Used Mounting Plate for sale (20,370)

Condition: used, Further plates in stock, here number 1: Width x Depth x Thickness = 770 x 580 x 90 mm Kedjxx U S Njpfx Adbjnd Hole = 131 mm and 200 x 300 mm and number 2: Width x Depth x Thickness = 800 x 600 x 60 mm Hole = 150 mm and number 3: Width x Depth x Thickness = 650 x 500 x 60 mm Hole = 120 mm and number 4: Width x Depth x Thickness = 550 x 440 x 80 mm Hole = 195 x 150 mm and number 5: Width x Depth x Thickness = 315 x 320 x 40 mm Hole = 95 mm

Condition: new, Year of construction: 2025, Extremely strong industrial magnet for iron separation Special price 970 € net (shipping 14,90 € net) *the lengths can be seen in picture 2 The active side has a stainless steel end plate (material 1.4301). There are threaded holes on the back for mounting *handle available on request The block magnet systems can be used up to a maximum operating temperature of + 100 °C. The magnet surface should be regularly cleaned of any trapped iron parts. Starting heights for all types e.g. Kedotqfhxepfx Adbsnd For a steel nut M5 approx. 60 mm For an M5 x 30 screw approx. 100 mm Installation example 1: Mounted above a conveyor belt, the iron parts "jump to the holding surface of the magnet". Installation example 2: Mounted in a piping system with direct contact to the material flow. For a high level of separation safety, it is possible to install several block magnets in a cascade, one behind the other. Installation and safety instructions: When handling, unpacking and then installing, make sure that there are no loose iron parts such as tools or screws in the vicinity. The magnetic attraction is so strong that painful injuries can occur if fingers come between iron parts and the active surface. There should be no steel parts within a minimum distance of 400 mm below the active surface.

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Clamping area panel field 8000 x 2100 mm Ksdpfxjfbt Huj Adbend - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: used, comprising: 1 plate loader A-1 SCREEN, model: MA-L8900, year of manufacture: 2015, serial no.: 82155, weight: 1,160 kg; 1 platesetter SCREEN model: Plate Rite HD 8900S/PT R8900, year of manufacture: 2015, serial no.: 623, weight: 1,151 kg, plates imaged: approx. 738,000; 1 temperature control unit REXXAM RCU-500, year of manufacture: 2015, serial no.: 50642A; 1 control computer SCREEN EP-B101, year of manufacture: 2015, serial no.: 2022; 1 air-transport cart APTT 480, year of manufacture: 2022; 1 conveyor unit ADVAND MDT480, type plate not available; 1 printing plate processor GLUNZ & JENSEN, model: Quartz IV 125, year of manufacture: 2015, serial no.: 94367-0606, water already drained. Kodpfoxuvdfsx Adbjnd

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 68700 € 1298.43 € 3100 mm 13 mm 8 mm Kjdpfowir D Hjx Adbond 50 mm 13 1/min 1.75 ° 16 37 to 1000 mm 200 mm/s 30 kW 330 l 2 Stk. 840 mm 600 mm 3550 mm 4280 mm 2300 mm 3600 mm 2350 mm 12500 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength for economic processing Lower blade fourfold turnable Upper blade double turnable Oilfilling Light barrier on the back of the machine Qualified customer support User manual in GERMAN and ENGLISH according to CE rules (sample photo) WE HAVE MORE THAN 850 REFERENCES!

Condition: like new (used), Year of construction: 2013, cutting length 1060 mm cutting angle 2 ° no. of strokes 50 Hub/min engine output 4,0 kW weight of the machine ca. 0,67 t Motorised guillotine shears type 165.03 Technical data: Working width (cutting length): 1060 mm Max. sheet thickness to be cut: 2.5 mm at 400 N/mm² Machine stroke rate approx.: 50/min Knsdjua Iulspfx Adbod Cutting angle: 2° Opening width hold-down device: 5 mm Factory setting cutting gap 0.1 mm - Digital display for backgauge - Front table support - Operating instructions available

Condition: used, Year of construction: 1989, sheet width 3100 mm plate thickness 6,35 mm distance between columns 3150 mm cutting angle 0,5-2,5 ° no. of strokes 12-50 Hub/min Control 85 ELGO total power requirement 9,5 kW weight of the machine ca. 5,5 t Knedpfoxu Nr Asx Adbjd dimensions of the machine ca. 4,1 x 1,8 x 1,8 m Machine has a ELGO type 85 control for back gauge and the cutting data.

Condition: used, table length 1000 mm table width 660 mm table height 870 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Kjdsu Sbf Dopfx Adbend

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box Kedexun Atepfx Adbond -Clamping cube: Angle adjustable 90° -Groove width: 28 mm -Groove spacing: 150 mm -Dimensions: see photos / technical drawing -Dimensions: 1000/800/H630 mm -Weight: 871 kg

Condition: good (used), functionality: fully functional, fuel type: gasoline, Wacker BVPN 50 vibratory plate in good condition, ready for immediate use. Weight approx. 70 kg Plate size approx. 600 mm x 470 mm With original Wacker service documents Knsdpfx Aexyd Atodbed Please do not send email inquiries. For any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone arrangement. Subject to change, prior sale, and errors. We are a member of the German Association of Independent Motor Vehicle Dealers (BVfK) and carry the BVfK quality seal!

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 51600 € 975.24 € 3080 mm 6 mm 4 mm 350 mm 20 1/min 0,5 - 2 ° Kjdpjwirwtjfx Adbond 16 20 to 1000 mm 200 mm/s 11 kW 125 l 3 Stk. 820 mm 494 mm 3280 mm 4100 mm 2050 mm 3650 mm 1950 mm 7980 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 3 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH

Condition: ready for operation (used), Year of construction: 1978, Available immediately from location: LVD Hydraulic Guillotine Shear Type MVS 62/4 Year of manufacture 1978 Cutting length 6200 mm Knedoxxu E Ajpfx Adbod Material thickness 4.0 mm Digital backgauge 750 mm Drive 12.5 kW Weight 7500 kg Price: €5,500 plus VAT, ex location

Condition: used, Year of construction: 1997, sheet width 0610 mm plate thickness 1,5 mm distance between columns 650 mm front stop - adjustable 0- 300 mm angle stop 45-90 Grad operating pressure 6 bar strokes per minute 60 total power requirement 3 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 1 x 1 x 1,5 m Ksdpfxsxu Nrpj Adbsnd

Condition: used, floor-plate length 1050 mm Kjdpfx Asu Sbfkedbend floor-plate width 1050 mm floor-plate height 60 mm weight of the machine ca. 0,2 t dimensions of the machine ca. 1050x1050x0,1 m table plate of PFSU 1600, Ø 1050 mm

Condition: good (used), Clamping bracket, T-slot plate, clamping table, clamping cube, clamping plate, clamping tower, clamping box -Clamping cube: heavy version -Length: 350 mm Kodpfxexugrao Adbend -Material: Steel -Dimensions: see photo -Dimensions: 350/250/H200 mm -Weight: 62.3 kg/pc.

Condition: good (used), Technical data: maximum cutting width: 2550 mm maximum cutting capacity steel 400 N/mm2: 13.0 mm adjustable rip fence: 1000 mm adjustable kerf adjustment adjustable cutting angle adjustment working height: 940 mm Ksdpfx Adsvbrcbebsnd Dimensions (length x width x height): approx. 3700 x 2800 x 1950 mm Weight: approx. 9.6 tons The seller is not liable for typing or data transmission errors. The machine's appearance, technology and wear correspond to its age; used machines are sold without any warranty.

Condition: used, length / mm Knjdpfx Adsxukvvsbsd width / mm height / mm

Year of construction: 1991, condition: ready for operation (used), Available immediately from location: Technoimpex hydraulic guillotine shear Type HS 5 / 2550 Year of manufacture 1991 Cutting length 2550 mm Material thickness 5 mm Digital backgauge 1000 mm Drive 5.5 kW Knedpfxjxxuukj Adbed Weight 4 tons Price: EUR 4,500 plus VAT, ex location

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, number of rollers: 4, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, Akyapak 4 – Roll Initial Pinch Bending Rolls Year: 2012 Model: AHS 25/16 Capacity: 2600 x 20mm Rolling 2600 x 16mm Initial Pinch Programme control Top Roll: 330mm dia. Bottom Roll: 300m dia. Knsdpfoxwzbzsx Adbsd Side Rolls: 240mm dia. Bending Speed: 0 – 3.5 metres / minute Motor: 11 kw Dimensions: 5385 x 1840 x 1611mm high Weight: 10 570 kgs

Condition: used, functionality: fully functional, total width: 128 mm, total length: 260 mm, total height: 50 mm, overall weight: 12 kg, Magnetic clamping plate Eclipse Clamping surface: 260 x 128 mm Height: 50 mm Knedsxvy Auopfx Adbsd Weight: 11.60 kg

Condition: used, Cast angle plate Knjdoxx Ttrspfx Adbed Height: 2000 mm Width: 1000 mm Depth: 860 mm T-slots dimensions: 34 x 26 mm Weight: 2,3 T

Year of construction: 1994, condition: ready for operation (used), A hydraulic plate shear BBM is available. Working width: 4000mm, max. material thickness: 4mm. An on site inspection is possible. Ksdpfx Ajxxa Tfedbjnd

Condition: used, First registration: 05/03/2021, vehicle identification number WMA41SZZ5MY424800, engine capacity 12,419 cc, power output 375 kW, diesel, mileage: approx. 195,000 km Knjdpoxua R Asfx Adbjd

Year of construction: 1998, condition: ready for operation (used), Immediately available ex-stock: Hydraulic guillotine shear Hera Model TK 3000 / 10 Year of manufacture 1998, very few operating hours (like new condition) Motorized backgauge Backgauge travel 1000 mm (CNC controlled) Knedpfx Adexxutyobod Machine control: Siemens Simatic CP 7 Cutting length 3050 mm Material thickness up to 10 mm Drive power 15 kW Weight 8 t Offered at €13,500 plus VAT ex-location.

Condition: used, Year of construction: 2022, FIN: WH72HPA10AN201634, permissible gross weight: 20,000 kg Knjdpfxexua Une Adbsd