Used Ergometrics 900 for sale (4,575)

Condition: excellent (used), Year of construction: 2019, For sale are the following functional and well-maintained oil burners: 1. Burner type: WM-L10/3-A, MULTIFLAM Output: 200 - 900 kW 17-75 kg/h Design: T-3LN Year of manufacture: 2019 2. For sale is a functional and well-maintained oil burner from Weishaupt, model WM-GL10. It was only used with oil, therefore it does not have a gas line. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 3. For sale is a functional and well-maintained oil burner from Weishaupt, model RL3-A. Burner type: RL3-A Predpjy Uvhtjfx Airjc Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Year of manufacture: 2002

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, with Dungs gas piping DN 50 Burner type: WM-G10/3-A Design: ZM-LN Year of manufacture: 2011 Output: 125-900 kW Pedpfxozdku Re Airsrc

Condition: excellent (used), Catalog number: 7649 TECHNICAL DATA inlet width: 900mm inlet height: 300mm shaft width: 1030mm shaft diameter: 700mm blade length: 1030mm number of blades: 3 pcs screen dimensions: 70x70mm from below, 2 toothed pulling shafts lower shaft motor: 7.5kW from above, 2 toothed pulling shafts upper shaft motor: 7.5kW belt conveyor apron feeder with chain belt 5600mm + 10600mm, 2.2kW feeder belt width: 800mm main motor: 90kW reverse gear overall machine dimensions (L/W/H): 3300x3100x1700mm shredder base dimensions: 3300x2080x1940mm feeder/apron feeder base dimensions (L/W/H): 5600x900x1000mm + 10600x1050x1600mm feeder belt base dimensions: 5100x1300x2520mm Prodpe Af Uxmefx Airsc total weight approximately: 16000kg ADVANTAGES – German production – chain-type apron feeder, equipped with scrapers – reverse gear – DTR documentation – used shredder, very good condition Net price: 209900 PLN Net price: 48800 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary with higher fluctuations)

Condition: good (used), For sale: CRATHERN, PERONDI IA630, with a capacity of 900. Psdpfxsz Sat Ee Airsrc

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3/UE/21/Z, tank capacity: 900 l, total length: 2,000 mm, total width: 1,190 mm, total height: 1,050 mm, inner diameter: 1,000 mm, overall weight: 740 kg, wall material: stainless steel, number of chambers: 1, operating temperature: 100 °C, input voltage: 380 V, input current: 42 A, Has been used for cooking up sirup and marmelade. Well function and in good shape. Pjdpfx Aez Sy N Esirorc

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 3/UE/21/Z, tank capacity: 900 l, total length: 2,000 mm, total width: 1,190 mm, total height: 1,050 mm, inner diameter: 1,000 mm, overall weight: 740 kg, wall material: stainless steel, number of chambers: 1, operating temperature: 100 °C, input voltage: 380 V, input current: 42 A, Has been used for cooking up sirup and marmelade. Well function and in good shape. Prjdpfx Aiez Sy Izjrec

Condition: excellent (used), CATALOGUE NUMBER 6582 TECHNICAL DATA - max. width of the workpiece: 920 mm - max. height of the workpiece: 150 mm 2 units: 1) grooved rubber roller for calibrating, 11 kW 2) grooved rubber roller for calibrating + tape blowing, 7.5 kW Top: - 2 slip rubber rollers - unit - 2 slip rubber rollers - unit - 2 slip rubber rollers Bottom: - 3 slip rubber rollers - conveyor belt - pneumatic belt oscillation - electric table lifting - stepless feed speed adjustment - working pressure 8-10 bar Podozw Dchspfx Airorc - pneumatic brake - diameter of the dust extraction nozzle: 2 x 160 mm - overall dimensions (L/W/H): 1600 x 1460 x 2000 mm - weight: approx. 1305 kg - Made in Germany - 2 units - Used grinder, very good condition Net price: 24,900 PLN Net price: 5,791 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: excellent (used), Year of construction: 2020, Pallmann PS-H 600/900 plastic shredding line. Mill chamber dimensions 600x900mm, power 75/90kW. Very good condition. Line components: 1. Conveyor, Keiper product Drive power 1.1 kW Belt working width 600 mm Center distance 5500 mm 2. Surface metal detector, type FS 650, manufacturer Sesotec Detection width 640 mm Podpfxjzxup Is Airorc Detection sensitivity for FE ball at detection height of 20 mm: 2.5 mm Detection sensitivity for FE nut at detection height of 100 mm: M6 3. Cutting mill, PS-H 600x900 F3/SD5, PALLMANN product 4. Volumetric feeder, type RVR 10, WAM product Drive power 0.75 kW 5. Screw conveyor, type TME219/0440, WAM product Drive power 2.2 kW 6. Sifter, type R25, Waltinger manufacturer Drive power 1.5 kW 7. Fan, type MXE063-008030-00, Reitz product Flow rate: 80 m3/min Total pressure increase 630 daPa Drive power 15 kW Rotational speed 3,000 rpm 8. Filter, type PA 7x8-2500, Tama product Residual dust content: < 20 mg/m3 Filter area 54 m2 Exhaust air 4800 m3/h 9. Filter, type PA 6x5-2000 CCD, Tama product Residual dust content: < 20 mg/m3 Filter area 23 m2 Exhaust air 2100 m3/h 10. Fan, type MXE031-003530-00, Reitz product Flow rate: 35 m3/min Total pressure increase 315 daPa Drive power 3 kW Rotational speed 3,000 rpm 11. Metal separator, type Rapid Vario FS 100, Sesotec product Removal duration (adjustable) 0.5-29 s Compressed air connection (hose) 6/8 mm Working pressure 5-8 bar 12. Screw conveyor, type TMS219/0540, WAM product Drive power 2.2 kW

Condition: ready for operation (used), Year of construction: 2019, machine/vehicle number: 1572, functionality: fully functional, operating hours: 5,500 h, power: 55 kW (74.78 HP), cutting height (max.): 1,000 mm, cutting width (max.): 1,200 mm, control type: PLC-controlled, overall weight: 20,000 kg, High-quality and complete Mebor wood processing line in excellent condition. Can be seen in operation in Gemert, the Netherlands. Included are: - Horizontal band saw HTZ 1200 Plus /year of manufacture 2019/, equipped with heavy-duty hydraulics for automatic log processing, maximum cutting length 9m, Optifast 10 control system - Multi-blade saw VR 900 /year of manufacture 2020/ with 3 movable heads - Log loader MLD Logdeck - 2x RCM 800 with left/right sorting - 2x CCP conveyor chains Excellent synchronization with the main band saw for maximum efficiency. The complete line has been professionally maintained and is ready for immediate use. Serious buyers are welcome to visit and see a demonstration on-site /in operation/. Please include your company details /including VAT number/ if you are interested. Prsdpfsz Eadbjx Airsc

Condition: used, Year of construction: 2012, overall weight: 4,000 kg, input voltage: 400 V, Equipment: documentation/manual, We offer this used MEBA Bio QZ 900 shredding system, manufactured in 2012, for sale. Manufacturer: MEBA Model: Bio QZ 900 Year of manufacture: 2015 Condition: used Category ID: 568 Type ID: 304 Machine type: shredding system, cross-flow shredder The machine was used as a shredder in a biogas plant. However, it can also be used for other shredding applications. If you have any questions or require further information, please send us a message or call us. Podpjz Tfmfofx Airjrc

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 ST. Gebr. Zwei Komponenten Spritzgiessmaschine das zweite Aggegeat ist seitlich angebau Hersteller: NETSTAL Typ: SYNERGY 1750-900-230 Baujahr: 2016 Schließkraft: 175 Tonnen Holmabstand: 510 x 510 mm Schneckendurchmesser 1: 50 mm Spritzteilgewicht 1: 377 g/PS Pedpfx Aijz Nmi Hersrc Schneckendurchmesser 2: 25 mm Spritzteilgewicht 2: 47 g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Zweites Aggregat ist seitlich angebaut Roboter Wittmann, Baujahr: 2016

Condition: excellent (used), Year of construction: 2015, clamping force: 9,000 kN, Equipment: documentation/manual, *ENGEL DUO 1800H/1800M/900 WP 2FCLS – Combi-M (2K)* Year of manufacture: 2015 Predpez Az Iaefx Airjc Control system: CC300 Clamping force: 9,000 kN (900 t) QMC system: Bolt Hole _— Clamp Unit —_ Min. mould height: 1,300 mm Max. mould height: 2,100 mm Platen size (H × V): 1,850 × 1,810 mm Tie-bar spacing (H × V): 1,420 × 1,170 mm Opening stroke: 1,800 mm Location ring – fixed platen: Ø 250 mm Location ring – moving platen: Ø 250 mm Max. total tool weight: 21,000 kg _— Injection Unit 1 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 180 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Injection Unit 2 —_ L/D ratio: 20 Screw diameter: Ø 60 mm Barrel volume: 763 cm³ Injection rate: 317 cm³/s Max. hydraulic pressure: 184 bar Max. specific pressure: 1,960 bar Screw stroke: 270 mm Max. screw rotation: 253 RPM _— Mould / Peripherals —_ Fixed platen cores: 1 Moving platen cores: 1 + 4 on rotary table Sequential valve-gate control (cascade): 16 circuits 8 Hot runner control: 48 zones Robot VIPER 40 Laser Conveyor Belt

Condition: like new (used), Year of construction: 2025, operating hours: 200 h, functionality: fully functional, workpiece weight (max.): 4,000 kg, table length: 14,000 mm, Equipment: documentation/manual, FOR SALE: Voortman MO Compact 900 — 6-Axis CNC Pipe Plasma Cutting Machine (2025) Manufacturer: Voortman Steel Machinery / Müller Opladen GmbH Model: MO Compact 900 Year of commissioning: 2025 Condition: Demo machine — under 200 production hours, virtually factory new Prodpfx Aey H I Trsirec Type: CNC plasma PIPE profiling machine (6-axis) - no beams Category: Plasma cutter / Pipe cutting machine Machine description: This Voortman MO Compact 900 is a 6-axis CNC pipe cutting machine capable of processing round pipes up to 914 mm in diameter and 12,000 mm in length, with wall thicknesses ranging from 3 to 50 mm. The machine was installed in 2025 in Belgium and has logged fewer than 200 production hours — making it virtually a new machine at a pre-owned price. The 6th CNC axis maintains a constant torch-to-material distance, ensuring flawless weld preparations and bevel cuts up to ±45°. The proprietary 3D Azimuth cutting head allows torch adjustment of ±60° and 380° rotation for precise contour cutting on any pipe geometry. Included equipment: — Voortman MO Compact 900 pipe profiling machine (6 CNC axes with x-rail, truck, column, and cutting unit) — Hypertherm MAXPRO200 plasma source (200 A, 100% duty cycle, manual gas console) — 3D Azimuth cutting head with intelligent torch positioning for x-, y-, and v-weld preparations — Electromechanical tracer arm for continuous pipe circularity measurement — Self-centering three-jaw chuck (1,200 Nm torque) — Pipe conveyor transport system on rail — Two-point fume extraction (at cutting head and through chuck) — Voortman Filter Unit ECO6/HCS with Donaldson Ultra-Web® cartridge technology and spark arrestor — E-cabinet with CNC unit, PLC, IP54 enclosure, power buffer — Industrial PC with 22" touchscreen and mobile control panel — All safety devices (CE certified per 2006/42/CE and 2004/108/CE) — Full technical documentation, operator manuals, installation drawings Key specifications: — Clamping range: 50 – 914 mm — Max pipe length: 12,000 mm — Max pipe weight: 4,000 kg (with pipe carriages) — Plasma bevel range: +45° / −45° — Cutting capacity: 3 – 50 mm (mild steel) — Pierce capacity: 32 mm — Chuck rotation speed: 0 – 10 rpm — Torch carriage speed: 0 – 15,000 mm/min — Installation footprint: 7.0 × 4.0 × 4.0 m — Machine weight: 6,000 kg Please note: COROBS machine control software licenses are not included and must be purchased separately from Voortman. Voortman can provide reinstallation, commissioning, operator training, and ongoing maintenance contracts at the buyer's facility. Why buy this machine? A new MO Compact 900 currently costs EUR 350,000+ and has a lead time of 6–12 months. This unit offers the same capability with immediate availability and significant savings. Full OEM support from Voortman is available for the buyer. Location: Belgium (available for inspection by appointment) Delivery: Ex-works. Dismantling and transport by agreement. For questions or further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Typ: SYNERGY2400-900 Baujahr: 2004 Psdpfx Asz Iz Hcoirjrc Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser: 50 mm Spritzteilgewicht: 377g/PS Ausstattung: Kernzüge 2 x DS / 1 x AS Roboter WITTMANN

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1,0 ST. gebr. Spritzgiessmaschine mit Roboter Hersteller: NETSTAL Typ: SYNERGY2400-900 Baujahr: 2004 Schließkraft: 240 Tonnen Holmabstand: 630 x 630 mm Schneckendurchmesser: 50 mm Spritzteilgewicht: 377g/PS Ausstattung: Psdsz I Agdspfx Airsrc Kernzüge 2 x DS / 1 x AS Roboter WITTMANN

Condition: used, Year of construction: 2011, Horizontal machining center Burkhardt + Weber Type/Model: MCX 900 Condition: Used Year of manufacture: 2011 Operating hours: 27,289 h Control system: Siemens 840D Technical data Working area and workpiece capacity Travel ranges X / Y / Z: 1,650 mm / 1,600 mm / 1,500 mm Interference circle: 1,850 mm across the entire X travel range Pallet size: 1,000 x 800 mm Max. pallet load: 3,000 kg Tilting moment for pallet machining up to 40,000 Nm Pallet design: T-slots Main spindle Tool holder: SK 50 Gear unit: 2-stage Spindle speed up to 8,000 rpm Spindle power: 37 kW (S1) Spindle torque: 1,220 Nm (S1) Tool management Magazine with over 200 tool positions Max. tool weight: 40 kg Tool tilting moment up to 120 Nm Podpfxo Afpnio Airsrc Tool taper cleaning Tool loading via the spindle Tool planning system on the spindle Mechanical drill break detection up to 750 mm Coolant system Coolant tank volume: 2,500 liters Paper band filter High-pressure coolant system: 70 bar Adjustable coolant pressure Cooling unit Flushing of pallet support Workpiece flushing Coolant spray gun Automation and hydraulics Linked to a robot cell Year of manufacture of the robot cell: 2013 Fixture hydraulics Hydraulic connection on the pallet changer Hydraulic connection in the working area Hydraulic connection to the pallets Hydraulic extension for clamping pressures over 60 bar Equipment: Process monitor iCut Collision monitoring system Brankamp CMS UPS 4-way light stack Quoted item: Shipping costs will be provided in a separate offer.

Condition: used, Year of construction: 2001, functionality: fully functional, MAPPI AU 1F 1S 900 1800 O.4 R.S.A. - Year 2001 Tempering furnace Working dimensions: 900x2000 mm Glass thickness: 4-19 mm Overall dimensions: Length: 10.50 m Width: 2.40 m Height: 2.40 m Pjdpfx Ao Agtpvjirjrc + Fan (2.40x2.30x2.40 m) Power: 107 kW

Condition: used, Year of construction: 2016, machine/vehicle number: LC528, Technical Specifications & Performance DataComplete 2016 glass beer line built around a GAI monoblock and Enos labeler, in ready for operation condition. Throughput up to 900 bottles/hour across 0.33 L, 0.50 L, 0.70 L formats with isobaric counter-pressure filling for carbonated beer. This unit is delivered as second-hand used beer bottling equipment with documented components and safety features.Manufacturer: GAI (filling monoblock), Enos (labeling)Production speed: up to 900 bottles/hourFilling technology: Isobaric counter-pressure, with double pre-evacuation system.Container types: Glass bottlesBottle formats: 0.33 L, 0.50 L, 0.70 LProduct types: Beer (configured for carbonated products)Line components: GAI rinsing–filling–capping monoblock with crown capper; Enos labeling systemCondition: READY FOR OPERATIONDocumentation: Manuals availableSafety: Guarding and interlocks consistent with modern linesManufacturerModelYearMachine typeNotesGAIMLE441-BIER-0032016Filling MonoblockConfigured for crown capEnosSIRIAM2016Labeling MachineAdvanced Automation & Control SystemsThe line employs centralized controls to streamline operation and changeovers. The GAI monoblock regulates isobaric parameters to limit oxygen pickup and foam, maintaining consistent fill levels on all listed formats. An operator-friendly HMI bottling station provides status, alarms, and access to format recipes where configured.Control interface: HMI with status indications and alarmsAutomation: PLC-based logic; recipe-led parameters when enabledProcess control: Counter-pressure setpoints tailored to beer carbonationSafety features: Interlocked guards, emergency stops, standard protectionsElectrical: Standard industrial power supply (to be confirmed during site survey)Production Line Integration CapabilitiesDesigned to interface with common upstream and downstream modules, this beer bottling machinery connects to depalletizers, conveyors, date coders, inspection, and case packing. The Enos SIRI... Prodpo Adywlsfx Airjc

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l Podjzvwirspfx Airsrc • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: used, Year of construction: 2017, machine/vehicle number: IntNr231674, A high-quality, 3-axis precision machining center, the MIKRON MILL P 900 from GF Machining Solutions, built in 2017, is for sale. TECHNICAL DATA General Data Manufacturer: MIKRON / GF Machining Solutions Model: MILL P 900 Machine type: Vertical 3-axis precision machining center Pjdpfsz Ipnnox Airorc Year of manufacture: 2017 Number of axes: 3 Spindle operating hours: approx. 1,530 hours CNC control: FANUC 31i-B TECHNICAL DATA Travel X: 900 mm Travel Y: 600 mm Travel Z: 450 mm Rapid traverse X/Y/Z: 30 m/min Clamping area: approx. 1,000 × 600 mm Max. table load: 1,000 kg Max. spindle speed: 20,000 rpm Tool holder: HSK-A63 Spindle power: up to approx. 36 kW Torque: up to approx. 120 Nm Tool changer: 30-position Tool holder: HSK-A63 Machine concept: 3-axis gantry machining center The machine can be inspected on site by appointment. Subject to change, errors and prior sale!

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Prjdpozvm E Ajfx Airsc Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Year of manufacture: 2013 Milling head Working area X: 3000 Working area Y: 900 Working area Z: 50 Separate units: 1 Vertical drill: 12 Horizontal drill X: 4 Horizontal drill Y: 2 Grooving saw: Yes Stationary machine: Yes Prsdpfxszxyfzj Airoc Clamping system: Clamps Safety feature: Photoelectric cell Controls and software SCM XILOG Minimum dimensions: 3920x1170x2150

Condition: used, Year of construction: 1996, functionality: fully functional, travel distance X-axis: 900 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 500 mm, Mikron UMS 900 with internal coolant system and 4th axis Considering its age, the machine is in good condition and fully functional. A special feature is the machine’s internal coolant system and full-fledged 4th axis. In addition, it has an HF spindle from Fischer with a cooling unit that can be swiveled into position. Equipment: - X-axis 900mm / Y-axis 630mm / Z-axis 500mm - Table dimensions: 1200x600mm - Internal coolant system through the spindle - Spindle speed max. 6300 rpm with SK40 - 4th axis as a rotary table, Hoffmann RWC 160 with jaw chuck - Tool changer for SK and HSK tool holders - HF spindle Fischer 42,000 rpm with HSK40 - Electric handwheel - Full protective enclosure - Complete documentation available - Control cabinet very clean Psdpfx Aez Iz I Hoirjrc - Many tool holders included The screen is not defective; the black shadows are due to the photography. Several components have already been renewed, e.g., the spindle bearings; the Y-axis has been overhauled. The absolute special feature is the internal coolant supply through the spindle! If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Prodpfx Aiszvm T Tjrsc Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: good (used), Year of construction: 2016, operating hours: 715 h, functionality: fully functional, machine/vehicle number: 2530-01, working width: 900 mm, Due to machine rejuvenation, we would like to sell our barely used Timesavers wet deburring machine. Pedpfsv Tnfiex Airsrc The machine is available for inspection and testing; it is live. Please contact us with any questions.