Used Minarctig Evo for sale (612)

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: Dkedpsw I Uxcjfx Afpjh - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 352 NC EVO, Semi-automatic circular saw for sawing aluminum and light metal alloys, using carbide-tipped circular saw blades. Includes dust extraction and material handling (roller conveyors). Djdpsv T U Tgjfx Afpekh Machine for miter cuts from 45° right to 45° left. The vertical alignment allows for sawing operations with the head tilted between 0° and 45° left.

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 17,332 h, load capacity: 7,000 kg, lifting height: 4,150 mm, fuel type: gas, mast type: duplex, power: 72 kW (97.89 HP), No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Lift capacity: max. 7,000 kg Lifting data Lift height: 4,150 mm Mast type: Duplex Fork length: 2,400 mm Drive & engine Dodpfx Afewhk D Aopskh Fuel type: Gas Power: 72 kW (97.89 hp) MACHINE DETAILS Overall length: 6,100 mm Overall width: 1,940 mm Overall height: 3,230 mm Unladen weight: 12,060 kg EQUIPMENT - Hydraulically adjustable forks - Sideshift - Air conditioning - Heater - Full cab - Windshield wiper - LED front work lights - LED rear work lights - Rotating beacon - Single-pedal control - Dual gas tank

Condition: new, Year of construction: 2025, Arjes IMPAKTOR 250 e-EVO II (Electric) Stationary, fully electric, Twin Shaft Shredder Year: 2025 Djdjt Urq Uepfx Afpokh Hours: NEW 1x Set of shafts (choice available, various types depending on application*) 1x Set of breaking bars or breaker basket for concrete, wood, or cable 1x quick-change cassette, for fast shaft change 1x remote control Discharge belt and overband magnet available on request Includes frequency converter. Guarantees an extremely energy-efficient shredding process. Electric Motor – 160kW Gearbox: Bonfiglioli Shredding unit: Length (mm) 3,300 Width (mm) 2,300 Height (mm) 3,200 Control unit Length (mm) 2,600 Width (mm) 1,600 Height (mm) 2,700 Weight (kg) approx. 15,000 kg Shredding Unit Hopper volume (m³) 2.25 Shaft length (mm) 1,500 Rotation speed (rpm) 11–35 Throughput performance: average values without guarantee! The actual values depend on the equipment of the shredder, the shaft configuration, the position of the counter rakes and the optimal material feed. Construction waste ⌀ 80–100 t/h Concrete / Asphalt ⌀ 60–80 t/h Waste wood ⌀ 10 t/h Biomass ⌀ 20 t/h Waste & Plastics ⌀ 10–15 t/h * You can choose between these shafts: - Star shafts 9x4 or 9x6 (Household waste, waste wood, plastic, tires, e-scrap) - Concrete shafts (Concrete, stone, construction waste, asphalt, e-scrap) - Paddle shafts (Wood, waste wood, green waste) - Metal shafts (Home appliances, e-scrap, aluminum (up to 3mm))

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 7,394 h, load capacity: 2,000 kg, lifting height: 3,600 mm, free lift: 150 mm, fuel type: electric, mast type: simplex, construction height: 2,375 mm, fork carriage width: 980 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Double pedal Condition: Refurbished without warranty Technical condition: Good Dsdexr R Eropfx Afpokh Front tire type: Superelastic Front tire size: 200 50 10 NM Front tire condition: 60 - 80% Rear tire type: Superelastic Rear tire size: 16x6-8 NM Rear tire condition: 60 - 80% Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: GNB Battery type: PzS Battery year: 2017 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection logbook. For further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to provide offers for leasing, financing, or delivery at attractive conditions. Trade-in of Linde units is also possible—even without purchasing a unit from us. The operating hours shown are as of the listing date. Subject to prior sale, changes, and errors. Sideshift, Kaup sideshift NEW 1040mm, third valve, rear working light, front working light, heating, full cab, safety light.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 3,583 h, load capacity: 1,800 kg, lifting height: 4,625 mm, free lift: 1,524 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Single-pedal control (conversion to two-pedal possible) Condition: Refurbished, no warranty Technical condition: Good Front tire type: Superelastic Dedpfx Aoxr R Elefpokh Front tire size: 200/50-10 Front tire condition: New Rear tire type: Superelastic Rear tire size: 140/55-9 Rear tire condition: New Battery voltage: 48V Battery capacity: 625 Ah Battery manufacturer: GNB Battery type: PzS Battery year: 2019 Battery condition: 60 - 80% Description: Handover with new FEM 4004 inspection including inspection logbook. If you have any further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage at Fleischmann Fördertechnik. We are happy to offer lease & financing as well as delivery at attractive conditions. We also accept trade-ins of Linde equipment – even if you do not purchase a unit from us. Listed operating hours correspond to the status at the time of listing. Subject to prior sale, changes, and errors. Sideshift, Integrated sideshift, 4th valve up to fork carriage 3rd valve, 4th valve, rear work lights, front work lights, roof cover, front windscreen, full free lift, safety light, single pedal,

Condition: ready for operation (used), Year of construction: 2019, operating hours: 250 h, functionality: fully functional, workpiece weight (max.): 100 kg, working width: 500 mm, transport length: 12,000 mm, feed rate X-axis: 90 m/min, feed length X-axis: 12,000 mm, working height: 300 mm, pass-through height: 300 mm, type of input current: three-phase, total length: 2,910 mm, total width: 1,300 mm, load capacity: 100 kg, overall weight: 1,000 kg, nominal power: 2.3 kW (3.13 HP), Schiele Impregmat EVO – Professional Impregnation and Coating Machine This robust industrial Schiele Impregmat EVO is a fully automatic coating and impregnation machine, designed for high-quality and loss-free impregnation, glazing, and coloring of planed and sawn wood materials.​ Technical Features: The machine is equipped with a patented double X-overlapping spray system, ensuring even application on all sides without material loss. With 8 or optionally 10 integrated brush stations, the EVO can safely and reliably process large cross-sections and solid workpieces. This makes it ideal for laminated beams, solid wooden beams, and board material.​ Working Range: Up to 500 x 300 mm maximum workpiece dimensions (optionally up to 500 x 500 mm available). Minimum workpiece length approximately 600 mm. The feed speed is variable, about 10-60 m/min., with a working height of approximately 900 mm.​ Materials and Durability: The entire frame is made of stainless steel (SS), aluminum, and plastic for contact surfaces, providing extreme wear and corrosion resistance. All drive elements are externally mounted and protected against corrosion. The brush movements are lateral and mounted on the top, preventing medium from entering the drive mechanism.​ Applications: Suitable for water-soluble impregnation and paint media, salts, oils, tints, and thin-layer varnish with a maximum viscosity of 25 seconds DIN 4 jar. Also suitable for solvent-containing materials.​ Efficiency: Special overflow nozzles ensure ideal saturation of all hard and soft wood areas. Filtered material is returned to the circuit, resulting in material savings and cost efficiency.​ Advantages: This machine is known for its precision, consistent production quality, and reliability. Automated impregnation results in uniform finishing and minimal material waste. Suitable for professional woodworking companies, window frame manufacturers, and building material suppliers.​ Djdpfx Afoxvp Sxepjkh

Year of construction: 2015, operating hours: 6,459 h, condition: used, lifting height: 3,740 mm, mast type: simplex, construction height: 2,680 mm, fork length: 2,000 mm, drive type: Diesel, load capacity: 4,500 kg, Diesel forklift Load center: 500 Mast type: Standard Technical condition: good Description: Rental machine Sideshift, fork positioner, Dedpfxsu D Sy Aj Afpjkh sideshifter, fork positioner 3rd valve 4th valve, working lights 2 front and 1 rear, full cab, front and rear wiper, heating, air conditioning, CE certificate, seat air leather, rotating beacon, writing console, key, rear view mirror, double pedal, mechanical parking brake, sun protection grille, radio, tires Continental SE black, STVZO

Condition: excellent (used), Year of construction: 2000, Jung Supromatic HF 50 EVO Jung Supromatic HF 50 EVO Surface Grinding Machine, year of manufacture 2000, in excellent, fully overhauled original condition. The machine comes from the technical center of a renowned German mechanical engineering company. Technical Data: Year of manufacture: 2000 Technical specifications Clamping surface (L x W in mm): 600 x 200 Maximum grinding area (L x W in mm): 600 x 250 Maximum magnet size (mm): 500 x 200 Maximum grinding wheel dimensions (mm): 225 (250) x 25 x 51 Table to spindle center distance (mm): Max. 400 Table longitudinal feed (reciprocating, m/min): 1 – 20 Creep feed (mm/min): 0 – 500 Grinding spindle drive speed (rpm): 800 – 4200 Power output kW (with creep feed): 1.6 – 2.2 Approximate machine weight: 2.0 t Accessories and Equipment: • Magnetic chuck • Coolant system • Machine feet • Grinding wheel About the machine: Dkjdpfx Ajwzmgysfpeh We offer a Jung HF 50 EVO surface grinding machine, year 2000, in excellent condition. The machine is, of course, fully functional and has only approx. 50 operating hours since its overhaul. All slides run very smoothly and evenly. Even at high speeds, the Jung operates very quietly. This newer generation of surface grinders is highly user-friendly and enables the production of surfaces with a low Rz value. Take the opportunity to inspect this machine under power on site and see its condition for yourself. Scope of overhaul: Mechanical service: • Complete mechanical overhaul • Hydraulics • Infeed mechanism • Lubrication • Cross and vertical adjustment • Grinding spindle • Wheel dresser • Repainting in new machine quality Geometric service: • Guideway grinding by the manufacturer (optional) • Scraping of guideways • Column realignment, measurement, possible scraping/grinding, refitting with pressure plates, inspection and preparation of guideways • Adjusting crosshatch at spindle head • Alignment of wheel dresser • Regrinding of table and magnet • Machine acceptance according to manufacturer’s test sheet Electrical service: • Replacement of complete wiring, all limit switches and pushbuttons • Conversion of X-axis from cam switch to contactless limit switches (HF 50) • New control cabinet • RSF position display (2- or 3-axis readout) • Magnet holding force control for 24V or EP magnetic chuck Control modernization: • New auxiliary control cabinet (operator panel top right) • Thyristor control for grinding spindle drive • Manual cylindrical wheel dressing with top dresser or side dresser (for Diaform operation)

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,186 h, load capacity: 1,600 kg, lifting height: 3,145 mm, free lift: 1,518 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,121 mm, battery capacity: 500 Ah, battery voltage: 48 V, fork length: 1,600 mm, Equipment: CE marking, UVV, full service history, gripper hydraulics, lighting, pallet forks, For Sale: Linde E16C-02 EVO Electric Forklift with 1600kg Lifting Capacity Are you looking for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium, offers a well-maintained Linde E16C-02 EVO, built in 2018 with 4,186 operating hours. This forklift is equipped with premium specifications that will optimize your internal logistics processes. Key Specifications: Lifting height: 3,145 mm Overall height: 2,121 mm Free lift: 1,518 mm Load capacity: 1,600 kg Independent side shift: Enables precise and flexible handling of various loads. Tyres: Fitted with four high-quality solid tyres Operation: Equipped with a single foot pedal for intuitive and efficient control. Accessories: Work lights, amber beacon, blue spot, and red side lighting for enhanced visibility and safety. Including charger: Comes with a matching charger, allowing immediate operation. Advantages of the Linde E16C-02: Dkodpfx Asxtb Umofpeh Excellent Maneuverability: Thanks to its compact design and innovative Linde combi-steer axle, this four-wheel forklift is perfect for use in narrow aisles, with minimal tyre wear and no floor damage. Ergonomic Design: The spacious cabin and intuitive controls, such as Linde Load Control and the twin-pedal system, ensure a comfortable working environment, boosting productivity. Reliable Performance: The powerful AC motors and Linde Load Control system deliver precise and efficient load handling. Low Maintenance Costs: Maintenance-free components like the AC motors and wet disc brakes minimize downtime and maintenance costs. This Linde E16C-02 is immediately available at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and discover how it can enhance your business operations. Interested? Contact 2Bro-Trading B.V. today to schedule a viewing!

Condition: like new (used), functionality: fully functional, Year of construction: 2020, operating hours: 2,884 h, load capacity: 1,800 kg, lifting height: 4,625 mm, free lift: 1,519 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,121 mm, battery manufacturer: Linde, battery model: 48v 700ah, battery capacity: 700 Ah, battery voltage: 48 V, Equipment: cabin, pallet forks, For Sale: Linde E18PH-02 EVO Electric Forklift with 1,800 kg Lifting Capacity Are you searching for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium, is offering a well-maintained Linde E18PH-02 EVO, manufactured in 2020 with only 2,884 operating hours. This forklift is equipped with high-quality specifications to optimize your internal logistics processes. Key Specifications: - Lift height: 4,625 mm Dkodpfxextbi Rj Afpoh - Overall height: 2,121 mm - Free lift height: 1,519 mm - Lifting capacity: 1,800 kg - Separate sideshift: Enables precise and flexible handling of various loads. - Tyres: Fitted with four brand new Trelleborg solid tyres - Controls: Equipped with a single pedal for intuitive and efficient operation. - Accessories: Work lights, orange beacon, blue spot, and red side lights for enhanced visibility and safety. - Charger included: Supplied with a matching charger, allowing you to be operational immediately. Advantages of the Linde E18PH-02: - Excellent Maneuverability: Thanks to its compact design and the innovative Linde combi axle, this four-wheel forklift is perfectly suited for narrow aisles, with minimal tyre wear and no floor damage. - Ergonomic Design: The spacious cab and intuitive controls, such as Linde Load Control and the single-pedal system, create a comfortable working environment, boosting productivity. - Reliable Performance: The powerful AC motors and Linde Load Control system provide precise and efficient load handling. - Low Maintenance Costs: Maintenance-free components such as the AC motors and wet disc brakes minimize downtime and maintenance expenses. This Linde E18PH-02 is immediately available at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and experience how it can enhance your business processes. Interested? Contact 2Bro-Trading B.V. today and schedule a viewing!

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 4,288 h, load capacity: 2,000 kg, lifting height: 5,475 mm, free lift: 1,869 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,471 mm, battery manufacturer: Hawker, battery model: 48V 775Ah, battery capacity: 575 Ah, battery voltage: 48 V, Equipment: CE marking, cabin, full service history, gripper hydraulics, lighting, pallet forks, seat heater, sideshift, For Sale: Linde E20PH-02 EVO Electric Forklift with 2,000 kg Load Capacity Are you looking for a reliable and efficient electric forklift for your business operations? 2Bro-Trading B.V. in Mol, Belgium, offers a well-maintained Linde E20PH-02 EVO, manufactured in 2018 with only 4,288 operating hours. This forklift comes with premium specifications to optimize your internal logistics processes. Key Specifications: - Lift Height: 5,475 mm - Overall Height: 2,471 mm - Free Lift Height: 1,869 mm - Load Capacity: 2,000 kg - Fork Positioner with Independent Sideshift: Enables precise and flexible handling of various loads - Tyres: Equipped with four brand new Trelleborg solid tyres - Controls: Single-pedal operation for intuitive and efficient handling - Accessories: Work and road lighting, an orange beacon, Bluespot and red side lighting for enhanced visibility and safety - Including Charger: Supplied with a suitable charger for immediate operational use Advantages of the Linde E20PH-02: - Excellent Manoeuvrability: Thanks to its compact design and innovative Linde combi-steer axle, this four-wheel forklift is perfectly suited for narrow aisles, with minimal tyre wear and no floor damage. Djdpfxoxtba No Afpokh - Ergonomic Design: The spacious cabin and intuitive controls, such as Linde Load Control and the single-pedal system, provide a comfortable working environment and boost productivity. - Reliable Performance: Powerful AC motors and the Linde Load Control system offer precise and efficient load handling. - Low Maintenance Costs: Maintenance-free components such as AC motors and wet disc brakes minimize downtime and servicing expenses. This Linde E20PH-02 is immediately available at 2Bro-Trading B.V. in Mol, Belgium. Visit us to see this forklift in action and experience how it can improve your business processes. Interested? Contact 2Bro-Trading B.V. today and arrange a viewing!

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 14,725 h, load capacity: 5,000 kg, lifting height: 3,750 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 2,870 mm, fork carriage width: 1,500 mm, fork length: 1,200 mm, drive type: Diesel, construction width: 1,350 mm, Diesel forklift Load center: 600 mm ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Standard Transmission: Dual pedal Speed class: 20 Condition: Refurbished, without warranty Technical condition: Good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80–100% Rear tire type: Pneumatic Rear tire size: 250-15 Dsdpfx Asxpyz Rjfpjkh Rear tire condition: 80–100% Description: Handover with new FEM 4.004 inspection including inspection booklet / NEW maintenance. If you have further questions, feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Visit our website fleischmann-foerdertechnik. We are happy to assist with leasing & financing, as well as delivery at favorable terms upon request. We also accept Linde equipment as a trade-in, even if you do not purchase a machine from us. Indicated operating hours were read at the time of listing. Subject to prior sale, changes, and errors. Sideshift, Fork positioner, Kaup integrated fork positioner with sideshift 3rd valve, 4th valve, rear work light, front work light, heater, soot filter, road approval (STVZO), full cab, air conditioning, safety light, single pedal, seat heating, LED, Comfort seat with PVC air suspension and seat heating.

Condition: ready for operation (used), Technical characteristics Double loading Advance by pneumatical tightening Dedpfoundguex Afpokh 2 motors Double blade : 250 and 175 mm Tables Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3,5 Kw Overall dimensions

Condition: new, functionality: fully functional, mileage: 50 km, power: 61.78 kW (84.00 HP), fuel type: gasoline, maximum load weight: 700 kg, overall weight: 1,865 kg, axle configuration: 4x2, gearing type: mechanical, emission class: euro6, loading space length: 2,300 mm, loading space width: 1,560 mm, Year of construction: 2025, Equipment: air conditioning, NEW READY FOR DELIVERY Gladiator EVO model Engine 1,250 cc - 84 HP (Petrol) Dodewiw H Hopfx Afpekh Air Conditioning Radio ABS + ESP Trilateral tipper Officine CUCINI Ext. dimensions mm 2,300 x 1,560 Useful capacity 700 Kg. 24 MONTH WARRANTY

Condition: used, functionality: fully functional, machine/vehicle number: H2X386X01128, Year of construction: 2020, operating hours: 13,899 h, load capacity: 2,000 kg, lifting height: 3,140 mm, free lift: 1,500 mm, fuel type: electric, mast type: duplex, construction height: 2,120 mm, fork length: 1,200 mm, empty load weight: 3,909 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X386X01128 Load center: 500 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Technical condition: Good Front tire type: Superelastic Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire condition: 80 - 100% Battery voltage: 48V Battery capacity: 750Ah Battery type: PzS Dkodpfx Aexnti Ssfpjh Battery year: 2020 Battery condition: 60 - 80% Description: Workshop-inspected with UVV certification Clamping fork, sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, roof cover, CE certificate, front/rear working lights, BlueSpot rear, side safety bars

Condition: used, Year of construction: 2009, functionality: fully functional, For sale is a used, fully functional semi-automatic miter band saw. 0° 330 mm 320 mm 450 x 320 mm + 45° 320 mm 300 mm 300 x 300 mm + 60° 210 mm 200 mm 200 x 200 mm - 45° 320 mm 300 mm 300 x 300 mm Dodpfx Aowigavefpjkh - 60° 210 mm 200 mm 200 x 200 mm Max. vise opening 455 mm Blade size 4500 x 34 x 1.1 mm Saw blade motor power 4.0 kW - three-phase Blade speed 15 - 100 m/min Accessories: 4.5 m roller conveyor, various saw blades

Condition: used, functionality: fully functional, machine/vehicle number: H2X392F01684, Year of construction: 2015, operating hours: 5,995 h, load capacity: 2,500 kg, lifting height: 3,700 mm, free lift: 200 mm, fuel type: diesel, mast type: simplex, construction height: 2,450 mm, fork length: 1,200 mm, drive type: Diesel, Diesel forklift Fahrgestellnummer: H2X392F01684 Load center: 500 ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Standard Transmission: Hydrostat Technical condition: Very good Front tires Type: Superelastic Front tires Condition: 80 - 100% Rear tires Type: Superelastic Rear tires Condition: 80 - 100% Description: Workshop checked, new UVV & inspection, new paintwork Sideshift, Dkedpfx Aetfmgdefpoh 3rd valve, rear working lights, front working lights, roof cover, windshield, CE certificate,

Condition: used, functionality: fully functional, machine/vehicle number: H2X392H01125, Year of construction: 2017, operating hours: 9,883 h, load capacity: 2,500 kg, lifting height: 4,050 mm, free lift: 150 mm, fuel type: gas, mast type: simplex, construction height: 2,675 mm, fork length: 1,200 mm, drive type: Treibgas, LPG forklift Chassis number: H2X392H01125 Load center: 500 ISO class: ISO class 2 = 1,000 – 2,500 kg Mast type: Standard Dkodstzg Inopfx Afpeh Transmission: Hydrostatic Condition: Refurbished with warranty Technical condition: Very good Front tires type: Superelastic Front tires condition: New Rear tires type: Superelastic Rear tires condition: 80 – 100% Description: Workshop inspected, new UVV & service inspection, new paintwork Double pallet clamp, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, CE certificate, safety light, joystick, wiper, single pedal, LED, seat,

Condition: used, machine/vehicle number: 26174, Year of construction: 2018, operating hours: 10,316 h, load capacity: 3,000 kg, lifting height: 3,350 mm, fuel type: diesel, mast type: simplex, construction height: 2,340 mm, Equipment: cabin, sideshift, Device details: Year of manufacture: 2018 Load capacity: 3000 kg Lift height: 3350 mm Recorded operating hours: 10,316 h Mast type: Standard Mast height: 2340 mm Dkedjw Nh T Aopfx Afpjh Dimensions (L/W/H): 2755 / 1337 / 2230 mm Operating weight: 4260 kg ---- Equipment: * Overhead guard * 3rd valve * 4th valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: * Sideshift * Fork positioner ---- Additional device information: Front pneumatic tires Rear superelastic tires Beacon light Radio Heated seat Single pedal control ---- The operating hours stated are generally based on the hour meter reading. We are happy to offer you suitable transport solutions. A further 250–300 forklifts, attachments, and sweepers are immediately available for you. Also for hire! We are happy to buy your USED equipment. Do you have questions? You can reach us during our business hours from 7:30 AM to 4:00 PM. We look forward to hearing from you! We speak English. Interim sale and errors for this offer expressly reserved. In dealer sales, the equipment is sold in its current condition and not refurbished. All information without guarantee, subject to errors and prior sale.

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,674 h, load capacity: 2,000 kg, lifting height: 6,225 mm, free lift: 2,119 mm, fuel type: electric, mast type: triplex, construction height: 2,721 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift Load center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Dual pedal Condition: Ready for operation and fully functional Technical condition: good Front tires type: Superelastic Front tires size: 200/50-10 Front tires condition: 60 - 80% Rear tires type: Superelastic Rear tires size: 140/55-9 Rear tires condition: 60 - 80% Battery voltage: 48V Battery capacity: 750Ah Dksdpsxnfffjfx Afpjh Battery manufacturer: AIM Battery type: PzS Year of manufacture (battery): 2016 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection book. For further questions, please feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. We are also happy to provide quotes for leasing, financing, and delivery at competitive rates. Trade-in of Linde equipment is also possible, even if you do not purchase a machine from us. The operating hours indicated were read as of the listing date. Subject to prior sale, changes, and errors. Sideshift, fork positioner, integrated fork positioner with sideshift, third valve, fourth valve, rear work light, front work light, heater, load protection guard, full cabin, full free lift, safety light, seat heating, LED lighting.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, SEMI-AUTOMATIC TURNTABLE, FOR PALLET WRAPPING WITH STRETCH FILM Power Prestretch Pallet Wrapper from the UK agent for Noxon (Robopac is manufacturered by the same company) Upward-downward carriage speed Top and bottom reinforcement wraps Dsdpfx Aoxwa Iyjfpokh Film tension Table rotation speed Ergonomic carriage stop at the end of the cycle Upward-downward cycle Only upward cycle Manual cycle Self learning cycle Altimeter and photocell delay VAT to be added to final price Loading ramp available at £250 plus VAT Delivery within 200miles available at £225 plus VAT

Condition: excellent (used), Year of construction: 2014, operating hours: 66,600 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, We offer you the following: Technical Data: Control: Heidenhain iTNC 530 HSCI Travel distances: - X-axis: 600 mm - Y-axis: 500 mm - Z-axis: 500 mm Main spindle: - Speed range: 20 - 18,000 rpm NC Rotary Table: - Clamping surface: 600 x 500 mm - Load capacity: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 - Number of tool pockets: 210 positions Equipment and Accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline Control - Direct measuring systems in the NC rotary/swivel table incl. table cooling - BLUM NT laser tool measurement - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Preparation for 3D quickSET - Hinged belt chip conveyor - ICS, 40 bar, 600 l tank, incl. rotating viewing window, sealing air, linear measurement systems, bed flushing - Rinsing pistol - Mechanical oil and emulsion mist separator - Air blast through spindle center - Mode of operation 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated arm robot - Pneumatic control and monitoring of the zero-point clamping system - Activation/deactivation of handling system via switch on machine operator panel - Additional rinsing in the machining area included - Preparation for job management included Djdexgnz Tepfx Afpekh - Operator panel arrangement on the left included - Power supply to machine table incl. 2-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 - 240 bar, pressure adjustment via proportional valve technology - Extension of rotary union to 4 channels included On-time hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the pictures is not included in the scope of delivery. The machine is expected to be available from October/November 2025. The ball screw drives and linear guides in the X and Z axes have been replaced. Accessories, depicted tools, and clamping equipment are only included if specifically mentioned in the additional information. Subject to changes and errors in the technical specifications and information. Prior sale reserved!

Condition: new, Year of construction: 2023, rebar bending machine evo 36 400 Volt 50 Hz 3 ph. capacity up to 36 mm at R=65kg/mm2 Dkedpohiyadjfx Afpoh weight 320 kg with 6 round tooling 50-60-70-80-95-120 mm 1 pc. square bolt foot pedal CE declaration

Condition: used, machine/vehicle number: 26160, Year of construction: 2018, operating hours: 13,578 h, load capacity: 5,000 kg, lifting height: 4,400 mm, fuel type: gas, mast type: simplex, construction height: 3,140 mm, Device details: Year of manufacture: 2018 Load capacity: 5000 kg Lift height: 4400 mm Recorded operating hours: 13,578 h Mast type: Standard Mast height: 3,140 mm Length/width/height: 3,196 / 1,448 / 2,430 mm Operating weight: 7,060 kg ---- Equipment: * Overhead guard * 3rd valve * Semi-cab * Front work lights * Rear work lights ---- Additional equipment information: Bluespot Reverse alarm Beacon ---- Dedpfx Afexm S Dfspokh The operating hours stated refer to the hours read from the meter. We are happy to offer suitable transportation for you. A further 250 - 300 forklifts, attachments, and sweepers are immediately available. Rental options available as well! We are happy to buy your OLD machine. Any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Subject to prior sale and errors in this offer. In B2B transactions, the device is sold as is, unrefurbished. All information is provided without guarantee; errors and changes excepted.