Used Small Punching Press for sale (16,378)

Condition: new, Trumpf style press brake tooling/punch 28 degree R3mm H195mm Max. 100t/m Gjdpfx Ajtw U Ezspweka L500mm&L550mm sectionalized

Year of construction: 2026, condition: new, Messan P07 - Pneumatic press for hole punching in reinforcement sheet iron Gkedjzugwcepfx Apwja - Working system - pneumatic - Opens holes for handle and lock holes - Punching molds are changeable - Maximum thickness of the sheet iron 1.50 mm - Option - special mould for different forms

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Gkjdpfxozulx Es Apwoa Capacity 30 ton Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Gsdpfxev Tp D He Apwoka Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 17,000 h, Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Manufacturer: Trumpf Type: TruMatic 6000 FMC -1300 Year of manufacture: 2006 Condition: used Operating hours NC hours: 70,305 h Beam-on hours: 17,217 h Control: Siemens Sinumerik 840 D Punching force: 220 kN Laser power: 2700 W Working area, laser operation approx.: 2585 x 1280 mm Working area, punching operation approx.: 2585 x 1370 mm Max. sheet thickness approx.: 8 mm Support table, brush tables CE marking Standard equipment: Stable, easily accessible C-frame Coordinate drive with integrated linear magazine, 21 positions for tools and clamping elements 1 clamping element Maintenance-free three-phase servo motors Part eject chute 500 x 500 mm (sensor-monitored) HI-LAS high-pressure cutting TRUMPF Laser: CO2 laser TLF 2700 High-frequency excitation Laser control TASC 3 Cutting head: Laser cutting head 5″ Laser cutting head 7.5″ Quick-change device Cutting gas pressure setting programmable Distance control DIAS ContourLas Punching head: Hydraulic mono-tool holder, 360° rotation Programmable stripper Tool spray lubrication Punch slug extraction Control: Sinumerik 840D 10.4″ TFT color display Teleservice Automatic shutdown 3.5″ floppy disk drive RJ45 network connection MDE interface Safety: Multi-beam light barriers Rapid shutdown, hydraulics Compact dust extraction system Options: Automatic shutdown Threading former Softpunch Adaptive stroke calibration Follow-up cylinder Individually opening clamps Chip conveyor with container Multishear Gsdpfjxwmuaox Apweka Multitool Control Brush tables Automation SheetMaster (parallel loading and unloading) Scissor lift table Chip conveyor with container TrumaGripMaster TrumaSortmaster R4 TwinCarts (unloading) Spreader magnet Rotor scanner (unloading monitoring) Autolas Plus Remaining grid pallet 2500x1250mm

Condition: excellent (used), functionality: fully functional, overall weight: 8,000 kg, Equipment: documentation/manual, emergency stop, The machine is in working order. Gksdpfxezrxdie Apwea

Condition: used, Heavy-duty hydraulic hole-press, perforated panel press or gluing press for gluing or securing workpieces such as frames, panels, windows or doors. Technical data: - Cylinders: 6 Gksdpfx Apjzryy Sewsa - Hold-down units: 3 - Pressing area: 260 x 145 cm

Condition: excellent (used), Capacity: 2.5 tons Year of manufacture: 2017 Operating pressure: 150 bar Weight: 1100 kg Dimensions: 1800 × 1800 × 2200 mm Transport wheels included Gkodpfx Apsw U Aurjwoa Tools not included in delivery

Condition: used, Year of construction: 2003, Manufacturer: Haulick + Roos GmbH Type: RVD 3000-2500 Machine Type: High-performance stamping press Year of manufacture: 2003 Condition: used Rated pressing force: 3,000 kN Pressing force: 300 t Stroke frequency: 20–180 strokes/min Drive power: 80 kW Ram stroke: 20–160 mm Ram adjustment: 150 mm Tool installation height: max. 450 mm Maximum tool length: 2,500 mm Maximum tool width: 1,000 mm Table area: 2,450 × 1,000 mm Ram area: 2,500 × 950 mm Clamp plate opening: 2,250 × 350 mm Machine weight: approx. 46,000 kg Strip feed direction: right to left Gjdpfx Aozrz Dxjpwska Power supply: 400 V Frequency: 50 Hz Maximum connected load: 80 kVA Maximum fuse rating: 250 A Draw cushion: not available Components of the system: Haulick + Roos high-performance stamping press RVD 3000-2500 DIMECO coil unwinder, type 23S1/D/VV Year of manufacture: 2003 Weight: 1,450 kg Maximum load capacity: 4,000 kg DIMECO roller feed, type 1681/17/BVV Year of manufacture: 2003 Weight: 540 kg ARKU straightening machine Technical data for roller feed: Strip width: 5–420 mm Strip thickness: 0.1–5 mm Maximum strip cross-section: 1,000 mm² Strip speed: up to 125 m/min Feed length: 0.1–999.9 mm Feed accuracy: ±0.1 mm Roller diameter: 100 mm Strip height adjustment: 100 mm, manual mechanical Note: The ram guide should be replaced. The system is currently still in operation and functional. A quote from the manufacturer for complete disassembly and installation of new guides is available for approximately €200,000. We will gladly provide videos of the system in operation upon request.

Condition: good (used), Pressing force: 25 t Cutting capacity: thickness / width: 1.25 / 140 mm Gkjdpfsfim Dwsx Apwea Number of strokes per minute: min./max.: 250 strokes/min. Ram stroke - max.: 20 mm Usable table area: WxL: 440 x 360 mm

Condition: good (used), Table size: 350 x 350 mm. Gedpfx Asfm A Amepwjka

Condition: new, Year of construction: 2026, neu 2026 090237 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm Gkodjwirmbepfx Apwoa 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,-

Condition: used, Pressure: 30t Strokes per minute: 120-600 Stroke: 40mm Up table size: 250x500mm Down table size: 600x600mm & 400x320mm Between Columns Technical characteristics: *AUTOFEED LENGTH 80mm, WIDTH 320mm *AIRCLUTCH Power: 7,5kw DIMENSIONS: Height: 2600mm Gjdo Dvk Aspfx Apweka Width: 1800mm Length: 1200mm Weight: 3800kgr New electric systems

Year of construction: 2016, condition: ready for operation (used), Pressing force: 800kN, max. tool installation height: 380mm, max. upper tool weight: 300kg, stroke adjustment: 8mm-140mm, ram height adjustment: 100mm, stroke rate: 100/min, throat depth: 350mm, table dimensions X/Y: 850mm/670mm, ram area: 550mm/400mm. Machine dimensions X/Y/Z: approx. 2250mm/1550mm/2750mm, weight: approx. 9000kg. The machine was completely overhauled by the manufacturer in 2016 (retrofit). In 2024, the clutch, rotary union, press safety valve, and hydraulic oil cooler were replaced. In 2021, the drive motor and belt for the flywheel were converted to frequency-controlled speed. Documentation available. An on-site inspection is possible. Godpfx Apexq Exwswjka

Year of construction: 2007, condition: ready for operation (used), Offered is a Kocher + Beck rotary die cutter/rotary die cutting system, sheet die cutting machine approx. year 2007. Sheet format X/Y approx. 500mm/720mm, material thickness up to max. 0.5mm, die cutting width max. 540mm, unwind max. 732mm, axial adjustment of the magnetic cylinder: +/-7.5mm, machine dimensions X/Y/Z: approx. 2100mm/1150mm/1500mm, weight: approx. 450kg. Inspection possible by arrangement. Gkjdpfxoxy R E Uo Apwea

Condition: used, Year of construction: 2003, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2003 Pressing force: 6,300 kN Stroke rate: 10-45 strokes/min Stroke length: 600 mm Ram adjustment: 200 mm Gkedpfezui Idox Apwea Table area: 4,000 x 1,700 mm Installation height: 1,100 mm Includes PBK conveyor system.

Condition: used, Year of construction: 2017, Schuler BEUTLER Press Type: MC 4000 Year of manufacture: 2017 Press force: 4,000 kN Stroke rate: 20-80 strokes/min Stroke adjustment: 40-315 mm Ram adjustment: 200 mm Die height: 750 mm Table area: 3,000 x 1,400 mm Gsdpfx Apozui Haewska Press weight: 72,000 kg Strip feeding system consisting of: GSW Schwabe, Type: MHR 5/2000, Year of manufacture: 2017 GSW Schwabe, Type: RMA 50/78, Year of manufacture: 2017

Condition: good (used), functionality: fully functional, Weight: 3.5 tons Punching force: 1000 kN Reach: 760 mm Can punch, for example, a 40 mm hole in 22 mm steel Gjdpfx Apsztknpeweka Drive power: 8.5 kW Height (approx.): 2.15 m Width x Depth (approx.): 0.8 x 2 m Stroke release via foot switch.

Condition: excellent (used), A robust machine designed for punching holes in steel, aluminum, and other metals. Thanks to its foot control, it provides convenient and safe operation. Its compact design makes it suitable for both a locksmith's workshop and a production facility. Godpozkmi Djfx Apwoka Technical specifications: Manufacturer: Mubea (Muhr und Bender) Model: KL30 Year of manufacture: 1975 Machine number: 38601 Country of manufacture: Germany (West Germany) Power supply: 3× 220/380 V Frequency: 50 Hz Motor power: 1.5 kW Rated current: 5.8 / 3.4 A Protection rating: IP44 Control: foot pedal Punching capacity: Ø 30 mm in sheet metal with a thickness of 8 mm Ø 20 mm in sheet metal with a thickness of 12 mm (Parameters correspond to the manufacturer's nameplate for a material with a strength of approximately 45 kp/mm².) Condition: Used machine. Visual condition matches the photos. Robust, heavy-duty industrial design. Ideal for locksmith workshops, steel structure production, and workshops involved in metalworking.

Condition: good (used), pressure 100 t punching cross-cut in cmm 40.0 in 22.0 mm ST stroke 120 mm column arm 760 mm total power requirement 8.5 kW weight of the machine ca. ca. 3.800 kg dimensions of the machine ca. ca. 2500 x 1700 x 2000 mm Original price, including stop system: approx. 45.000 euros Special price available upon request Features: - Robust / heavy-duty hydraulic hole punch - Punch stroke continuously adjustable Gkedpozn Ahksfx Apwsa - NC stop system "MUBEA MATIC 82" * Travel range in X and Y axes * With "FAGOR" control unit * Includes large support table * Separate control cabinet - Various (custom) punching tools (see Figure 9) - Front safety guard, including sheet metal scraper - 1 freely movable foot switch - Operating instructions for machine and stop system

Condition: ready for operation (used), pressure 30.0 t punching cross-cut in cmm 30.0 in 9.0 mm stroke ca. 35 Hub/min throat 610 mm stroke - stepless adjustable 0 - 28.0 mm oil volume 35.0 l work height max. 1010 mm total power requirement 4.0 kW weight of the machine ca. 1200 kg. Features: - Electro-hydraulic punch press with long reach - Material/sheet metal scraper - Very large material support table (!) * with adjustable depth stops - Continuously variable stroke adjustment - Freely movable foot switch, including protective cover - Side storage shelf - Assortment of punches and dies Gkedeznng Sopfx Apwoa - Original operating instructions

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_4, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Godpfx Apozlhmysweka Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: new, Year of construction: 2026, machine/vehicle number: TO5_3, functionality: fully functional, operating hours: 1 h, power: 3 kW (4.08 HP), stroke length: 250 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, overall weight: 375 kg, controller manufacturer: CoastOne, controller model: Touchscreen 15", working width: 350 mm, bending force (max.): 5 t, warranty duration: 36 months, control type: CNC control, degree of automation: manual, back gauge adjustment: CNC-controlled, number of axes: 2, type of crowning: manual, actuation type: electric, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, upper tooling, Small electric table-top press brake with spindle drive TableOne 5 - CoastOne Made in Finland Pressing force: 5T Bending length: 350mm Spindles: 1 x 5T Control: TC15-2D graphic Backgauge: 1-axis controlled X-axis - R-axis manual Gkodpfx Aezlhd Espwja Tool holder: Type A / R1 / ES Style / AMADA Promecam 1 set of bending tools included 36-month warranty after installation Delivery extra; available immediately Visit under power possible anytime by appointment!

Condition: used, Year of construction: 1980, pressure 25 t no. of strokes 1500 Hub/min total power requirement 20 kW Gsdpfx Apovu E Iqswska

Condition: used, Year of construction: 1987, pressure 40 t Gjdpfxovu E Iwj Apwjka no. of strokes 500 Hub/min total power requirement 5,5 kW