Used T Slot Table for sale (43,477)

Condition: good (used), Laenge: About 2430 mm Width: About 1520 mm Heithrange: About 540 mm Dsdpod Nmdfofx Ag Rokg

Condition: used, Universal milling machine table, angle table, setup angle, clamping table, presumed MAHO make T-slot table, add-on table for universal tool milling machine Djdpfsxy Styjx Ag Rekg Table no.: 76-400-1 / 2210 05 00 Table size: 700 x 330 mm Overall height: 210 mm T-slot width: 12 mm T-slot pitch: 45 mm - Table plate with 7x T-slots, 12 mm each - Mounting surface 90°, 13 mm diameter holes, 14 mm elongated holes for fastening and 12 mm guide slot - Hole spacing, top mounting plate Ø 13 mm = 500 mm, 50 mm from the table surface (measured at center) - Hole spacing, middle mounting plate Ø 13 mm = 472 mm, 95 mm from the table surface (measured at center) - Elongated hole spacing, middle mounting plate = 475 mm, 140 mm from the table surface (measured at center) - Elongated hole spacing, bottom mounting plate = 475 mm, 185 mm from the table surface (measured at center) Dimensions (L x W x H): 820 x 330 x 210 mm Weight: 61 kg In good condition

Condition: good (used), Used Bode - T-slot clamping table Dkedexqpctjpfx Ag Reg Length x Width x Height = 4000 x 1500 x 200 mm

Condition: ready for operation (used), T-Slot Table, T-Slot Worktable, T-Slot Fixture Table 3000 x 1750 mm, Used Machine Overall Dimensions: 3000 x 1750 x 350 mm Slot Size: 65x27 mm Weight: 3500 kg Dksdpsv R Dqvofx Ag Reg

Condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 17268, Technical data: -Get well plate surface -Length 2000 mm -Approx. 1000 mm wide -Height approx. 1600 mm -Top plate thickness approx. 95 mm Dksdedd Dmxepfx Ag Reg -Top plate with internal ribbing - 4 piece t grooves on the surface of the table length 2000 mm -Centre distance of the T-slot table top 230 mm each -Table side L 2000 mm with 12 holes M27 -T - slot width approx. 40 / 67 mm -T - groove depth approx. 35 / 60 mm -Space requirement L 2200 X 1200 x H 1600 mm - weight approx. 4980 kg

Condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 17266, Technical data: Dkodpfodd Rcyex Ag Rjg -Length 2500 mm -Approx. 1000 mm wide -Height approx. 800 mm -Top plate thickness approx. 90 mm - 4 pieces t grooves in the table surface length 2500 mm -Centre distance of the T-slot table surface each 215 mm -T - slot width approx. 40 / 70 mm -T - groove depth 60 mm -Space requirement L 2700 X 1200 x H 800 mm - weight approx. 3700 kg

Condition: good (used), machine/vehicle number: 21494, OFFER 21494 Technical data: Dodpfx Agjhii R Ds Rokg - Clamping surface approx. L 900 x D 600 mm - Table height 480 mm - Circumferential water channel - 3 pieces T - grooves M 16 L 900 mm - lateral flange plate - Space requirement L 1000 x D 760 x H 480 mm - Weight approx. 300 kg

Condition: used, 2 clamping plates, 1 pair of clamping bars with T-slots Clamping block, press table, auxiliary table with T-slots Length of each clamping bar: 900 mm Width of each clamping bar: 295 mm Thickness of each clamping bar: 130 mm Dkedpoxf Uwlofx Ag Rsg - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All faces machined Net weight per clamping bar: 240 kg Good condition

Condition: used, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel gray cast iron Djdjthuzpjpfx Ag Rekg Table unit with clamping plate and very solid guideway Table clamping surface 5500 x 2000 mm Travel of the table clamping plate approx. 3100 mm Table height 1050 mm Table load: max. 20 tons Ball screw: Ø 100 mm Thread pitch: 20 mm (single-start) - Processing table guided very stably on the bed - Metal telescopic guideway cover - comes from a DROOP & REIN portal milling machine - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots 28 mm - Drive via SIEMENS 1FT6134-6AB71-1AG2 servo motor with IC200448S/R encoder (RN 000 B25) Total length 9500 mm Width 2000 mm Overall height 1050 mm dead weight 28 ton. good condition

Condition: used, Round clamping plate with T-slots Straightening plate and clamping table Diameter Ø 1500 mm Centering bore Ø 80 mm Plate thickness 54 mm Working height 970 mm Dkodpfev Ed Svox Ag Rjg - 6 T-slots 18 mm - 3 threaded holes M20, pitch circle diameter 1000 mm - Steel base without central bore Weight 785 kg good condition

Condition: good (used), Table size:1500x1500mm Capacity : 6t Dkjdpfxsfvqmxj Ag Rjg Dimension: 1600x2500x2000mm Hydraulic

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -Width: 390 mm -Length: 1185 mm -Height: 42 mm -Groove width: 18 mm -Holes: see photos -Weight: 145 kg Dodpfxof Nb Dlj Ag Rekg

Condition: good (used), Year of construction: 1963, Table size: 1250x1100 mm Spindle diameter: 90 mm Tool holder: SK40 Dsdpfxjx Rn U Rs Ag Rskg Spindle speed: 9-1000 rpm

Condition: excellent (used), Year of construction: 2000, Saw blade tilting up to 45.5 degrees Cutting height 145 mm max. saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/ 4000/ 5500 rpm Motor power 5.5 kW Suction DM - DM 120 mm max. cutting length 3300 mm Djdpfx Asmmb Acog Rekg Dimensions L x W x H = 3300 x 3800 x 1400 mm Weight approx. 1365 kg Generally: parallel fence width adjustment with hand-wheel on the front of the machine Digital display for cutting width Saw blade height and tilting adjustment via foot pedal Scoring unit adjustable by electric motor Length stop on the cross table with digital display retractable parallel stop CE incl. manual incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Dkodsv Ai N Uopfx Ag Rsg Storage location: Nattheim

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Features and technical data: - Drill depth adjustment via maintenance-free linear guide - Efficient and economical operation thanks to rapid feed system, eliminating the need for tedious cranking - Smooth and stepless movement of the drilling unit - Height adjustment with fine tuning and gas pressure cylinder for weight compensation - Cross travel and height adjustment with scales and adjustable stops - Vibration-free operation due to robust steel construction - Drill depth adjustable using scale and stop - Drill head height adjustment can be fully used for vertical slotting - Large, high-quality cast iron table with ground surface - Motor power: 1.5 / 1.9 kW - Voltage: 400 V - Speed: 1,400 / 2,850 rpm - Westcott drill chuck: 0–20 mm - Maximum drilling depth: 220 mm - Drilling width: 340 mm - Height adjustment: 145 mm - Drill head swivel range: -60° to +60° Dsdpfxsxllwco Ag Rekg - Drill table size: 595 × 315 mm - Table extension: 2 × 200 × 220 mm - Drill table height: 830 mm Dimensions: 1,200 × 1,050 × 1,300 mm Weight: approx. 240 kg Availability: short-term Location: Flörsheim

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, surface plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Manufacturer: Planolith, granite measuring plate hard stone measuring plate -Size: 2000 x 1500 mm -Accuracy grade: O (< 0.012 mm) Dkjdpoub D Rlofx Ag Rjg -T-slot: width 14 mm -Dimensions: 2020/1520/H256 mm -Weight: 2360 kg

Year of construction: 1982, condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring mill, T-slot plate -T-slot plate: for milling machines -Width: 500 mm -Length: 500 mm -Height: 87 mm -Plate: is solid -Groove width: 12 mm -Dimensions: see photo technical drawing -Quantity: 21x mounting plates available Dksdpfx Agehubczj Rjg Price: per piece -Dimensions: 500/500/H87 mm -Weight: 91 kg/piece

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, T-slot plate, clamping plate, marking plate, measuring plate, measuring table, straightening plate, marking plate -T-slot plate: clamping plate with solid base frame Dkodpfxjuh H D Io Ag Reg -Length: 2495mm -Width: 1435 mm -Plate: with support ribs -Groove width: 28 mm -Groove spacing: 152 mm -Total dimensions: 2545/1515/H835 mm -Weight: 2860 kg

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 2005 mm -Length: 2000 mm -Height: 210 mm Dkodpfx Ascfyghog Rjg -Plate thickness: 120 mm -Plate: with support ribs -Groove width: 28 mm -Dimensions: 2000/2005/H210 mm -Weight: 2700 kg

Condition: good (used), Clamping plate, marking-spotting plate, measuring plate, measuring table, surface plate, marking plate, test plate, control plate, granite measuring plate, hard stone measuring plate, granite measuring plate -Material: Granite measuring plate Hard stone measuring plate -Size: 840 x 1840 mm -Accuracy level: Djdpfxswxd S Ue Ag Rskg -T-slot: width 10 mm -Transport dimensions: 840/1840/H240 mm -Weight: 535 kg

Condition: good (used), Clamping plate, welding table, straightening plate, T-slot plate -3D welding and work table Dkedpfx Asb A Iqaeg Rsg -in aluminum for stainless steel processing -for positioning and finish welding with T-slot system -Mounting area: 1000x1000 mm -2x pneumatic clamping cylinders with ground connection -Dimensions: 1000/1400/H1300 mm

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 945 mm -Length: 2990 mm Dedpfxjb S Taqs Ag Rokg -Height: 58 mm -Working height: 870 mm -Plate: with support ribs -Groove width: 24 mm -Center distance between the T-slots: 180 mm -Dimensions: 3605/950/H870 mm -Weight: 2290 kg

Condition: good (used), T-slot plate, measuring plate, measuring table, clamping plate with T-slots, plate field, welding table, welding table -Dimensions: 250/1450/H170 mm -Sheet thickness: 28 mm -Plate is: with supporting ribs -1x T-slot: 12 mm Dkedpfx Aecbqqxjg Rjg -1x: Longitudinal groove -Weight: 156 kg

Year of construction: 1982, condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer -T-slot plate -Width: 300 mm -Length: 420 mm -Height: 70 mm -Groove width: 14 mm -Weight: 52 kg Dksdpfx Agefkt Iie Rjg