Used Monitor for sale (4,547)

Condition: good (used), Year of construction: 2015, passenger car, car, car -Accelerator pedals on the left and right. Electronically switchable. -Power: 100 kW / 136 hp -Fuel type: diesel -Color: black -Transmission: Automatic transmission DCT -Displacement: 2143 cc -First registered 13.04.2016 -Number of holders: 3 -Mileage: 154,729 km -HU/AU valid until: June 2025 -Tires: Winter and summer tires on aluminum rims -Equipment list: see pictures (with codes) -Auxiliary heating, blind spot monitoring, parking pilot, Garmin MAP PILOT, off-road package, cruise control, suspension for greater ground clearance, air conditioning, automatic high beam, heated seats, automatic tailgate, remote control for auxiliary heating... Lhodpfx Aewh Rz Uoaajp

Condition: used, Year of construction: 2021, operating hours: 3,557 h, functionality: fully functional, Technical data With FANUC 0i-MF control - Table dimensions: 850 x 400 mm - Max. table load: 250 kg - Table height from the floor: 850 mm - Travel paths: - X-axis: 710 mm - Y-axis: 400 mm - Z-axis: 350 mm Spindles, tools and axes - Spindle speed: 12,000 min⁻¹ - Spindle cone: BBT 30 Lhjdpfx Aaovzaw Teaep - Max. number of tool positions: 20 - Rapid traverse (X, Y, Z): 60 m/min - Tool dimensions: - Max. tool diameter: Ø 68 mm - Max. tool length: 200 mm - Max. tool weight: 3.0 kg - Tool change time: 0.9 sec Drive power - Main spindle: 13 kW - Coolant pump: 3.7 kW Machine data - Dimensions: 2,100 x 2,600 mm - Machine height: 2,700 mm - Machine weight: 3,150 kg Control - Type: FANUC 0i-MF with 8.4" LCD color monitor Automatic door The machine is equipped with an automatic door that makes it easier to open and close the machine. This ensures greater user-friendliness and safety during operation. The machine is equipped with a Keyarrow chip conveyor that ensures the efficient transport of chips and makes cleaning easier. First commissioning: 03.2021  Disclaimer Disclaimer: All technical data and information have been provided to the best of our knowledge and belief. We accept no liability for any errors or mistakes. Please check the information carefully and do not hesitate to ask questions if you have any questions.

Condition: used, Year of construction: 2013, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 2013 Control : Siemens 840 Dsl Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2013 Control system:Siemens 840 Dsl Turning length:1,185 Swing diameter:540 mm Bar capacity:75 Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush Lhedexl Nfqspfx Aaajp Sub spindle: Technology:Direct drive spindle Speed:5,000 rpm Max. power:32 kW Max. torque:360 Nm Chuck:SMW KNCS -N 260-78 C-axis:0.001° Flush:Chuck flush + flush through spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on traveling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:Capto C6 X-axis:450 mm Y-axis:200 mm Z-axis:1,200 mm B-axis:+/- 110° Position sensors:Direct scales (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Automation: Technology:Portal loader with stacking magazine Workpiece diameter:50 - 200 mm Max. workpiece height:230 mm Max. workpiece weight:15 kg Number of stacking attachments:20 Max. load capacity per stacking attachment:40 kg Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant system, 80 bar Tool magazine:Chain magazine, 120 stations Workpiece measurement:Renishaw touch probe Tool breakage monitoring:Swivel wire Automation:Portal loader with stacking magazine Emulsion mist separator:Mechanical Setup operation:Electronic handwheel Workspace door:Automatic Chuck:2x SMW KNCS 260 Tool holders:Various Capto C6 holders

Condition: new, mileage: 10 km, power: 140 kW (190.35 HP), fuel type: diesel, number of seats: 31, gearing type: automatic, color: silver, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), Mercedes Benz Sprinter 519 31 seats Mercus has over 15 years of expirence in bus manufacturing, it`s the biggest producer in Poland. We offer a wide range of ready to go vehicles, over 100 new buses in our car park. All needed documentation to register our bus in your country. Equipment: - MERCUS seats, fully adjustable with armrests - Double glazing, panoramic - Touristic luggage racks with individual service sets Lhedpfxjxx Hias Aaaep - Roof A/C, power 12.5kW - Front A/C for driver, power 4.5kW - Parking heating - Multimedia: monitor 17"/radio/navi/dvd/cd/mp3/microphone - Rear camera - USB sockets (charging) - Lowered entrance and electric door opening - Chrome package - Trailer hook TAX FOR EXPORT 0% Contact: , Marcin Opon (English, Polish, Russian)

Condition: used, Year of construction: 2014, operating hours: 560 h, functionality: fully functional, machine/vehicle number: 638552, overall weight: 1,092 kg, load capacity: 90 kg, arm reach: 3,096 mm, This is a KUKA KR 90 R3100 extra industrial robot Year of manufacture 2014 We are also happy to offer you this robot refurbished! Lhjdporywz Hefx Aaaep The robot includes the following options: DiagnosticsSafety EthernetKRL KRC4 Interbus Kuka.CPC LineBuilder LMConfiguration LoadDataDetermination ProConOS 4-1 Profinet KRC-Nexxt Q-Tool SafeRangeMonitoring SynchroMove VKRC4 LaserPFO

Condition: used, Year of construction: 2004, operating hours: 168 h, functionality: unexamined, machine/vehicle number: MA 3004, working width: 920 mm, stack height: 80 mm, product height (max.): 80 mm, control cabinet width: 400 mm, control cabinet length: 100 mm, control cabinet height: 150 mm, motor model: Nordson 3400 V, WRAPMATIC MA 3004 semi- automatic ream wrapping line includes logic programs, cable cabins, Siemens operating panel, frequency transformers, sensors, light shells, security lines, Nordson electrical motors, gearbox, transformers, AC source, ream counters, I/O-cards, main lines pressure monitoring switch, roller conveyors, belts, carousel, hot melt pot + hoses, pneumatic cylinders and lot of mechanical details. Capacity 10 – 14 reams per minute, depends on material. With inverter can be get more speed. The machine operated for around two weeks only as trial. Located in Alexandria, Egypt. Lsdoxr T Ezspfx Aaaohp Max sheet size : 920 x 1300 mm Min sheet size : 430 x 530 mm Ream thickness (max): 80 mm Ream thickness (min): 25 mm

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Poly-Clip FCA 100 – Automatic Double Clipper Brand: Poly-Clip Model: FCA 100 Year of production: 2019 Dimensions: 1500–1620 mm (width), 1135 mm (depth), 1985–2130 mm (height) Weight: 550 kg Lhjdpfxjxyrg Te Aaajp For caliber range 24–90 mm with speeds up to 186 cycles per minute in continuous mode The Poly-Clip FCA 100 is an advanced industrial machine designed for clipping. Featuring robust construction and high performance, it is ideal for applications in the food industry and other sectors requiring precision. It delivers fast and efficient clipping. The machine is equipped with a modern control panel, allowing for easy operation and process monitoring. Additionally, the FCA 100 offers adjustable operating parameters, making it extremely versatile and efficient.

Condition: used, Year of construction: 1990, No. 04502 Veneer press Ott JU 2511/70 Used, year of construction 1990 Electro-hydraulic, approx. 15 kW Aluminum heating plates 2550 x 1100 mm LW Heating electric 4 hydraulic cylinders each 80 mm diameter Total pressing pressure 70 tons Specific pressing pressure 2.5 - 3.5 kg/cm2 Opening width 400 mm Button control for opening - closing - stop Pressure monitoring with automatic readjustment Adjustable limit switch for specific opening width HAWE pump Safety rip cord Incl. electric cable and plug 32 A Incl. electric plans, operating instructions as .pdf file Transport dimensions approx. 2900 x 1400 x 2000 mm LWH Lhodpjxwp S Iofx Aaajp Weight approx. 3000 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Lodpfxjrg Hh Ns Aaaehp Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Schuko 10A plug socket Schuko 10A plug socket

Condition: new, mileage: 10 km, power: 140 kW (190.35 HP), fuel type: diesel, number of seats: 24, gearing type: automatic, color: white, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), Mercedes Benz Sprinter 519 24 seats Lhodexx Higspfx Aaaop Mercus has over 15 years of expirence in bus manufacturing, it`s the biggest producer in Poland. We offer a wide range of ready to go vehicles, over 100 new buses in our car park. All needed documentation to register our bus in your country. Equipment: - MERCUS seats, fully adjustable with armrests - Double glazing, panoramic - Touristic luggage racks with individual service sets - Roof A/C, power 12.5kW - Front A/C for driver, power 4.5kW - Parking heating - Multimedia: monitor 17"/radio/navi/dvd/cd/mp3/microphone - Rear camera - USB sockets (charging) - Lowered entrance and electric door opening - Chrome package - Trailer hook TAX FOR EXPORT 0% Contact: , Marcin Opon (English, Polish, Russian)

Condition: used, mileage: 1,18,800 km, power: 368 kW (500.34 HP), first registration: 11/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 11/2026, color: black, gearing type: automatic, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FORD F-MAX 500 with absolutely full equipment First registered 11/2022 Mileage 118,850 km Lsdpfxeu N Ttuo Aaajhp Mega-Cab ComfortPlus (CPP), Luxury Pack LUX, cab air suspension, 2 beds, comfort driver's seat, comfort passenger seat, storage compartments on the rear wall above the second bed, automatic climate control, multifunction leather steering wheel, LED dipped beam, winter package with electrically heated windshield, light & rain sensor, TRUCK navigation, STABO CB radio, dashboard storage table, deep sun visor with 2x LED high beam headlights, 2x LED rotating beacons, illuminated roof light box ZF automated manual transmission TRAXON 12-speed 2x aluminum diesel tank 600 liters + 450 liters Tires: Front axle 385/55 R 22.5 Rear axle 315/70 R 22.5 Fifth wheel height approx. 1,150 mm Full safety package with ABS, SEP, ASR, lane keeping assistant, emergency brake assistant, distance cruise control ACC, tire temperature monitoring, tire air pressure monitoring RENTING is the new BUYING, also available immediately from us in full-service rental-----

Condition: used, Year of construction: 2007, operating hours: 40,933 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 8,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 280 C Operating hours: 40.933h Year of construction: 2007 Control unit: Siemens 840D PL Spindle: 8.000 rpm (43 kW/ 822 Nm) Tool clamping system: HSK 100 Lhedpfx Ajxwpmxeaasp Tool magazine / places (Options): Rack / 234 (Operating panel at the tool loading station with terminal) Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 100 / 1000 / 1000 Pallet size (mm): 630 X 630 Workpiece clamping: mechanical Additonal options: Receiver for measuring probe (RENISHAW); interface exhaust system; additional weight for pallets; drill fracture sensing; status lamp; interface exhaust system; integrated tool and collision monitoring; toolshaft cleaning; tool codechip; Interface handheld;

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Ledpfsxwaz Hjx Aaaehp

Condition: good (used), mileage: 4,11,570 km, power: 346 kW (470.43 HP), first registration: 10/2021, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 6x2, wheelbase: 3,950 mm, fuel: diesel, brakes: retarder, color: red, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel-air, total length: 6,600 mm, total width: 2,550 mm, total height: 3,630 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, retarder, traction control, = Additional Options and Equipment = - Second diesel tank - Digital tachograph - Electric mirrors - Tachograph (monitoring device) - High-roof cab - Sliding fifth wheel - Auxiliary brake system = Remarks = Number of axles: 3, Configuration: 6x2, Total tank capacity: 550 liters, second diesel tank, fifth wheel height: 121 cm, fifth wheel type: sliding, number of axle locks: 1, suspension type: air suspension, cab type: high-roof, cruise control, tachograph (monitoring device), digital tachograph, air conditioning, stationary heater, electric windows, electric mirrors, radio/cassette, color: red, heated mirrors, lighting type: halogen lamp, lane departure warning system, climate control, heated seats, Bluetooth, engine power: 346 kW (464 hp), fuel: diesel, Euro: 6, transmission type: AS-Tronic, transmission brand: ZF, gears: 12, auxiliary brake system, retarder brand: Intarder, power steering, ABS, ASR, starter battery, central locking, seat configuration: 1+1, seat upholstery: fabric, manual seat adjustment = Further Information = Transmission Transmission: ZF, 12 gears, automatic Axle configuration Tire size: 315/70R22.5 Brakes: disc brakes Axle 1: steering; left tire tread: 5 mm; right tire tread: 12 mm; suspension: leaf spring Axle 2: lift axle; left tire tread: 10 mm; right tire tread: 10 mm; suspension: air suspension Axle 3: twin tires; left inner tread: 14 mm; left outer tread: 13 mm; right inner tread: 14 mm; right outer tread: 14 mm; suspension: air suspension Condition Technical condition: good Visual condition: good Damages: none Number of keys: 2 Financial Information Lease price: €655 per month (default, 60 months); ask for more information and conditions Identification Registration number: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range covers all European makes, years, and price classes. Why buy at Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • Competitive prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transportation • (Export) license plates can be arranged quickly • Expert technical services • Security of 'recognizable quality' • And much more.... Please visit our website for special offers and the complete stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ledjxxhr Nopfx Aaashp Ask directly about our European warranty package.

Year of construction: 2018, condition: used, controller manufacturer: SIEMENS, controller model: 15 13F-1 PN, CONTROLS .. SIEMENS 15 13F-1 PN 1. General Description The draw-oil preparation system is designed for the optimal treatment of un-drawn tubes prior to the drawing process. A large-volume draw-oil bath ensures homogeneous wetting of the tube surface, providing uniform lubrication, reducing friction during drawing, improving the tube surface quality, and increasing tool lifetime. A constant material flow as well as stable bath temperature and bath quality make this system a critical process step in efficient tube production. _____ 2. Performance Data & Capacities • Tube diameter range: 18–75 mm • Bundle weight: maximum 5 t • Maximum tube length: 9 m • Bath volume: 20 m³ • Electrical supply: 400 V / 180 A / 50 Hz • Operation mode: Semi-automatic _____ 3. Functional Principle Immersion Bath & Medium Conditioning • Uniform lubrication through full immersion in the draw-oil bath • Tubes integrated in the tank walls serve for oil heating via the furnace heat-recovery system • Oil circulation: Chemetall process, 12 cycles per hour • Prevention of water pockets: Precise water dosing; compressed-air injection if required • Bath composition control: Regular sampling • Dosing station: Automatic adjustment of oil and water additives _____ 4. Measurement & Control Parameters The following process parameters can be monitored and controlled: • Immersion time • Drip-off time & park time at all 3 drip stations • Crane inclination during immersion • X and Y axis positions • Crane speeds • Cycle types: Mix, Activate/Deactivate, Automatic, Pause, Cycle, Cycle interruption _____ 5. Control System & Safety • Siemens PLC: CPU 1513F-1 PN • Software: TIA Portal V15.1 Lhodpfx Aexwkytjaaep • HMI: Siemens TP1200 Comfort Panel • Safety concept: Complete risk assessment available • Includes control cabinet, electrical documentation and software backup _____ 6. Automatic Overhead Crane • Type: Matr. 2981 t.6.5 • Travel speed: up to 40 m/min • Class: A6 (FEM 1.001 – ISO) • Wheels: 4 pieces, Ø 315 mm • Track gauge: 13,000 mm • Weight: 8,000 kg • Motor: FC90LFECCL-4, 1.5 kW, IP55 • Brake: Disc brake, DC 400 V • Gearbox: TP 315/90BR, ratio 1/35 _____ 7. Components Included in the System • Loading cart • Immersion tank • Medium circulation pump • Portal crane / automatic overhead crane • Drip-off station • Unloading cart • Extraction system • Dosing unit • Control cabinet & operator panel _____ 8. Documentation • Operating manual • User manual • Electrical & control diagrams • Declaration of conformity • Software backup

Condition: new, mileage: 10 km, power: 120 kW (163.15 HP), fuel type: diesel, number of seats: 21, gearing type: automatic, color: silver, brakes: retarder, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, MAN TGE 5.160 21+3 seats Mercus has over 15 years of expirence in bus manufacturing, it`s the biggest producer in Poland. We offer a wide range of ready to go vehicles, over 100 new buses in our car park. All needed documentation to register our bus in your country. Equipment: - MERCUS seats, fully adjustable with armrests Lhsdpfx Asxxxnboaaep - Double glazing, panoramic - Touristic luggage racks with individual service sets - Roof A/C, power 12.5kW - Front A/C for driver, power 4.5kW - Parking heating - Multimedia: monitor 17"/radio/navi/dvd/cd/mp3/microphone - Rear camera - USB sockets (charging) - Lowered entrance and electric door opening - Chrome package - Trailer hook TAX FOR EXPORT 0% Contact: , Marcin Opon (English, Polish, Russian)

Condition: used, mileage: 2,21,500 km, power: 368 kW (500.34 HP), first registration: 08/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2022, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, FORD F-MAX 500 CPP Low-Liner in absolute full specification First registration 08/2022, German registration, one owner Mileage: 221,500 km Mega-Cab ComfortPlus (CPP), Luxury Pack LUX, air-sprung cab, 1 bunk, comfort driver's seat, comfort passenger seat, overhead storage compartments on rear wall, automatic climate control, stationary air conditioning, multifunction leather steering wheel, LED low beam headlights, winter package with electrically heated windscreen, light and rain sensor, truck navigation, STABO CB radio, dashboard storage table, deep sun visor with 2x LED high-beam headlights, 2x LED beacons, illuminated roof lamp box ZF automated transmission TRAXON 12-speed ZF RETARDER Lhedpfoxcrq Rox Aaajp Aluminium diesel tank 510 and 410 liters Tires: Front axle 355/50 R 22.5 Rear axle 295/60 R 22.5 Fifth wheel height approx. 980 mm and 1,180 mm (pneumatically adjustable lift fifth wheel) NATO power socket Full safety package with ABS, SEP, ASR, lane departure warning, emergency braking assist, adaptive cruise control ACC, tire temperature monitoring, tire pressure monitoring RENTING is the new BUYING, available immediately from us with full-service rental!

Condition: used, Year of construction: 2008, operating hours: 61,112 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller manufacturer: Siemens, controller model: 840D PL, table width: 630 mm, table length: 630 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, Machine name / type: HELLER / MCH 250 with RSP Operating hours: 61112 Year of construction: 2008 Control unit: Siemens 840D PL Spindle: 6.000 rpm Tool clamping system: HSK 100 Tool magazine / places: Rack / 234 Rotary table: 360.000° X 0,001° Coolant unit: KNOLL, VRF 250, IKZ 70 bar, (work area flushing) Positioning range XYZ (mm): 800 / 800 / 800 Pallet size (mm): 630 X 630 Lhedpfx Aasxwpi Teajp Workpiece clamping: mechanical Additonal options: Fast drill fracture sensing (SBBK); interface exhaust system; screen blow-off device for operator door; alternative strategy; Integrated process monitoring (IPM) and collision monitoring; 3 colour status lamp; RSP 4-fach; tool cleaning; MCIS TDI tool planning; Feed force display; MCIS DNC; spline-interpolation; cycle 800;

Condition: used, Hydraulic Synchronizing Press, Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Trial Press, Spotting Press Serial No. 21169 Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Upright opening (side): 650 mm Table surface: 1560 x 1010 mm Ram surface: 1560 x 1010 mm Ram stroke: 575 mm Draw cushion stroke: 300 mm Draw cushion holding force: 63 tons Draw cushion ejector force: 30 tons Lhjdpfxewva I Hs Aaaep Max. installation height: 775 mm Table height above floor: 1000 mm Guide column Ø: 140 mm Clamping pin bore in ram: 64 mm Pressing speed: 0 to 10 mm/s, stepless Return speed: 0 to 20 mm/s, stepless Main motor power: 22 kW Control pump motor power: 5.5 kW Connection: 400 Volts, 50 Hz - Table and ram with 22 mm T-slots - Two pressure cylinders with electronic precision synchronization control - Stepless electronic stroke limitation (top and bottom with digital travel measurement and position display) - Mechanical safety support device (prevents ram from dropping due to dead weight) - Single-hand and two-hand operation - Electrical tool safety via signal contact - Pressure presetting independent of stroke (via keypad, digital pressure display) - Travel measurement system right and left via rotary encoders - Electrical control: MS-DOS PC with Ageo H v2.23 control software - Operator panel with swiveling display - Stroke movement and press force adjustable via joystick - Adjacent hydraulic power unit with electrical cabinet - Hydraulic draw cushion under the press table - Draw cushion with ejector function - Continuous stroke control - Floor-level installation - Electrical oil temperature monitoring - Operating manual with circuit diagrams Space required by press (upright) L x W x H: 1800 x 1010 x 3470 mm Space required for horizontal transport L x W x H: 3500 x 1800 x 1200 mm Net weight press: 13 tons Space for hydraulic power unit L x W x H: 1000 x 800 x 3040 mm Net weight hydraulic power unit: approx. 1 ton The machine was used as a tool trial press in a toolmaking workshop. Very good condition.

Condition: new, Year of construction: 2024, Paint set: Powder coating furnace 1200 x 1500 x 1800 mm Powder coating booth 1400 x 1400 mm Complete kit for manual powder application OVEN / DRYER Ljdpfx Ashd Nrajaaehp TECHNICAL DATA: Working dimension (mm): 1200 x 1500 x 1800, • Power consumption: 20 kW. EQUIPMENT: • Trolley inside, • Outdoor trolley, • True Fan Cooking (Equal temperature throughout the furnace), • Locks for safe opening and closing. POWDER CABIN: Working dimension (mm): 1400 x 1800, Fan power: 1,5 kW, Fan capacity: 6 500 m³/h, Very quiet operation, Automatic filter cleaning. COMPLETE KIT FOR MANUAL POWDER APPLICATION The Inocart VT manual powder application kit is ideal for the even application of powders such as polyester, epoxy or acrylic, which are delivered in 20 kg cartons. * Constant and even spraying ensuring smooth and uniform painting, * A well-balanced gun that is comfortable to use, * TEC5 technology ensuring high quality of painting finish, * 3 factory settings for quick commissioning, * 99 client settings, * Inobox height adjustment for comfortable work with the control, * Strong cascade ensuring the effect of powder curling around the detail, * High transfer efficiency minimizing the painting time, * Advanced HV control for perfect coverage of hard-to-reach parts, * Powder flow rate adjustment, * Stepless electric vibrating table, * Self-locking hook for gun and pump maintenance during cleaning, * Footrest for easy carrying of the Inocart device, * Unbeatable cascade lifetime, * Monitoring of wear parts for replacement in the right time. CHOOSE BUMEX SP. Z O.O. Very high quality of the machines offered on the market. Professional advice and service. Guarantee. Warranty and post-warranty service. Full technical documentation. 100% satisfaction of our clients. All products of the brand BUMEX SP. Z O.O. have WE certificate. We offer our own transport - prices are agreed each time for a given offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, personalized configurations and dimensions! Please do not hesitate to contact us.

Condition: ready for operation (used), Year of construction: 2018, Control Unit Lodpjxwflwefx Aaashp Brand MAZATROL Additional Equipment Workpiece air blast / Air through spindle in running / High pressure coolant system (Europe) / Preparation for chip conveyor (right) Chip conveyor right hand Mayfran / Mazak monitoring system B (RMP60) / Manual pulse generator 1 (detachable) / Ethernet operation function / Signal tower (3 colors lights) This 5-axis Mazak VTC 800/30SR was manufactured in 2018 and features a robust 48-tool magazine, high-pressure coolant system, and a NC rotary table with 360,000 positions. Ideal for complex 5-axis machining with its advanced synchronization and interpolation capabilities. If you are looking to get high-quality milling capabilities consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2016, operating hours: 10,538 h, Used Tetra Pak A3 Compact Flex 300V Aseptic Carton Filling Machine + TSA21 straw applicator YOM 2007 –  Overview This used Tetra Pak A3 Compact Flex 300V aseptic carton filling machine is designed for high-efficiency packaging of liquid foods in the 200 ml Slim format. With a capacity up to 9,000 units per hour, it offers reliable performance for beverage production and industrial packaging operations seeking second-hand equipment with proven quality. Manufactured by Tetra Pak, a leading name in packaging machinery, this filler supports aseptic processing for sensitive products such as milk and juices, making it a strong choice for modern Usedbottlinglines and carton packaging applications. Engineered for advanced aseptic filling performance, the A3 Compact Flex 300V combines process control, operational safety, and consistent output. The machine has been maintained to align with contemporary standards, ensuring dependable uptime, product integrity, and efficient changeovers in demanding beverage production environments. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model/Version: A3 Compact Flex 300V Year of manufacture: 2016 Production speed: up to 9,000 units/hour Primary format: 200 ml Slim Filling technology: Aseptic carton filling Recorded operating hours: 10,538 h (approx.) TSA21 straw applicator system Product examples: Milk, juices Container type: Carton packages Advanced Automation & Control Systems The system features an integrated control panel and HMI for process monitoring, recipe handling, and production diagnostics. Automated sequences support aseptic startup, steady-state operation, and controlled shutdown. The platform incorporates safety interlocks and guarding to protect operators while enabling quick access for cleaning and routine service. Tetra Pak engineering ensures coordinated control of forming, filling, and sealing steps for stable, repeatable performance. Production Line Integration Capabilities This filler integrates seamlessly into complete beverage production and industrial packaging lines. It is suitable for upstream UHT/ESL processing and downstream case packing, conveyors, and palletizing. The 200 ml Slim format aligns with standard secondary packaging solutions, supporting efficient logistics. The machine can operate as a core element in a second hand used bottling line configured for aseptic cartons. Machine Condition & Maintenance History Condition reported as perfect, with maintenance aligning the unit to modern standards for process control, performance, and operational safety. The machine is ready for operation and suitable for immediate deployment after installation and commissioning within the buyer’s plant. Operational Performance & Versatility Lhsdsxvpfrepfx Aaaep Optimized for aseptic filling of dairy beverages and juices, this A3 Compact Flex 300V maintains product quality with controlled sterile conditions.

Condition: excellent (used), CTS Type: T-40/2000 Air-cooled temperature test chamber Technical design: Refrigeration unit: air-cooled, low-noise, fully hermetic, infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A Door: fully opening door, door hinge left, one-handed operation, lockable. Shelf: Stainless steel, support surface 970 x 980 + 500 mm Max. load per shelf 35 kg Total load with max. grid load 100 kg Test area lighting: 3x halogen lamp 20 W, 12 V Control: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoint values Error messages in plain text RS 232 interface Free switching channels for on-site test material control Temperature range: -40°C to +180°C Nominal voltage: 400V 3/N 50Hz Rated power: 10.4 kW Nominal current: 17.2 A Compressor: TFH2516Z Pipe feed-through NW 50 Control panel Window 570x710 mm Electrical connection, cable length 5m Technical performance data: Temperature tests: Temperature range -40°C to +180°C Temperature deviation ≤ ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 1.5 K/min Heat radiation: approx. 2500 W at +20°C approx. 2100 W at ± 0°C approx. 1500 W at -20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume: 2000 liters Test chamber dimensions: Height 900, width 975, depth 2200 mm External dimensions: Height 1950, width 1290, depth 3145 mm Operating data: Ljdpoup T Uqefx Aaaehp Electrical connection: 400 V +6/-10 %, 3/N, 50 Hz Rated power: 17.2 kW Protection class: IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level (according to DIN EN ISO 3744 measured at a distance of 1 m from the front) < 55 dB(A) Weight: approx. 1200 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CNC 5-Axis HMC – Horizontal Machining Center, Milling Center, Manufacturing Center Manufacturer: LICON Model: Liflex 1266 PC B1 Year of construction: 2016, Commissioned: 2017 Equipped with SIEMENS 840D SL (Solution Line) CNC path control, with 5 simultaneously controlled axes Travel paths X: 1200 mm, Y: 660 mm, Z: 650 mm A-axis as swivel bridge +/– 135° (270°) B-axis 360° continuous Axis acceleration X + Y-axis 6 m/s² Axis acceleration Z-axis 9 m/s² Lhjdst Ac Efopfx Aaaop Feed force X + Y-axis 7500 N Feed force Z-axis 10000 N Positioning tolerance (X/Y/Z) 0.008 mm A-axis swivel speed 180° rotation in 4 sec. Interference diameter on the swivel bridge max. 1400 mm Transport load on the swivel bridge max. 700 kg Tool holder HSK 63 Spindle speed max. 12,000 rpm, stepless Spindle power 37kW at 40% duty cycle Spindle torque at 40% duty cycle 85 Nm Maximum spindle torque 100 Nm Tool change time (chip-to-chip) approx. 3.7 sec. Tool diameter with adjacent slots occupied Ø 140 mm Tool diameter with adjacent slots free Ø 250 mm Maximum tool length 400 mm Maximum tool weight 20 kg Power supply 400 Volt, 50 Hz Connected load 80 kVA Compressed air connection 5-8 bar - LIFLEX MSP 80/63/85/12,000 motor spindle (output 37kW/40% duty cycle) with liquid cooling and recooling unit - 2-axis rotary tilting table LICON as B- and C-axis, with hydraulic axis clamping - Zero-point clamping system on the swivel axis turntable - Dual pallet changer, without pallets (these need to be newly sourced) - Media transfer of 5 single-action pressure lines for oil or air, for workpiece clamping on the pallets Hydraulic functions from 30-150 bar, with pressure monitoring (controllable via M-functions) - Tool changer with 30 tool positions, disc turret type - Machine designed for dry machining with minimal quantity lubrication (MQL) system - MQL-TSC, internal MQL lubrication supply through the spindle - Scraper belt chip conveyor, discharge height 1150 mm - Licon ECO-Mode (energy-efficient aggregate operation) - Direct linear measurement system on all axes - Operating hours (control voltage on) ≈ 7,500 h Space required for operation L x W x H 9,000 x 5,000 x 3,800 mm Space required for transport L x W x H 6,100 x 4,400 x 3,600 mm Base machine weight approx. 21 tons Total weight: approx. 24 tons Very good condition

Condition: ready for operation (used), Year of construction: 2017, Control Unit Brand MAZATROL Movement X-Axis Movement 615 mm Y-Axis Movement 260 mm Z-Axis Movement 1585 mm W-Axis Movement 1574 Lodpfx Aasxwflksaehp Additional Equipment Overload detection system / M-coolant (equipped) prep M-thru 7MPa / Mazak Monitoring System B (RMP600) / Mazacheck / C-axis through milling head during rotation / M-code to be switched coolant/air thru / Ethernet operation function / B) Cylindrical & Polar Coordinate (EIA) / 5-Axis Machining Package for SmoothX / Signal Tower (3 colors lights, square) / 2nd Spdl C-Ax. Sync (fact. install only) / Raw/tube connection parts til 1 & 2nd spindle / Mayfran, Consep2000 side / Mayfran, Variflow HP Pack #1 (7 variable flow/pressure stages), 7.5 K/ Mayfran, HP Twin in-line cartridge filter upgrade / Mayfran, coolant gun This 5-axis Mazak Integrex i-400S was manufactured in 2017, featuring a 1500 mm bed, 72 Capto-tool magazine, and a Mazak Monitoring System B. It includes a 5-axis machining package for SmoothX and Ethernet operation functionality. If you are looking to get high-quality turn-mill capabilities, consider the Mazak Integrex i-400S machine we have for sale. Contact us for more information. Application Types Turning