Used Punching Press for sale (27,917)

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 1,000 h, machine/vehicle number: GRM80E, control type: CNC control, degree of automation: automatic, actuation type: mechanical, controller manufacturer: Otto Bihler, controller model: Otto Bihler, punching force: 30 t, stroke rate (min.): 99 1/min, stroke rate (max.): 120 1/min, sheet thickness (max.): 5 mm, sheet thickness steel (max.): 5 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 5 mm, sheet thickness brass (max.): 5 mm, sheet thickness copper (max.): 5 mm, overall weight: 1,500 kg, Equipment: centralized greasing system, emergency stop, We Sanjit Moulds Private Limited have a Bihler Machine GRM80E. Its a wonderful machine with Multiple Slides. We have maintained the machine properly. The price mentioned is CIF Hamburg. This machine is located in India in Nashik which is very 180 Kms from Mumbai. Rcjdpfx Aajxc Txceboh

Condition: used, functionality: fully functional, Year of construction: 2004, operating hours: 26,426 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, punching force: 20 t, The punching machine is in good condition and has always been serviced on time by certified Amada service representatives. All documentation is included. The drum encoder was recently replaced. The machine is sold complete with software and tools. The punching machine is connected and can be tested on site. Rcodew E Emaopfx Aabeh Specification: Year: 2004.07 Made in: France Operating hours: 26,426 Power-on hours: 65,006 Control unit: AMADA AMNC-F Punching force: 20 tons Stations: 45 Tools: sold with tooling Software: Linea 5 / Combi 5 (Only works with Windows XP) Sheet length: 2,500 mm Sheet width: 1,270 mm Sheet thickness: 3.2 mm Sheet repositioning: 5,000 mm Workpiece weight: 150 kg Dimensions: L 6080 x W 5120 x H 2318 mm Weight: 16,500 kg Location: Lithuania Test possible: Yes If you have further questions, we will be happy to answer them.

Condition: used, Punching Machine MUHR & BENDER - MUBEA Model KL 350 / 203 Machine No. KL3509864 Year of manufacture: 1998 Punching force: 35 tons Throat depth: 200 mm Ram stroke: 22 mm Capacity: Ø 28 mm in 10 mm sheet (at 450 N/mm²) Rcodpfxoxf Utas Aabsh Ø 23 mm in 12 mm sheet (at 450 N/mm²) Ram plate: 265 x 70 mm Ram plate thickness: 25 mm outside / 50 mm in the center Table plate: 285 x 250 mm, thickness 40 mm Table cutout: 115 x 85 mm Drop-through opening in table cutout: 115 x 25 mm Installation height: 125 mm (with table and ram plate) Number of strokes: single stroke via foot switch Motor power: 1.5 kW Power supply: 400 Volt, 50 Hz - Electric foot switch for stroke activation - Manual lever search device for punch movement - Special tool as punching tool Space required (L x W x H): 800 x 800 x 400 mm Weight without tool: 340 kg Weight with tool: 370 kg Good condition

Condition: used, Year of construction: 1980, control panel Boschert Stanze Year 1990 +++++ Please note: Rsdpfx Aeh D Aqgoabjch The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), controller manufacturer: Bosch Trumagraph, empty load weight: 16,800 kg, enlarged Y-travel of 1600 mm! tools all indexed Punching pressure: 250 kN Max sheet thickness by punching + nibbling: 6.4 mm Rcsdpfxsxqh Syo Aabeh Max punching dia: 76,2 mm Max weight workpiece: 200 kg Working range on cross-side (X-axes): 2500 mm Working range along (Y-axes): 1600 mm Toolchanger: yes Number of toolpositioners: 10x

Year of construction: 2005, condition: excellent (used), pneumatic punching machine Redpfxjff Apws Aabjch

Condition: ready for operation (used), Punching machine, hole punch, blanking press, eccentric press, Used machine Manufacturer: Haulick + Roos Werkzeugmaschinen GmbH, Pforzheim, Germany Type: RVD 32-540 HS Serial number: 1201847 Year of manufacture: 1985 Pressing force: 320 kN (≈ 32 tons) Redpfxjxdxbxj Aabjch Stroke rate (speed range): 30 – 1200 strokes/min Drive (motor power): ~18 kW Stroke length: 0 – 40 mm Ram adjustment: 0 – 50 mm Centre hole in ram: Ø 52 mm This is a high-speed eccentric press (HS = High Speed), suitable for pressing thin sheet metal in mass production, for example in the electronics or automotive industries for small components.

Condition: good (used), Year of construction: 1998, Neat used punching machine from Euromac Type CX 1000 30 Capacity 30 ton Rcjdpfxoxld R Ie Aabsh Unloading 1000mm Overwrap up to 10000mm Including drawer cabinet with lots of tooling and multitool

Condition: used, Hydr. differential stroke press, toggle lever hydraulic press, automatic punching press BRUDERER - LEINHAAS type AR 11-100.H Fine blanking press, knuckle-joint press Machine. No. P247 Year of construction 1991 Redpfx Aaegp T Euoboch Pressing force 100 ton (1000 kN) Installation height max. 380 mm Table surface 1100 x 700 mm Outlet hole 800 x 220 mm ram surface 690 x 315 mm Frame width 1150 mm Lateral upright width 410 mm Stroke rate 45 and 80 strokes/min. Clamping pin bore Ø 50 mm Compressed air requirement 8-10 bar Hydraulic tank capacity approx. 700 liters Motor power main drive 22 kW Mains connection 400 Volt, 50 Hz, 28 kW - 2 speed settings for the number of strokes (45 and 80 strokes/min.) - electronic cam controller BALLUFF, type Minicontroller BMC4K - electronic tool monitoring EBERLE, type PLS 509S - KISTLER press force monitoring system - table surface with 22 mm T-slots and ram surface with 14 mm T-slots - Electronic stroke counter - motorized height adjustment for the ram - central oil lubrication - Work area shielding through pneumatic opening protective screen - adjacent control cabinet and electrical cabinet - 2 oil coolers with FLUTEC cooling fan (oil-air cooling) - Electrical circuit diagram and printout of PLC program available - Two-hand operation on the machine Space requirement (control cabinet) L x W x H 700 x 700 x 2100 mm ( approx. Space requirement (electrical cabinet) L x W x H 1700 x 650 x 2100 mm Space requirement (press) L x W x H 2350 x 1700 x 3300 mm Weight of the press 8500 kg Very good condition

Condition: excellent (used), Machine type: Eccentric press / high-speed punch press. Nominal pressing force: 62–63 t. Rjdpfxoxm S E No Aabech Stroke frequency: 65–110 strokes/min. Application (original): production line for L-type staples (length 4–50 mm) Condition: used, operational / in use; ready for testing by arrangement Availability: immediately available.

Condition: good (used), Pressure: 25 t cutting capacity: thickness / width: 1,25/ 140 mm Strokes per minute: min./max.:250 strokes/min. ram stroke - max.: 20 mm Rcodpfx Aajfim Dwsbsh Table surface usable: WxD: 440 x 360 mm

Condition: ready for operation (used), Met elektrische achteraanslag Ponscapaciteit: 70 ton Dia x plaatdikte: Ø 28 x 20 mm Maximale slag: 80 mm 40 str / min Keeldiepte: 300 mm Werkhoogte: 1065 mm Maximale snijdikte in plaat: 20 mm Bladlengte: 455 mm Rcodpfxjxgv E To Aabsh 90°-snede: 130 x 130 x 13 mm 45°-snede: 90 x 90 x 10 mm Op maat gesneden rond/vierkant: 45 mm Elektromotor (vermogen): 7,5 kW Lengte: 1800 mm Diepte: 1200 mm Hoogte: 2000 mm Gewicht: 1650 kg

Condition: new, neu 090142 prompt, Zwischenverkauf v Polen 7950 € 153.44 € 1 47 to 110 mm 27 mm 25x18 mm 8 s 16 mm 700 bar 479 mm 135 mm 388 mm 117 kg MOBILE HYDRAULICS-POWERSTATION Double action - fully automated process of punching and return Wide range of hole diameters up to 27mm Intelligent control system with inching and automatic load detection Mode indicator light Protection against accidental start-up OPTIONAL: Gantry punching station for increased productivity and operation comfort € 710,- Rcsdewirmbopfx Aaboh

Condition: used, ROVETTA Transfer Press Type: S4-15000-5500x2500 Press force: 1,500 t Strokes: 8–24 spm Stroke length: 763 mm Slide adjustment: 400 mm Shut height: 1,200 mm Table area: 5,500 x 2,500 mm Rsdpfx Aaexnxlfsbsch Slide area: 5,500 x 2,500 mm Opening between uprights, lateral: 3,400 x 1,900 mm

Condition: used, Single-column hydraulic press HIDROLIKSAN model C-Type 100 Serial no. C100UT16/16 Year of manufacture: 2016 Pressing force: 100 tons Ram stroke: 400 mm Throat depth: 400 mm Daylight (installation height): 495 mm Table size: 900 x 700 mm Ram area: 900 x 700 mm Max. tool weight: 500 kg Rodpfoxf Uqrox Aaboch Table height above floor: 1,000 mm Max. hydraulic operating pressure: 240 bar Hydraulic tank capacity: 180 liters Rapid approach speed: 30 to 100 mm/sec Pressing speed: 3 to 10 mm/sec Return speed: approx. 100 mm/sec Drive power: 11 kW Power supply: 400 V, 50 Hz - Table and ram with 18 mm T-slots - Operation via two-hand control console or manual control - SIEMENS S7 1200 control with Simatic HMI touch panel - SICK Flexi Soft safety control - SICK light curtain as reach-in protection in safety mode - Programmable ram stroke, pressing force, and stroke speed via control - Pressure and position shut-off - Pressure holding time infinitely programmable - Ram equipped with direct linear measuring system - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Approx. 2,496 operating hours - UVV safety for manual loading, last inspection October 2024 Required installation space (L x W x H): 2,300 x 1,700 x 2,750 mm Weight: 8 tons Very good condition

Condition: used, Year of construction: 1990, Technical details: Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t Hydraulic automatic punching press for precision work (high-speed press) - for punching, drawing, pressing, minting, bending, riveting, straightening, assembling - with hydraulic gripper feed type HS 150 and 7-roller straightener (moving) - Normal strips of approx. 0.4mm - 2.5mm thickness x approx. 160mm width, as well as narrow strips up to approx. 4mm can be processed. Feed length can be adjusted as required via the control unit. - with ram round column guide - with automatic central lubrication - High-speed: up to 400 strokes min-1 - motorized adjustable fixed stop (bottom can be adjusted by hand/motorized) - Operating modes such as continuous stroke and/or single stroke Equipment: - 1x hydraulic unit - 2x control cabinets Rsdpfx Asu Icxqjabsch *

Condition: good (used), table size: 350x350mm Rcodpfx Aaofm A Amjbjh

Condition: used, Year of construction: 2001, Combined punching machine with shear and automatic loading/unloading system – FINN-POWER SG + TRS6FB _____ Brand: FINN-POWER Model: SG + TRS6FB Year of manufacture: 2001 Rsdpfxow Iflms Aabech Machine weight: 22,000 kg Punching force: 300 kN Shearing force: 250 kN Max. working pressure: 300 bar Description: CNC combination punching machine + corner shear, complete with: • automatic loading system with sheet metal storage • CNC rotary turret • integrated corner shear • conveyor belts for unloading • soundproof cabin and safety guards • dedicated Finn-Power CNC The machine is currently installed and can be inspected by appointment. Condition: • Immediately available 📍 Location: Italy _____

Condition: ready for operation (used), - invoersysteem voor plat- en hoekstaal - met toevoerwagen en materiaalklem - Vacon 110 software CNC-besturing Hydraulische schaar voor vlak staal VPS 2200 cap: 220 ton maximale lengte: 15 200 mm breedte/dikte: 500/25 mm hoek: +/- 45° Hydraulische hoekschaar voor staal VHS 2400 cap: 240 ton maximale lengte: 15 200 mm 200 x 200 mm / 16 mm Rsdjwlkw Djpfx Aabech Hydraulisch ponsen VPO 1000 cap: 100 ton ponsdiameter/dikte: 57/15 mm of 32/25 mm 4 ponsunits voor vlak staal (Verticale positie) 1 ponseenheid voor hoekstaal (horizontale positie) incl. gereedschap Hydraulische teller VNI 1/36 1 codeerschijf 36 tekens tekenhoogte x diepte: 10 x 1 mm Hydraulisch aggregaat VHA 37 37 kW - 250 bar

Condition: excellent (used), Year of construction: 2006, Kaiser Press KSTU 500-30-75 RK Press force: 500 tons Stroke adjustment: 50-250 mm Ram adjustment: 200 mm Rcsdpfx Asxnxk Ioabsh Strokes per minute: 20-80 1/min Max. installation height: 700 mm Table area: 2,500 x 1,400 mm Ram area: 2,500 x 1,250 mm Feeder Andritz Kaiser Max. strip width: 800 mm Max. strip thickness: 5.0 mm Straightening machine FECKER Max. strip width: 800 mm Max. strip thickness: 6.0 mm Decoiler FECKER Strip width: 800 mm Load capacity: 8,000 kg

Condition: used, Single column eccentric press KRUPP type PEKRD 125 h Machine No. 2861 Year of construction 1977 pressure force 125 ton. throat 400 mm table size 950 x 750 mm ram area 800 x 540 mm table opening 100 x 250 mm stroke adjustment 8 to 160 mm ram adjustment 100 mm Installation height of largest stroke at top max. 550 mm Stroke rate 60 strokes/min. Table height above floor 800 mm Motor power 10 kW Mains connection 380 Volt, 50 Hz - Hydraulic overload in ram - Compressed air clutch-brake combination ORTLINGHAUS - ram weight balancing cylinder Rcedpfsdzqddex Aaboh - motorized ram adjustment - Table plate with ball rollers - Two-hand operation - grease central lubrication HELIOS - stroke counter - UVV 7n 5.1 §4a, paragraph 2 No. 3b for manual insertion work Space requirement L x W x H 2300 x 1800 x 3200 mm weight approx. 10 ton. good condition (very little used)

Condition: used, Technical details: punching cross section in mm²: 45 kp/mm² table-size: 120x100 mm throat: 80 mm weight of the machine ca.: 15 kg space requirements of the machine approx.: 0,3x0,2x0,95 m Punching Press Rcsdpsu Icw Hofx Aabeh *

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min Rodpfx Aajvu E I Djbsch total power requirement 20 kW

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Rcedpfx Aov Tp D Hsabeh Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition

Condition: used, Pneumatic Single-Column Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Air-Powered Press Serial No. 3437 Year of manufacture: approx. 1990 Press force: 3.0 tons at 6 bar Press force: 2.6 tons at 5 bar Press force: 2.2 tons at 4 bar Press force: 1.6 tons at 3 bar Press force: 1.0 ton at 2 bar Throat depth: 150 mm Rcedpfxjw A Srws Aaboh Power stroke: 6 mm Pre-stroke: 50 mm Total stroke: 56 mm Ram surface: Ø 100 mm Tool mount: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical power amplifier (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Required space (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit