Used Multi Spindle Lathe for sale (19,203)

Condition: good (used), Multi-spindle head, multi-spindle drilling head, drilling gearbox -Manufacturer: Perske, multi-spindle drill head with drive -Drill head: 18 spindles -Drill bit spacing: 32 mm -Stroke: 50 mm -Drive: DSB 1306/2 1.8 kW 2800 rpm -Collets: Ø10 mm -Quantity: 2 pieces available Price: per piece -Overall dimensions: 800/200/H575 mm Bjdpfxsvmw H As Andoww -Weight: 67 kg/unit

Condition: used, Max. turning length: approx. 800 mm, center height: approx. 150 mm, hollow spindle diameter: approx. 50 mm, with 3-axis digital display, manufacturer: ELESTA, type: VISULESTAIIE, with Multifix steel tool holder, magnetic chuck, coolant system, splash guard, and machine light, as well as various machine accessories. Bsdpfx Ansz Nhpbjdoww

Condition: good (used), Centre height: 290 mm Centre distance: 3000 mm Swing diameter over bed: 580 mm Swing diameter over cross slide: approx. 400 mm Spindle bore: 63 mm Spindle mount DIN 55027: Size 8 Speed range: 25 – 1120 rpm Bed width: 365 mm Bwsdpsxtu Ersfx Andow Longitudinal feed: 0.03 – 1.3 mm/rev Cross feed: 0.008 – 0.33 mm/rev 80 metric threads: 0.25 – 76 mm 96 Whitworth threads: ½” – 152 tpi 52 module threads: 0.25 – 22 module 88 diametral pitch threads: 1 – 176 DP Tailstock taper: MK 4 Drive power: 5.5 kW Dimensions (L x W x H): 4450 x 1300 x 1350 mm Weight: 2800 kg Accessories / Special Features: • Quick-change tool post, brand "Multifix", size B • Hardened bedways • Bed stop Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, Weiler Primus guide and spindle lathe from the training workshop!!! Technical data: >> Year of manufacture approx. 1985 Machine no. 1191 >> Center height 120 mm >> Center width 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle passage 23 mm >> Short taper spindle head KK4 DIN 55027 >> Tailstock MK 2 >> Feed rates from 0.03 to 0.15 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: Bodpfxjvtp Eds Andoww >> 1 x three-jaw chuck 125 mm with 2 sets of jaws >> Collet device with Collets 18 pieces >> Mulifix size A with 3 steel holders >> Stop >> Electric spindle protection About the machine: A Weiler Primus guide and pull spindle lathe is offered in very good condition. The machine is of course fully functional. The slides all run very smoothly and evenly. The Weiler runs quietly even at high speeds. The Primus was in a training workshop. This new generation of Weiler lathes is very user-friendly and surfaces can be produced as if they were ground. Take the opportunity to view this machine on site with power on and see for yourself its condition.

Condition: used, functionality: fully functional, Weiler Matador VS-2 guide and feed spindle lathe Technical data: Bwjdpfevv Etvex Andjw >> Year of manufacture approx. 1970 Machine no. M1012 >> Center height 140 mm >> Center width 500 mm >> Speed: 30 – 3550 rpm >> Spindle passage 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feed rates from 0.010 to 1.184 mm / rev >> Possible threads metric, inch, module and diametric pitch >> Metric thread pitches from 0.25 to 15 mm >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> Collet device 32 collets (set is not complete) with holder >> 1 three-jaw chuck 1 set of jaws >> 1 four-jaw chuck 1 set of jaws >> Mulifix size A with 2 steel holders >> Change gears >> Bed stop About the machine: A used Weiler Matador VS-2 is offered in a fully functional condition. Take the opportunity to view this machine on site under power and see for yourself its condition.

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Bodpfxez Agzqs Andjww Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ EQUIPMENT Collets Tool holders Additional accessories

Condition: good (used), Year of construction: 1998, functionality: fully functional, number of spindles: 35, Multi-spindle drilling machine (dowelling machine), model from the Vitap Alfa 35 series. [1, 2] Bwodpfx Anez Ef R Todsw This type of machine is used in the furniture industry for precise linear drilling of holes for dowels (axes), shelves, connecting elements, and fittings in wooden panels (chipboard, MDF, solid wood). [1] The main features of the machine in the image: Drilling head with 35 spindles: The long, green support arm (drilling spindle) has 35 parallel spindles with a distance of 32 mm between them (standard system for furniture). The drill bits alternate in a left-hand

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Bwjdpfx Aez Agz Djndew Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Bsdpfjygw Svsx Andjww

Condition: excellent (used), CATALOGUE NUMBER 8005 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 870x560 mm - Height to table surface: 900 mm - Feed cylinder stroke: 65 mm - Vertical/horizontal and angled drilling adjustment - Drilling unit adjustment, pneumatic - Main motor: 1.5 kW - Dimensions (L/W/H): 1000x1150x1240 mm - Weight: 370 kg Bodpfx Anjzr U Ecjdsww ADVANTAGES - For 21 spindles – drill bit mounting with quick-release couplings - Vertical, horizontal and angled drilling - Unpainted - Used drilling machine, very good condition Net price: 7900 PLN Net price: 1840 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Y: 100mm, travel Z1/Z2: 700mm/702mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8400kg, control: Fanuc 31i-B, operating hours: 1565h, spindle hours: 506h. Includes transformer, chip conveyor, filter system, and cooling unit. The cabin door window is broken. Documentation available. An on-site inspection is possible. Bjdpfx Ajxaphnsndjww

Year of construction: 2023, condition: ready for operation (used), Turning length: 705mm, turning diameter: 230mm, travel X1/X2: 165mm/195mm, travel Z1/Z2: 700mm/720mm, bar passage: 51mm, speed: 6000rpm, tool positions: 2x12. Machine dimensions X/Y/Z: approx. 5100mm/2200mm/2500mm, weight: approx. 8200kg, control: Fanuc 31i-B, operating hours: 1407h, spindle hours: 343h. Includes transformer and chip conveyor. Documentation available. An on-site inspection is possible. Bjdexaphuepfx Andoww

Condition: used, Year of construction: 1996, functionality: fully functional, turning diameter: 710 mm, turning length: 3,000 mm, Universal lathe Bjdpfxjxxm A Ho Andjww FAT Poland Model: TUR 710 x 3000 Year of manufacture: 1996 Accessories: Digital readout 3-jaw chuck Tool holder Steadies Live centre

Condition: used, Year of construction: 2009, Used Machine Year of manufacture: 2009 Condition: Overhauled by a Hirzt specialist Description: The machine’s design is very simple. The workpiece is loaded into the machine. A quickly adjustable stop with pneumatic locking centers the workpiece in the machine. After a foot switch is activated, the workpiece is pneumatically clamped and automatically fed to the drilling unit (30 m/min). The vertical spindles drill from below, so that the resulting chips do not remain on the workpiece, as they would in a machining center. The horizontal spindles operate on two sides of the workpiece. The workpiece can be of any length, as it is guided to the drilling unit (= X-axis). The drilling spindles can be freely programmed individually or in groups and move along the Y-axis. The drilling depth and the horizontal drills are controlled by the Z-axis. After all holes have been drilled, the workpiece is conveyed back to the infeed side or, if desired, to the outfeed side. Bwedpfozwg Tiox Andew While in conventional machining centers the workpiece is clamped using a vacuum and the vacuum clamps must be adjusted to the workpiece size, this step is completely eliminated with the 3-axis-controlled point-to-point drilling machine. Advantages: - High machining speed - Good value for money - Compact footprint All drilling operations can be performed in a very small space: - Row drilling - Structural holes - Hardware holes - Cabinet joint holes Features: - Welded machine frame - Drilling head with 7 vertical drilling spindles and 1 horizontal double drilling spindle - 3-axis control: - X: NC-controlled plate feed via “overlapping” pneumatic clamping jaws - Y: NC-controlled drill head movement - Z: NC-controlled drilling spindle depth adjustment - TRK precision guides - Pneumatic split pressure beam above the drilling unit - Pneumatic roller hold-down devices in the feed area - Pneumatic clamping jaws for transport - Pneumatically lockable side stop with rollers - Control via Windows XP-based PC (1 GB flash memory) - 8?? color screen - Alphanumeric multifunction keyboard including mouse - Network card - USB interface Technical Specifications: - Number of controlled axes: 3 - Maximum panel width: 1,000 mm - Maximum drilling width: 800 mm - Maximum feed rate (X-axis): 30 m/min - Drill speed: 3,400 rpm - Maximum drill bit diameter: 35 mm - Maximum total drill bit length: 70 mm - Drill bit chuck: 10 mm shank with clamping surface - Power rating: 2.5 kW - Exhaust port diameter: 100 mm - Required pressure: 6 bar - Working height: 900 mm - Fold-out roller support on the feed side, 500 x 750 mm Dimensions: 1,650 x 1,920 mm Availability: available shortly Location: North Rhine-Westphalia

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Bwodpfxsyln Ekj Andew

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine is undergoing a comprehensive partial overhaul in our workshop, so it is in excellent technical and visual condition. All guides are in working order, the gears run quietly, and the levers shift easily. You are welcome to visit us to see the condition for yourself. Availability: upon request Center height: 160mm Center distance: 650mm Spindle bore: Ø 40mm Tailstock taper mount: MT3 Quill stroke: 85mm Longitudinal slide feed range: 0.020 - 0.630 mm/rev Cross slide feed range: 0.006 - 0.200 mm/rev Possible thread types: Metric, inch, module, diametrical pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Other equipment and accessories: NEW 3-axis digital readout, coolant system, chuck guard, guide rail & Pulley cover, 2 emergency stops, operating instructions, and much more upon request... Our service promise to you: - We are a certified master mechanical engineering company - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - Upon request, we can fully or partially overhaul your selected machine - Upon request, we can repaint your selected machine in your desired color - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or delivery Bwodpfjwhzdmsx Andjw

Condition: used, Multi-spindle head, drilling beam, multi-spindle drilling head, articulated multi-spindle head, row drilling machine, dowel drilling head, dowel drilling machine, drilling gear -comes from an Alberti drilling rig -max.: 18x drill -Admission: -alternately turning right/left -Distance drill: 50 mm Bwsdpfxjcp Txpe Andsw -Distance drill: 25 mm -Number: 2x drilling heads available (1x left/1x right) -Price: per piece -Dimensions: 1090/380/H580 mm -Weight: 210 kg/piece

Condition: used, Year of construction: 1979, functionality: fully functional, turning diameter: 640 mm, center height: 320 mm, turning length: 2,000 mm, Leadscrew and feedshaft lathe VDF with digital readout, powered top slide, 3-axis feed with rapid traverse, 3-jaw chuck, faceplate, Multifix toolholder with 5 inserts. Bodpfx Asxz Edzondeww

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Bsdpfx Asx Dzxajndoww Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: excellent (used), functionality: fully functional, number of spindles: 35 Bwjdpfxow U Aiis Andsw pneumatic head inclination

Condition: good (used), Year of construction: 1970, LZ-Lathe Fabr.SCHAERER Type:UD500 Year 1970 overhauled 1991 Bodou Rdurjpfx Andsww With Forkadt chuck 315mm tool holder Multifix size C. Center height : 250 mm Center width : 1500 mm spindle bore: 65 mm Spindle speed : 18 - 900 rpm. Machine in good condition .

Year of construction: 1995, condition: good (used), 3 drilling heads with 21 spindles each Bwodeih H Epepfx Andow 1 horizontal 21 spindles 2 vertical 21 spindles pneumatic clamps

Condition: reconditioned (used), functionality: fully functional, spindle bore: 40 mm, center height: 160 mm, center width: 650 mm, quill stroke: 85 mm, total length: 1,600 mm, total width: 900 mm, total height: 1,500 mm, Ladies and Gentlemen, We are selling a Weiler Praktikant 160B lathe with 3-axis digital readout. The machine has been extensively overhauled in our workshop so that it is technically and visually in excellent condition. All guides are in good order, the gears run quietly and the levers are easy to operate. You are welcome to visit us on site to see the condition for yourself. Availability: on request Center height: 160mm Center width: 650mm Spindle clearance: Ø 40mm Tailstock taper mount: MK3 Quill stroke: 85mm Feed range longitudinal slide: 0.020 - 0.630 mm/rev Feed range cross slide: 0.006 - 0.200mm/rev Possible thread types: Metric, inch, module, diametral pitch Metric thread pitches: 0.25 - 8mm Spindle brake: switchable Total connected load: 7.5 kvA Voltage: 400V Dimensions: approx. 1.58x0.9x1.5m (LxHxW) Weight: approx. 720kg Further equipment and accessories: 3-axis digital display, coolant device, chuck protection, jaw chuck and other accessories on request... Bwjdpfx Anju H U S Hedew Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can completely or partially overhaul your chosen machine - On request, we can repaint the selected machine in the color of your choice - On request, you can order additional accessories such as tools etc. directly with the machine - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, spindle speed (max.): 8,000 rpm, turning diameter: 18 mm, controller manufacturer: Siemens, Equipment: bar feeder, chip conveyor, TECHNICAL DETAILS Turning diameter: 18 mm (16 mm) Spindle speed: 800 - 8,000 rpm Spindle circle diameter: 180 mm Main spindle drive power: 11 kW Bwjdeyxmrqopfx Andew Torque: 18 Nm Bar feeder capacity: max. 80 mm Longitudinal slide travel: 50 mm (63 mm) Cross slide travel: 20 mm (32 mm) MACHINE DETAILS Control: Siemens Dimensions & Weight Space requirement approx.: 6.0 x 1.5 x 2.2 m Machine weight approx.: 5.5 t EQUIPMENT CO2 fire extinguishing system by Kraft&Bauer Ruez scraper belt conveyor IEMCA bar feeder PRA 52 42 F Tool package Cam package Various clamping devices Documentation Chip conveyor Coolant unit Parts discharge chute Signal lamp Interface for bar feeder Hydraulic unit

Condition: used, 4-spindle drilling head, adjustable multi-spindle drilling head, type V 604 G Factory No.: 4220 Drilling capacity per spindle: 6 mm Spindle drives: 4 units Gear ratio: 1:1 Spindle spacing (center of spindle to center of spindle, diagonally): 45 to 138 mm Bodpez Hfcljfx Andjww Drilling head spindle drive: 6 x 20 mm Centering flange on the drive: Ø 89.7 mm, 6x M8 threaded holes, bolt circle = 105 mm Tool holder: Ø 6 mm collet chucks Overall height from tool holder (bottom) to gearbox housing, outer edge (top): 218 mm - 4 spindle drives with collet chuck holders (collet chucks are not included in the scope of supply) - 4 tool spindles can be adjusted steplessly by rotating within the spindle spacing - Ideal for 4 drill holes in a square arrangement from 32 x 32 mm to 97 x 97 mm Dimensions Ø x H: 170 x 218 mm Weight: 7.7 kg Good condition