Used Mounting Plate for sale (20,366)

Condition: excellent (used), MDS Type: MDS A220-PD MDS A220-PD Autoriv manual workstation A220-PD assembly system is a stationary manual workstation for processing press-fit elements. Intended use: The machine is used to press in fasteners. The worker inserts the corresponding screws, plastic nuts and the component to be and the component to be processed into the machine by hand. The operator then starts the pressing process using a foot switch. The pressing process runs automatically. Fasteners: Press-in nut, rivet nut, self-piercing nut, press-in stud, punching stud / rivet stud Thread size - M5, M6, M8, M10, M12 Technical data: Control voltage 230V/10A Connector plug HAN 10, not wired Temperature ranges: Transport: - 20°C to + 60°C Operation: + 10°C to + 40°C Storage: - 20°C to + 50°C Compressed air connection: Operating pressure: 6 bar Quality: Conditioned, water-free and and unlubricated air Connection: 1⁄2" connection thread Machine dimensions: Length (L): approx. 824 mm / Height (H): approx. 1800 mm / Width (W): approx. 600 mm Values apply to a working height (AH) of 1000 mm. Pneumatics: Standard: Manufacturer SMC Variant: Manufacturer FESTO Control system: Standard: Manufacturer B & R Variant: Manufacturer Siemens Machine type C-frame A220-PD Continuous sound pressure level (LpA) 78 dB Operating modes: The operating modes can be changed in the control panel. Automatic mode: The fasteners are pressed in automatically. Movements are only triggered when the operator presses the foot pedal and triggers the pressing process. Manual mode: In manual mode, adjustments are made to the machine. Kodpfx Adotgik Rjbsnd In this operating mode, movements can be activated individually. Weight: Approx. 600 kg Condition: Used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2018, condition: used, Serial number: 1302xxxx Please contact ATS Norway for more information Kedpfjvgzv Iex Adbsnd Please provide reference number upon request: 19196 Description: Ammann 538 kg vibrating plate for sale. It has stood for less than a year since it was new and not used at all. Everything must work as it should Ready for delivery.

Condition: excellent (used), Guillotine shears Amada GPX 630 made in France Manufacturer: Amada Type: GPX 630 Condition: used cutting length max: 3050mm normal steel: 6,35 mm Kedpexwmumefx Adbond NC backgauge: 1000mm number of hold-downs: 16 housing dimensions: 3750 x 2000 x 1850 mm weight: ~ 6500kg Scope of delivery: guillotine shear Amada GPX 630

Condition: excellent (used), Year of construction: 1994, High-performance crank guillotine shears Fab. Fasti Typ. 507 - 1040 x 4mm year 1994 Technical data Make FASTI Type 507 - 10/4 Year of construction 1994 Sheet width 1040 mm Sheet thickness 4.00 mm (aluminum 6mm, VA 2mm) Cutting angle: 1.5° Stroke rate 50 strokes/min Table height: 800 mm Drive power 400 V / 7.5 kW Space requirement: approx. 1.8 x 2.4 x 1.5 m Weight: approx. 2000kg Equipment Knjdpfx Astuv N Njdbjd - Controlled back gauge 10 - 600 mm - Angle fence with scale 750mm - 1 additional support arm - Manual cutting gap adjustment !!! - Pneumatic sheet holding device - documentation All information without guarantee. A demonstration is possible at any time in our exhibition hall.

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, straightening plate, marking plate, test plate, control plate, precision measuring table Kodpfx Adjw Hz Rksbend -Clamping plate: with support ribs -Clamping surface: 2010 x 4010 mm -Plate thickness: 55 mm -Plate: with support ribs -Number: 1 piece clamping plates available -Price: per piece -Dimensions each: 2010/4010/H350 mm -Weight: 6100 kg/pc.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Amada Hydraulic Guillotine Shear Type GX II 630 Working width: 3050 mm Knedpoxwmycefx Adbod Max. sheet thickness: 6.35 mm Robust CNC electro-hydraulic guillotine shear AMADA CNC touch control, located front left ("GP 37W2") Machine control system including information display Main display with 4 operating panels Control/operation of all machine functions Up to 50 cutting programs, each with up to 15 sequences CNC electromechanical backgauge Travel speed: 100 mm/sec CNC electro-hydraulic cutting angle adjustment CNC electro-hydraulic blade gap adjustment Sight device & cutting line illumination for viewing the scribe line Shearing according to optical scribe mark Manually adjustable table support plates including ball rollers Grip recesses in the front support table 2x movable foot switches Operating manual and circuit diagrams included

Condition: new, Year of construction: 2025, For customers only from the Baltic countries: Lithuania, Latvia, Estonia. Kjdpfx Adowd Ebzjbjnd The CIDAN RAPIDO guillotine is a fast and reliable metal cutting machine. Depending on the length of the processed metal, guillotines of different working lengths are offered: 1300 mm / 2600 mm / 3200 mm / 4100 mm. Cutting thickness: 3.5 - 1.5 mm. The guillotine can perform up to 35 cuts per minute. The drive system with eccentrics, the lowering bars for holding the cut sheet and the system that presses the material during cutting are installed only 2.5 cm from the knives, which allows you to easily, quickly and conveniently cut narrow strips. RAPIDO guillotine shears have corner supports on both sides of the table, ensuring that the material is fed into the machine at a right angle, and LED cutting zone lighting, thanks to which you will clearly see the cutting line. Backrest and control system CUTLINK CUTLINK is a fast, reliable and easy-to-use program that allows you to simultaneously enter up to 10 different operations. The backrest automatically adjusts itself according to the entered parameters. As standard, the guillotine is equipped with a 750 mm deep backrest, but if necessary, a 1000 mm backrest can be selected as an option. Sheet support and return To achieve maximum control, the back sheet support is pneumatically controlled. This allows you to adjust the sheet feed speed depending on the type of material being processed. After cutting, the sheet support lowers the material into the return carriage (forward return). If necessary, the sheet return function can also be selected as an option. If you have any further questions, we will always be happy to consult you by phone or invite you to inspect the machine live.

Condition: used, Year of construction: 2001, total length: 3,400 mm, total width: 1,060 mm, total height: 1,230 mm, Empty weight: 2.000 kg Price: On request - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 904201006 - Max. sheet thickness: 6mm - Top roll diameter: 160mm - Max. working width: 2050mm - Drive: raulisch - Number of rolls: 3 - Bottom roll diameter: 160mm - Control: Conventional - Transport dimensions: 3400mm x 1060mm x 1230mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Kedpoxwm R Uofx Adbsnd VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. Knjdpjxwmugofx Adbsd guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle 2° Knedpfeu Utaijx Adbod Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip - Angle fence - Extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, Year of construction: 2024, neu 2024 9722 prompt, Zwischenverkauf v Türkei 16600 € 318.72 € 1 2050 mm 3 mm 130 mm 3,5 m/min 2.2 kW 3200 mm 750 mm 1000 mm 1500 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor HARDENED ROLLS manual Back Roll forward tiltable upper roll forward and reverse revs conical bending by tilt of backroll movable control panel users manual in GERMAN OPTIONS: (time of delivery with options approx. 8 weeks) Knedpfx Adswiqpbjbjd Motorised Back Roll (Power Rear Roll) Digital Read-Out

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, Haco hydraulic guillotine shear type TS 406 working width 4050 mm maximum sheet thickness 6 mm motorised back gauge cutting gap adjustment cutting angle adjustment Knodpfx Asxwmv Dedbed

Condition: used, Year of construction: 2001, Electric guillotine R.A.S with mechanical rear support, fully operational, available for testing. Specification: Model: R.A.S 52.30 Year: 2001 Manufactured in: Germany Working length: 3 100 mm Shearing thickness max: 2.0 mm Rear support: mechanical 770 mm Weight: 1950 kg Other: forward sheet metal drop. If you have any further questions, we will be happy to answer them. Kjdottv Ecspfx Adbend

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Knedpfoxu Nc Isx Adbjd Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg

Condition: good (used), Year of construction: 2001, Bending length: 4000 mm Bending strength: 45 mm Anbiegung (kalt) / Pre-bending (cold): 38 mm Antriebsleistung / Drive power: 100 kW Anzahl Walzen / Number of rollers: 4 Ksdpfxoxyf Tte Adbond Adjustable rollers / Adjustable rollers: 3 Verstellungsart der Walzen / Adjustment type of rolls: hydraulisch Oberwalzendurchmesser / Top roll diameter: 710 mm Unterwalzendurchmesser / Bottom roll diameter: 640 mm Seitdwalzendurchmesser / Side roll diameter: 520 mm Arbeitsgeschwindigkeit / Working speed: 2+4 m/min (up to 8m/min) Gewicht Maschine (mit Walze) / Weight of machine (with roller): 78 t Zusatzausrüstung / Additional equipment: Elektronischer Gleichlauf / Electronic synchronization Luftgekühlter Öl-Kühler / Air-cooled oil cooler Obere Stützvorrichtung / Upper support device Seitliche Zylinderabstützvorrichtung (10t) / Lateral cylinder support device (10t) Infeed table (20t) / Infeed table (20t) hydr. Bladder accumulator / hydr. bladder accumulator Konusbiegenvorrichtung / Cone bending device

Condition: used, Year of construction: 2019, • Type: Assembly System for Rubber Bearings • Model: AMG HAT X290 Hybrid + E-Class (Station 314) • Year of Manufacture: 2019 • Power Supply: 400 V / 50 Hz • Control Voltage: 24 V • Power Rating: 22 kVA • Control System: Siemens SIMATIC HMI with touchscreen interface • Integrated Lubrication System: microjet GmbH Minimal Quantity Lubrication System • Included Equipment: – Complete control and drive system – Various hydraulic and mechanical joining units – Tooling and fixture sets for different bearing types Knodjxufqbspfx Adbed – Pneumatic control unit with multiple valve blocks – Worktable and component storage rack

Condition: new, Year of construction: 2025, Cutting length 3200 mm Kodpowiipmofx Adbjnd Cutting height 1600 mm Motor output 1,3 kW Dimensions (L/W/H) 4000x1500x2000 mm machine weight ab. 350 kg

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 2004424193, total length: 6,620 mm, Drive-independent measuring system Positioning accuracy +/-0.1 mm per meter Voltage 230 V, 1~, 50/60 Hz Knjdpfexxl Rpsx Adbsd Pneumatic locking in position Stop and measuring system with automatic cutting length adjustment and positioning control E 255 For precise cutting of aluminum profiles For connection to all single-blade saws (right) Stop flap can be lifted for loading profiles Patented rail and carriage system

Condition: new, Year of construction: 2025, Schnittbereich quadratisch (B x H): 2600 x 100 mm Kedexlcauopfx Adbsnd Kürzeste Länge des abgeschnittenen Stücks : 1100 x 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Electrical connected load: 41 kW Leistung des Sägemotors: 30 kW Leistung hydraulischer Motor: 7,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20-100 rpm Saw feed speed: 1-700 mm / min Höhe der Materialauflage: 720 mm Sägeblattdurchmesser: 425 mm Sägeblattbohrung: 50 mm Sägeblattdicke: 2,7 mm Length: 12000 mm Breite inkl. Späneförderer : 6300 mm Height: 3000 mm Weight of machine approx.: 28000 kg Standard configuration Variable blade speed controlled by inverterPrecision feed pressure & feed rate dual valve systemServo feeding motor with precision ball screwCombined guides with bearingsOil mist cooling de anti-vibration deviceP.L.C. control for all electric and hydraulic raulic pump with three-phase motorTwo sets of horizontal and vertical clamping devicesAdjustment baseRoller table

Condition: good (used), functionality: fully functional, Year of construction: 1993, Sheet width: 3100 mm Sheet thickness: 6 mm Stroke: 160 mm Back gauge: 1000 mm Total power: 5.5 kW Knedpfxexu Nb Dj Adbjd Machine weight approx.: 6,500 kg

Condition: good (used), Year of construction: 1983, travel distance X-axis: 6,000 mm, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross-section: 530 x 550 mm Table load: 20 t Knjdpfx Adoxyfihjbod Plate field size: 16800 x 5500 mm Tool holder: SK 60 Approx. machine weight: 173 t Additional information: - Additional equipment: large and small angular head - Offer number: 22979 - Table is the S20 MP model, table size: 2200 x 2500 mm - Machining width on the machine X-axis (X-Way): 6000 mm - Including 6 plates, each 5600 mm x 1850 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6000x1150x2980 mm Knodsvz Eukopfx Adbjd Weight 800 kg Total power requirement 3 kw

Condition: good (used), Year of construction: 1987, travel distance X-axis: 11,500 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 2,000 mm, x-travel 11,500 mm y-travel 4,500 mm w-axis 1,600 mm z-axis 2,000 mm Spindle diameter 200 mm Rotary table 3,000 x 4,000 mm Knsdpfx Aoxyfgtjdbed Bed length of rotary table 4,600 mm Tool holder SK50 Workpiece weight on rotary table 80 t Total power requirement 83 kW Additional information incl. 15 plates

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 5000x1150x2980 mm Weight 665 kg Total power requirement 3 kw Kjdpfx Adovz Eudjbond

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 6530x1150x2980 mm Weight 900 kg Total power requirement 3 kw Kjdpfx Adsvz Eg Hobond