Used Motorized Decoiler for sale (23,261)

Condition: new, Year of construction: 2025, Single band console decoiler RAZ-ENO 1250/2 - Loading capacity 2.000 kg Itjdpfjxd Rgmex Aanor - Inner φ 480-530 mm - with 4 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, number of straightening rollers: 9, product height (max.): 3 mm, straightening roller diameter: 30 mm, working width: 400 mm, coil inner diameter: 360 mm, coil outer diameter: 1,700 mm, workpiece weight (max.): 2,000 kg, Straightening machine with double decoiler and loop Itedpsxiyx Nsfx Aanjr

Condition: used, Strip Processing Line, Decoiler and Straightening Machine Year of manufacture: 1991 Ijdpsif Sg Sofx Aanetr Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Very well equipped with feed-in aids Required floor space for the entire line (L x W): approx. 7000 x 3000 mm Total weight: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rolls: 7 Straightening roll diameter: Ø 40 mm Number of pinch rolls: 2 Pinch roll diameter: Ø 80 mm Entry height/pass-through height: 1500 mm - Straightening rolls hardened, ground and hard-chromed, with central support - Pinch rolls hardened, ground and hard-chromed, with hydraulic lifting - Manual straightening roll adjustment - Feed assist with hydraulically extendable tongue and hydraulically adjustable deflection pulley - Adjustable side strip guides - All straightening rolls driven via distribution gearbox and cardan shafts - Both pinch rolls driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightener opening stroke 250 mm for cleaning or for processing thicker material, lifting by trapezoidal-thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Outer coil diameter: max. 1600 mm (with load carriage) Outer coil diameter: max. 2000 mm (without load carriage) Diameter of coil turntable: Ø 1700 mm Coil inner diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Expansion jaw width: 750 mm Height of decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic overrun brake on the decoiler drum (TWINFLEX) - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic pressure arm with hydraulically driven double pendulum roller - Coil loading carriage with 12-ton lifting capacity and 300 mm stroke - Decoiler on elevated travel frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Power Unit (adjacent) Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2x REXROTH tandem pumps - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Electrical Cabinet (adjacent) - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, Coil weight: 150kg Iodeh T Ducepfx Aanstr Strip witdh: max. 100mm Outer diameter: max. 1.200mm Inner diameter: 320 ... 520mm Performance • decoiler fixed on moveable frame • Disc on back side and ring on front side for lateral coil keeping • manual adjustable brake

Year of construction: 1971, condition: good (used), decoiler - expansion mandrel with coil lifting table Iodpfjd Ha E Sox Aanjtr strip width: 1.200 mm strip thickness: 0,3 - 5 mm coil weight: 10 t mandrel Ø: 508 mm

Condition: good (used), Year of construction: 1999, machine/vehicle number: 121841, Offer 25317 Technical data: Itsdpfxjxc Ei Hj Aaner - Max. working width: 2020 mm - Max. material thickness: 3 mm - Strokes per minute: up to 32 1/min - Cutting angle: 2.0° - Motorized backgauge: 5 - 500 mm - Front material chute - Rear area safety guard - Extendable front material support - Electric foot pedal - Single stroke or continuous stroke selectable - Drive: 400 V / 4 kW - Required space: approx. W 2450 x H 1180 x D 2300 mm - Weight: approx. 1300 kg

Condition: new, Year of construction: 2025, Single band decoiler 1.250 mm - Loading capacity up to 4.000 kg Iedpfx Aasxd Rgaonetr - Inner φ 480-530 mm - with 5 clamping arms, ball bearings and with disc brakes - max coil width: 1.250 mm

Condition: used, Decoiler and recoiler for coil material HMS Type BA 1.5-06/80 Machine no. Year of manufacture: 1991 Coil weight max. 8000 kg Coil outside diameter max. 1600 mm (with coil car) Coil outside diameter max. 2000 mm (without coil car) Diameter of coil support disc Ø 1700 mm Coil inner diameter, expansion range: 460-520 mm Coil width, nominal width max. 630 mm Width of expansion jaws: 750 mm Height of mandrel above base plate: 1500 mm - Mandrel driven by hydraulic motor with gearbox and gearwheel - Pneumatic overrun brake on mandrel TWINFLEX - Hydraulic service brake - Hydraulic stop brake - Hydraulic expansion of the mandrel, centrally via wedge slider system - Hydraulic pressing arm with hydraulically driven double pivot roller Ijdpfxshx R Ete Aanotr - Coil car with 12 ton lifting capacity and 300 mm lift - Decoiler on above-floor traveling frame with powered cross-travel drive - Hydraulic unit installed externally (was also used for other functions on a strip processing line) - Without electrical control cabinet (there is a control cabinet which supplied the entire strip processing line) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Net weight approx. 5 tons Good condition – not electrically operational

Condition: good (used), Year of construction: 2009, functionality: fully functional, number of straightening rollers: 7, coil weight: 4,000 kg, coil outer diameter: 1,500 mm, number of feed rollers: 2, straightening roller diameter: 80 mm, coil width: 600 mm, 1. Decoiler Type: MS 4000 Coil weight: max. 4.000 kg Strip width: max. 600 mm Outer diameter: max. 1.500 mm Inner diameter: 475 – 535 mm Execution: • Hydraulic expansion Itodpfxoq A Tw Re Aanor • Hydraulic pressure arm from top with hydraulic driven roll Rolle • Lateral swivel in roll on front side, disc at back side and additional 3 pc. single arms for coil keeping • Mandrel driven by electric motor, control by light sensor • Decoiler moveable for loading by hydraulic • Coil loading table 2. Straightening maschine Type: MR 58 Strip width: max. 600mm Stock thickness: 0,8 – 3,6 mm at rigidity 400 N/mm2 Straightening rolls: 7 pc., supported Pulling rolls: 2 pc. Diameter of rolls: 80 mm Speed: 5 – 30 m/min Execution: • Hardened and ground rollers • Pneumatically lifted feed roller • Straightening rollers adjustable as a block • Lateral strip guiding at infeed, manually adjustable via hand crank • Hydraulic strip insertion aid (support table, extendable tongue and pressure roller from above) • Straightening head can be opened (alligator mouth) • Ultrasonic sensor for loop control • Swivel control panel • Siemens S7-200 control system

Year of construction: 1967, condition: good (used), strip width: 300 - 1.250 mm strip thickness: 0,5 - 3 mm coil weight: 6 t Itjdpfx Aaod Ha E Isnsr mandrel Ø: 508/610 mm

Condition: used, Year of construction: 2011, machine/vehicle number: 300195, Lg.no. 24215 Technical data: - max. working width 3040 mm - max. material thickness 4 mm - Manual cutting angle adjustment - stroke rate up to 34 1/min - backgauge with positioning control Pos100 - table height approx. 850 mm - front angle fence - 2 front support arms - Back gauge with light barrier - E- foot switch - Pneumatic connection 6 bar - Drive 400 V Itjdjtpnldjpfx Aaner - Space requirement without support arms approx. W 4000 x H 1400 x D 2100 mm - Weight approx. 4700 kg

Condition: used, Decoiler, pivoting decoiler GSW SCHWABE Type LHD 50/800 Sond Double decoiler, double mandrel decoiler Factory No.: 5775 Year of manufacture: approx. 1995 Coil weight: 50 kg per side Coil width: max. 130 mm Coil inner diameter: 155 - 445 mm Coil outer diameter: 850 mm Support discs: Ø 850 mm Start rings: Ø 850 mm Iodpshubgwsfx Aanstr Distance from center of mandrel shaft to base: 980 mm - Manual 180° rotatable decoiler assembly with locking positions - Central expansion via rotation lever adjustment - Mechanical disc brake, adjustable brake shoes with knurled screw Required space (L x W x H): 1000 x 850 x 1500 mm Weight: 190 kg Good condition

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Iedpfetgvgpex Aanstr Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Year of construction: 1980, condition: used, strip width: max. 2.000 mm strip thickness: 0,4 - 4 mm coil weight: 20 t cone Ø: 300 - 1.000 mm Itedpfx Aaockanpsnor

Condition: good (used), Year of construction: 2002, machine/vehicle number: C3-0203, Offer 24508 Technical data: - Load capacity 100 kg - Faceplate diameter 500 mm - Through opening 155 mm - Faceplate manually infinitely tiltable left + right - Rotation infinitely adjustable by motor - Right + left rotation - Electric foot switch for start - stop - Table height in horizontal position approx. 940 mm Itedpovtn A Ujfx Aanor - 3 jaw chuck - Drive 220 V - Space requirement approx. W 750 x H 940 x D 750 mm - Weight approx. 100 kg

Year of construction: 1994, condition: used, decoiler - expansion mandrel with coil lifter strip width: max. 650 mm strip thickness: max. 3 mm Iedjbh S Dpjpfx Aanstr coil weight: 2 t mandrel Ø: 406/508/610 mm

Condition: good (used), Year of construction: 2025, machine/vehicle number: 9010003, Offer 24195 Technical Specifications Iedpjv Tx Hdsfx Aanstr - Max. working width 2050 mm - Max. sheet thickness at 400 N/mm² without pre-bending: 4 mm - Roller diameter 115 mm - Drive 400 V / 4.5 kW - Handheld remote control - Space required approx. W 2800 x H 1250 x D 1150 mm - Weight approx. 2200 kg

Year of construction: 1975, condition: good (used), strip width: 200 - 1.650 mm strip thickness: 0,6 - 3 mm Itodpfod Ha E Ajx Aansr coil weight: 7,5 t mandrel Ø: 508/610 mm

Condition: good (used), Year of construction: 2000, Offer 24510 Technical data: - max. load capacity with horizontal table top 500 kg - Flat plate diameter 850 mm - Through hole / hollow shaft 200 mm - Faceplate motorized left + right swivel 0 - 90 ° - Rotation infinitely variable approx. 0.06 - 2.4 1/min - Right + left rotation - E. foot switch for faceplate rotation - E. foot switch for swiveling face plate left + right - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 850 mm - Space requirement approx. W 1450 x H 850 x D 1000 mm - Weight approx. 900 kg Itsdpfx Aasvfc Suonor - 4 jaw chucks

Year of construction: 1988, condition: used, decoiler - expansion mandrel with coil lifter Bandbreite: max. 400 mm Banddicke: 0,3 - 4 mm Coilgewicht: 4 t Dorn-Ø: 508 mm Itedpfx Asbh S Hksansr

Condition: good (used), Year of construction: 1970, machine/vehicle number: 30740, Offer 23465 Technical data: - max. working width 1040 mm - max. material thickness (at 40 kg strength) 3.5 mm - Table width 300 mm - stand projection 100 mm - working height 880 mm - Front angle stop - 3 additional front support arms - Back fence manually adjustable 5 - 550 mm - Drive 400 V / 5.5 kW - E. foot switch - Space requirement including back gauge, without front support arms Iodjrci T Eepfx Aanjtr - approx. W 1500 x H 1250 x D 1400 mm - Weight approx. 1400 kg

Year of construction: 1977, condition: used, strip width: max. 800 mm coil weight: 12 t Itodpjbh Sz Sjfx Aansr mandrel Ø: 450 mm

Condition: good (used), Year of construction: 1975, machine/vehicle number: D 201238, Offer 17230 Technical data: - Load capacity 3600 kg - Faceplate diameter approx. 1050 x 1050 mm - Faceplate motorized, swiveling + rotating - Faceplate speed electrically infinitely adjustable 0.2 - 1 rpm - Motorized right + left rotation - Hand remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg Isdpfx Asv Hbzkjanetr - Hand remote control

Year of construction: 1968, condition: used, strip width: max. 500 (650) mm strip thickness: 0,4 - 8 mm coil weight: 13 t Isdjbh S Dyopfx Aanotr mandrel Ø: 508 mm

Year of construction: 1975, condition: used, strip width: max. 450 mm strip thickness: 0,2 - 4 mm Iedpfx Aaobh S E Eonjtr coil weight: 5 t mandrel Ø: 406/508 mm