Used Multispot M8 for sale (699)

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Ndodpfjxy Tmnex Aanof

Condition: excellent (used), Year of construction: 2019, 256mm maximum cutting diameter, 458mm max turned length, 4,800rpm spindle speed, 51mm bar capacity, 12 station VDI turret, 16kW spindle motor, Nodpex D Uy Rsfx Aanedf Hurco WinMax 5 Control, tailstock, tool setter, swarf conveyor

Condition: new, The RSM 800 is a precision Conventional Cylindrical Grinder, designed by KNUTH to deliver exceptional grinding performance. Built on a rigid machine frame made of premium cast iron, the RSM series features long support guideways that enhance stability during operation. The machine is equipped with a hydraulic linear feed that offers infinitely variable micro-feeding, ensuring precise adjustments. You will appreciate the swiveling table for taper grinding, while the hydraulic adjustment of the headstock simplifies setup and workpiece exchanges, ultimately minimizing downtime. With a grinding diameter of 8 to 200 mm and a grinding length of 800 mm, this robust machine is engineered to meet diverse application needs. Additionally, it comes standard with essential equipment such as a 2-axis position indicator and internal grinding accessories. For a powerful and reliable Conventional Cylindrical Grinder, consider the RSM 800. Request a quote today and explore how this machine can enhance your grinding capabilities in the realm of Grinding Machines. Ndodencdx Ejpfx Aanef

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, 1 FPT SIRIO 8 milling machine from 1998 – CNC HEIDENHAIN TNC 430 X 8000 Z 2000 Y 1200 Rotary table 1500 x 1500 – travel 2000 Admissible weight 10 t Automatic head with 144 positions – speed 3000 rpm – 37 kW ATC with 60 positions – ISO 50 Chip conveyor Good working condition Ndodpfxjx Nh Ubs Aanef

Condition: new, pressure: 80bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 6100motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Ndodped Etfwjfx Aansf

Condition: ready for operation (used), Year of construction: 2008, operating hours: 49,673 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, ejector force: 22,000 N, ejector stroke: 100 mm, Function-tested and immediately ready for operation by service for Krauss Maffei injection moulding machines! Inspection with dry run possible at any time. TECHNICAL DETAILS Clamping force: 800 kN Screw diameter: 35 mm Tie bar spacing: 520 mm Shot volume: 154 cm³ Injection pressure: 2,429 bar Ejector force: 22,000 N Ejector stroke: 100 mm Platen length: 740 mm Platen width: 640 mm Mould mounting height: 300 mm Max. platen distance: 790 mm Tie bar dimensions (h x v): 520 x 420 mm MACHINE DETAILS Nsdoxzd Ixspfx Aanodf Dimensions & Weight Dimensions (L x W x H): 5,350 x 1,700 x 2,000 mm Total weight: 6,500 kg Supply power type: three-phase current Input frequency: 50 Hz Operating hours: 49,673 h EQUIPMENT Documentation/Manual On-screen text in German CEE socket 16A 1x air valve Material hopper Water manifold Levelling elements EUROMAP 67 interface USB interface Schuko socket 10A Tool heating 24x

Condition: ready for operation (used), Year of construction: 2004, operating hours: 90,000 h, functionality: fully functional, machine/vehicle number: 90063, clamping force: 800 kN, screw diameter: 75 mm, clearance between the columns: 1,120 mm, displacement volume: 3,756 cm³, injection weight: 3,400 g, mold height (min.): 500 mm, opening stroke: 1,250 mm, plate height: 153 mm, total length: 11,100 mm, total width: 3,200 mm, total height: 2,580 mm, overall weight: 63,000 kg, input voltage: 400 V, input current: 308 A, Equipment: documentation/manual, 2-K, double nozzle, machine without handling Ndsdpfx Aajw U A Ufjnef

Condition: reconditioned (used), shovel volume: 1.8 m³, Year of construction: 2023, operating hours: 600 h, Technical data: Machine type: Compact wheel loader Engine output: 69.8 kW / 94.9 HP Operating weight: 6,925 – 7,230 kg Tipping load, straight: 6,080 kg Emission standard: EU Stage V Bucket pivot point: 3,525 mm Standard bucket with welded-on cutting edge, approx. 1.8 cubic meters Special equipment: Nedpfxettvz Io Aanjdf Rear counterweight 190 kg Tires Michelin 460/70R24

Condition: excellent (used), Cup grinding machine Swivel arm grinding machine Make Lomefa Type Unicum 8" YEAR OF MANUFACTURE 1980 grinding wheel diameter 200 mm Motor 380 Volt 1,84 kw Separate coolant tank in the machine base Transport dimension: L.850 mm Ndodpfx Aeui S R Dsanef W.800 mm H.1650 mm Weight 350 kg

Year of construction: 1987, condition: used, sheet width 150 mm coil weight 80 kg coil external diameter 650 mm 1000 mm diameter of the mandrel 230 - 445 mm total power requirement kW Nsdpfx Aaofn Aqlensdf weight of the machine ca. t dimensions of the machine ca. m

Condition: new, cutting pressure: 85throat depth: 355stroke: 80length of knive: 482motor: 7,5heigth: 2040weight approx.: 2315 Ndedpfxsh Hrx Ee Aanof

Condition: excellent (used), Year of construction: 2001, operating hours: 4,186 h, functionality: fully functional, Doppstadt SM 818 Profi screener Weight (without attachments): 20,000 kg Capacity: 60 m³/h Drum diameter: 1,800 mm Engine power: 75 kW Screen aperture size: 100 mm Ndjdpfx Aox Dbg Doanof

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Ermak Model EKM80/150MTB universal ironworking machine., Serial number 51273-B690FC. Year 2014. PUNCHING 80-Ton punching pressure Max diameter 40mm at 14mm thickness Max thickness 24mm at 24mm diameter. Throat depth 510mm Stroke length 70mm Cycles/min at 15mm stroke 35 pieces Table size 625 x 550mm Working height to die 1200mm FLAT SHEARING Flat Bar (Max. thickness) 300 x 20mm Flat Bar (Max width) 450 x 15mm Blade Length 475mm Angle Flange Trim 80mm Working Height 1020mm ANGLE SHEARING Ndodpfx Aaevmzlcensf At 90 Degree shearing 130 x 130 x 13mm At 45 Degree miter shearing 70 x 70 x 7mm Working height 1225mm BAR SHEARING Round Bar Shearing 45mm Square Bar Shearing 45mm Working height 1355mm NOTCHING Material thickness 12mm Rectangular notching width 52mm Rectangular notching depth 52mm V notcher ( side x side x T) 52 x 52 x 12 Working height 1015mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Here we offer a very well maintained constantly serviced injection molding machine. complete maintenance by manufacturer until current Njdpfx Ajh Dr E Toanedf Injection molding machine: Manufacturer / Type: Krauss-Maffei KM80 220 C2 Serial No.: 61006272 year of construction: 2004 Control system: MC4 Clamping unit clamping force: 800 kN /80 tons tie bar distance: 405 x 405 mm Mold installation height min.: 250 mm platen distance max.: 750 mm Clamping platens standard: 610 x 610 mm ejector stroke: 150 mm core pull: 1x pcs. Injection unit Injection unit / cylinder ø30 mm Shot weight max. (ø30):: 77g/hp Injection flow: 73cm³/sec Spec. injection pressure: 2500 bar Handling interface: Euromap 12 Inking interface: Yes Dimensions & Weights Weight with control cabinet: 3,8 t Length: 3800 mm Width (machine only): 1050 mm Height: 1890 mm Oil filling: 270 L Location: Hannover / Lower Saxony The machine is very well maintained and can be inspected under power. Peripherals that may be pictured are NOT part of the offer! The machine available now in our warehouse free loaded on truck of the buyer or free to the door against freight reimbursement

Condition: excellent (used), MIKRON HPM 800 U is a 5‑axis machining center for precision, high accuracy and reliability. Table 630×440 mm, 5 T‑slots, table load 800 kg; travels X800 Y800 Z550 mm; A +91/‑121°, C 360°. HSK‑A63, spindle‑nose to table 600 mm; 115 tools, Ø max 80 mm (160 free), tool length 350 mm. Spindle 0–20000 t/min; feed 0–20000 mm/min; rapid 45 m/min; accel. 6 m/s; max feed force 6000 N; 3×400V 50Hz; 55 kW; weight ~15000 kg; size 3505×3100×2980 mm. Accessories: high‑pressure coolant, paper filtration, 2 pallets, touch probe, laser tool preset, chip conveyor. Suited to tight tolerances in automotive, aerospace, medical, watchmaking. Nsdpfx Aasxx U Nnsnodf

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, BIHLER Control System P-CNC 3E for BIHLER GRM 80E consist of: Nsdpfx Aaotqdb Rjnodf Control cabinet complete with SIEMENS SIMODRIVE SIEMENS Motor midel 1PH6137-4NB 40-Z

Condition: new, mileage: 708 km, power: 118 kW (160.44 HP), fuel type: diesel, empty load weight: 4,500 kg, maximum load weight: 3,000 kg, overall weight: 7,490 kg, tire size: 215/75R17,5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, total length: 7,440 mm, loading space length: 5,421 mm, loading space width: 2,480 mm, loading space height: 500 mm, operating hours: 90 h, Equipment: ABS, air conditioning, immobilizer system, onboard computer, soot filter, traction control, - Vehicle available immediately! - Chassis MAN 8.160 BL 4x2: - Permissible total weight: 7,490 kg (upgradeable to 8,500 kg), unladen weight approx. 4,500 kg, payload approx. 3,000 kg - Manual transmission - Differential lock - Engine brake with cruise control - Rolling prevention system MAN EasyStart - PTO (power take-off) - Tires: Continental 245/70/17.5 - Multifunction steering wheel - Reverse lights - Fog lights - Optional: ball-type trailer coupling 3,500 kg, 24/12V adapter - Cab in white, RAL 9010 - NEW aluminium platform body: - Internal length: 5,421 mm - External width: 2,550 mm - Internal width: 2,480 mm Nodpjwntk Ssfx Aansdf - Anodized floor frame with 8 mounted lashing rings per side - Lowered floor section 24 mm, floor plates 24 mm - 11 anodized aluminium crossmembers (80 mm) - 2 anodized aluminium subframes (130 mm, reinforced) - Front wall 1,400 mm incl. front wall supports - Side walls 500 mm high, 5 hinges per side wall - Side panels made of 25 mm snap-lock profiles with foldable step - Tailboard: height 500 mm / foldable, 3 hinges, with foldable step, powder-coated - Stakes: front: fixed, 1,400 mm high - Centre stakes: foldable, K20 - Rear stakes: foldable, 500 mm high, powder-coated - Optional: rotating beacons, additional storage boxes, reversing camera, turn assist, trailer coupling 3,500 kg - More information, additional XXL images, and directions available on our homepage at: - For inquiries in English please call ... Air conditioning, VAT deductible, ASR, ABS, service booklet, roof hatch, Distronic, radio, onboard computer, electric front windows, electronic immobilizer, fog lights, power steering, tinted windows, electrically adjustable mirrors, tachograph, spare wheel, cab: day cab, air-suspended cab, air-suspended driver's seat, electric windows, new condition, emission class: Euro 6, diesel, rear-wheel drive, excellent condition, HSN 1516, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, main inspection & emissions test renewed before sale, available for rental, dust emission sticker: 4 - green.

Condition: good (used), Year of construction: 2013, lifting height: 5,700 mm, fuel type: electric, Weights Empty weight: 1.420 kg Functional Lifting capacity: 230 kg Working height: 770 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,89x0,76 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: Haulotte Model: Optimum 8 Year of build: 2013 Condition: Used Nsdpfxjxx S Eao Aanedf Data: Max. working height: 7,70 m Platform height: 5,70 m Lifting capacity: max. 230 kg Lifting capacity on extension: 113 kg Platform dimensions LxW: 1,68 x 0,71 m Platform lenght pushed out: 2,59 m Total dimensions LxW: 1,89 x 0,76 m Height transport position with railing: 2,00 m Height transport position without railing: 1,14 m Movable up to working height: 7,70 m Ground clearance: 0,06 m Drive type: Battery Only indoor using: yes Own weight: 1.420 kg Special features: white tires, anchoring points for fall protection systems (PPE) available. Information: new batteries Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2014, operating hours: 9,554 h, functionality: fully functional, machine/vehicle number: SL8-1620455DJAAH, turning diameter over cross slide: 300 mm, turning diameter: 256 mm, spindle speed (max.): 4,800 rpm, travel distance X-axis: 198 mm, travel distance Z-axis: 508 mm, rotational speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 6,000 mm, total width: 2,200 mm, feed rate X-axis: 19 m/min, feed rate Z-axis: 24 m/min, overall weight: 5,500 kg, bar passage: 50 mm, bar diameter (max.): 32 mm, controller manufacturer: HURCO, controller model: MAX, positioning accuracy: 0.01 mm, repeat accuracy: 0.005 mm, operating hours of spindle: 2,027 h, HURCO TMM8i CNC Lathe - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 40 A - Connection: 28 kW Nedpfxsxw Sr De Aanjdf - Max. swing diameter: 525 mm - Max. diameter over cross slide: 300 mm - Chuck diameter: 200 mm - Acceleration: 0 - 3000 rpm - Turret type: VDI 30 - With a total of 12 stations - Max. spindle speed: 5000 rpm - Indexing time: 0.23 sec - Max. boring bar diameter: 32 mm - Tool shank cross-section: 19 mm - Including powered tool stations The machine is equipped with a bar feeder from BREUNING, type: ILS MUK 7012-III, year of manufacture: 2017. Also included are a chip conveyor, tailstock, and a three-jaw chuck with a diameter of 200 mm. Attention: The item must be collected firmly and bindingly between 19.01.2026 and 23.01.2026 on a date to be agreed. FCA D-76571 Gaggenau – loaded on truck.

Condition: good (used), Year of construction: 2016, Traverses XYZ: 800 x 800 x 550mm, Ndjdswq A Rgjpfx Aanef 500 x 500mm table, A axis -91 / + 121 degrees, C axis , 360 degrees, Heidenhain TNC530, Spindle Speed 20000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 60 tools, swarf conveyor.

Condition: used, Year of construction: 2018, operating hours: 483 h, machine/vehicle number: 2044093, Empty weight: 1.590 kg Lifting capacity: 230 kg Working height: 800 cm Nsdpsv Tukrsfx Aansdf Front tyres / undercarriage remaining: 40 Rear tyres remaining : 40 Tyre brand: - Transport dimensions (LxWxH): 1.9x0.79x1.98 Please contact PFEIFER GROUP for more information

Year of construction: 2022, operating hours: 2,113 h, condition: excellent (used), functionality: fully functional, Drum dryer Agromech M-829 with a chip-feeding stoker for the furnace. The drum dryer is equipped with a coal furnace adapted for burning wood waste or sawdust briquettes. The entire drying process, as well as the regulation and control of the drying air temperature, is semi-automatic and carried out by the dryer operator. THE DRYER IS BUILT FROM THE FOLLOWING MAIN COMPONENTS: Njdpfxsxzup Tj Aansdf * Coal furnace with thermal insulation, adapted for burning sawdust briquettes and wood waste * Wet sawdust feeder – chain-slat type, pit-installed, smoothly controlled by an electric inverter with a system for smooth dosing of the material to be dried * Insulated loading connector * Thermally insulated drying drum, length 9.00 m * Discharge chamber for dry material * Main dedusting cyclone with feeder * Main radial fan * Electrical control cabinet with temperature measurement and control instrumentation * Inclined screw conveyor for discharging dry material TECHNICAL CHARACTERISTICS: 1. Nominal capacity of the dryer at initial sawdust moisture 40–45% and final 15% – 1,000 kg/h 2. Amount of evaporated water – 1,100 kg/h 3. Maximum thermal power of the solid-fuel furnace – 1,000 kW 4. Maximum temperature of drying air at the drum inlet – 600–650°C 5. Average fuel consumption: * Hard coal or fuel with similar calorific value: 200 kg/h * High-calorific sawdust briquettes: 250–300 kg/h * Wood chips with moisture up to 35%: 250–350 kg/h 6. Total installed electrical power – 17 kW 7. Total weight of the dryer with refractory insulation – 16,500 kg The dryer was manufactured, assembled, and commissioned in November 2022. Operating hours: 2 113

Condition: refurbished (used), battery capacity: 465 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 564 mm, Tested traction battery for your forklift - 80V 3PZS 465 DIN A + 1-year warranty + Includes Aquamatic filling system + Includes end discharge resistor & REMA 320 connector (other connector types can be installed on request) + Capacity: min. 90-100% (C5 capacity protocol will be provided upon delivery) + Year of manufacture: 2024 Dimensions: Length: 1.5 mm Width: 564 mm Height: 784 mm Weight: approx. 1280 kg Suitable for the following models and others: Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde K 12 Linde K 15 Linde P 120 - 5007-10 - side battery change Linde P 120 - 5007-10 - vertical battery change Linde P 180 - 5007-10 - side battery change Linde P 180 - 5007-10 - vertical battery change Still MX 13 Still R 60-15 Still R 60-16 Still R 60-18 Still R 60-20 Still RX 60-16 Still RX 60-20 Jungheinrich EKX 513 Toyota 7FBMF16 Toyota 7FBMF18 Toyota 8FBMKT20 Toyota FBM16 Crown TSP 6000-A Crown TSP 7000 Doosan BR13R-5 Ndjdpfswzvz Tex Aanof Mitsubishi FBP16 Yale MTC 13 Common battery sizes available, please inquire. Transport can be arranged.

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture Ndsdpfx Aaef I Ew Hjnof XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you Thermotron environmental test chamber. Thermotron Environmental Test Chamber Water Cooled Working volume: 227 liters Temperature uniformity: All models 0.7°C Temperature range: -70°C to + 180°C Temperature control tolerance: All models 0.3°C Shipping weight: approx 400 kg Internal dimensions width 610 mm x depth 610 mm x height 610 mm Outer dimensions width 890 mm x depth 1240 mm x height 1850 mm Humidity range: All models 10% to 98% RH Humidity control: All models 2.5% RH Heating capacity in minutes -65º to 71ºC: 17 Nsdpfxsmhfr Ie Aanjdf Heating power in minutes -65º to 180ºC: 43 Heating power in minutes -40º to 85ºC: 16 Electrical requirements in full load amplifiers 230/3/60: 19 Electrical requirements in full load amplifiers 230/1/60: 25 Electrical requirements in full power amplifiers 220/1/50: 27 Cooling capacity in minutes 85º to -40ºC: 32 Cooling capacity in minutes 71º to -65ºC: 54 Cooling capacity in minutes 180º to -65ºC: 72 Compressor size: (2) -2 Hp Operating voltage: 400V 16.7 A Type: SM-8-8200 Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.