Used Mk4 for sale (220)

Condition: ready for operation (used), Year of construction: 2019, spindle motor power: 13,000 W, spindle speed (max.): 6,300 rpm, number of axes: 2, This EMCO E45 turn-mill centre was manufactured in 2019. It features a KK5 spindle with a bar capacity of 45 mm and a speed range up to 6300 rpm. The 12-position VDI30 tool turret supports 6 driven tools, enhancing versatility. Equipped with SINUMERIK 828D OPERATE control for precise operations and a robust design with a chip conveyor and high-pressure coolant system. Reach out for more information about this machine. • Connection: KK5 (DIN 55026) • Bar capacity: 45 mm • Drive power: 13 kW • Speed range: 0–6300 rpm • C-axis on main spindleTool turret • 12-position VDI30 axial • Directional logic for up to 6 driven tools • Driven tools: max. 4 kW / max. 16 Nm • Driven tools speed: 0–5000 rpmTailstock • Programmable, hydraulically actuated • Max. clamping force: 6000 N • Morse taper: MK4 • Hollow clamping cylinder incl. draw tubeControl & software • SINUMERIK 828D OPERATE • SHOPTURN dialog programming • USB interface • Network / Ethernet • 10.4" TFT color monitor • 3D simulationMedia & machine features • Machine light • Coolant system incl. pump (3.5 bar) • Hydraulic unit Nodpoyffgrjfx Ah Recp • Chip conveyor interface • CE certificate • DocumentationTool measurement (E45) • Measuring arm fixed in the work area • Tool measurement on the turret • Short setup times / precise measurement / cost-efficientWorkpiece clamping • 3-jaw chuck KK5 • Max. speed: 6300 rpm • Diameter: 20 mm • Soft + hard jawsOther (machine-related) • Water gun • Air to spindle • Oil/coolant separator • Automatic coolant monitoring • Electronic handwheel • Tool change guard • Hydraulic connections • Pneumatic connections • Machine packaging: pallet + roll-up cover Additional equipment Bar feeder / magazine (SL1200 – as referenced) • Bar length: 850–1200 mm • Bar diameter: Ø 8–95 mm • Max. feed rate: 60 m/min • Bar change: approx. 3 s • Magazine change: approx. 15 s • Material support area: 550 × 1210 mm • Material capacity: 10 × Ø 55 mm • Operating side: right • Power supply: 240 V DC/DC • Air supply: 6 bar • Dimensions: 1700 × 1250 × 1090–1380 mm • Weight: approx. 500 kg • Safety device: CE • High-speed function • DocumentationSpindle extension (for bar feeder use) • E45 / MT45 / HT45 → DM45 • For 45 mm spindle • Short bars up to 1100 mm • With reducing sleeves (3 pieces) • Required for use with SL1200Chip conveyor • Hinged belt conveyor • Discharge height: 1200 mmHigh-pressure coolant unit • 14 bar / 50 Hz • Additional high-pressure pump • For tools with internal coolant • Interface & softwareRobot interface • PROFI-NET interface • 24 V signals • Safety release • Automatic/manual operation switchingAdditional components • PC keyboard USB (QWERTY) • Machine status LED: Green (Automatic), Red (Alarm), White (Material handling)Installation & mounting hardware • 4× vibration absorbers • 4× mounting brackets • 4× heavy-duty anchorsParts collection device • Pneumatically operated • Max. part length: 120 mm • Max. diameter: 45 mm (51 mm) • Max. weight: 2 kg • Collection box / conveyor belt

Condition: ready for operation (used), Year of construction: 2005, operating hours: 15,731 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 176 mm, travel distance Z-axis: 520 mm, spindle motor power: 11,000 W, overall weight: 3,400 kg, controller manufacturer: FANUC, controller model: Series 0i Mate-TB, This Dugard Eagle 200 was manufactured in 2005. A robust horizontal turning machine featuring a maximum turning diameter of 280 mm and length of 508 mm. It includes a main spindle bore of ø62 mm and a bar capacity of ø52 mm. The spindle operates at speeds up to 4500 rpm, supported by a FANUC motor. A large set of accessories and equipment is included. Contact us for more information about this machine. • Capacity • Maximum turning diameter: 280 mm • Maximum turning length: 508 mm • Axis travels and rapids Ncsdpfx Ahjx D H Tve Rop • Z-axis motor power: 1.4 kW (1.8 HP) • Z-axis rapid speed: 30 m/min • X-axis motor power: 1.4 kW (1.8 HP) • X-axis rapid speed: 30 m/min • Spindle • Spindle bore: ø62 mm • Bar capacity: ø52 mm • Spindle nose/taper: ASA A2-6 • Taper angle (conicity): 1/20 • Tooling/Turret • Turret type: Hydraulically clamped • Maximum number of tools: 10 • Boring tool diameter / number of slots: ø32 mm / 5 • Turning tool shank size / number of slots: 20 mm × 20 mm / 5 • Tailstock • Tailstock type: Fixed • Tailstock taper: MK4 • Sleeve diameter: ø75 mm • Sleeve travel: 425 mm (note: also listed as 100 mm below, as provided) • Tailstock sleeve travel: 100 mm (as provided) • Dimensions and weight • Bed height to spindle center: 900 mm • Bed-to-spindle-center distance: 290 mm • Footprint: 3429 mm × 2569 mm • A large set of accessories and equipment is included

Condition: excellent (used), Attachment holders, standard holders and accessories, spiral drill bits, BILZ spiral drill bits, reaming bits, BILZ reamers, BILZ holders, tool holders, drill bit mounts, twist drills -Mounted tool holder: 8 pieces -Recordings: MK5, MK4, MK3 -Spiral drill bits: 35 pieces -Sizes: Ø38 mm - Ø95 mm -Dimensions: see photos Njdpfx Ajyrgwxsh Rscp -Submission/Price: complete -Transport dimensions: 550/300/H70 mm -Weight: 28 kg

Condition: good (used), Drill bit, twist drill bit, drill bit, for drilling rig, drilling center -Quantity: 53x NC twist drills with tightening thread Ncjdpec Innkofx Ah Rop -Diameter: 8x Ø32mm 9x Ø34mm 8x Ø36mm 6x Ø38mm 1x Ø39mm 8x Ø40mm 7x Ø41mm 6x Ø42mm -Intake: MK4 -Type: HSS -according to pictures - Sale: only complete -Weight: 84kg

Condition: good (used), Reamer, twist drill, drill bit -Manufacturer: Gühring / Maysso / Titexplus, twist drill 7 pieces Ø 29 - 48 mm Ncjdpfx Aerqin Hsh Rop -Type: Two-cutter, MK4 chucks -Size/Quantity: see photo parts list -Price/Delivery: complete -on request: different sizes/quantities available from additional stock -Transport dimensions: 340/290/H45 mm -Weight: 12.1 kg

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160 mm Distance Between Centres: 800 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Ncodpjym Ncgjfx Ah Rjp Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock Ncedpjvygwwjfx Ah Rsp measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2011, Technical details: bore capacity in steel (diameter): 35 mm throat: 350 mm bore stroke: 180 mm threading: ST M 24 mm spindle taper MT: MK4 spindle speed:: 50 - 1450 U/min Distance spindle/table max.: 780 mm table clamping surface:: 560 x 560 mm weight of the machine ca.: 500 kg Nsdpfsyli Sfox Ah Recp dimension machine xH: 0,73 x 0,56 x 0,22 m

Condition: repair required (used), Year of construction: 2017, functionality: not functional, machine/vehicle number: 179057653, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 axes travel (working stroke): 335/289 mm / Rapid traverse in X: 30 m/min - Z1/Z2 axes travel: 560/494 mm / Rapid traverse in Z: 30 m/min - Fully enclosed with automatic door opening, supporting manual or automatic loading Main Spindle - Spindle according to DIN 55026: Size A6 - Max. speed: 4,500 rpm - Power at 100% / 40% duty cycle: 23 / 18 kW - Torque at 100% / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Toolholder with Powered Tools - Cylindrical shank holders per DIN 69880: 8 - VDI40 - Max. tool length: 130 mm - Number of positions: 1 x 8 - Max. speed: 4,500 rpm - Max. torque at 10% / 100% duty cycle: 27 Nm / 14 Nm Turret Configuration X2/Z2: Toolholder with Powered Tools - X-HOT unit for polygonal turning, max. eccentricity (stroke): 8 mm - X-HOT tool clamping system: HSK 32S Njdpoxxinfofx Ah Rscp Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3,000 mm (6,477 mm with chip conveyor), Width = 3,000 mm, Height = 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design for optimum chip removal, suitable for manual or automated loading/unloading - Siemens 840D control, NC1 and NC2 axes - High precision: Positioning accuracy in X, Z axes ±0.002 mm (Heidenhain linear scales) - Powerful main spindle with a wide speed range - Live tooling extends machining capabilities to drilling and milling - Tool life monitoring - Chip conveyor: Knoll - Coolant system filtration up to 40 bar: Knoll FKA/1400 - Workpiece presence detection with low pressure sensor - ROBOT AUTOMATION INFRASTRUCTURE INSTALLED - Fully enclosed work area; integrated lighting - Documentation: available both electronically and as hard copy Machine status: Not operational - Missing: valve for emulsion circuit and inductive sensors

Condition: used, Year of construction: 2014, functionality: limited functionality, machine/vehicle number: 179057784, Technical characteristics: Working Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance from spindle nose to tailstock reference point: 639 mm - X1/X2 travel (working stroke): 335 / 289 mm - Rapid traverse in X: 30 m/min - Z1/Z2 travel: 560 / 494 mm - Rapid traverse in Z: 30 m/min - Standard enclosure with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface as per DIN 55026: Size A6 - Max. speed: 4500 rpm - Power at 100 / 40% duty cycle: 23 / 18 kW - Torque at 100 / 40% duty cycle: 146 / 115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret X1/Z1: Tool Carrier with Live Tools - Cylindrical tool holder interface as per DIN 69880: 8 x VDI40 - Max. tool length: 130 mm - Tool stations: 1 x 8 - Max. speed: 4500 rpm - Max. torque (10% duty cycle): 27 Nm, (100% duty cycle): 14 Nm Turret X2/Z2: Tool Carrier with Live Tools - X-HOT unit for polygonal machining, max. eccentricity/stroke: 8 mm - X-HOT tool holder clamping system: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length = 3000 mm (6477 mm with chip conveyor), Width = 3000 mm, Height = 3650 mm - Weight: 11,000 kg Main Features and Capabilities - Vertical design: Optimal chip removal, manual or automatic loading/unloading - Control: Siemens 840D, controls NC1 and NC2 - High precision: Positioning accuracy in X and Z axes ±0.002 mm (Heidenhain linear scales) - Main spindle: High power, wide speed range - Live tools: Allows drilling and milling operations - Tool life monitoring - Chip conveyor / Coolant: Knoll - Coolant filtration unit, max. 40 bar: Knoll FKA/1400 - Part presence detection system with low air pressure sensor - Automation infrastructure: Prepared for robot integration - Fully enclosed work area with working area lighting Ncsdpfx Ahoxw R Rfo Rjp - Documentation: Electronic and hardcopy available Machine condition: Working only on X1/Z1 – X2/Z2 operational, but XHOT not available

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Tool Turret with Driven Tools - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Nodpfx Asxwmf Seh Rocp Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm - X-HOT tool holder interface: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.

Condition: used, Lathe, turning machine, lead screw lathe, lead screw lathe -Handover: in the current condition as viewed -Condition: Gearbox makes noise (video) -Manufacturer: Colchester, Leadscrew and Feedscrew Lathe Type Triumph 2000 -Turning length: 1300 mm -Turning Ø over bed: 390 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 55 mm -Spindle speeds: 22 - 2000 rpm -Three-jaw chuck: Ø 250 mm -Accessories: Tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 960/2435/H1640 mm Ncjderbm T Dspfx Ah Rop -Weight: 1327 kg

Condition: used, High-speed milling spindle HENNINGER type 814 / 5131 / 1:5 / 15000 Speed max. 15000 rpm at 70% ED Gear ratio 1:5 Power transmission up to approx. 2.5 kW Njdsf Axn Ujpfx Ah Rjcp Front dimension 110 mm (machine spindle to clamping nut) Tool holder MK4 with M16 tightening thread Collets type OZ16 Ø 6 / 8 / 9 / 10 / 11 / 12 / 12.5 / 13 / 14 mm dead weight 6.5 kg good condition

Condition: used, Tool grinding machine, twist drill grinding machine BORA -- BI-EMME s.n.c. (Italy) Type 1/BM 40 No. 49697 Year of manufacture 1997 Grinding range Ø 3 - 40 mm Center angle 40° - 180 Motor power 1.1 kW Grinding wheel dimension max. Ø 200 mm Grinding wheel speed 2840 rpm Mains connection 400 Volt, 50 Hz Nedpenzt A Hsfx Ah Rocp - For grinding standard drills and other tools with 1, 2, 3, 4 or 6 cutting edges (step drills, taps, countersinks, drills with a thick core and drills with special grinding) - Precision six-jaw chuck Ø 125 m - pointing device (motor power 0.18 kW) - For left and right cutting drilling tools thanks to interchangeable cams - Cam disks easily interchangeable for 2 or multi-bladed tools - 4 cam disks - Centering arbor for MK1, MK2, MK3, MK4 - A white grinding wheel with a diameter of 170 mm and a width of 40 mm is installed - Metal base with door and shelf - Wet grinding unit shown opposite - Operating instructions per PDF Space requirement L x W x H 900 x 850 x 1250 mm Weight 220 kg Very good condition

Condition: used, 1 cylindrical grinding machine Manufacturer: Tschudin Model: HTG 400 Year of manufacture: 1967 Centre distance: 400 mm Centre height: 100 mm Taper: MK4 Spindle speed: Max. table travel: 420 mm Table swivel at 15° Nedpfxjyf Dn Uo Ah Rocp Grinding wheel: Ø 300 mm Insertable tailstock MK3

Condition: good (used), Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve Nsdpfx Aeylkunoh Rocp -Morse taper sleeve: MK4 4 pieces -Type: MK5/4 / MK5/3 / MK5/2 -Price/Fee: complete -Transport dimensions: 180/90/H170 mm -Weight: 8.1 kg

Condition: excellent (used), Quick-change adapter (28486) Make EMUGE Type KSN4-MK4 compatible with Bilz WES 3 holders Ncsdpfotrnigjx Ah Rop

Condition: good (used), Year of construction: 1956, Heavy lathe, turning machine, lathe, center and feed screw lathe, center and feed screw lathe -Manufacturer: Weisser, lead screw lathe type PF200 -Turning length: 1340 mm -Turning Ø over bed: 420 mm -Turning Ø over support: 240 mm -Spindle bore: Ø 41 mm Ncsdpfx Ahotzf N Ro Rjp -Spindle speeds: 31.5 - 1400 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl., see photos -Tailstock mount: MK4 -Drive motor: 2.5/3.5 kW -Dimensions: 2670/1000/H1230 mm -Weight: 1450 kg

Condition: excellent (used), Year of construction: 1972, Precision lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: VDF Heidenreich Harbeck, lead screw and feed screw lathe type 24R0 -Machine bed: hardened -Turning length: 1230 mm -Rotation diameter over bed: 500 -Turning diameter over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 5.5 kW -Accessories: 1x bezel, 7x Multifix tool holders, see photos -Dimensions: 1180/3050/H1345 mm Ncsdjw Sxgxjpfx Ah Rep -Weight: 1907 kg

Condition: new, Year of construction: 2026, The CORMAK TORNADO 460x1000 universal lathe is a heavy-duty, high-precision machine designed for versatile metalworking operations, including turning, drilling, threading, and polishing, making it suitable for workshops and industrial production. Key Advantages Versatile applications – external and internal cylindrical and conical turning, drilling, reaming, polishing, and threading across a wide range of sizes. Powerful 5.5 kW motor – smooth operation even under heavy loads. Large spindle bore ø82 mm – allows machining of long and heavy shafts. 2-axis digital readout with optical scales – improves accuracy and operator comfort. Removable bridge – accommodates workpieces up to ø690 mm × 240 mm. Rigid cast-iron construction – 300 mm wide hardened and ground bed minimizes vibrations and ensures long service life. Construction and Technology The lathe’s foundation is a massive, precisely machined cast-iron bed ensuring maximum stability. The spindle, equipped with a D1-8 spindle nose and supported by reinforced bearings, provides high rigidity and smooth operation at speeds ranging from 25 to 2000 rpm. Hardened and ground gears in the spindle drive offer durability and quiet operation even under continuous use. Precision and Performance 2-axis digital readout (X & Z) – precise tool positioning with repeatable results. Joystick for rapid traverse – simplifies cross-slide and top-slide movements, reducing setup and finishing times. Thread dial indicator – easy thread engagement without manual calculation of turns. Standard Equipment 3-jaw chuck 250 mm with left/right jaws 4-jaw chuck 320 mm with left/right jaws Fixed and live centers 2-axis digital readout (optical scales) Reducing sleeve MK7 → MK4 Change gears, coolant system, work lighting Fixed center MK4, lubrication system, tool set CE-compliant guards, manual (PL), declaration of conformity Optional Equipment Turret head MK4 Drill spindle MK4/B16 Drill chuck 3–16 mm / B16 HSS-Co5 cobalt drill set 1–13 mm Coolant ES-12 1L Taper turning attachment Technical Specifications Parameter Value Swing over bed ø460 mm Swing over cross-slide ø274 mm Swing in gap (diameter × width) 690 × 240 mm Center height 230 mm Distance between centers 1000 mm Njdpsvzzffsfx Ah Recp Bed width 300 mm Max tool post size 25 × 25 mm Total cross-slide travel 290 mm Total top-slide travel 120 mm Spindle bore ø82 mm Spindle nose D1-8 Spindle taper ø90 mm (1:20) Number of spindle speeds 12 Spindle speed range 25–2000 rpm Lead screw diameter & pitch ø35 mm × 6 mm Inch threads (TPI) 2–112 TPI (60) Metric threads 0.1–14 mm (41) Threads per inch (gear) 4–112 D.P. (50) Gear modules 0.1–7 M.P. (34) Longitudinal feed 0.054–3.04 mm/rev (42) Cross feed 0.037–2.048 mm (42) Tailstock quill travel 120 mm Tailstock quill diameter ø60 mm Tailstock gear module MT #4 Spindle motor power 5.5 kW Coolant pump motor 0.09 kW Machine dimensions (L×W×H) 2170 × 1040 × 1340 mm Net/Gross weight 1750 / 2000 kg

Condition: new, Year of construction: 2026, The ZX7045 B1 DRO milling/drilling machine is an advanced tool created for precision metalworking. It is ideal for drilling, reaming, expanding holes up to 45/40 mm in cast iron, as well as threading screws up to M12 mm. With the ability to mill up to 80 mm wide, notch up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version is distinguished by its auto-feed of the spindle, which increases work efficiency. In addition, it is equipped with a digital readout, which increases the precision of operations, and a cooling system, taking care to maintain the optimum temperature during machining. This tool is ready to use right away, available from stock. Ideal for professionals who demand high quality and performance in metalworking. Product features HEAVY, STABLE CAST IRON AUTOMATIC SPINDLE FEED HEIGHT OF THE MILLING MACHINE IS ADJUSTABLE ON THE SLIDE AND NOT ON THE COLUMN ADDITIONAL LIQUID COOLING SOLID CROSS TABLE WITH PRECISION GROUND SURFACE DOVETAIL GUIDES, QUIET OPERATION THANKS TO GROUND GEARS LEFT AND RIGHT ROTATION HEAD ROTATABLE +/- 900 ADJUSTABLE HEAD HEIGHT DIGITAL READOUT Base available as an optional extra TECHNICAL DATA Drilling capacity in steel 32 mm Drilling capacity in cast iron 45 mm FACE MACHINE DIAMOND 80 mm HANDS CAPACITY 28 mm SPEED RPM 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm. (6/12) MANDREL HANDLE MT 4 Spindle feed 125 mm (AUTOMATIC FEEDING) DIMENSIONS OF THE WORKING TABLE 820 mm x 240 mm DIMENSIONS OF BASE 580 x 600 mm MAX. Spindle distance from the table 445 mm Spindle distance from column surface 260 mm AXIS MOVEMENT X/Y/Z 515/175/430 mm PINOLLE SPEED 0.12; 0.18; 0.25 mm/rev. 90° CLOCKWISE/LEFT HAND ROTATION MOTOR POWER 1,8 kW 2,5 hp Ncsdpfx Aoud H H Ueh Rep POWER SUPPLY 400 V weight 350 kg Available accessories drill chuck shank MK4/B18 digital readout handy tools drill chuck 3-16 mm/B18 reduction sleeve MK4/MK3 reduction sleeve MK3/MK2 English language user manual

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 32 mm Distance from spindle to base 340–1125 mm Distance from spindle axis to column surface 330–890 mm Spindle extension 215 mm Njdpfxoi D Daqo Ah Rscp Spindle taper MK4 Spindle speed 75–1200 rpm Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed (3) 0.10; 0.16; 0.25mm/turn Horizontal plane rotation angle 180° Main motor power 2.2 kW Worktable dimensions 500×330×294 mm Machine dimensions 1400×660×2100 mm Weight 950 kg The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: new, Year of construction: 2026, Machine Characteristics Heavy, Stable Cast Iron Body: A solid structure based on a heavy cast-iron frame ensures stability and durability, even during intensive use. Milling Height Adjustment on the Support: A unique height adjustment system located on the support, rather than on the column, allows the machine to be adapted to various applications. Massive Cross Table for Milling/Drilling: The large, precisely ground table surface provides a solid base for a wide range of projects. Dovetail Guides: Innovative dovetail-shaped guides ensure smooth movement along all three axes, resulting in excellent machining precision. Quiet Operation Thanks to Ground Gears: Ground gears ensure quiet operation, improving working comfort in the workshop. Left and Right Spindle Rotation: Operate the tool in both directions to suit different tasks. Tiltable Head (+/- 90°) and Adjustable Head Height: Flexible angle adjustments and head-height control provide full machining versatility. Ncedpfsx Dkr Nox Ah Rsp Digital Longitudinal and Cross Readouts Additional Options, Additional Benefits The ZX 7045E DRO version is available immediately from stock, and you also receive a free accessory set: Drill chuck Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 ZX 7045E DRO Milling-Drilling Machine The ZX 7045E DRO is a high-precision, advanced machine tool designed for reliable metalworking performance. Equipped with digital readout systems (DRO) and a robust construction, it enables accurate milling and drilling across a wide range of materials. Thanks to its versatility and reliability, the ZX 7045E DRO is an ideal solution for professional workshops, meeting the demands of even the most complex machining applications. (The base is available as an optional accessory.) Technical Specifications Maximum drilling diameter: 45 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 28 mm Maximum thread diameter: 12 mm Spindle quill travel: 100 mm Spindle taper: MT4 Spindle speeds (6 speeds): 95, 170, 280, 540, 960, 1600 rpm Maximum distance spindle nose–table: 460 mm X / Y / Z travel: 500 / 210 / 425 mm Distance spindle–column surface: 245 mm Worktable dimensions: 730 × 210 mm Base dimensions: 400 × 600 mm Motor (S1/S6): 1500 W / 2100 W, 400 V Machine dimensions (with base): 1080 × 770 × 1460 mm Weight: 278 kg Included Equipment 2-axis digital readout MK3/B18 drill chuck arbor Hand tools 3–16 mm drill chuck (B18) Reducing sleeve MK4/MK3 Reducing sleeve MK3/MK2 User manual

Condition: new, Year of construction: 2026, The CORMAK ZS-40B industrial geared pillar drill is a solid tool with great potential. Equipped with a height-adjustable swivel head, automatic threading device and a precision handwheel, it ensures flexibility and accuracy in work. The powerful engine guarantees high drilling efficiency, and the solid construction and hardened oil gear wheels ensure stability and durability. The drill comes with a set of threading holders, extending the capabilities of this professional tool. Additionally equipped with autofeed and cooling. Machine characteristics Very high work flexibility thanks to the swivel, height-adjustable head Cooling system L/R rotation, automatic threading device Precision handwheel with depth scale Hardened oil gear wheels High stability and quality of processed elements thanks to a solid base. Powerful motor ensuring good drilling performance. Rigid, thickened column with a polished surface Large turntable with height adjustment Possibility to set a vice Technical data DRILLING DIAMETER (CAST IRON/STEEL) Nedpfjridv Sex Ah Recp 40/32mm THREADING (CAST IRON/STEEL) M32/M24 COLUMN DIAMETER 115mm SPINDLE DISTANCE FROM THE COLUMN AXIS 260mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 754mm MAX. DISTANCE OF SPINDLE TIP TO BASE 1270 mm SPINDLE TAPER MK4 SPINDLE SPEED 50 - 2520 rpm. NUMBER OF GEARS 6 FEED RANGES 0.12; 0.18; 0.25 mm/rev DIMENSIONS OF THE WORKTABLE SURFACE 354x575mm OVERALL HEIGHT 2120mm ENGINE POWER 1.5 kW POWER 400V/50Hz WEIGHT U 350kg

Condition: new, Year of construction: 2026, Characteristics of the ZS-40HS gear drill Are you looking for a professional geared pillar drill for industrial use? Pay attention to the CORMAK ZS-40HS model. This robust and efficient drill has been specially designed to meet the most demanding industrial tasks. Very high work flexibility is one of the main advantages of the CORMAK ZS-40HS drill, thanks to the height-adjustable rotating head. This allows for convenient and precise drilling at various angles and depths. Additionally, the drill is equipped with an automatic threading device, which greatly facilitates the machining process. A precision handwheel with depth scale and hardened oil gear wheels ensure accuracy and durability during use. The solid base of the drill guarantees stability and high quality of the processed elements. The powerful engine of the CORMAK ZS-40HS drill ensures excellent drilling performance, regardless of the material. A stiff, thickened column with a polished surface ensures stability and precision during work. A large height-adjustable rotary table and the ability to set a vice allow the tool to be conveniently adjusted to the user's individual needs and preferences. Additionally, the set includes a set of threading holders, which is a practical extension of the drill's capabilities. Technical parameters DRILLING DIAMETER (CAST IRON/STEEL) 40/32mm THREADING (CAST IRON/STEEL) M32/M24 COLUMN DIAMETER 115mm SPINDLE TRAVEL 120mm SPINDLE DISTANCE FROM THE COLUMN AXIS 272.5mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 745mm MAX. DISTANCE OF SPINDLE TIP TO BASE 1200 mm SPINDLE TAPER MK4 SPINDLE SPEED 95-1600 rpm Ncjdpfx Ahsriduxs Rsp NUMBER OF GEARS 6 DIMENSIONS OF THE WORKTABLE SURFACE 455x385mm BASE DIMENSIONS 385x330mm OVERALL HEIGHT 2100mm ENGINE POWER 1600 W POWER 400V/50Hz WEIGHT 310 kg Additionally included: Reduction sleeves MK2, MK3, MK4, Drill chuck 16 mm, INCLUDES A FREE THREADING HOLDERS SET!