Used Nail Tie for sale (2,955)

Condition: excellent (used), Year of construction: 2016, Kliper DCM 90, lightly used, fully operational. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Rodpfx Asykrxleirjch

Condition: excellent (used), Year of construction: 2015, Tipper Tie TTChop 20 Cutter Based on more than 130 years of experience in design and a keen sense of innovation, the TTChop cutter generation TIPPER TIE sets new standards in grinding technology. TTChop20 combines functionality and advanced technology. This is an extremely versatile and yet specialized machine for each individual application. The production of raw coarse or fine sausages, tender boiled sausages or emulsions brings the same remarkable results as gentle mixing and dipping of a wide variety of components. Comes with a lot of extra knifesets. Manufacturer: Tipper Tie Model: TTChop 20 Year: 2015 Rodpfx Aiov Eamcsrech Production Hours: 9.338 hours Capacity: 200 liter Max. load elevator: 250 kg. Power: 400V / 50Hz / 98kW Machine Dimensions LxWxH: 3.250x2.600x2.200 mm Machine Weight: 4.100 kg.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 200065, overall weight: 184 kg, power: 0.3 kW (0.41 HP), type of input current: AC, We offer this used OMEC BC-5 nailing bench, year of construction 2020. Year of construction: 2020 year Machine type: BC-5 Rcsdpfx Aij Afn Disroh Serial number: 200065 Power: 0.3 kW Voltage: 220 V Frequency: 50 Hz Weight: 184 kg Phases: 1+N If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, _KRAUSSMAFFEI KM 1300 MX – SP 8100_ _Screw Ø105 mm_ _CLAMPING UNIT_ • Clamping force: 13,000 kN / 1,300 t • Mold opening force: 910 kN • Moving platen force (open/close): 159 / 153 kN • Platen dimensions: 2,150 × 1,910 mm • Tie bar distance (H × V): 1,550 × 1,250 mm • Opening stroke: 2,350 mm • Mold height (min./max.): 700 / 1,400 mm • Maximum daylight: 3,050 mm • Ejector stroke: 350 mm • Ejector force (forward/backward): 250 / 125 kN • Optional mold height (min./max.): 950 / 1,650 mm • Daylight with increased mold height: 3,300 mm _INJECTION UNIT – SP 8100_ • Screw diameter: 105 mm • L/D ratio: 23 • Max. injection pressure: 1,778 bar • Stroke volume: 4,546 cm³ • Shot weight (PS): 4,137 g • Injection flow rate: 805 cm³/s • Screw speed (nominal/max.): 126 / 159 rpm • Plasticizing rate PS (nominal/max.): 147 / 187 g/s • Plasticizing rate PE (nominal/max.): 116 / 147 g/s • Nozzle contact force: 166 kN _ELECTRO-HYDRAULIC EQUIPMENT_ • Pump motor power: 110 kW • Installed heating capacity: 59 kW • Barrel heating zones: 7 • Dry cycle rate (Euromap 6): 761 cycles/h • Dry cycle time (Euromap 6): 4.7 s • Oil tank capacity: 1,500 l _DIMENSIONS & WEIGHT_ • Net weight incl. cabinet: 77 t • Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m • Maximum mold weight: 29,000 kg _ELECTRIC SCREW DRIVE_ • Screw drive power: 117 kW • Screw speed (nominal/max.): 123 / 193 rpm • Plasticizing rate PS (nominal/max.): 144 / 226 g/s • Plasticizing rate PE (nominal/max.): 114 / 178 g/s _ACCUMULATOR (ZE)_ Rjdpfxeztpkpe Airsch • Injection flow rate: 1,732 cm³/s _EQUIPMENT_ • Removable tie bar (retractable tie bar) • Euromap 67 – robot interface • 48 hot runner controllers • 8 pneumatic cascades • 6 hydraulic cascades • 2+2 cores • MC6 control panel _PROCESSED MATERIALS_ • PP, PC

Condition: good (used), Year of construction: 1998, functionality: fully functional, Offered is a Clipper air pressure clipper from Tipper Tie type: TCNi 200BT in a fully functional condition. Workshop tested. Rcsdpfx Ajvmqyvjirsh Further information on request. Cash payment or advance payment. Sale only to businesses, no guarantee, no warranty.

Condition: excellent (used), Complete Pallet Manufacturing Line P+K & Vanderloo For sale is a highly productive pallet manufacturing system for four-way pallets. The main line from P+K GmbH was completely overhauled in 2020 and has been in almost no operation since then. The system efficiently covers the entire process from stringer prefabrication, main nailing, IPPC marking to nesting/stacking. Technical Data & Highlights: • Changeover times: Fully automatic size adjustment of almost all components at the push of a button! • Main line output: approx. 600 four-way pallets / 8 hours with only 2 operators • Stringer line output: High-performance cycle time of approx. 4 seconds per stringer • Control system: Siemens PLC S7 (main line) System Components: Pos. 1a: Template nailing machine P+K Type M/III/27/1500 (Year 2012 / Overhauled 2020) • Robust open frame, 1,700 mm passage width, max. nail spacing 1,500 mm. • 27 nail feeders in 3 nail hoppers (gearbox brake motor), stepper motor nail ejection. • 1 set (20 pcs) hammer blocks on a movable frame. For nail lengths 25–90 mm. • 11.5 kW eccentric main drive, frequency-controlled template transport (without templates). • Siemens S7 control, touch panel, memory for 99 layouts. • Pneumatic upper pallet guide (up to 9 deck boards), nail filling platform, central lubrication. Pos. 1b: Fully automatic stringer nailing machine VANDERLOO (Year 2001) • Mechanical eccentric nailing, automatic format adjustment at the push of a button. • Stringer dimensions: Length 600–1,400 mm | Width 80–150 mm (Euro & special sizes). • Independent operation: 3 block feeders with NEW buffer belts & block control. • 1 automatic board magazine, 9 nail feeders with ejection control, outfeed buffer. • Support/spare parts long-term secured through successor AVM Metaalbewerking. Pos. 2: Intermediate drive with integrated IPPC marking station (approx. 2,500 mm) • Pallet transport for intermediate operations, release manually or via automatic mode. • Auto-adjustment at the push of a button: width (700-1500 mm) & height motorized via spindle. • 2 lengthwise adjustable marking units (heating rods 2x 1,100 W), pneumatic pressing. • Temperature control unit with preheating circuit. Pos. 3: Positioning table • Further transport to stacking position, adjustable stop system, driven chain conveyors. • Synchronized auto-parallel adjustment via spindles (width 700-1500 mm). Pos. 4: Portal stacker (fully automatic with nesting) • Stable double-column portal with lifting traverse (chain) & swivel arm. Siemens S7 PLC. • Auto-gripper arm adjustment at the push of a button to pallet length. • Capacity: Sizes 600x600 to 1600x1600 mm, stacking height up to max. 3.0 m. Pos. 5 & 6: Roller conveyor & safety devices Rcsds Afyn Hopfx Airoh • Heavy-duty removal (approx. 5,900 mm), driven with 8 m/min. • Including all protective devices according to the layout plan. Terms of Sale: Sale ex works without warranty. Dismantling, loading and removal are the responsibility of the buyer at their own cost and risk. Price: On request (plus VAT).

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1234, input voltage: 380 V, input frequency: 50 Hz, Codix nailer fully rebuilt in Sophograf France 2 years ago. The machine is now setup to make doubleside stringpallets Rcodpfx Ajv Hh Hajirjh

Condition: excellent (used), JBT Tipper Tie TN4200LP automatic whole muscle stuffer, netter, clipper and rucker for producing high quality hams. Extremely rare machine on the used market. Has come direct from a UK ham factory which closed in June 2026. Very well looked after since bought new in 2016. Rcodpfxjzh N Hyj Airsh

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, TIPPER TIE SAM3E ID.NO. 2826 Tipper Tie mod SAM3E double clipper year mod 1995 with revolver system for quick change of format tubes. Rsdpfx Aiou Iw R Ijroch Dimensions 210 x 115 cm Height 200 cm.

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. Rcjdpfxjykqxds Airsh The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Year of construction: 2001, condition: good (used), functionality: fully functional, machine/vehicle number: 057, Length: 4.00 m Width: 4.20 m Height: 1.90 m Voltage: 380 V Rcedexc Em Ejpfx Airsh

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8394, Offer Number: D12L/8394 Machinetype: wire nail press Make: WAFIOS Redsw Nhwuepfx Airsch Type: S75 Constr. year: 1970 wire diameter: 1,8-3,1 mm nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse

Condition: used, Year of construction: 1986, functionality: fully functional, machine/vehicle number: D12E/8177, Offer Number: D12E/8177 Machinetype: wire nail press Make: WAFIOS Type: N61 Constr. year: 1986 wire diameter: 3,1-5,2 mm nail length: 13-150 mm Rsdpfewi Tk Ijx Airjch capacity - pieces/min: 370 Location: Europe

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: D12E/8151, Offer Number: D12E/8151 Machinetype: wire nail press Make: ENKOTEC Type: NA05 SH Constr. year: 2011 diameter range: 1,8-2,5 mm nail length: 32-57 mm output - pieces/min: 2000 Location: Europe Redpfx Aiswi Tl Esroch

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8373, Offer Number: D12L/8373 Machinetype: wire nail press Make: WAFIOS Type: S110 Constr. year: 1970 diameter range: 2,2-3,8 mm Rcedpfx Ajwi Ubnsireh nail length: 13-110 mm output - pieces/min: 350 Location: In our warehouse

Condition: used, Year of construction: 1965, functionality: fully functional, machine/vehicle number: D12E/8243, Offer Number: D12E/8243 Machinetype: wire nail press Make: WAFIOS Redpfewi Svpox Airsch Type: S300 Constr. year: 1965 diameter range: 4-10 mm nail length: 50-300 mm output - pieces/min: 150 loacation: Location: Europe

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: D12U/8492, Offer Number: D12U/8492 Machinetype: wire nail press Make: WAFIOS Rcodpfx Aiezd U Rioroh Type: N61 Constr. year: 1994 wire diameter: 3,1-5,2 mm nail length: 13-150 mm capacity - pieces/min: 370 Location: Outside of Europe

Condition: ready for operation (used), functionality: fully functional, The TIPPER TIE Technopack KDC-SV Clipper is engineered to meet the most stringent requirements of the food processing industry. This semi-automatic machine ensures fast, reliable, and hygienic clipping of natural, artificial, or plastic casings. Its German precision technology makes it a highly valued piece of equipment in settings where every second and every gram matter. Featuring a full stainless steel frame, the KDC-SV offers optimal corrosion resistance, enabling thorough and frequent cleaning without compromising durability. Additionally, it is equipped with an easy casing diameter adjustment system, providing high flexibility for multi-format production lines. This makes it an ideal solution for demanding facilities processing a variety of products. The clipper also stands out for its ergonomic design: its foot pedal allows hands-free operation for smoother and safer product handling. Furthermore, the intuitive control panel allows for quick configuration, significantly reducing downtime. All these features contribute to consistent and controlled output, even during peak production periods. Investing in the TIPPER TIE KDC-SV means choosing a robust, reliable, and future-proof machine capable of supporting high throughput while ensuring impeccable closure quality. It represents a strategic choice for professionals aiming to boost productivity without compromising on safety or hygiene. Technical specifications Clipping speed: up to 50 cycles/minute. Compatible casing diameter: 25 to 100 mm. Compact dimensions: 1100 x 600 x 1450 mm. Power supply: 230 V single-phase—low consumption. Stainless steel construction—enables high-frequency, thorough cleaning. Redew I R H Nopfx Airsch

Condition: good (used), Year of construction: 2010, For Sale: Redoy Spg Ropfx Airsch Raw Material Dosing System Brand: AZO Year of manufacture: 2010 Included: - 8x dosing tank 500 liters - complete documentation - frames - load cells - dosing screws If you have any questions or comments, please feel free to contact us. Inspection is possible on site. Best regards, Leo Holland

Year of construction: 1987, condition: not inspected (used), Used condition. 600 nails per minute. Minimum diameter of wire 2.2 mm Maximum diameter of wire 3.15 mm Minimum length of nail 45 mm Maximum length of nail 80 mm Rsdof Um Uzopfx Airjch Oil consumption 0.036l/ 19800 nails Total weight 1604 Kg

Year of construction: 1973, condition: not inspected (used), Great condition. 900 nails per minute. Minimum diameter of wire 0.7 mm Maximum diameter of wire 1.4 mm Minimum length of nail 6 mm Maximum length of nail 25 mm Rcedpfxofy Uwde Airoh Oil consumption 0.1l/ 8 hours Total weight 540 Kg

Year of construction: 1990, condition: good (used), Great condition. 900 nails per minute. Minimum diameter of wire 0.7 mm Rcjdpfxsfmgryj Airoh Maximum diameter of wire 1.4 mm Minimum length of nail 6 mm Maximum length of nail 35 mm Oil consumption 0.1l/ 8 hours Total weight 540 Kg

Condition: used, Second-hand machine Condition: as new Specifications and technical details to follow Rcjdpfx Aozk Nkksiroh

Condition: used, functionality: fully functional, Complete nailing line Automatic block feeder and cutter Automatic block loader Redpswhftfsfx Airech Nailer Turner Nailer Corner cutter Electric marker Chamferer 90° rotator Turner Stacker Output transfer

Condition: used, Year of construction: 1975, functionality: fully functional, machine/vehicle number: D12L/8008, Offer Number: D12L/8008 Machinetype: wire nail press Make: WAFIOS Type: N4 Constr. year: 1975 diameter range: 1,8-3,4 mm nail length: 10-80 mm output - pieces/min: 550 Rcsdjx Iggtspfx Aireh Location: In our warehouse