Used Mondiale Celtic 14 for sale (14)

Condition: used, Year of manufacture: 1980s/90s Technical data: Centre height: 185 mm Centre distance: 750 mm Turning diameter over bed: 370 mm Spindle bore: 36 mm Bed width: 250 mm Speed range: 38 - 1600 rpm Tailstock taper: MT 3 Quill stroke: 110 mm Dimensions (W x D x H), approx.: 1950 x 900 x 1200 mm Weight, approx.: 800 kg Equipment: - 3-jaw chuck, make: Röhm, ø 200 mm - Quick-change tool post with 4 holders Csdpsydk Hhjfx Aa Norb - Bed stop - Chip tray

Condition: used, turning diameter over bed 420 mm turning diameter over slide rest 290 mm turning length 900 mm turning diameter in the gap mm turning speeds 40 - 2000 U/min centre height 210 mm spindle bore 38 mm total power requirement 4,0 KW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,4 x 1,1 x 1,3 m Lead and feed spindle lathe - 3-jaw chuck 220mm Cedpfjvki Efox Aa Nsrb - Quick-change tool holder with 5 cassettes - Steady rest - Chip tray - Operating instructions

Condition: good (used), Lathe, turning machine, lead screw lathe, lead screw lathe -Manufacturer: Mondiale, lead screw lathe type Celtic 20 -Turning length: 1200 mm -Turning Ø over bed: 440 mm -Turning Ø without bed: 640 mm Codeh Uuy Ropfx Aa Njrb -Turning Ø over support: 280 mm -Spindle bore: Ø 45 mm -Spindle speeds: 22 - 1000 rpm -Three-jaw chuck: Röhm Ø 250 mm -Accessories: incl. bezel, tool holder/tools see photos -Tailstock mount: MK4 -Dimensions: 1120/2230/H1215 mm -Weight: 1276 kg

Condition: like new (used), Horizontal lathe Diameter above the bed 385mm Distance between centers: 900mm Spindle bore (mm) 51,5 Diam. above the carriage (mm) 220 Spindle speeds 38 - 1600 (16x) Cjdpfog R Sm Ijx Aa Norb Motor power kW 2.94 Voltage (V) 380 Hertz (Hz) 50

Condition: ready for operation (used), L&Z Lathe MONDIALE LALLIC 16 N / incl. Acurite / 3-axis digital readout - Centre height: 165 mm - Swing over bed: 325 mm - Distance between centres: 1000 mm - Spindle bore approx. 42 mm - 3-axis digital display ACU-RITE - Speed range: 45–2000 rpm - Automatic longitudinal/cross feeds - Tailstock Morse Taper 4 Cedpfx Aaoy N Ecis Nerb - Thread cutting: metric / imperial etc. - Quick-change toolholder - Three-jaw chuck - Electrical chuck guard - Chip backsplash Dimensions: L×W×H 2.1×1.2×1.6 m / Weight: 1700 kg Errors and omissions excepted.

Condition: new, spindle diameter 130 mm Crsdpfxeyuqgco Aa Njb x-travel 3000 mm y-travel 2000 mm z-travel 2000 mm w-axis 700 mm table load 10.000 kg Table dimensions 1600x1800 mm Control Fanuc 31iMB voltage 400 V number of spindle speeds 35-3000 U/min taper ISO 50 Tool changer 60 total power requirement 20/30 kW

Condition: used, manufacture MONDIALE type Gallicop mm In our assessment, the machine is in good used condition. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Codpexx A I Sjfx Aa Norb Prior sale is reserved.

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 3,500 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,650 mm, spindle motor power: 15,500 W, total height: 2,050 mm, total width: 2,225 mm, overall weight: 4,400 kg, controller manufacturer: FANUC, controller model: Oi-TC, product length (max.): 3,690 mm, number of axes: 2, Horizontal turning machine manufactured in 2008. This MONDIALE BNC-2260XL features a maximum turning length of 1500 mm and a swing over bed of 550 mm. It includes a bar capacity of 69 mm and a maximum workpiece weight of 2000 kg. If you are looking to get high-quality turning capabilities, consider the MONDIALE BNC-2260XL machine we have for sale. Contact us for further details regarding this machine. • Swing over bed: 550 mm • Swing in gap: 790 mm • Swing over cross slide: 310 mm • Max. turning length: 1500 mm • Bar capacity (hyd. chuck cylinder): 69 mm (91 mm option) • Gap length from spindle nose surface: 283 mm • Max. workpiece weight (with tailstock): 2000 kg • Spindle speed range (choice 1): 80–3500 rpm (82 mm bore) • Spindle speed range (choice 2): 80–2400 rpm (82 mm/106 mm bore) • Spindle nose: A2-8 / D1-8 (82 mm); D1-8 / A1-11 (106 mm) • Spindle hole diameter: 82 mm (std.) / 106 mm (option) • Main motor power: 11/15.5 kW (std.) / 15/22 kW (opt.) • Number of tool stations: 8 • Tool shank: 40 mm • Turret indexing time: 0.42 s (BARUFFALDI) • X/Z axis rapid traverse: 15 m/min • Positioning accuracy: 0.005 mm • Repeatability: 0.005 mm • X axis feed motor torque: 9.3 Nm • Z axis feed motor torque: 14.8 Nm • Ballscrew X axis: 32×5-C5 Crodpfoyrq T Rox Aa Neb • Ballscrew Z axis: 45×10-C5 • Tailstock quill stroke: 150 mm • Tailstock quill diameter: 80 mm (std.) / 100 mm (opt.) • Tailstock quill taper: MT 5 • Coolant pump motor: 450 W • Coolant pump capacity: 55 L/min • Lubrication pump motor: 25 W Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1980, turning diameter over bed 410 mm turning diameter over slide rest 220 mm turning length 1000 mm centre height 205 mm spindle bore 46 mm spindle turning speed range 40 - 2000 U/min total power requirement 22,0 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,42 x 1,3 x 1,55 mm Lathes with: - Copying attachment - Forkardt 3-jaw chuck F250 Cedpsyt R Iwofx Aa Nerb - Multifix tool post - Coolant system - Machine light - Chuck guard - Chip tray - Chip guard wall - Foot brake

Condition: new, spindle passage 230 mm turning diameter over bed 970 mm turning diameter over slide rest 720 mm Control Fanuc OiTD turning length 2200 mm total power requirement 37 kW Year of manufacture 2013 Control: Fanuc OiTD Other controls possible Turning length (mm) 2200 Max. turning diameter (mm) 970 Max. turning diameter over slide (mm) 720 Spindle diameter (mm) 230 Diameter range (mm) 850 Speed: 500 kW 37 Voltage: 400V Hz 50 Including: 4-jaw chuck, Ø 800 mm rear Pneumatic 3-jaw chuck, Ø 600 mm front The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity Crjdpoyqupasfx Aa Neb More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2015, functionality: fully functional, turning diameter over bed 1300 mm turning diameter over slide rest 900 mm turning length 8000 mm spindle diameter 153 mm total power requirement 37 kW Turning length (mm) 8000 Max. turning diameter (mm) 1300 Max. turning diameter over slide (mm) 900 Max. turning diameter in the offset (mm) 1580 Spindle diameter (mm) 153 Speed ??7 - 500 (12x) kW 37 Voltage 400V Hz 50 Powered tailstock, powered quill, coolant system, 4-jaw chuck Ø 1,000 mm Steady rest roller type Ø 60 - 300 mm Steady rest roller type Ø 200 - 600 mm Taper turning attachment, 4-way toolpost The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Credpfx Asyquiyea Nob About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 110 mm x-travel 2000 mm y-travel 1700 mm Control Fanuc spindle taper ISO 50 z-travel 1400 mm Table area 1250x1500 mm Table load 5000 kg spindle turning speed range 35-3000 U/min Tool changer 60 total power requirement 18,5 / 22 kW weight of the machine ca. . t dimensions of the machine ca. 1250 x 1500 mm Fanuc 31 iMB (Manual Guide i) control system Other controls such as Siemens, Heidenhain, etc. are possible W-axis 550 Chip bucket Coolant system 20 bar Table guards Cedpeyquf Iefx Aa Njrb The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), functionality: fully functional, 75mm clearance 500mm chuck with rotating jaws Max workpiece diameter 640mm Crjdpfeqwgz Usx Aa Nob

Condition: used, turning diameter over bed 410 mm turning diameter over slide rest 260 mm turning length 1000 mm Codpfxowz Ruzj Aa Nsrb turning speeds 40 - 2000 U/min centre height 205 mm spindle bore 50 mm total power requirement 4,5 KW weight of the machine ca. 1,6 t dimensions of the machine ca. 2,4 x 1,3 x 1,5 m Leadscrew lathe - with copying device - 200mm 3-jaw chuck - 2x Multifix quick-change tool holders - Live center - Machine light - Chip tray