Used Monoblock for sale (262)

Condition: used, operating hours: 24,000 h, Used Bottling Line for Sale Bertolaso 7000 BPH – 1999 for still and sparkling wine. The bottling Line for Sale as a whole, considering every component, is very well maintained. Clean and without obvious or compromising signs of wear. The sparkling wine bottling line reaches an hourly speed of about 3000 BPH on the 0.75 formats. Depalletizer: The line starts with the Acmi automatic depalletizer model Rasar P130; with an electric roller pallet storage that manages the pallets automatically with two pallets waiting. The maximum height of the workable pallet can reach about 2 meters. The standard pallet size is 800 × 1200 with a height of 140 cm. Automatic inter-layer remover with compressed air rotating arm. It has a parachute safety system that prevents the head from going down in case there is an operator. It is also equipped with a perimeter barrier that blocks the machine in case the doors are opened. Filling Isobaric Monoblock of Bertolaso Bottling Line for Sale: Predpfxevguu Do Aahjc The Bertolaso ​​Sincronia 1400 filling monoblock starts with a 28-valve internal bottle rinsing machine followed by an isobaric filler with 36 taps and ends with a 6-head mushroom cork corker, or a 4-head screw cap. It has a machine pitch of about 30 cm to allow the processing of multiple formats of different sizes. The direction is clockwise. Safeguards are all present as also machine manuals. This line’s bottled product is wine and sparkling wine in sizes from 0.375 to 1.5 L.  It performs isobaric filling with mobile nozzles and traditional valves. It generates a vacuum before capping. The type of cap used is cork (straight or mushroom) or silicone with 6 heads; while aluminium and Stelvin caps with 4 heads. The size of the corker ranges from a minimum of 44 × 23.5 to 48 × 30.5 mm. Inspector: It is a 2011 model that is able to check the level and the cap, the internal product and any residues inside the empty bottle. Fully electronic with laser sensors, it can work at a speed of 7000 BPH and over. Washer-dryer: It’s a Cames from 2000 with a spray washing system that rinses the bottle externally, brushes it and then passes it under the hot air hair dryers that immediately dry the bottle preparing the surface for labelling.  Wirehooder and Capsule: Next in line is a Spumante Wirehooder of the brand Nortan Minerva 60, an accumulation space for the bottles followed by a Nortan capper. It is also suitable for sparkling wines with centring, with a maximum height of the processed bottle ranging from 15 to 35 cm. Overall mass 3000 kg; Consumption: 380 v, 15 kW, 50 Hz Labelling machine: Bertolaso Bottling Line for Sale has a Krones labeller from the year 2000 with a bottle lock at the entrance. It has 8 plates with a machine pitch of about 30 cm. It has a manual head and glue film adjustment, mechanical centring system and outgoing label smoothing.

Condition: like new (used), functionality: fully functional, overall weight: 1,925 kg, Year of construction: 2024, operating hours: 196 h, Mini excavator, make: Case CAT 301.6, as new, operating hours: 196, year of manufacture: 2024, weight: 1,925 kg, power: 16.1 kW, MS01 quick coupler incl. lifting hook, monoblock swing boom, dozer blade, DAB radio, long arm 1,160 mm, adjustable undercarriage, hydraulic circuit for hammer or tilt bucket (2-way hydraulics), LED headlights, joystick steering or standard, GPS monitoring, without bucket, with user manual – warranty valid until 07/2027 or up to 1,000 operating hours. Prsdpfx Ajw R Rhloahjc

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN 1171, workpiece weight (max.): 450 kg, working height: 870 mm, feed rate Y-axis: 45 m/min, working width: 300 mm, warranty duration: 12 months, total length: 1,900 mm, height adjustment type: mechanical, overall weight: 450 kg, total height: 1,500 mm, total width: 1,300 mm, compressed air connection: 6 bar, Equipment: documentation/manual, The APACHE 3 is a cost-effective solution suitable for both craft and industrial applications, specifically designed for coating facade claddings and their supporting substructures. It is perfectly suited—without limitation—for coating profiles with cross-sections of 300 mm x 25 mm, providing flawless surfaces in a highly efficient and cost-saving manner, requiring no special prior knowledge from the operator. This unit can also be integrated into automated systems or coating lines. It can coat boards, profiled boards, tongue-and-groove boards, rhomboid profiles, laminated timber, and structural timber, as well as decking, garden, log cabin, sauna or privacy screens. Essentially, it's ideal for any product requiring a premium-quality visible surface. Substructures (typically black) can also be coated with low-viscosity, highly pigmented stains containing wood preservatives—even without lateral brushes. The APACHE 3 distinguishes itself from standard market products by its robust monoblock steel welded frame and a coating applied using a baking process with extremely resistant Teflon (enamel). This non-stick coating ensures self-cleaning, making the machine extremely low-maintenance. The machine offered is brand new and available for demonstration in our showroom. We would be pleased to demonstrate our machines and systems either on-site or at customer locations in your vicinity. For further information and a detailed description, please visit our SARMAX website. APACHE 3 Serial number: SN 1171 Flood coating unit with three (3) brushes Working width: 300 mm Working height: 100 mm Minimum workpiece length: 100 cm Feed speed, frequency-controlled: 10–45 m/min Number of driven transport rollers: 3 Diameter of transport rollers: 80 mm Prsdjxhquxjpfx Aahsc Brush arrangement: two (2) from above, one (1) from below Diameter of brushes: 160 mm Central brush drive: 2.2 kW Compressed air blow-off left/right, fan nozzles to clear tongue-and-groove: 80 l/min Double diaphragm pump: 90 l/min Compressed air consumption: 600 l/min Connection: CEE plug 16 A 400/50/3 V/Hz/P E Total power: 4.5 kW Working height: 900 +/- 50 mm Approximate weight: 450 kg Operation: via control and indicator devices according to VDE, hydraulic ball valves Dimensions (L/W/H): 1,900 x 1,300 x 1,500 mm Standard: CE Color, design: grey 7046 RAL

Condition: excellent (used), Collective lot comprising of: - Fillber Monoblock RVOL.TVP 32-8 OMS Filler/Capping System (With Cap Changeover) With Siemens PLC Podpsxnc Epofx Aahorc - Posimat Master-15 bottle Unscrambler, SMF Dumper DRH 310 With Posimat Loading Elevator - SMIPACK XP650 ARX-VS Overlap Shrink Wrapping Machine with FLXMOD Control System - Epackaging Saturno 1T High Speed Labelling System - ASMECH BESPOKE CONVEYOR SYSTEM With Travelator & Bottle Sorting Unit

Condition: used, Year of construction: 2014, Overview  This filling and labeling monoblock was manufactured in 2014 by the Italian company Framax. The machine was last operated in July 2025 and is still installed in the brewery but not in operation. It is immediately available for sale. Full original instruction manuals for both the filler/capper and labeler are included. Technical data Capacity: Approx. 2,000 bph (330 ml bottles, manufacturer estimate); approx. 1,670 bph (500 ml bottles, actual use) Formats possible: 250 ml – 1,000 ml Formats included: 330 ml and 500 ml long neck bottles Bottle cap type: 26 mm crown caps Execution: Filler/capper: Modulblock 10/1-C Labeler: LLAC-R-SQ (VAR STEP) Additional features: Hot foil stamper (added later) CIP dummy bottles Change parts for 330 ml format Prjdoxalibjpfx Aahoc

Condition: new, Year of construction: 2025, functionality: fully functional, turning length: 450 mm, turning diameter: 550 mm, Competence Meets Precision: CNC Lathe with C-Axis Discover the TN500‑450 from the STAR TN Series by GreMaT – a CNC lathe that distinguishes itself through its robust monoblock construction and advanced technology. The Siemens 828D control system offers intuitive operation and maximum manufacturing precision, making it ideal for modern production environments. 2. Technology & Key Advantages at a Glance Integrated Motor Spindle Drive Available as a “built-in spindle” with high rotational speeds – belt-driven or direct drive – ensuring exceptional rigidity and dynamic machining performance. 12-Position BMT Power Turret High tool flexibility with a 12-position turret, C-axis, and hydraulic brake – perfect for complex milling and turning operations. Hydraulic & Servo-Programmable Tailstock Hydraulically operated as standard, optionally servo-programmable – for flexible workpiece support and advanced automation. Robust Monoblock Cast Construction Maximum stability and vibration resistance thanks to a one-piece machine bed – the foundation for long-term precision and durability. Key Technical Data (Selection) Feature Data Workpiece Length 450 mm Swing Over Bed Ø550 mm Spindle Bore Ø66 / Ø75 mm (optionally Ø86 mm) Main Spindle Power up to 30 kW, speeds up to 4000 rpm Tool Stations 12 (BMT45/BMT55) Psdpfow T Tllox Aahjrc Tailstock Stroke 100–500 mm (Hydraulic / SPT) Weight approx. 5,400 kg Dimensions (L×W×H) 2860 × 1950 × 2200 mm 3. Experience It Live at EMO 2025! See the TN500-450 in action at EMO 2025 – witness intelligent control, robust construction, and complete tooling flexibility in a live demonstration. 4. Your Advantage – Secure Your Tickets Now! 👉 Get your free EMO tickets now and schedule a personal consultation! Contact us for details! 5. Why the TN500-450? - Robust & precise: Monoblock design ensures maximum stability - Modern & automatable: Siemens 828D control + servo-programmable tailstock - Versatile & productive: 12-position turret with C-axis - Compact & efficient: Ideal for short parts with high load capacity

Condition: used, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. SIPA Blow Molder and Preform Management Pedpjvgu Tysfx Aaherc The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production.

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Psdpfx Aasw Tbgdshorc Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport

Condition: new, sheet width 3100 mm plate thickness 6,0 mm thickness at "Niro-steel" 4,0 mm distance between columns 3100 mm down holder 14 Stück no. of strokes 18 Hub/min oil volume 150 ltr. cutting angle 1,2 ° control CYBELEC CybTouch total power requirement 11,0 kW weight 6300 kg range L-W-H 4.000 x 2.100 x 1.640 mm ----- electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting Podpsxabzgofx Aahorc - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball casters in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device (monoblock)

Condition: used, Year of construction: 2023, Overview  This isobaric filling monoblock was manufactured in 2023 by the Italian company Alfatek BP Srl. The machine is a Beer Plus version with an additional 8-head deoxygenation turret before the filler, providing three pre-evacuations for improved filling performance. After the sale, it will be fully overhauled, delivered as good as new, and covered by a 12-month warranty. The machine is available immediately. Technical data  Capacity: 6,000 bph (at 33 cl) Formats: 33 cl, 50 cl, 75 cl (crown cork 26 mm and 29 mm) Execution: 24-head rinser 8-head deoxygenation turret 28-valve isobaric filler 4-head crown capper (Arol) Application: Beer and carbonated beverages (e.g. lemonade, soda) Neck finish: Crown cork 26 mm, crown cork 29 mm Condition: In excellent state, to be delivered fully overhauled and guaranteed Scope of Delivery  Complete monoblock including rinser, deoxygenation turret, isobaric filler, and crown capper Documentation available 12-month warranty after overhaul Predpew U Si Ssfx Aahjc

Condition: used, Used filling line for water for PET containers 5L 800bph Predowr T E Depfx Aahsc This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Pjdpfx Aajwa Tqcshjrc Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles CIP (Cleaning-In-Place) connections Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: used, Used bottling Line GAI for still wine up to 1600 bph Prsdpfovgu T Tex Aahoc The is line for still wine, therefore, delivers a highly reliable solution for processing bottles of various sizes. Furthermore, each component ensures precision and quality throughout all operational stages, meeting high standards for the wine industry. Filling Monoblock in the Used bottling Line GAI for still wine up to 1600 bph The GAI model 3005 TOP filling monoblock, as a result, optimizes bottle cleaning with its 12 rinsing clamps. Moreover, it removes residual oxygen using a deaeration head and ensures precise dosing with 16 filling valves. Additionally, a CO2 injection head actively creates a protective atmosphere, preventing oxidation and preserving product quality. Format Compatibility The line, in particular, supports bottles of 0.375 liters, 0.75 liters, and 1.5 liters. It also accommodates straight corks with standard dimensions of 22×38 mm, 25×38 mm, and 24×25 mm. Consequently, this versatility makes the line adaptable to various production needs. Component Connection GAI conveyors, in turn, connect the filling monoblock to the capsuling and labeling system, ensuring a continuous flow and efficient transfer of bottles through different production stages. Moreover, these conveyors allow seamless integration of the various components. Capping and Labeling Monoblock The GAI MEB 9320 monoblock, in addition, improves production with two wash-dry heads, two heat-shrinking heads, and two smoothing heads. Besides, it applies labels with two labeling stations and marks bottles with a hot stamping unit. Thus, this system delivers professional and consistent results while controlling the final processing stages. Consumption and Technical Specifications The line operates efficiently since its air consumption is tailored to each component. For instance, the heads consume 400 Newton/hour, while the bottom blowing system uses 20,000 Newton/hour, and the system runs at a pressure of 6 bar. Additionally, the installed power reaches 10.63 kW, while the monoblock weighs 1,500 kg. Capsule autonomy, in comparison, ranges between 300 and 600 units. Used bottling Line GAI for still wine up to 1600 bph condition Technicians have overhauled the entire line to ensure readiness for immediate operation. Consequently, the high-quality components and careful design make this line, without a doubt, an ideal choice for bottling still wines at a capacity of up to 1600 bottles per hour.

Condition: used, operating hours: 45,000 h, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles. Prodpfx Aasvgva Ushec  

Condition: used, operating hours: 3,000 h, Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and packaging flexibility. Furthermore, the system ensures that transitions between production batches remain smooth and efficient. Working Hours and Line Condition Psdswahdqopfx Aahorc The machines in this Used complete isobaric bottling line for CSD 6400 bph have completed only 3000 hours of operation. In comparison to similar used systems, this relatively low usage indicates limited wear on mechanical parts. Therefore, technicians can expect excellent performance with minimal maintenance needs. Moreover, this condition makes the line suitable for facilities that require immediate deployment with limited downtime. Line Composition The process begins with a Sidel SBO4 COMPACT blow molding machine, built in 2006, which forms PET bottles directly from preforms. Then, the Simonazzi-Sidel Starblend mixer, manufactured in 2007 blends water, syrup, and carbon dioxide under pressure. Afterward, the product is managed in the Simonazzi-Sidel Bluestar filling monoblock, also from 2007. This unit includes 32 grippers, 32 isobaric filling valves, and 8 capping heads. Thanks to this configuration, the line fills and caps each bottle quickly while maintaining product integrity. Additionally, the machine layout allows for optimal integration of automation and operator access. Notably, each module connects via pre-aligned interfaces, which streamline installation and minimize commissioning time. Altogether, these features contribute to high production efficiency and ease of maintenance. Quality Control and End of  this Used complete isobaric bottling line To guarantee packaging integrity, the line includes a Heuft inspection unit that checks bottle necks and caps for defects. Following inspection, the bottles pass through a Sidel RollQUATTRO F15 labeling machine (2007), which applies wrap-around labels at high speed with precision. Subsequently, a Cermex CP 18 AAE shrink wrapper (2006) packages bottles into multipacks using shrink film. Throughout the process, Sidel conveyors transfer bottles between stations without creating friction points or mechanical delays.

Condition: used, Year of construction: 2016, Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph It is extremely important to note that this machine is complementary to it’s filling monoblock: (click here). Introduction to the Used Rinsing Machine MITSUBISHI This rinsing machine serves as an advanced solution for the bottling industry. Specifically, Mitsubishi Heavy Industries Mechatronics Systems Ltd. manufactures this 2016 model RNR100H machine to ensure effective cleaning of aluminum bottles. Consequently, it addresses the critical need for efficient and reliable rinsing processes in high-demand production environments. Operational Capacity and Speed The RNR100H operates at an impressive capacity of 39,000 bottles per hour, making it ideal for high-speed production lines. Additionally, the machine handles aluminum bottles in various formats, including 0.29L, 0.3L, 0.31L, 0.4L, and 0.41L, thereby adapting to specific production needs. Moreover, the grippers rotate clockwise, which optimizes workflow and significantly enhances the rinsing process’s efficiency. As a result, manufacturers can achieve higher throughput without compromising on quality. Gripper System and Double Treatment Furthermore, the  Rinsing Machine MITSUBISHI  features 100 grippers, allowing it to treat numerous bottles simultaneously. This double treatment system involves two distinct phases: firstly, the machine uses water containing hypochlorous acid for effective disinfection. Subsequently, the second phase employs pure water to ensure the complete removal of chemical residues. Therefore, this dual-step approach guarantees thorough cleaning and minimizes the risk of contamination. Compatibility with Filling Machines A crucial technical aspect of the RNR100H lies in its compatibility with various filling machines. Specifically, the filling machines must have a corresponding height between 120 and 200 mm and a diameter between 50 and 80 mm. These parameters ensure optimal integration with existing production lines, thereby reducing adaptation times and enhancing operational continuity. Consequently, manufacturers can seamlessly incorporate the rinsing machine into their workflow without significant downtime. Mechanical Structure and Maintenance Moreover, the mechanical structure of the Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph guarantees durability and reliability. The machine’s components, made from high-quality materials, resist corrosion and wear, ensuring a long operational life even in intensive production environments. Additionally, the modular design facilitates preventive maintenance, allowing for the rapid replacement of worn parts. As a result, downtime is minimized, and maintenance costs are effectively controlled. Energy Efficiency Used Rinsing Machine MITSUBISHI for aluminum bottles up to 39000 bph From an energy perspective, the RNR100H optimizes energy usage to reduce consumption without compromising performance. Prjdpovgvhxjfx Aahoc

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Performance Output by Bottle Format Prsdpfowgw Dgox Aahoc Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: used, operating hours: 30,000 h, Used CFT can filling line for soft drinks – 12,000 cans per hour Introduction and Production Capacity The Used CFT can filling line for soft drinks – 12,000 cans per hour delivers a complete solution for filling carbonated beverages in aluminum cans. CFT designed the line in 2017 and configured it to handle two Slim formats, which are commonly used in the soft drink industry. Specifically, the system processes up to 12,000 cans per hour, meeting the output requirements of medium-scale industrial facilities. As of 30/06/2025, the owner will release the line for sale. Therefore, this represents a valuable opportunity for facilities seeking to expand their production capacity. Depalletizing and Initial Inspection Pjdpfswr T Ewox Aahorc Initially, the CFT depalletizer automatically separates empty cans and feeds them into the production flow. Then, a HEUFT inspection unit checks each container for visual defects and dimensional non-conformities. As a result, the system ensures that only clean, undamaged cans move forward for rinsing. In addition, this early inspection step reduces the risk of line stoppages later in the process. Can Conveyance and Rinsing Next, CFT cable conveyors transport the accepted cans to a dual-channel rinser. The CFT rinser cleans the interior of each can using pressurized water jets or sterile air. Consequently, the machine maintains hygiene standards in line with food and beverage regulations. Moreover, the dual-channel configuration improves throughput while reducing contamination risks. Notably, this section plays a key role in maintaining microbiological safety. Filling After rinsing, a CFT monoblock handles the filling and seaming stages with 12 filling valves and 4 seaming heads. The machine processes cans of 150 ml and 330 ml efficiently. It also controls pressure and temperature precisely to prevent CO₂ loss during the filling of carbonated soft drinks. Furthermore, this phase supports both performance and product integrity. In effect, it ensures consistent quality in high-speed conditions. Full Can Inspection and Rejection Following the filling stage, another HEUFT unit inspects the filled cans to verify fill levels, seal integrity, and the absence of leaks. When it detects non-compliant cans, an automated HEUFT rejection module removes them from the line. As such, this step protects the quality of downstream operations. Additionally, it avoids the unnecessary packaging of defective units. Overall, the system minimizes waste and downtime. Conveyance and Packaging Subsequently, CFT conveyors move the approved cans to an SMI shrink wrap packer. The packer forms bundles in several formats: 4×3 (12 cans), 6×4 (24 cans), and 2x2x3 (12 cans). In this way, the flexible configuration supports various packaging and distribution strategies. Besides improving logistics, this packaging versatility allows rapid changeovers between product sizes.

Condition: used, Used Filling Line for Sparkling Wine PROCOMAC Up to 6000 BPH Condition and Capacity Firstly, the filling line reaches up to 6000 bottles per hour (BPH), standing as an efficient solution for companies aiming to optimize their bottling processes. Currently stored, moreover, this line offers versatility in handling different glass container formats, specifically 0.375 L, 0.75 L, and 1.5 L, for both sparkling and still wines. Additionally, the isobaric filling technology ensures product integrity throughout the process. Key Components of the Used filling line for sparkling wine PROCOMAC up to 9000 bph The system comprises several key machines. Initially, the TMG depalletizer, model VEGA 60 from 2004, handles empty bottles. Following this, the Procomac filling monoblock, model 56 8 8 141 from 2004, integrates filling stages into a compact solution. Furthermore, the Bertolaso capping machine, model EMN 550/350 from 1995, ensures each bottle is sealed correctly. Cleaning and Maintenance Essential for maintaining quality and hygiene, moreover, the Procomac CIP (Cleaning-In-Place) system, model 92.003.657 from 2004, allows for effective and automated cleaning of the equipment without disassembly. This aspect is crucial to ensure the longevity and efficiency of the filling line. Prsdpfsvgt I Aox Aahsc Automation and Labeling Moreover, automation plays a key role in the line’s efficiency. Conveyors move bottles from the depalletizer to the exit of the triblock, highlighting the importance of uninterrupted workflow. Subsequently, the Kosme labeling machine, model EXTRA ADHESIVE 720 12T S3 E3 CE from 2006, applies labels accurately, ensuring a consistent and professional brand image on the final product. Packaging Final packaging is managed by TMG machinery: the ORION case erector from 2008 prepares cardboard cases, while the TM90S case sealer from 2004 closes and seals the cases, ready for distribution. These final steps are vital to ensure that the finished product is presented and protected adequately for transport. Performance of the Used filling line for sparkling wine PROCOMAC up to 9000 bph Lastly, the line displays versatility in performance, with a nominal speed of 6,000 BPH for sparkling wine in the 0.75 L format and 9,000 BPH for still wine in the same format. This flexibility demonstrates the adaptability of the used PROCOMAC sparkling wine filling line to different production needs, making it a valuable solution for any winery.

Condition: used, Used Bottling Line for ESL MILK up to 2500 bph We present a used bottling line engineered for maximum efficiency and reliability in packaging ESL milk. Furthermore, this line is optimized to ensure continuous and high-quality production, with a nominal capacity of 2500 bottles per hour (bph). Nominal Capacity and Configuration of the Bottling Line for ESL Milk The nominal capacity of 2500 bph arises from a precise arrangement of the main components. Firstly, the line includes 12 filling heads and 1 capping head, ensuring a smooth and uniform flow during the bottling process. Moreover, it handles round PET bottles with a standard format of 1000 ml. Product and Packaging Specifications This line is designed for round PET bottles, with a standard format of 1000 ml. It accommodates both pasteurized and ESL pasteurized milk, ensuring maximum versatility in production. Power Feeding and Distribution Features The line requires an electrical supply of 400 Volts at 50 Hz and is configured for a three-phase distribution system with separate neutral and ground. Additionally, it requires a minimum pressure of 7 bar for the low-pressure compressed air system. Filling Environment and Blow Molding The filling process occurs in an ultra-clean environment at a temperature of 4°C, ensuring maximum product quality and freshness. Moreover, the used blow molder, a Kosme KSB 4 L model, optimizes PET bottles of various sizes, with a production speed of up to 6800 bottles per hour. Energy and Water Consumption The line is designed for optimized energy and water consumption. It consumes an average of 36 kW of electricity, with an installed power of 56 kW. Additionally, it necessitates a cooling water flow of 6.6m3/h at a temperature of 5-7°C. Performance and Efficiency The line achieves a maximum output of 1700 bottles per hour per mold unit, thanks to pneumatic preform separation and precise servo motor controls. Moreover, it features short deaeration times, ensuring optimal use of blow molding time. Additional Components In addition to the blow molder and filling line, we specifically include the AVE mod. 12/12/1 MLK automatic monoblock for packaging fresh milk in 1000 ml PET bottles, complete with rinsing, filling, and capping systems. Furthermore, a SIMAC 2500BPH labeler and Mariani FS-T10 automatic shrink wrapper provide a comprehensive and automated packaging solution. Pjdpfovgvr Rex Aaherc Optional upgrade of the ESL Monoblock If needed the Monoblock present in the Used Bottling line for ESL milk can be complemented by some elements to enhance its functionality. An H2O2 an H2O2 hydrogen peroxide injection system can be installed to sanitize the bottles. An inlet screw would allow 1 ml of H2O2 to be nebulized, while a UV lamp on the capper would ensure the sterilization of the caps. A compressed air microfiltration system and a pressurized environment with HEPA filters would ensure a sterile environment.

Condition: used, Krones 48,000-bottle-per-hour (BPH) complete bottling line for non-carbonated products is designed for PET containers with sizes of 0.38 L and 0.55 L, using volumetric filling and 30/25 type necks. The line includes several key components, including a 2015 Krones Contiform blow molding machine with 22 cavities, a 2015 Krones Contifeed preform conveyor, and a 2015 Krones Contiform 50-20 filling monoblock. The system also includes 2021 Hawkeye Smart C-3000 and 2020 Krones Linadry air dryers, 2021 Krones labeling machines, and several other machines for inspection, packaging, shrink wrapping, and palletizing. Psdpfevlwpusx Aahorc This used bottling line is ready to use and monitors the operational status of each machine monthly to ensure maximum efficiency and reliability. Krones Contiform 2015 blow molding machine with 22 cavities of Used Complete Bottling Line Krones for Still products 48000 bph The Krones Contiform 2015 blow molding machine with 22 cavities of this krones line is designed for high-speed production of PET containers, with an output capacity of up to 48,000 bottles per hour. The Contiform uses an optimized linear infrared heating module for preforms up to 160 mm in length and 48.5 mm in support ledge diameter. This model features advanced blow molding technology, enabling production of up to 2,750 containers per cavity per hour, while reducing compressed air consumption by 15% compared to previous models. The intelligent control system of the Contiform ensures consistent bottle quality through various optional modules, such as the Prejet preform internal cleaning system and the PET-View inspection system for integrated quality control of preforms and containers. The machine includes a blowing module with an advanced mold clamping mechanism, eliminating the need for a pressure pad and allowing the production of bottles up to 2.0 liters in volume on a reduced-size blowing module, occupying 22% less space than previous models. The active transfer system with five-point heating mandrels in the linear oven and reduced number of internal horizontal transfer points for preforms and containers improve operational efficiency. The high-precision Monotec servo motors with real-time synchronization ensure precise and reliable handling of preforms throughout the blow molding process. Krones Contifeed 2015 preform conveyor The Krones Contifeed 2015 preform conveyor is designed to ensure continuous and consistent feeding of preforms to the blow molding machine. The Contifeed system supports various types of preforms, including lightweight, standard, and heavy, and is available in three models suited to the respective blow molder capacity. The feed rail variants include a gravity system for common preforms and an air-assisted system, ideal for lightweight preforms and high-speed applications. The Contifeed features automatic adjustment for quick format changes, hygienic design, and a soft-tilting preform tipper for gentle preform feeding.

Condition: used, Used Wine Filling Line 2000 Complete line for still wine filling, consisting of the following machines: Used Depalletizer Automatic depalletizer branded Oma model Depalblock 2000 built in 2002. It reaches speeds of 6000 BPH for the 0.75 lt format. In addition to that it works formats such as bottles of 0.375 – 0.75 and 1.50. This used depalletizer is supplied with all its accident prevention protections and also the user manuals. The loading is carried out from above and there is neither an interlayer removal system nor a pallet magazine. Instead, there are spare parts available. Measurements: Length: 2950 mm Width: 2133 mm Height: 2530 mm Weight: 1550 kg. Volt consumption: 380 Kw: 2 Hz: 50 Used Filling Monoblock of this Used Wine Filling Line The manufacturer of this monoblock is Ave Impianti, and it is an Oceanic 16-16-4 model. It works with the same formats from 0.375 – 0.750 – 1.500 at a speed of 3800 BPH. The direction of rotation is clockwise, and the state is currently in production. This machine is currently used for filling still wine. This machine includes also a rinsing machine that has 16 forceps and does 2 treatments. Then follows the 16-valve filler with a fixed nozzle. Finally, there is the 4-head cork stopper that can process a diameter of up to 26 mm. There are several spare parts for this machine. Measurements: Length: 4600mm Width: 2300mm Height: 3400mm Consumption Volt: 380 Hz: 50 Used Capper The used Capper is Bertolaso branded and the model is Alfa 110 Inox from 1995 with 1 head. Psdjvguttopfx Aahsrc Clockwise rotation direction, is always complete with all available manual and accident prevention protections. The operational status is currently in production and the type of container handled is 0.75 liter Bordolese. The cap type is Stelvin and the size is 30×60, while the neck type is standard. Measurements: Length: 800mm Width: 900mm Height: 2600mm Volt consumption: 380 Used Capsuler This machine is branded Robino and Galandrino model Fenix 2 of the year 2000. It is a used capsuler with 2 heads and the speed reached is 6000 BPH with the following formats: 0.375 – 0.750 – 1.500. There are safety protections and manuals are also available with the necessary instructions. The state is currently in production. The specific product treated is still wine. The types of capsules used are the Enoterms in Polylaminate. Weight: approx. 1800 kg Consumption Volt: 380 Kw: 4.5 Hz: 50 Used Labeling Machine of this Used Wine Filling Line Branded Kosme Model Extra Fix 8T S3 E3 + S2 E2 Adhesives year 2005. Speed of 3000 BPH on the treated formats of 0.375 – 0.750 – 1.500 L. Machine currently in production in the line with its accident prevention protections and user manuals available.

Condition: used, operating hours: 52,428 h, Used Bottling Line for Sparkling Beverages up to 9000 bph The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages Podjvgvbrspfx Aaherc The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. Using isobaric technology, the line effectively preserves effervescence throughout filling, which, in turn, maintains product integrity and enhances taste quality. Blow Molding Machine – SMI EBS 2016 The SMI EBS blow molding machine, model EBS from 2016, forms PET containers directly on-site. Specifically, it transforms preforms into bottles, ensuring consistent size and container strength. Therefore, this integrated blow molding machine increases efficiency by minimizing reliance on external bottle supplies and maintaining high-quality production standards for the CFT Bottling Line For sparkling beverages. Filling Monoblock – CFT Master EW 32/32/8 2012 The CFT Master EW 32/32/8 filling monoblock, a central component of the used bottling line for sparkling beverages up to 9000 bph, combines rinsing, filling, and capping in one compact unit. Notably, this system uses isobaric filling to keep internal container pressure stable, which is especially beneficial for carbonated beverages. In this way, the setup reduces waste and effectively protects the product’s quality. Labeling Machine – P.E. Labellers Universal M/S 15T/960/3S – 4E 2009 The P.E. Labellers labeling machine, model Universal M/S 15T/960/3S – 4E from 2009, applies labels to PET containers with precision. Label application helps with product identification, in addition to ensuring regulatory compliance. Furthermore, this model offers flexibility and accuracy, especially for containers of various shapes and sizes for the CFT Bottling Line For sparkling beverages Sleevering Machine – Nortan NORTAN 50 2008 The Nortan NORTAN 50 sleevering machine from 2008 of the CFT Bottling Line For sparkling beverages adds protective sleeves to containers, enhancing aesthetics and protecting them from contamination. In addition, this process proves essential for beverages stored or transported over long periods. Thus, the used bottling line for sparkling beverages up to 9000 bph benefits from this feature by improving product durability on store shelves.

Condition: used, Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Introduction ot the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH The Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH  processes 0.75-liter glass bottles with high efficiency. Since this line handles sparkling wines, spumante, and still wines, it integrates specialized machinery that delivers precision, quality, and reliability. Consequently, it streamlines operations from bottle preparation to final palletizing, ensuring seamless production. Components of the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH Bortolin Kemo DEPALTERM SP/02/V Depalletizer (2014) Psdovgvmhepfx Aahsrc In the Used Isobaric Bottling Line for Sparkling Wine, the Bortolin Kemo DEPALTERM SP/02/V, built in 2014, automates the handling and sorting of glass bottle pallets. Notably, its AISI 304 stainless steel structure resists corrosion and meets strict hygiene requirements in production environments. The depalletizer uses robotic grippers to lift entire bottle layers from pallets. Meanwhile, high-resolution optical sensors monitor the container positions, synchronizing the gripping cycle with the rest of the line. CIP Procomac UNIFLUX 2000 in the Used Isobaric Bottling Line for Sparkling Wine Capacity 9000 BPH The Procomac UNIFLUX 2000 CIP system performs in-situ cleaning and sanitization of the bottling line equipment. To enhance efficiency, the system includes AISI 316L stainless steel tanks with electropolished surfaces that resist chemical detergents and sanitizing solutions. Moreover, its variable flow rate reaches 15 m³/h, ensuring efficient circulation of cleaning solutions. In the Used Isobaric Bottling Line 9000 bph the CIP system executes sequential cleaning cycles. First, it starts with a pre-rinse using demineralized water to remove large residues. Then, it washes the equipment with alkaline detergents, dissolving organic residues. Afterward, an intermediate rinse eliminates detergents before the system performs final sanitization with acidic or sterilizing solutions. Procomac 32.56.8.8 Filling Monoblock (2000) The Procomac 32.56.8.8 filling monoblock, built in 2000, serves as the core of this bottling line. It efficiently fills sparkling wines, frizzante, and still wines while maintaining product integrity. Consequently, it ensures high performance throughout the entire production process. The rinsing unit features 32 rotary nozzles that thoroughly clean bottles before filling. Furthermore, it supports 28mm standard necks and operates with full automation to remove impurities. The Corfill Sara Elp 32, manufactured in 2012, fills bottles with 56 stainless steel filling valves (AISI 316). Because these valves resist corrosion, they ensure accurate dosage. Additionally, the isobaric system maintains constant pressure, preserving carbonation and product quality. Since the Siemens PLC optimizes operations, it adjusts quickly to handle various product types efficiently.

Condition: used, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Psdow Ahfyepfx Aahjrc Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. Technical conclusion The used bottling line SIDEL for still water in PET bottles 25200 bph delivers a robust, efficient, and scalable bottling solution. Undoubtedly, SIDEL’s engineering ensures durability and optimal integration. For this reason, companies seeking a cost-effective way to expand production will find this line technically sound. Ultimately, it represents a valuable opportunity for those who need to scale operations without investing in new machinery.