Used Minarctig Evo 200 for sale (17,184)

Year of construction: 2019, condition: used, functionality: fully functional, machine/vehicle number: 9300000000080823, We are offering this used Bertrand Puma spiral mixer, model SPI A 200, with 2 removable bowls, manufactured in 2019. Serial number: 930000080823 Date of manufacture: 06/2019 Weight: 1220 kg Bdodpfoz D Ncwjx Andji Voltage: 400 V Frequency: 50 Hz Current: 28.00 A Power: 10.10 kW If you have any questions or would like more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MV0083-000047, overall weight: 5,500 kg, DOOSAN DNM 200/5AX – CNC 5-axis machining center – Year of manufacture 2015 For sale is a well-maintained DOOSAN CNC machining center, model DNM 200/5AX, in very good condition. Technical data: Year of manufacture: September 2015 Travel distances X / Y / Z: 400 / 435 / 500 mm Spindle speed: up to 12,000 rpm Spindle power: 18.5 / 11 kW Rotary table diameter: 200 mm Bdjdpfx Ane Ahkdqedei A-axis: +30° to −120° C-axis: 360° Rapid traverse rate X / Y / Z: 36 / 36 / 30 m/min Machine weight: 5,500 kg Connection: 380 V, 50/60 Hz

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 5,150 mm, total length: 16,000 mm, total height: 4,850 mm, temperature: 2 °C, We are offering this like-new Heidinger I-1751 refrigerated storage room, manufactured in 2023. Type: I - 1751 Year of manufacture: 2023 Double refrigerated storage room, 2-8°C (unused) Each with a Viessmann double door, 2m x 2.7m Redundant design Internal dimensions approximately 16m (L) x 5.15m (W) x 4.85m (H) each Walls made of 100mm sandwich panels No separate floor, therefore accessible with a forklift Compressors: 4x Bitzer Ecostar LHV5E/2DES-3.F1Y-40S Evaporators: 4x Güntner GACC RX 040.1/2WN/DJA4A.UNNN The refrigerated storage room was built for storing medication and has never been put into operation after acceptance by the manufacturer. The pallet racking shown in the pictures is not included in the offer. Dismantling and transport are the responsibility of the buyer. If you have any questions or require further information, please do not hesitate to send us a message or call us. Bsdpfx Anjykrtpjdjdi

Condition: used, Year of construction: 2014, Sanding belt dimensions: 150 x 2000 mm Contact wheel width/diameter: 200/200 mm Sanding belt speed: 14.5/29 m/s Drive motor: 380 V, 2.1/2.8 kW Space requirement: 1070 x 530 x 1130 mm Weight: 110 kg Bdjdo Ahp Huspfx Andoi

Condition: used, Year of construction: 2014, operating hours: 21,950 h, functionality: fully functional, turning length: 669 mm, turning diameter: 330 mm, spindle bore: 88 mm, spindle speed (max.): 3,400 rpm, overall weight: 5,700 kg, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, - Siemens 828 - Main spindle 3,400 rpm - Siemens motor - 12-position Sauter turret for 12 driven tools Bjdpfoyzr Trsx Andjdi - Tool holder VDI 40 - 3-jaw chuck Ø 250 mm - C-axis - Chip conveyor - Coolant system and through-spindle coolant (IKZ), 20 bar - Work area lighting - Foot pedal for power chuck - CE certification

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: iTNC 530, table load: 900 kg, rotary table diameter: 600 mm, rotational speed (max.): 50 rpm, overall weight: 9,000 kg, spindle speed (max.): 14,000 rpm, coolant supply: 40 bar, spindle motor power: 32,000 W, spindle nose: SK40, number of spindles: 1, number of slots in tool magazine: 40, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis machining center with proven Heidenhain iTNC530 HSCI, M&H workpiece probe, 40 bar internal coolant supply with belt filter The machine is still under power and can be inspected near Straubing. Spindle hours: 10,500 h Milling swivel head: - With torque motor and hydraulic clamping - Swivel range +30/-120°, infinitely variable - 14,000 rpm - 160 Nm torque - Drive power 29 kW - Separate spindle cooling for constant temperature - Tool holder DIN SK40 with blow-out function Integrated rotary table: - With torque motor and hydraulic clamping - Ø 610 mm - Extended clamping surface 1,100 x 610 mm General: - Heidenhain glass scales in all 5 axes - 40-position tool changer with double arm gripper - Coolant and compressed air gun - Chip conveyor Bsdpeyzd Eyefx Andodi - Coolant system - Electronic handwheel - Work area lighting

Condition: used, functionality: fully functional, machine/vehicle number: H2X387V05694, Year of construction: 2019, operating hours: 4,239 h, load capacity: 2,000 kg, lifting height: 4,760 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 2,176 mm, fork length: 1,600 mm, empty load weight: 3,909 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X387V05694 Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: good Front tire type: Superelastic Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire condition: 40 - 60% Battery voltage: 80V Battery Ah: 500Ah Battery type: PzS Bdodpfx Ansy Tcwxodji Battery year of manufacture: 2019 Battery condition: 60 - 80% Description: Workshop inspected with UVV approval; rear tires will be replaced Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, CE certificate, safety light, joystick, Full cabin including heater, interior lighting, front/rear work lights, BlueSpot front/rear.

Condition: used, Make: Diosna Bedjzuyd Ajpfx Andedi Model: SP 200 AD Machine number: 8810-108 3-phase Includes 2 x large tilting mixing bowls Flour capacity: 125 kg Dough capacity: 200 kg

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, turning diameter over cross slide: 600 mm, turning length: 548 mm, turning diameter: 460 mm, spindle bore: 88 mm, spindle speed (max.): 3,400 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 310 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 620 mm, spindle motor power: 24 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 24 m/min, rotational speed (min.): 30 rpm, rotational speed (max.): 4,500 rpm, overall weight: 7,600 kg, swing diameter over bed slide: 600 mm, bar passage: 75 mm, chuck outer diameter: 250 mm, Equipment: rotational speed infinitely variable, Top-of-the-line new machine, "THE TANK," with Siemens 828 Shopturn, BMT65 (MORI-Seiki NL series), Renishaw measuring arm, and counter-spindle. Bsdpfjylnb Ssx Andjdi Available with automation for an additional charge (see images). - Siemens touch display, 15.6 inches - Main spindle, 3,500 rpm - Siemens motor - Flat guides, Turcite coated - 12-position BMT turret for 12 driven tools - 3-jaw chuck, Ø 250 mm, main spindle - 3-jaw chuck, Ø 150 mm, counter-spindle - C-axis - Y-axis - Counter-spindle - Chip conveyor - Coolant system and internal coolant, 20 bar - Work area light - Foot pedal chuck - Machine status light, multi-colored The accessories shown in the images are not included in the offer.

Year of construction: 2019, condition: like new (used), TM Norway Automatic Gas Cylinder Filling Carousel 200/300 bar For sale: professional, fully automatic gas cylinder filling carousel manufactured by TM Norway AS, Norway. Year: 2019 Project / Serial No.: PRJ-2018-02-13-0001 CE marked This system is designed for the automated handling, preparation, filling, and control of high-pressure gas cylinders. It is suitable for industrial gas producers, cylinder filling plants, technical gas suppliers, welding gas companies, specialty gas producers, and other professional gas filling facilities. Main features: * Fully automatic 8-station carousel concept * Cylinder sizes approx. 5-50 liters according to TM Norway platform specifications * Designed for 200 and 300 bar applications * Suitable for single gases and gas mixtures * Automatic cylinder positioning and handling * Automatic valve orientation and adapter connection, depending on the configuration * Residual-pressure measurement * Automatic blow-down * Vacuum preparation * Automatic gas filling * Final pressure measurement * Automatic valve closing * Leak testing * Automatic adapter disconnection * Industrial PLC/HMI control * Rexroth control equipment * Siemens SIMATIC mobile panel * TROAX safety guarding with interlocks and emergency stops Possible gas applications, depending on the installed gas supply, adapters, software, and certification: Oxygen (O2), Nitrogen (N2), Argon (Ar), Carbon Dioxide (CO2), Helium (He), welding gases, shielding gases, industrial gases, technical gases, specialty gases, and mixed gases. The TM Norway carousel platform can support different cylinder valve connections, including DS, BS, DIN, AFNOR, CGA, and VIPR/integrated valves, depending on the installed adapters. Bdsdpfx Ans Ahhttjdoi This is not a simple manual filling manifold. It is an automated industrial cylinder filling system intended to automate several operations normally performed manually in a gas filling plant. Ideal for: Industrial gas plants, gas bottling plants, cylinder filling centers, oxygen filling plants, nitrogen filling plants, argon filling plants, CO2 filling plants, welding gas producers, mixed-gas plants, and gas plant integrators. Used industrial machine. The installation is available for inspection. The exact gas configuration, adapters, software, operating pressure, scope of supply, and recommissioning requirements must be verified for the buyer's intended application. Detailed technical PDF available upon request. Keywords: automatic gas filling carousel, gas cylinder filling machine, cylinder filling system, gas bottling plant, high-pressure gas filling, 200 bar, 300 bar, oxygen filling, nitrogen filling, argon filling, CO2 filling, helium filling, mixed gas filling, welding gas filling, industrial gas equipment, cylinder filling automation, TM Norway gas filling system. Kosan Crisplant gas filling, Kosan gas filling carousel, Siraga filling carousel, Pamasol filling machine, Pamasol gas filling, Rotarex gas filling system, Cryostar gas equipment, Linde gas filling equipment, AGA gas filling system, Messer gas filling plant, Air Liquide gas filling equipment, Air Products gas filling equipment, gas filling carousel alternative, automated cylinder filling alternative, industrial gas carousel, automatic cylinder filling carousel, high-pressure gas carousel, gas bottle filling carousel, gas bottle filling machine, compressed gas bottling machine, industrial cylinder filling equipment.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, workpiece length (max.): 2,800 mm, workpiece width (max.): 850 mm, number of slots in tool magazine: 13, actuation type: electric, total height: 1,895 mm, total length: 2,920 mm, total width: 1,890 mm, overall weight: 1,580 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, The Drillteq V-200 is in continuous use, which means the number of parts being processed is increasing. The machine is in good condition and is regularly serviced. Bedpfx Ane Afm Itodedi For more information, please call 601 548 875.

Condition: like new (used), Year of construction: 2023, operating hours: 10 h, functionality: fully functional, overall weight: 450 kg, total length: 1,600 mm, total width: 1,100 mm, total height: 1,700 mm, power: 7.5 kW (10.20 HP), type of input current: three-phase, We are selling a pulverizer that was previously used for fine grinding trials in the food sector. Bdodpsudvt Rsfx Andoi The machine is robust, reliable and powerful. Technical data + Power: 7.5 kw + Processing capacity: 20-50 kg per hour + Weight: 450 kg Using liquid nitrogen, the machine is immediately ready for use simply plug it in and get started. It is still in mint condition and can be viewed by appointment. be inspected by appointment. The machine is sold plus 19% sales tax. If you are interested or have any questions, we look forward to hearing from you.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 720 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 48 m/min, rapid traverse Z-axis: 48 m/min, controller manufacturer: Heidenhain, controller model: TNC 7, workpiece weight (max.): 300 kg, rotational speed (max.): 100 rpm, overall weight: 11,000 kg, spindle speed (max.): 15,000 rpm, coolant supply: 40 bar, spindle nose: SK40, number of slots in tool magazine: 60, mount diameter: 80 mm, tool length: 300 mm, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Top 5-axis machine with torque drives in B and C axes, optionally with BLUM laser, tool measurement, internal coolant up to 60 bar, belt filter, further options on request, automation is also possible. Bedoyucq Hjpfx Andodi

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table width: 1,600 mm, table length: 2,100 mm, table load: 6,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Exhibition machine, immediately available, inspection possible near Hanover Bdodpfeylirlex Andoi

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 147342, turning length: 514 mm, turning diameter: 350 mm, spindle speed (max.): 5,000 rpm, bar diameter (max.): 51 mm, TECHNICAL DETAILS Swinging diameter: max. 525 mm Turning diameter: max. 350 mm Turning length: max. 514 mm Bar diameter: max. 51 mm Spindle speed: 35–5,000 rpm Main drive power: 18.5 kW Constant torque: 333 Nm Spindle nose: A2-6 Spindle bore: 61 mm Tool stations: 12 X-axis travel: 190 mm Z-axis travel: 535 mm Bdjdpo Afw Rrefx Andoi MACHINE DETAILS Weight: 5,650 kg EQUIPMENT 12-position tool turret

Condition: used, Equipped with two independent extruders, build volume: 260x350x340mm, standard nozzle: 0.4mm, interchangeable, additional sizes optional, layer thickness: 0.05-0.6mm, software compatibility: Simplify3D, Cura, Slic3r, file formats: STL, OBJ, G-code, print bed: heated glass/metal platform, temperatures: extruder up to 260°C/heated bed up to 120°C, power supply: 230V, 50/60Hz, length: 840mm, width: 750mm, height: 1,020mm, weight: approx. 400kg, total operating time: 131 days, 17h, 25min, 7s, longest print job: 2 days, 14h, 6min, 35s, filament consumption: 19,912.05m. On-site inspection is possible. Bsdez R Uxmspfx Andodi

Condition: excellent (used), For sale, a used KSB ETABLOC-G 32-200/752 centrifugal pump equipped with a 7.5 kW electric motor. The pump has been inspected – it is fully functional and ready for operation. Pump data: Manufacturer: KSB Aktiengesellschaft Model: ETABLOC-G 32-200/752 Ident-No.: 48862637 Design: G11 No.: 5-927-123823/1 Flow rate Q: 35 m³/h Head H: 61.5–43 m Pump speed: 2900 rpm Additional designation: Pumpen Distel Type: G32-200/752 No.: 198057/2 Motor data: Manufacturer: KSB Type: QUPS 132S2C-60 Power: 7.5 kW Power supply: 3-phase Frequency: 50 Hz Bsdez Snu Nepfx Andedi Voltage: 380–420 / 660–725 V Current: 14.7–14 / 8.5–8.1 A Speed: 2880 rpm cos φ: 0.90 Protection class: IP55 Insulation class: F Used pump, in good technical condition. Normal signs of use and storage are visible. The visual condition is accurately shown in the photos. The pump has been inspected, is fully functional, and ready for further use. The item for sale is exactly the one shown in the photos.

Condition: good (used), Year of construction: 2006, TECHNICAL DATA Main drive Speed: Infinitely programmable: 18`000 rpm Bodpfx Anju Hkb Rododi In set-up mode: 20 - 800 rpm Work spindle: Hollow shank taper: HSK-A63 Tool clamping: Hydraulic Feed drive Linear motor: X-axis AC servomotors: C, B, Y, Z Feed speed X, Y, Z: Up to 20`000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Position measuring system Resolution: C, B, X, Y, Z: 0.001 mm Position tolerance: C, B, X, Y, Z: 0.010 mm Working range X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: 0° to 161.955 ° C-axis: n x 360 ° Tool changer with double gripper Magazine slots: 120 Max. Tool diameter without free spaces: 80 Max. Tool diameter with free spaces: 130 Max. Tool length from spindle nose: 300 mm Max. Tool weight: 6 kg NC rotary table with swivel axis C-axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance of T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. Torque: 1491 Nm Max. Rotation of the table top: 50 rpm B-axis: Max. Swivel torque: 1864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955 ° Input and display precision: 0.001 ° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6800 kg Installation weight: Approx. 7500 kg Dimensions: 4170 x 3133 x 2560 mm SCOPE OF OFFER U.A: (list not exhaustive): Deckel Maho DMU 50 Evo CNC machining center Heidenhain iTNC 530 Tool breakage control Blum measuring probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of supply according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: excellent (used), For sale: KSB ETABLOC G 40-200/1102 G4 centrifugal pump with an 11 kW electric motor. The pump is used, has been inspected, and is in fully functional condition. It was inspected before being put up for sale. Its visual condition matches the photos – normal signs of use and storage are visible. Pump data: Manufacturer: KSB – Klein, Schanzlin & Becker AG Type: ETABLOC G 40-200/1102 G4 Flow rate Q: 20–60 m³/h Head H: 57–35 m Rotational speed: 2900 rpm Bdodpfx Ansz Sn Nyedji No.: 5-118-547 043/1 Motor data: Manufacturer: KSB / Klein, Schanzlin & Becker AG Motor type: ZKA 160 MK2 Power: 11 kW Voltage: 380 V Current: 22 A Frequency: 50 Hz Rotational speed: 2880 rpm cos φ: 0.9 No.: Ident-No.: 00533537 Motor-No.: 544077 Condition: used – inspected – 100% functional. For sale is the exact unit shown in the photos.

Condition: used, Year of construction: 2022, machine/vehicle number: 0-341-73-4473, table height: 920 mm, HOMAG SAWTEQ B-200 / HPP 200/43/43 – Year of manufacture 2022 Horizontal panel dividing saw for wood-based panels with air cushion tables, program carriage, and operator station. Machine number: 0-341-73-4473 Cutting length: 4,300 mm Saw blade projection: 80 mm Bdedpfx As Agxfnendoi Main saw motor: 18.0 kW Scoring saw motor: 1.5 kW Saw carriage speed: up to 80 m/min Program carriage: 25 m/min forward, 80 m/min backward Clamping jaws: 6 pieces, as per order confirmation Working height: 920 mm Meter readings according to screenshot from October 22, 2026: Main usage: 2,092.87 h Operating time: 7,033.96 h The meter reading screenshot is part of the image gallery. Location: Basel area, Switzerland. Inspection possible until early December 2026 by prior appointment. Dismantling and removal in the period from December 8–18, 2026, after scheduling. Price on request. Scope of supply, software/license scope, and current operating condition to be agreed upon. Subject to change and errors.

Condition: used, Year of construction: 2007, Attachment: Chamber filter press, used Type: Passavant Year of manufacture: 2007 Application: Sludge dewatering Filter plate format: 1500x2000 Number of plates: approx. 58 Filter plates: PP Filter cloths: available as an option, tailored to the medium Filter area: approx. 286 m2 Press volume: approx. 4660 dm3 Filter pressure: approx. 15 bar Total weight: 32,900 kg Application: Sludge treatment, dewatering system. Filter presses are pressure filters that operate in a batch process for the solid-liquid separation of suspensions. Purchase or rental: Rental or purchase. Inspection of the equipment can be arranged at our facility. Bjdpfxszk E H Is Andedi

Condition: good (used), Foldmaster 200 SA Automatic Folding Machine This is the latest product from the Swiss company Multigraf AG. The machine is in good working order and ready for production. Equipped with new rollers. Features 2 folding plates that are electronically adjusted via a control panel, allowing for very fast setup and high precision. Includes a pneumatic feed system and soundproofing. Comes with accessories, including: an operating manual and a creasing kit. Ideal for the pharmaceutical industry due to its small minimum fold size. Electric delivery system with infinitely variable delivery speed. Infinitely variable folding speed. Power supply: 230V. Becker compressor. Format: 35 x 55 cm. The control unit/counter performs the following functions: • setting a specific batch size; • setting the duration of the pause between individual batches of sheets; • displaying the total quantity of processed material; Bjdpfsz S Uw Rsx Andodi • displaying the operating speed (units per hour); • programming the suction duration; • programming the pulse duration for the spacing between sheets. Paper weight range: 40–240 g/m². Throughput (A4 format): up to 30,000 sheets per hour.

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 26, Automatic bagging machine LAMAR SL-200 – 2015 For sale: an automatic bagging machine / packaging machine, model SL-200, manufactured by the Polish company LAMAR in 2015. The machine is designed for packaging bulk products, including pellets, fertilizers, animal feed, soil, and salt. Key parameters: Packaging capacity for pellets: approx. 5 tons/hour. Adjustable product weight per bag: 5–25 kg. Bag length adjustment: lengthening and shortening from the operator panel. Film tube: 940 mm. Technical specifications and equipment: 3-lane weighing dispenser, bag forming unit for 15 kg bags and other formats within the specified adjustment range, gusset forming unit, film sealing unit, servo motor for positioning the horizontal jaws, unit for measuring bag length on film without printing, roller perforating unit, technological platform, control cabinet, feed hopper. Bdodpfx Ane Aa Duyodji The machine is in very good technical condition. A video of the machine in operation can be provided. Please contact us for further information.

Condition: new, Year of construction: 2012, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2266, table width: 200 mm, 4th and 5th Axis Rotary Table LCM ITALY BRC-200 (NEW / NEVER USED IN PRODUCTION) General Description: Due to changes in production requirements and reorganization of work processes, we are selling a 2-axis rotary and tilting table (4th and 5th axes) manufactured by LCM ITALY, model BRC-200. The table was purchased as an accessory for an ISPER HSP643 machining center and was only installed and tested during the machine acceptance phase. Immediately after functional verification, it was disassembled and stored in the warehouse. The equipment is completely new, has never been used in production, and is perfectly preserved. Technical Specifications and Condition Manufacturer: LCM ITALY Model: BRC-200 Type: Integrated 4th and 5th axis rotary table for CNC machining centers Original machine: ISPER HSP643 machining center Bdedpfoz Hvg Usx Andji Testing CNC: Heidenhain TNC 530 Condition: New / Unused (only acceptance testing) Documentation: Wiring diagrams and complete original technical documentation from the manufacturer are provided. Support and Interfacing The manufacturer, LCM ITALY, is available to provide direct technical support for interfacing, configuration, and any installation/restoration of the table, even on a different CNC or machine. Sales Conditions Availability: Immediate Inspection: Can be viewed in person at our facility by appointment.

Condition: excellent (used), For sale is an industrial KSB ETABLOC-GN 50-200/1502.21 centrifugal pump, equipped with a 15 kW KSB electric motor. The pump is designed for industrial applications, technological installations, water circulation systems, and other suitable media. Pump technical data: Manufacturer: KSB Aktiengesellschaft Type: ETABLOC-GN 50-200/1502.21 Identification number: 48861841 Flow rate Q: 12–100 m³/h Head H: 55–34.5 m Rotational speed: 2900 rpm Connections: flanged Bedpsz Sn Suofx Andodi Motor data: Manufacturer: KSB Type: QUPA 160 M2B-6 Power: 15 kW / 50 Hz Voltage: 380–660–420 V Current: 27.8–16.1–25.2 A cos φ: 0.93 Protection class: IP55 Insulation class: F Motor weight: approx. 87 kg Condition: used, with normal signs of use and storage visible in the photos. A complete set consisting of the pump and electric motor is being sold, exactly as shown in the photos.