Used Morbidelli U 26 for sale (63)

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, travel distance X-axis: 4,400 mm, travel distance Y-axis: 1,300 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 45 m/min, Equipment: CE marking, The machine has the following configuration: Drilling units: Upper unit with 30 vertical and 6 horizontal spindles Milling unit 1: Upper unit, 5 controlled axes, 7.5 kW motor power, liquid cooling system Milling unit 2: Upper unit, 11 kW motor power, 18,000 rpm, liquid cooling system Tool magazine 1: 24 positions, mounted at the rear of the machine Tool magazine 2: 6 positions, mounted on the working head TECHNICAL DETAILS Dcjdpfx Apjyzy S Nstsl X-axis travel: 4,400 mm Y-axis travel: 1,300 mm Maximum workpiece pass-through height: 400 mm X-axis traversal speed: 40 m/min Y-axis traversal speed: 45 m/min Z-axis traversal speed: 22.5 m/min MACHINE DETAILS Control system: WINDOWS Machine programming software: XILOG Vacuum pump individual capacity: 250 m³/h Connected load: 35 kW EQUIPMENT Worktable with vacuum rail supports Number of vacuum rails: 8 Vacuum clamping for workpiece CE safety standards Automatic chip extraction The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 8340

Condition: excellent (used), Year of construction: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drill 3. MORBIDELLI - ZENITH F2 CDM through-feed drill 4. MAHROS - BRUSH SF unloading system Machine connected - works daily in one shift. The first drill has: upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs The second drill has: Dodegb D Afepfx Aptscl upper vertical heads - 3 pcs lower vertical heads - 6 pcs horizontal heads L + P- 2 pcs rear horizontal heads - 6 pcs Below are details of the machine and a video The possibility of seeing the machine every day. Line availability August 2021

Condition: good (used), Year of construction: 2009, functionality: fully functional, The supporting structure is made from a thick, monolithic steel block with a reinforced core. The construction is triangular with a wide base and is designed to ensure the machine's stability under all processing conditions. Guideway lubrication is centralized, meaning all guideways on the machine are lubricated from a single point. The CNC features a full aluminum worktable with grooves for vacuum limitation or fixture mounting. This type of worktable is especially useful for “NESTING” operations. The electrical cabinet is built according to international standards, ensuring total reliability of the integrated components. Technical specifications: Working dimensions: With vertical milling: 3260 x 1250 mm With drilling head: 3330 x 1540 mm Maximum workpiece height: 180 mm X, Y, Z axis travel: 3420, 1690, 280 mm Tool storage positions: 12 Vacuum pump: 100 m3/h Power: 10.5 kW Rated voltage: 400 V Frequency: 50/60 Hz Machine weight: 3400 kg Software: Xilog3 (supports .dxf file import) Dodpfx Asy Nv Ucjptscl Year of manufacture: 2009

Condition: good (used), Year of construction: 1998, functionality: fully functional, operating hours: 25,000 h, input voltage: 380 V, input current: 35 A, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 180 mm, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,350 mm, workpiece height (max.): 110 mm, workpiece weight (max.): 200 kg, number of axes: 3, number of slots in tool magazine: 4, controller manufacturer: num, total height: 27,000 mm, total length: 5,500 mm, total width: 2,700 mm, overall weight: 4,000 kg, table length: 3,000 mm, table width: 1,100 mm, year of last overhaul: 2024, Equipment: documentation/manual, Well-maintained CNC machining center with low operating hours. Milling unit 6.6 kW ISO 30 with 4-position tool changer Milling unit 6.6 kW ISO 30 MANUAL TOOL CHANGE Drilling unit 10+4 drills Vacuum pump 100 m³ Automatic machine lubrication Table 3000x1100 mm Updated Xilog plus software Refurbished NUM 1040 controller Djdpjyurwpsfx Aptscl

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: AL/009416, functionality: fully functional, travel distance X-axis: 5,500 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 400 mm, number of axes: 5, Equipment: CE marking, 5-AXIS CNC WORKING CENTER MORBIDELLI MOD. AUTHOR X5.55 EVO – CE RULES - Working dimensions: X 5.500 mm Y 1.700 mm Z 400 mm - Chip conveyor belt for wastes Dsdpjywd Adjfx Aptjcl - Automatic centralized lubrication system - Optimized and centralized dust extraction system - 5-axis milling unit 11 kW (15 HP), HSK-63 PRISMA - Liquid-cooled electrospindle - Drilling unit with No. 18 vertical spindles and No. 6 horizontal spindles - TV-MORBIDELLI worktable with 10 supports, L = 1,500 mm - Laser device for suction cup positioning - Saw blade Ø 300 mm - No. 2 additional central side stops - No. 2 additional side stops - No. 30 suction cups - Tool magazine with 12 positions - Becker vacuum pump 250 m³/h (year 2022) - NUM CNC control - No. 10 lifting devices to assist loading - Voltage: 400 V / 50 Hz - S/N AL/009416 - Year 2009

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: AA2/004582, functionality: fully functional, operating hours: 14,500 h, travel distance X-axis: 3,120 mm, travel distance Y-axis: 1,320 mm, number of axes: 5, TECHNICAL DETAILS X-axis travel: 3,120 mm Y-axis travel: 1,320 mm Number of axes: 5 MACHINE DETAILS Operating hours: approx. 14,500 h EQUIPMENT Suction pads Mounted air-blow nozzle Newly installed control unit Dcjdpey Akr Aefx Aptel Note: The machine has already been dismantled by the manufacturer.

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: AL/008514, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, workpiece height (max.): 60 mm, overall weight: 2,800 kg, controller model: PC mit Xilog Plus Software, TECHNICAL DETAILS Working area X-axis: 3,000 mm Working area Y-axis: 1,000 mm Workpiece thickness (processable): 60 mm Upper drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Dedpfx Apsydl Adetjcl Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW Lower drilling and milling unit Electrospindles: 1 Vertical spindles: 24 Horizontal spindles X-axis: 2 Horizontal spindles Y-axis: 2 Grooving saw unit X-direction: 1 Grooving saw unit power: 2.2 kW MACHINE DETAILS Control: PC with Xilog Plus software Weight: 2,800 kg EQUIPMENT Panel clamps Manual workpiece loading on Flotex table Automatic workpiece unloading Automatic central lubrication

Condition: used, Year of construction: 2008, PC based Numerical Control with XILOG PLUS software Mobile pine cone with command functions Working range on the X axis is 4400 mm Working range in Y axis 1360 mm Working range in Z axis mm. 180 Z axis travel 200 mm N° 2 work camps in X Dcsdpfxopvai Ds Aptsl No. 8 manually adjustable panel support bars with positioning LEDs N° 3 suction cups for holding the panel for each bar N° 4 pneumatic Bakelite bars for lifting the panel (helping with loading and unloading) N° 1 Vertical electrospindle with Vector axis with automatic tool change, HSK 63 connection cones Automatic tool changer with 12 positions on the operating head Drilling head composed as follows: No. 8 vertical X-axis spindles N° 5 Y-axis vertical spindles N° 4 horizontal spindles in X axis N° 2 horizontal spindles in Y axis Safety system with bumper system on the operating head N° 1 vacuum pump 100 m3\h Automatic lubrication

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Djdjxg Izaopfx Aptjcl Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 3,680 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, TECHNICAL DETAILS Working area: 3,680 x 1,260 x 150 mm Milling motor: 1 unit, 8.5 kW (11.5 HP) Dcodpfx Aoxzfx Esptsl Tool changer: 1 automatic rotary magazine with 12 positions Drill beam: 18 vertical, 8 horizontal drills, and 1 "X" saw drill Software: DXF compatible Safety standard: BUMPER protection, CE standards Weight: 3,000 kg Note: The machine has a software issue and does not include a pump. The estimated cost for correction is approximately €3,000 each.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, input voltage: 400 V, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 80 mm, We offer this very good Morbidelli Uniflex HP Throughfeed Borer and Router CNC, year of construction 2016. Manufacturer: Morbidelli Model: Uniflex HP Year of manufacture: 2016 Condition: very good Category ID: 2074 Type ID: 151 Machine type: Throughfeed Borer and Router CNC The Morbidelli UNIFLEX HP is a high-performance CNC drilling and routing centre designed for precision panel processing in furniture and cabinet manufacturing. It allows drilling on multiple faces of a panel and routing operations with high accuracy while minimizing setup time through automated clamping and CNC control. Key Features • 6-side panel drilling capability with upper and lower machining heads • Up to 134 independent spindles for high production throughput • RO.AX rotoaxial spindle technology ensuring zero backlash and extremely accurate drilling • Dual independent clamps eliminate machine setup time and allow simultaneous operations • Ability to process two overlapped panels simultaneously • Integrated saw blade in X-axis for panel cutting operations • Heavy-duty welded O-frame structure for maximum rigidity and precision • CNC controlled panel movement with brushless motors and ball screws • Xylog Plus 2 CNC software with PC interface Drilling System • 96 vertical drilling spindles (48 upper + 48 lower) • Horizontal drilling spindles: o 8 + 8 in X direction o 4 + 2 in Y direction • Maximum spindle speed: 6,000 rpm • Integrated X-axis saw blade: o Diameter: 125 mm o Speed: 7,500 rpm CNC Control & Software • Industrial PC with Windows operating system • 17" colour display and keyboard interface • Xylog Plus 2 programming software • Programming options: Parametric programming • DXF and ASCII file import support • Simulation and optimisation of drilling cycles Panel Capacity • Panel length: 250 – 3000 mm • Panel width: 70 – 1300 mm Dsdpfxoyr Uguo Aptjcl • Panel thickness: 10 – 80 mm • Maximum panel weight: 100 kg Axis Speeds • X axis: 120 m/min • Y axis: 35 m/min • Z axis: 30 m/min Machine Requirements • Compressed air: 6.5 bar • Average air consumption: 500 Nl/min • Dust extraction airflow: o Upper head: 5000 m³/h o Lower head: 2250 m³/h Additional Equipment Included • Panel length measuring device • Electrical cabinet with air conditioning • Manual loading and unloading stations with cross belts If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), CATALOG NUMBER 6059 TECHNICAL DATA Dcsdpfx Apezr U Dlotjl - Number of horizontal spindles: 2×20 pcs - Number of vertical spindles: 1×20 pcs - Distance between the outermost spindles: 610 mm - Distance between spindles: 32 mm - Feed cylinder stroke: 60 mm - Max length of workpiece: 3400 mm - Horizontal spindle adjustment: up/down, front/back - Vertical spindle adjustment: right/left - Each drilling unit can operate independently - Right/left drill bits, threaded mounting (screw-in) - 3 pneumatic clamps - Motor power: 4×1.85 kW - Air requirement: 6-8 bar - Dimensions (L/W/H): 4600x1180x2200 mm - Weight: approx. 1500 kg Net price: PLN 12,900 Net price: EUR 3,070 depending on exchange rate, reference 4.2 EUR (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Numerical Control/Software MAESTRO Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 Dsdpfx Apezza Sgjtscl WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC with spindles: - No. 24 Independent vertical boring spindles - No. 11 Independent horizontal boring spindles (6 in X + 4 in Y) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 6,6 Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions) OPTIONAL: Panel loading robot + Robot for unloading machined panels

Condition: excellent (used), EDGE BANDING and CNC Flexible through-feed DRILLING and ROUTERING LINE Min/Max workpieces (panels) width (X axis) with Flexa 912: mm 250 / 3000 Min/Max workpieces (panels) thickness (Z axis) with Flexa 912: mm 12 / 50 Min/Max workpieces (panels) length-depth (Y axis) with Flexa 912: mm 100 /1350 (o 650+650) 238000A) “DOUCET” motorised roller conveyor for feeding panels to the “HOMAG” edge-bander 238000B) “HOMAG” edge-banding machine, Model KL 73/A3/S2 238000C) “DOUCET” motorised roller conveyor for feeding edged panels to “MORBIDELLI” Flexa 912 238000D) “MAHROS” 90° transfer unit (infeeding “MORBIDELLI” Flexa 912) 238000E) "MORBIDELLI" Gantry (Portal) CNC (Drilling and Routering) Mod. Flexa 912 - N. 2 upper working head, EACH consisting of: - 1 type T35M drilling head with 35 vertical spindles (21 on the Y-axis + 14 on the X-axis) - 1 (movable) drilling head with 14 vertical spindles (on the Y-axis) for fittings - 2 heads with 2 horizontal spindles each (4 total) on the Y-axis - 1 HKS 63 vertical electric spindle (6.6 kW) - N.2 horizontal units (1 R + 1 L) EACH with 21 drilling spindle (21 + 21 = total 42) Djdpfx Apszza Rvjtocl 238000F) “MAHROS” 90° transfer unit (outfeeding “MORBIDELLI” Flexa 912) 238000G) "RBO (BIESSE)" Stacker (Bridge Frame), double station Mod. Selecta SC

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Dcedpfx Apexy Tmnetol

Condition: used, Year of construction: 2018, operating hours: 10,347 h, total height: 2,400 mm, total length: 7,000 mm, total width: 2,400 mm, Colour: Grey Empty weight: 3.450 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Operating hours: 10347 - Number of milling spindles [pcs.]: 1 Dedpfoxtbgpjx Aptecl - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 24000 - - Main motor power [kW]: 8.5 - - C-axis present: Yes - Type milling table: Beam table - Tool holder: HSK-F63 - Drilling unit present: Yes - └ Motor power [kW]: 2.64 - └ Horizontal drill spindles [pcs.]: 10 - └ Vertical drilling spindles [pcs.]: 24 - Saw unit present: Yes - Tool changer positions [pcs.]: 25 - Vacuum pump present: Yes - └ Number [pcs.]: 1 - └ Brand: Becker - └ Type: Picchio - └ Year of manufacture: 2018 - └ Main motor power [kW]: 2.5 - └ Capacity [m³/h]: 108 - └ Connection diameter [mm]: 80 - └ Oil free: Yes - Working range X [mm]: 3110 - Working range Y [mm]: 1320 - Z-axis working range [mm]: 180 - Voltage [V]: 400 - Current consumption [A]: 47.2 - Fuse [A]: 63 - Power [kW]: 10.0 - Transport dimensions: 7000mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 3450kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Djdpfx Apovvi N Ietocl

Condition: excellent (used), C.N.C. WORKING CENTER 3 axes (X-Y-Z) Vertical position of the panel (workpiece) Movable panel (workpiece), movable working head Dedpfx Aszx Dvdeptjcl Numerical Control MAESTRO consolle "eye-M PRO" Software “3D PROBE" per controllo automatico dimensioni pannello Safety cabin (enclosure) of the working head No. 2 Workpieces fixing clamps (for the panels introduction in the working area Minimum workpieces dimensions (X - Y - Z) mm 200 x 50 x 8 Maximum workpieces dimensions (X - Y - Z) mm 3050 x 1300 x 95 Total installed power (A) 43 WORKING GROUPS: No. 1 Drilling head (5-sided with Ro.Ax. roto-axial technology) F31LTC (power Kw 3.9) with spindles: - No. 21 Independent vertical boring spindles - No. 10 Independent horizontal boring spindles (6 in X + 4 in Y) - No. 3 Independent boring spindles (for hinges) No. 1 Circular Grooving Saw (on X axis) dia. (mm) 125 No. 1 Vertical electro-spindle (HKS63) power Kw 7,5 Automatic Tools Changing System - Tools storage plate (No. 6 folds-positions)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Work in X, Y, Z axes Working area 3100 x 1340, Z axis = 180 mm Dcodpfx Ajzx Amuoptsl Horizontal drills on X axis – 6 pcs Horizontal drills on Y axis – 4 pcs Vertical drills on X axis – 8 pcs Vertical drills on Y axis – 6 pcs Two tool magazines: side – 11 positions and transfer – 14 positions Grooving saw on X axis Spindle 8 kW, air-cooled, 600–24,000 RPM, HSKF63 Becker Vacuum Pump 2.2 kW Option for dual-field operation X axis speed – 25 m/min (programmable) – 56 m/min (vector) Y axis speed – 50 m/min (programmable) – 56 m/min (vector) Z axis speed – 15 m/min

Condition: used, Year of construction: 2016, Working area X-Y-Z: 5300 x 1700 x 180 mm Travel range X-Y-Z: 6040 x 1810 x 280 mm Drilling head with 30 + 8 spindles Speed: 6000 rpm Power: 2.2 kW Automatic central lubrication Dcedpfjy Dta Sjx Aptol Work table TV with 10 supports, L=1500 4 working areas 2 cross lasers Vacuum pump 250 m³/h PC control, Windows Vertical milling unit ISO 30, 7.5 kW with tool changer RAPID 14 and vector axis Additional drilling unit (E-axis) Dongle for XILOG software Storage location: Sonnefeld

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. Dsdpfxszvhlke Aptscl The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2018, CNC-CONTROLLED MACHINING CENTER AUTHOR M 200 AUTHOR M200 3710x1620 Z250 - CNC-controlled machining center 1 Technical data Work area I.M.S. I.U. Work area X-axis 3710 mm * 146" * Work area Y-axis 1620 mm * 63¾" * Workpiece passage Y 1900 mm 74¾" Workpiece passage Z 250 mm 9¾ Workpiece length for pendulum machining 1700 + 1700 mm 67" + 67" Travel speed of the X-Y axes PRO-SPACE 56 m/min 184 ft/min Travel speed of the X-Y axes PRO-SPEED 78 m/min 256 ft/min * Distance covered by all tools in the X and Y direction; see the corresponding layout for further details. With a 5-axis motor, the dimension in Y increases to 1680mm (66"), for motor JQX or 1720mm (67½") for motor KS/KT max. Width of the loadable plate for horizontal drilling, electric spindle only oriented vertically, no central reference stops Installation data I.M.S. I.U. Installed power 23 - 28.5 KVA Electrical standard specifications 400 Voltage 50 Hz 3 phases Air consumption 450 Nl/min Compressed air consumption 4500 m³/h 2650 CFM Extraction air velocity 30 m/sec Extraction nozzle diameter 250 mm 9.8 Inches Noise level VSA * LAV * Drilling 72.2 74.6 Milling 74.3 80.7 Reference standard EN ISO 11202:1995* VSA = unloaded and without extraction * LAV = in operation with extraction Structure of the base body: The CNC machining center can be equipped flexibly with different milling units as well as multi-spindle drilling heads and many other units, up to dowel drilling units. In order to meet all requirements in the field of wood and plastic processing, as well as the demands of the users, each machine can be equipped with 3, 4 or 5 machining axes. The selection of drilling units extends to up to 34 drilling spindles with an integrated groove saw for the back panel groove or rabbet machining. The possibility of using this high-quality CNC machining center both as a cantilever table machine and with an aluminum grid table underscores the flexible range of applications and the performance of the M100 and M200 series. Powerful drilling heads, with individually selectable drilling spindles, max. RPM 8,000, and implemented in . technology, "the most robust drilling spindles on the market", with more than 1,000 maintenance-free application hours (lubrication interval of the drilling spindles). The possibility of being able to replace the drilling spindles within a very short time, "even without a technician", through the technology, without disassembling the drilling gear, sets a benchmark in the industry and is already standard on your machining center. Imagine your CNC machine performing hinge drilling in just one drilling operation (option), instead of the usual 3. An option that underscores our claim to offer you robust and high-performance units on our machines. Ideally and flexibly equipped for a wide variety of requirements. Whether manual or automatic, the FLEX cantilever work table allows vacuum cups and mechanical clamping elements, such as pneumatic clamps for window or curtain wall constructions (option), to be quickly, safely and cost-effectively adjusted to any material and clamping requirements, making your day-to-day work easier. Differently sized vacuum cups and clamping elements, which were developed in close cooperation with customers and users, are available as an option. Dcedpfszvhkyox Aptel

Condition: used, machine/vehicle number: 005449, Position 1: Panel Tipper MORBIDELLI-FLEXA 912+FLEXA 902 Dcjdjwucl Eepfx Aptel Position 2: CNC for Flexible Drilling MORBIDELLI-FLEXA 912+FLEXA 902 Position 3: Automatic Dowelling Machine MORBIDELLI-FLEXA 912+FLEXA 902

Condition: used, machine/vehicle number: 005446, X axis working area: 3000 mm Y axis working area: 1300 mm Dcedpfjwuciqox Aptsl Number of controlled axes: 3 axes Total number of drilling spindles: 112

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Working area X: 3110 mm Working area Y: 1620 mm Working area Z: 180 mm Dcodpjzltgrefx Aptsl 3-axis electro-spindle, 9.5 kW Vertical drilling bits: 13 Horizontal drilling bits X: 6 Horizontal drilling bits Y: 4 Grooving blade in X direction 14-position tool changer on the machine side Approximately 14-position tool changer on the machine side Work table with 6 rows of supports Laser positioning device for suction cups with Maestro CNC and Xilog Plus Panel Mac Touchscreen operator console SCM eye-M PRO-SPACE safety system 1 vacuum pump, 90 m3/h Weight approx. 3800 kg Includes door mortising unit Available June 2027