Used Deckel for sale (702)

Condition: not inspected (used), Year of construction: 2000, operating hours: 26,350 h, functionality: unexamined, machine/vehicle number: 71401453, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: MILLPLUS, spindle speed (max.): 12,000 rpm, No reserve price – guaranteed sale to the highest bidder! Submission of a bid obligates timely collection either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Max. spindle speed: 12,000 rpm X-axis feed rate: 20 – 15,000 mm/min Y-axis feed rate: 20 – 15,000 mm/min Z-axis feed rate: 20 – 15,000 mm/min Rapid traverse X-axis: 40 m/min Rapid traverse Y-axis: 40 m/min Rapid traverse Z-axis: 40 m/min Linear encoder resolution X-axis: 0.001 mm Linear encoder resolution Y-axis: 0.001 mm Linear encoder resolution Z-axis: 0.001 mm Input increment X-axis: 0.001 mm Input increment Y-axis: 0.001 mm Input increment Z-axis: 0.001 mm Positioning tolerance X-axis: 0.010 mm Positioning tolerance Y-axis: 0.010 mm Hfjdpoym Aucsfx Aa Sof Positioning tolerance Z-axis: 0.010 mm Tool holder: SK 40 Max. tool diameter: 100 mm Max. tool length from spindle nose without tool breakage control: 350 mm NC rotary table clamping surface: 630 mm diameter T-slot spacing: 63 mm Number of T-slots: 9 Centering bore: 50 mm diameter Max. table rotation speed: 10.7 rpm Table feed rate: 3,600°/min Table encoder resolution: 0.001° MACHINE DETAILS Control: MILLPLUS Operating voltage: 400 V Frequency: 50 Hz Rated current: 80 A Connected load: 44 kVA Dimensions & Weight Dimensions (L x W x H): 5,500 x 4,500 x 2,500 mm Weight: 10,000 kg Recorded spindle hours: 26,350 h EQUIPMENT 60-position automatic tool changer Chip conveyor Coolant system Note: The machine can be transported on a truck with a width of 3,000 mm. External reference: Elos – Lot 6

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 426 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel Range X-axis: 1,250 mm Travel Range Y-axis: 880 mm Travel Range Z-axis: 800 mm Main Spindle Max. Speed Range: 12,000 rpm Drive Power: 15 / 10 kW Max. Torque: 500 Nm Tool Holder: SK 40 Work Table Hjdpsyxmmnefx Aa Seff Clamping Surface: 1,500 x 1,050 mm Max. Table Load: 2,500 kg Number of T-slots: 10 T-slot Width: 18 H7 mm T-slot Pitch: 100 mm Tool Changer Number of Tool Stations: 30 Max. Tool Diameter: 80 mm Max. Tool Diameter with Empty Adjacent Pocket: 160 mm Max. Tool Length: 315 mm Max. Tool Weight: 8 kg Max. Total Weight: 100 kg Feeds Rapid Traverse (X / Y / Z axis): 15 m/min Feed Rate: 10,000 mm/min MACHINE DETAILS Control Model: TNC 430 Heidenhain Total Power Requirement: 29 kW Dimensions & Weight Space Requirement: approx. 7.0 x 5.0 x 3.3 m Machine Weight: approx. 16.0 t EQUIPMENT Documentation Chip Conveyor Coolant System High-Pressure Coolant Measuring Probe (Manufacturer: Heidenhain) Internal Coolant Supply Note: The transport rigging must be arranged by the buyer!

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: TNC 430 Heidenhain, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,250 mm Travel range Y-axis: 880 mm Travel range Z-axis: 800 mm Main spindle Max. speed range: 12,000 rpm Hfjdpfx Aoyxmd Tea Sjf Drive power: 15 / 10 kW Max. torque: 500 Nm Tool holder: SK 40 Work table Clamping area: 1,500 x 1,050 mm Max. table load: 2,500 kg Number of T-slots: 10 T-slot width: 18 H7 mm T-slot spacing: 100 mm Tool changer Number of tool stations: 60 Max. tool diameter: 80 mm Max. tool diameter with free adjacent station: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Max. total weight: 100 kg Feeds Rapid traverse (X / Y / Z-axis): 15 m/min Feed rate: 10,000 mm/min MACHINE DETAILS Control model: TNC 430 Heidenhain Total power requirement: 29 kW Dimensions & Weight Space requirements: approx. 7.0 x 5.0 x 3.3 m Machine weight: approx. 16.0 t EQUIPMENT Documentation Chip conveyor Coolant system Tool changer Note: Transport tackle must be organized by the buyer!

Condition: ready for operation (used), Year of construction: 1999, operating hours: 51,147 h, functionality: unexamined, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, Equipment: chip conveyor, TECHNICAL DETAILS Travel X-axis: 1,250 mm Travel Y-axis: 880 mm Travel Z-axis: 800 mm MACHINE DETAILS Control: HEIDENHAIN Operating hours Machine hours: 93,440 h Spindle hours: 51,147 h EQUIPMENT Hfedpfx Aoyxc Etoa Sjf Tool changer Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, operating hours: 41,245 h, functionality: unexamined, machine/vehicle number: 1113000335, travel distance X-axis: 880 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller manufacturer: HEIDENHAIN, Equipment: chip conveyor, TECHNICAL DETAILS Hfodpfx Aasyxc Dce Sef X-axis travel: 880 mm Y-axis travel: 630 mm Z-axis travel: 630 mm Number of axes: 4 MACHINE DETAILS Control: HEIDENHAIN Operating hours Machine hours: 74,780 h Spindle hours: 41,245 h EQUIPMENT Chip conveyor Filtration system

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 815, spindle speed (max.): 8,000 rpm, overall weight: 600 kg, workpiece length between centers: 336 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection, either between 11.05.2026 and 13.05.2026, or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Universal indexing head center height: 170 mm Tailstock center height: 120 mm (with intermediate support: 170 mm) Maximum workpiece length between centers: 336 mm Workpiece diameter with cantilevered mounting: approx. 600 mm Maximum tip length: 950 mm Internal taper of the dividing spindle: Morse 4 / Unified 40 T-slots: 12 mm (machine base) T-slots: 8 mm (additional elements) Grinding stroke: 190 mm Transverse movement of tool holder: 100 mm Vertical movement of grinding head: 325 mm Tool holder movement range: 230 mm Indexing device on tool slide: 330 mm Grinding head mount rotation: 360° Tool holder rotation: 360° Grinding head rotation: 360° Universal attachment rotation: 360° Three-phase motor: 0.7 / 0.85 kW DC motor: 1.3 kW Spindle speed: 4,000 / 8,000 rpm Hfjdpeym Alhjfx Aa Ssf Infinitely variable DC speed: 2,000–10,000 rpm MACHINE DETAILS Operating voltage: 380 V Frequency: 50–60 Hz Rated current: 14 A Dimensions & Weight Dimensions (L x W x H): 1,400 x 900 x 1,900 mm Weight: 600 kg EQUIPMENT Two-axis digital display Extensive range of accessories suited to the machine External Reference: Segato

Condition: used, operating hours: 22,802 h, functionality: unexamined, machine/vehicle number: 71401454, controller model: MillPlus, MACHINE DETAILS Control: MillPlus Electrical data Hfjdpfx Aeyx U Nqja Sof Voltage: 400 V Frequency: 50 Hz Operating hours Operating hours: 37,732 h Spindle hours: 22,802 h

Condition: excellent (used), Year of construction: 2008, Deckel Maho DMG DMU 50 eVo linear Year: 2008 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 rpm Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Cooling Cooling through the Spindle Center : 40 bar Hodpfoy Ap D Dsx Aa Ssff Tool system Tool holder: SK40 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Weight 5900 kgs Accessories/options: Chip conveyor Blum touch probe Blum Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compensator Direct measuring system XYZ Electrical cabinet active cooling unit Coolant tank with high pressure coolant pump, paper band filter system With tool holders, SK40 type, 25 pieces Full set of documentations Under power in our warehouse! Video available upon request!

Condition: good (used), Year of construction: 2003, x-travel 500 mm y-travel 500 mm z-travel 420 mm Control Heidenhain / Millplus total power requirement 35 kW weight of the machine ca. 5,7 t Hfsdpfx Aasymqxco Ssf

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, CNC Universal Milling & Drilling Machine DECKEL MAHO DMU 80 monoBlock With Heidenhain iTNC 530 path control Year of manufacture: 2005 Travel distances: X 980 Y 630 Z 630 Speed range: 0 – 18,000 rpm stepless (HSK 63) With the following accessories: Rigid angle table, 1250 mm x 700 mm clamping surface 3D measuring probe Heidenhain Hsdpfx Ajy A Sf Rsa Ssff Tool measurement in the working area via BLUM Laser Vertical tool changer with 32 magazine slots (HSK 63) Full protection enclosure with sliding doors and internal lighting Electronic handwheel Operating modes 3 + 4 Chip conveyor Coolant system 3 height-adjustable machine mounts Spindle oil cooler Control cabinet cooling unit (Rittal) Operating manuals

Condition: used, functionality: fully functional, Milling machine Deckel FP 4 M 3-axis digital readout Heidenhain Work area: 500 x 400 x 400 mm Drive power: 4 kW Fixed table 800 x 460 mm Chip tray Spindle taper SK 40 Speed range n 50-2500 rpm Feed rates 8-630 mm/min Rapid traverse 1.3 m/min Hfsdpfx Aasy Awz Rs Ssf Space requirement approx. 2 x 2 x 2 m Weight approx. 1650 kg

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) Hfjdoy A Ip Ejpfx Aa Sef • No robots/automation/chip conveyor/bar feeder information provided in the text above Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2005, operating hours: 42,768 h, controller manufacturer: HEIDENHAIN, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DECKEL MAHO DMU 50 eVo linear was manufactured in 2005. It features a HEIDENHAIN control, a 40bar IKZ, a 60-tool magazine, and a spindle speed of 18k rpm. The machine includes automation capabilities fully adjustable for different product formats and positioning. If you are looking to get high-quality milling capabilities, consider the DMG DECKEL MAHO DMU 50 eVo linear machine we have for sale. Contact us for more information. • Tool magazine: 60 tools • Through-spindle coolant (IKZ): 40 bar • Spindle overhauled in 2024 • B and C axes overhauled in 2024 Additional equipment • Automation (product handling), freely adjustable for product format and positioning • Paper belt filter • Blum laser tool break detection • Extraction system excluded Hfedpfsx Rd Hpsx Aa Sof Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 700 mm z-travel 600 mm turning speeds 12000 1 U/min control Heidenhain total power requirement 59 kW weight of the machine ca. 10,6 t Hjdpfsy A Tdnsx Aa Seff

Condition: used, Year of construction: 2005, Technical details: x-travel: 800 mm y-travel: 700 mm z-travel: 600 mm table load capacity: 800 kg control: SIEMENS 840D shopmill turning speeds: 12.000 1/min tool adaptor: HSK 63 rapid traverse: 50 m/min tool change unit: 30 Pos. electr. connected load with add. coolant: 56 kVA weight of the machine ca.: 9,5 t transport measurements machine: 4 x 2,5 x 2,75 m 5 Axis simultaneously machining center, Baxis (NC-head) and NC- rotary-swivelling-table dia 900/630mm, internal cooling device 40 bar, 600l prepared for 3D-touchprobe HEIDENHAIN TS 641 (without touchprobe), prepared for el. handwheel (without handwheel), mode 4, approx. 85.000 h mainswich ON , approx. 55.000 h Spindle ON (last spindle change in nJuly 2021 at approx. 50.000h) * Hfedpfxjy Ai Nae Aa Sef

Condition: excellent (used), Year of construction: 1999, Yang Eagle SMV 1000 Year of manufacture: 1999 Control: - Fanuc OM - Electronic handwheel Main spindle: - max. 6000 rpm Tool changer: - 20 magazine slots Travel paths: - X-1020, Y-510, Z-510 mm Hjdpfx Aajyz R Ubo Sjff Table: - Clamping surface 1070 x 500 mm - Chip conveyor Availability: - Immediately or by arrangement

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 15025702504, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 21 kVA, controller manufacturer: HEIDENHAIN, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, table width: 500 mm, table length: 700 mm, table load: 310 kg, overall weight: 15,000 kg, spindle speed (max.): 12,000 rpm, mount diameter: 40 mm, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, control voltage: 220 V, Equipment: chip conveyor, documentation/manual, DECKEL MAHO DMU 70 VL Universal Machining Center - Tool holder: SK 40 - Input increment X/Y/Z: 0.01 mm - Jog mode X/Y/Z: 20 - 2000 mm/min - Linear scale resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-Axis (without partition): 2350 mm, with partition: 2 x 710 mm - incl. tool changer, 2 x 32 positions - max. tool length from spindle nose: 315 mm - max. tool weight for automatic tool change: 6 kg - max. total tool weight in magazine: 80 kg - required compressed air: approx. 5.5 - 8 bar Worktables: - NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - max. table rotation speed: 16.73 rpm - swiveling speed: 14.73 rpm - swivel range: 0 to 180° - input/display increment: 0.001° Hfodeym Smbspfx Aa Sef - weight: approx. 310 kg - one fixed table - dimensions: 1000 x 600 mm - T-slot spacing: 63 mm - number of T-slots: 9/14 H7 - incl. chip conveyor and coolant system Note: the machine can be transported on a truck with up to 2800 mm width! Note: The item must be collected between 21.04. and 30.04.2026 at a yet-to-be-agreed date. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 15025704014, travel distance X-axis: 2,350 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 520 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 41 kVA, controller manufacturer: HEIDENHAIN, controller model: TNC 426, total height: 2,800 mm, total length: 9,000 mm, total width: 3,200 mm, spindle speed (max.): 18,000 rpm, tool diameter: 40 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, DECKEL MAHO DMU 70 VL Universal Machining Center Hfodeym Sd Tepfx Aa Ssf - Operating voltage: 400 V - Frequency: 50 Hz - Connected load: 41 kVA - Rated current: 80 A - Tool holder: HSK 63 - Input increment X/Y/Z: 0.01 mm - Setup mode X/Y/Z: 20 - 2000 mm/min - Linear encoder resolution X/Y/Z: 0.001 mm - Position tolerance in X/Y/Z: 0.010 mm - Working area travel X-axis (without dividing wall): 2350 mm, with dividing wall: 2 x 710 mm - including tool changer 2 x 32 positions - Max. tool length from spindle nose: 150 mm - Required compressed air: approx. 5.5 - 8 bar - Work tables: 2 x NC rotary table, 700 x 500 mm - with swivel axis - T-slot spacing: 63 mm - Swivel range: 0 to 180° - Input and display increment: 0.001° - Weight: approx. 310 kg - Including all tool holders visible on the photos in the tool changer, as well as chip conveyor and coolant system - Note: The clamping systems on the fixture tables are not included in the scope of delivery. Important: The machine can be transported on a truck up to 2800 mm width! Important: The item must be collected between 21.04. and 30.04.2026 on a binding date to be agreed upon in advance. FCA D-96257 Marktgraitz – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 71.255396, travel distance X-axis: 600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 500 mm, controller model: MILLPLUS, total height: 2,700 mm, total length: 6,000 mm, total width: 4,000 mm, table width: 630 mm, table length: 900 mm, overall weight: 10,000 kg, number of slots in tool magazine: 30, mount diameter: 40 mm, Equipment: chip conveyor, DECKEL MAHO DMU 80 P Universal Machining Center - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 80 A - Table with 9 T-slots - Tool holder: SK 40 The machine is equipped with a 30-position tool changer, including the tool holders visible in the photos within the tool changer, as well as chip conveyor and coolant system. Note: The machine vice shown on the clamping surface is not included in the scope of delivery! Note: The item must be collected between 21/04 and 30/04/2026 at a bindingly agreed appointment. Hfodpfx Aeym Rk Sja Sof FCA D-96257 Marktgraitz – loaded onto truck

Condition: used, x-travel 500 mm y-travel 400 mm z-travel 400 mm Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DECKEL MAHO CNC Universal Milling Machine model DMU 50 M year 1998 Working range: Longitudinal stroke X Axis 500 mm Vertical stroke Z Axis 400 mm Cross stroke Y Axis 400 mm C-axis – table turning, manual 360 ° B-axis – table swivelling, manual ° Table area Ø 700 x 500 mm Inclination range of table (manually) + / - ° Rotation of table (manually) 360 ° Max. Table load approx. 200 kg Maximum distance table – spindle nose 550 mm horizontal distance machine – spindle nose 2 – 6 mm Tool holder Taper ISO 40 Spindle speeds 20 – 4,500 rpm Feed rate max. 5.000 mm/min AC main drive, 0% / 40% power-on time approx. 9 / 13 kW Total electrical load, approx. 15 kW - 400 V - 50 Hz Weight, approx. 3,000 kg Accessories / Special Features • 3 Axis HEIDENHAIN Point to Point Control Model TNC 124 with Monitor, direct programming and input of data and electronic handwheels. • All 3 axis are operated by the milling head, the table is stationary so also out of proportion workpieces can be machined. • Rotary Table can be manually rotated 360° and manually inclined + / -° (each with clamping). The digital read-out of the angles is integrated in the CNC control • Simple coolant unit with pump and tank, built-on switch cabinet (SIEMENS parts) • Pneumatic tool claomping, Some tool holders available, manuals, CE-Certificate, etc. Condition : very good condition ! Ideal for training center or single parts machining ! Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 0 % Net, after conclusion of contract, before loading We always have a large selection of milling machines - CNC or conventional - available. Please let us know your requirements. Hfsdpfx Aaev Td Elj Sef

Condition: ready for operation (used), Year of construction: 2002, operating hours: 24,396 h, travel distance X-axis: 640 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table width: 600 mm, table length: 850 mm, table load: 600 kg, overall weight: 7,000 kg, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 30, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2002. It features a travel of 640 mm on the X-axis, 600 mm on the Y-axis, and 500 mm on the Z-axis. The machine has a maximum spindle speed of 12,000 rpm and a tool magazine capacity of 30. If you are looking to get high-quality machining capabilities, consider the DMG DECKEL MAHO DMC 64V linear vertical machining centre we have for sale. Contact us for further details. • Condition: Used (good) • Operating hours: 24396 h • Electrical: • Nominal power: 39 kVA • Voltage: 400 V Hfjdeyz Tkfopfx Aa Sef • Frequency: 50 Hz • Secondary voltage: 230 V • Control voltage: 24 V • Current: 63 A • Current (max): 56 A • Rapid traverse: • X: 70 m/min • Y: 40 m/min • Z: 40 m/min

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 630 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,500 mm, table load: 400 kg, spindle speed (max.): 18,000 rpm, number of axes: 4, This 4-axis DECKEL MAHO DMU-60T was manufactured in 2005. It features a robust vertical machining centre with X, Y, Z travels of 630 mm, 560 mm, and 560 mm respectively. Equipped with a high-speed spindle up to 18,000 rpm and a HSK-63A taper, it ensures precision and efficiency. The machine includes a Heidenhain MillPlus CNC control and a 20-tool magazine. Consider the opportunity to buy this DECKEL MAHO DMU-60T vertical machining centre. Contact us for further details regarding this machine. • Table size (L x W): 1000 x 600 mm • CNC control: Heidenhain MillPlus • Tool magazine capacity: 20 tools • Through-spindle coolant: Yes Additional equipment Hsdpfxsx D I Ibo Aa Ssff • Chip conveyor Dimensions Machine Depth 3000 mm

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,700 h, controller manufacturer: SIEMENS, controller model: Sinumerik, table load: 3,100 kg, overall weight: 24,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 35,000 W, tool weight: 6,000 g, number of axes: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It features a robust vertical machining center with a high-speed main drive up to 40 kW and rapid traverse rates of 100 m/min on the X-axis and 60 m/min on Y- and Z-axes. The work table measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking to get high-quality milling capabilities consider the DECKEL MAHO DMF 250 linear machine we have for sale. Contact us for more information. Additional equipment • Safety Equipment: Monitored and locked work area door; Key switch for normal and set-up mode; Limited functions when the door is open Machine Benefits Technical Machine Benefits • Feed speed: up to 20000 mm/min • Clamping surface: 3100 × 900 mm • T-slots: 9 pieces, 100 mm apart • Tool magazine capacity: 30 places • Resolution of measuring system: 0. 001 mm Hfjdpsx Nr Tuefx Aa Sof • Electrical connections: mains connection 3n/pe~400/230 v, 50/60 hz; power consumption 82 kva • Pneumatics: compressed air 5. 5-8 bar; air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29280 kg Extra Information Room Temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 -Magazine cabinet -Tool change is performed via a shuttle -Tool holder only on request and subject to availability (extra) -Machine is a 3-axis machine (rotary table not available) A further configuration or the AB is no longer available. Z-axis brake defective, roller shutter in machine room defective, screen cable defective, display defective (loose connection)

Condition: used, Year of construction: 2011, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A 63 swivellable NC: ° table surface area 1.000 x 600 mm table diameter Ø 600 mm T-slots 1x 14 x H7, 8x 14 H12 max. table load 500 kg rotatable C: 360 ° number of toolpositions 2x12 (24) pos. tool taper HSK-A 63 max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool weight 8,0 kg max. tool length 315 mm total power requirement 45 kVA weight of the machine ca. 6,8 t Hsdpfxjyz Dcfo Aa Soff dimensions of the machine ca. 4,5 x 4,5 x 2,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - Swivel-Millinghead - Package for tropical climate

Condition: good (used), Year of construction: 1994, Deckel Maho DMC 103 V Control: Heidenhain Working area: 1,000 x 600 x 600 mm Spindle speed: max. 8,000 rpm Hfjdpoykbiyofx Aa Sef Torque: 83 Nm Tool holder: SK 40 Table clamping surface: 1,200 x 600 mm Max. table load: 800 kg Required space, approx.: 3.7 x 3.6 m