Used Polyester Granules for sale (897)

Condition: ready for operation (used), A complete UPG system for polyester resin granulate production is available. 1) High-speed Henschel fluid mixer FM 350C, speed: 1500 rpm, heating unit: Lauda. 2) Raw material supply system with 6 bunkers, screws and vibrating chutes. 3) Conveying system with a collecting tank located 9m above the mixer and a Demag 4t rope hoist. 4) Schenk fluidized bed cooler. 5) Engelsmann ED 250/4 flat bed screen. 6) Alpine B40/63 RO granulator. 7) 2 annular gap compactors Siemens. 8) 2 Kessler & Luch blowers, volume flow: 7000m³/h. 9) Aerobic filter, filter capacity: 4000m³/h. Documentation available. On-site inspection is possible. Itodpfjwk Nk Tjx Ahnjl

Year of construction: 2007, condition: used, functionality: fully functional, The ELDAN FG952 is an industrial, high-speed, single-shaft granulator designed to further reduce the size of materials after primary shredding, down to a specified granule size. The material is fed into the cutting chamber, where a rotating rotor with moving blades interacts with stationary blades. The granulated material passes through a replaceable screen, allowing for the selection of the desired final fraction size. The unit features an adjustable blade gap, multiple blade sharpening options, easy blade replacement, and a hydraulic opening for the feed hopper, which facilitates access to the cutting chamber during maintenance. Replaceable wear parts and screens with different hole sizes are used. Electric motor power: 75 kW / approximately 100 HP Rotor length: 950 mm Rotor speed: 475 rpm Moving ("flying") blades: 12 pcs. Stationary blades: 4 pcs. Capacity up to 3,500 kg/h Approximate weight 4,400 kg Length: 1,940 mm Width: 1,960 mm Height: 2,800 mm Motor rated speed: 1,480 rpm Standard electrical grid: 3 phases, 400 V, 50 Hz The FG952 can be used to granulate various materials, including: Iodpfxez Dgrvo Ahnotl tires and rubber; electrical and other cables; aluminum scrap; plastics; various secondary raw materials after primary shredding.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 20,000 h, functionality: fully functional, overall weight: 15,000 kg, rotor diameter: 500 mm, rotational speed (max.): 200 rpm, power: 90 kW (122.37 HP), input voltage: 400 V, type of input current: three-phase, The MeWa Universal Granulator UG 1000 is a high-performance, stationary single-shaft secondary shredder, specifically designed for the fine shredding and recycling of various composite materials and waste. The machine operates according to the principle of a guillotine shear, in which the material is cut between rotating and stationary blades. Drive power: 90 kW Cutting chamber / working width: 1,000 mm Number of blades (rotor / stator): 25/5 blades Itedpfx Ahoz Antuensl Rotor diameter (circle of rotation): 500 mm Total weight: approx. 15 tons Screen size: Flexible, interchangeable screens under the rotor determine the final particle size (typically between 10 mm and 80 mm).

Year of construction: 2014, condition: used, functionality: fully functional, Fully functional Cable recycling machine with 7,5kW cutting mill and dry sorting table. Isdez Ag E Aopfx Ahnetl

Year of construction: 2000, condition: ready for operation (used), A complete Hosokawa mill for processing polyester resin lumps is available. Complete plant: Feed material: polyester resin, max. feed grain size (dry): 800mm/600mm/20mm-30mm, fineness: below 1.5mm, round hole diameter: 15mm, plant capacity: approx. 3000kg/h, analysis method: Alpine air jet screen 200 LS-N. 1) Alpine single-shaft shredder type A 1500P, feed hopper opening: 2030mm/1440mm, feed hopper volume: 2.5m³, working width: 1500mm, knife circle: 300mm, rotor speed: 100rpm, motor power: 37kW, machine dimensions X/Y/Z: approx. 2100mm/2200mm/2300mm, weight: approx. 3500kg. 2) Automatic dedusting filter AE 48 L, filter surface: 42m², filter bags: Needle felt 550g/m². 3) Alpine Compact-Line granulator 45/100 CL, cutting tool rows: 4, min. hole width: 3mm, required power: 55kW. Including extraction system, conveyor system and accessories/peripheral equipment. Documentation available. On-site inspection is possible. Iodpfx Ahovdu N Asnotl

Year of construction: 1999, condition: good (used), functionality: fully functional, Suite arrêt de production, ligne complète de granulation pour matières plastiques comprenant trémie de chargement, vis de chargement, Extrudeuse monovis diametre 105 avec vis forceuse, doseur, puit de dégazage, pompe à vide, filtre à tiroir avec groupe hydraulique, bac inox de refroidissement, sécheur de joncs, granulateur Buhler, tamis vibrant Avitech, soufflerie, cyclone et porte big bag. Vis et fourreau refait en 2021 (facture). Pupitre de commande refait. armoire électrique complète. La vis a un profil généraliste qui permet de regranuler du PE, PP, PS, ABS et PA principalement. Itsdpfxou E E Ezs Ahnel

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 041-03, Stock No. 2834 TECNOVA mini 60 granulation system, partially overhauled, in working order, ready for demonstration, consisting of: Itsdez A Ti Ejpfx Ahnol Material feed hopper Stuffing unit TECNOVA single-screw extruder with 60 mm screw – 36 L/D – cylinder, air-cooled 1 degassing unit with vacuum pump Extruder drive 30 kW, screw speed up to 200 rpm Melt filter/screen changer Hot-face granulator, complete with die plate and knife bar Granulate/pellet blower Control cabinet, relay control A test run/sample production with your material can be arranged on short notice; details and schedule upon request. OPTIONALLY, the system can also be equipped with strand granulation; details upon request. Further granulation systems/extruders ready for demonstration are available ex-works Wuppertal.

Year of construction: 2009, condition: used, Complete cable recycling plant for sale – including MG Recycling Compact 220T (in excellent condition) For sale is a complete cable recycling plant (dry process) for the efficient recovery of copper from cables. ⭐ Core component of the plant: MG Recycling Compact 220T (year of manufacture 2009) Itedezgx H Hjpfx Ahnel * Industrial compact system for separating copper, aluminum, and plastic * Capacity: up to 400 kg/h * Power consumption: approx. 37 kW * High-quality granulation & separation * Very robust design (approx. 3.2 t machine weight) ➡️ Proven system for cable recycling with high purity and reliable continuous operation. ⸻ ⚙️ Other components of the plant: * Large screening system (TST – separation & sorting technology) * Additional separation table for post-separation * Various conveyor belts & screw conveyors * Large two-shaft shredder for pre-shredding * Cable stripping machine The components from TST are specifically designed for industrial separation and screening processes and enable very precise classification and purification of materials. ⸻ Performance data of the complete plant: * Throughput: approx. 200–300 kg of cable per hour (realistic in operation) * Recovery: up to 99% copper content * Process: completely dry (no water, no sludge) * Ideal for: * Copper cables * Electronic scrap * mixed cable batches ➡️ Very efficient post-processing through additional screening and separation tables → maximum yield! —————- Special features: * Completely coordinated production line – ready for immediate use * Expandable / modular design * Perfect for commercial cable recyclers & recycling companies * Energy-efficient separation technology without wastewater —————- Condition & sale: * Plant is in good condition and currently in operation * Sale due to operational restructuring * Inspection possible by appointment —————- Price: Negotiable – realistic offers welcome

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3514, functionality: fully functional, power: 25 kW (33.99 HP), input voltage: 400 V, total length: 5,000 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 3,000 kg, KOCH CKT-300 Granulate Drying System Iedpjzvl H Ssfx Ahnstl - including piping and 6 associated containers Note: The item must be picked up on a fixed date between September 1st and September 3rd, 2026; the exact date will be confirmed. FCA D-58507 Lüdenscheid - loaded onto a truck.

Year of construction: 1981, condition: used, Empty weight: 8.300 kg Aulmann & Beckschulte rubble crusher Type: UF 400x1000 Year of construction: 1981 dimensions: 4700mm x 1600mm x 2800mm (LxWxH) feed opening: 600mm x 430mm Iodpfx Ahszry T Eonotl Motor: 50HZ 420V 55KW 95A Will be dismantled by us. - Year: 1981 - Documentation available: No - CE certificate present: No - Transport weight [kg]: 8300kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2009, functionality: fully functional, overall weight: 50 kg, type of input current: AC, input voltage: 230 V, total height: 540 mm, total width: 260 mm, total length: 500 mm, power: 0.5 kW (0.68 HP), Equipment: type plate available, We are offering this used Collin Teach-Line CSG 171 T pelletizer, manufactured in 2009, for sale. Type: Teach-Line CSG 171 T 20 m/min 1-3 simultaneous feed intakes Maximum diameter: 4 mm 0.5 kW 230 V Year of manufacture: 2009 Very good condition, cutting blades show no discernible wear. If you have any questions or require further information, please do not hesitate to contact us. Ijdpezy U Ugjfx Ahnstl

Year of construction: 1995, condition: used, functionality: fully functional, GETECHA RS 303‑A 60.11 plastic shredder, granulator 11 kW GETECHA RS 303‑A 60.11 type central plastic shredder, granulator with built-in exhaust fan. Manufacturer: GETECHA Type: RS 303‑A 60.11 Date of manufacture: 1995.12 Rotor cutting circle diameter: 340 mm​ Iedpfsyf E N Tex Ahnstl Cutting width: 300 mm​ Number of rotating knives: 3 pcs Number of fixed knives: 2 pcs​ Cutting chamber opening: 300x440 mm Main motor power: 11 kW​ Speed: cca 300-400 1/min​ Screen opening (standard): 6–8 mm, round​ Average capacity: 200–360 kg/h Feeding height: 1750 mm Overall dimensions (WxLxH): 1500x2000x2170 mm Built-in exhaust fan: Manufacturer: Elektror Karl W. Müller GmbH & Co. Voltage: 230/400 V, 50 Hz, three-phase.​ Power: 3.1 kW​ Speed: 2830 rpm Volume flow: 2760 m³/h

Year of construction: 2023, condition: used, functionality: fully functional, THM Recycling Solutions Granulation System Plastics Shredder, Granulation and Washing System comprising THM Recycling Solutions granulation unit with: THM FR300/235/215-25-7500 inlet belt conveyor (2024) THM ZM 1000 granulator (2023) THM FR300/235/215-25-7500 outlet belt conveyor (2024) HAG HA-SNP-P-20-14-0-7.5 hydraulic unit,12 bar Pierret guillotine cutting system with: Isdpezhudwofx Ahnetl Pierret G35RI guillotine cutting machine Pierret G28RI guillotine cutting machine 2x belt conveyors for infeed and outlet

Year of construction: 2017, condition: ready for operation (used), Granulator THM ZM 600 / MeWa UG 600 Drive power: 55 kW Rotor length: 600 mm Rotor diameter: approx. 480 mm Number of knives: 18 rotor knives and 3 stator knives Rotor speed: The machine can operate at 4 different speeds if required: 257 rpm / 317 rpm / 343 rpm / 422 rpm. Itjdezhg Eyjpfx Ahnel Weight: approx. 5500 kg Control cabinet brand new (original from THM recycling solutions GmbH) Hydr. feed pressure device (HNDE), feed hopper, Available from approximately the end of August.

Year of construction: 1995, condition: good (used), functionality: fully functional, Bausano complete granulating line, including generator. Output: 350-400 kg/h. Ijdpfx Ahjzcarqenotl

Condition: good (used), Year of construction: 2013, 1x Digicolor dryer, as shown in the pictures. Isdpfx Aozx D H Ajhnjtl

Condition: good (used), Year of construction: 2015, 1x Digicolor dryer, as shown in the pictures. Itjdpjzx D Iasfx Ahnjl

Year of construction: 2006, condition: refurbished (used), functionality: fully functional, We are offering this refurbished MG Recycling M_04772 cable granulator, manufactured in 2006. It underwent a major overhaul in 2024. New switchgear control cabinet, new knife sets. Wagner pre-shredder, type WS 15, manufactured in 2007, 15 kW. Feed conveyor, extraction system, and magnetic vibrating table, manufactured in 2021. Output: approximately 150 - 180 kg/hour, depending on the material. Itedpfx Aoy D Ug Tjhnel Location: Switzerland, 8260 Stein am Rhein. Asking price: EUR 59,000 (negotiable) If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, For sale are 3 Erema regranulation systems. The nameplates and details can be seen in the photos. Inspections can be arranged by appointment. Itedpfezx D U Hsx Ahnsl

Condition: like new (used), Year of construction: 2024, operating hours: 490 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, COMPLETE MINERAL MASTERBATCH PRODUCTION LINE – PELLETIZING PROCESS High-concentration mineral masterbatch • Turnkey industrial installation • Spain ASKING PRICE: XX.XXX + VAT | COMPLETE LINE ONLY A complete production solution Complete industrial installation designed for the production of highly concentrated mineral masterbatch. The line integrates raw material handling, weighing/dosing, high-speed mixing, conveying, pelletizing, screening, and bagging into a single, coordinated system. The equipment is offered as one complete lot, dismantled and available for relocation. Capacity Approx. 750–850 kg/h* Operating hours Maximum 490 h Mixer 500 L / 300 L usable / 75 kW Pelletizer 350 mm / 37 kW Automation Siemens S7-1200 PLC Power supply Includes 200 kVA Perkins generator Integrated process RAW MATERIAL FEEDING → AUTOMATIC WEIGHING/DOSING → HIGH-SPEED MIXING → TRANSFER → PELLETIZING → SCREENING → BAGGING Why this line is attractive • Complete and integrated: avoids the engineering and integration work involved in sourcing the equipment individually. • Very low operating hours: maximum recorded operating time is 490 h. • Industrial-scale mixing: 500 L mixer with 75 kW drive and variable-speed control. • Automated dosing and control: Siemens S7-1200 PLC architecture with weighing and recipe-management functions. • Relocatable asset: installation is offered dismantled, making it suitable for transfer to another industrial site. Itedpez Aibajfx Ahnjl *Capacity is an approximate figure based on the installation configuration and intended application; actual throughput depends on formulation, operating conditions, and product specification.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Itsdpfex It N Usx Ahnol Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Itodpfszb Dp Rex Ahnel Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Inspection in Wuppertal, appointment available on short notice.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 – UNIVERSAL MIXER GRANULATOR / PHARMACEUTICAL GRANULATOR For sale: DIOSNA V50 Universal Mixer Granulator in exceptionally good used condition. The machine is manufactured with high-quality stainless-steel components and is equipped with a bottom-mounted three-blade mixing tool and a high-speed side chopper. The product-contact area, and especially the interior of the processing vessel, is in outstanding condition. The vessel, mixing tools, and stainless-steel surfaces are exceptionally clean and show very little sign of wear. TECHNICAL DATA Manufacturer: DIOSNA Dierks & Söhne GmbH, Germany Model: V50 Machine No.: 383-001 Year of manufacture: 2007 Usable bowl capacity: 46 liters Electrical supply: 400 V / 50 Hz Rated power: 6.5 kW Rated current: 15 A CE marked Ex / ATEX marking according to machine nameplate MIXING / GRANULATION SYSTEM The DIOSNA V50 combines intensive mixing and granulation in one compact processing machine. The processing vessel is equipped with: - Three-blade bottom mixing / granulating tool - High-speed side chopper - Stainless-steel processing vessel - Large side discharge system - Hinged stainless-steel vessel lid - Inspection window in vessel lid The combination of the bottom mixing tool and side chopper provides intensive product circulation and is suitable for mixing, granulating, agglomerating, and breaking down oversized product particles. CONTROL & EQUIPMENT - Siemens SIMATIC Touch Panel - Integrated stainless-steel control cabinet - Emergency stop - Key-operated control switch - Additional process control/display unit - Clean-air connections/control - Nitrogen connections/control - Mobile design on castors - Stainless-steel construction - Additional filter elements / accessories as shown in the photographs APPLICATIONS Suitable for applications including: - Mixing and homogenization of powders - Wet granulation - Agglomeration - Preparation of pharmaceutical granules - Breaking down oversized agglomerates - Pharmaceutical and chemical processing - Pilot and small production batches CONDITION Exceptionally good used condition. The interior of the processing vessel is remarkably clean and appears to have seen very little use. The mixing tool, chopper, and product-contact surfaces are also in excellent condition. The photographs show the actual machine offered for sale. INSPECTION Inspection and demonstration by appointment at our premises in: 4226 Breitenbach Switzerland Itodpfxezxq U Hj Ahnsl Worldwide delivery can be arranged. Further technical information and additional photographs are available on request. CYCRON GmbH Switzerland Subject to prior sale and errors.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 332/18, Plastic regranulation line prepared for processing both film flakes and regrind. Machine capacity: 800–1200 kg, depending on the material. Equipment: 1. Forced feeder 2. 160/54D extruder with two independent degassing zones 3. Cutting system on head, model OR1000 4. Centrifugal dryer 5. Vibrating sieve 6. Additional plasticizing unit (screw + cylinder + feed hopper) Not included in the offer: 1. Automatic mesh filter GB1000 (equivalent to Britas ABMF1050-09) Ijdpfxoy N T Uyo Ahnetl

Year of construction: 2019, condition: ready for operation (used), Wittmann MAS 2 Granulate Mill / Cutting Mill / Grinder / Granulator, Plastics, 2019 Grinding chamber: 247 × 255 mm Cutting motor: 4 kW Year of manufacture: 2019 Weight: 220 kg Serial number: WTM10776 You are welcome to arrange a viewing. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice (excluding VAT) can be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. Iedpfx Ahjyw H Uijnstl Specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations in technical data or errors in the description of the item may occur and are subject to change.