force: 180 kN, screw diameter: 30 mm, For sale is an injection molding machine of the brand Arburg and the type 170 U 180-70 The machine is in a technically good condition and has been fully functional and professionally dismantled Technical data: Year of construction 2005 Machine no.: 198067 Clamping force: 180kN Operating hours: 67,200 Isdpfxjtwadvj Aanjtr Cylinder: D30mm Distance between tie bars: 170 mm Dimensions: 2.690*889*1831 Weight: 1,650 kg Selector switch and conveyor belt included in the offer Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website