Used Non Ferrous Separator for sale (13,415)

Condition: used, Year of construction: 1993, machine/vehicle number: 5/4573, total width: 7,500 mm, total height: 11,400 mm, overall weight: 45 kg, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set (ATTENTION: filter set is not included in the scope of delivery) The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Lsdpfoqmmalex Aabsah Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: new, Size: 1250*1250*1550 mm Lajdpfxow Ac D Ds Aabsh Weight: 600 kg Power: 1.5 kW Capacity: about 500–1000 kg/h Bottom discharge type

Year of construction: 2021, operating hours: 200 h, condition: like new (used), functionality: fully functional, conveyor belt speed: 3 mm/s, machine/vehicle number: IS 2R 7, 1. Eddy current separator, our type IS 2R 750, having: • - Working width: 750mm; • - Magnetic Rotor with 20 magnetic poles; • - Magnetic field made by Neodymium N45 magnets, stronger than the standard ones (N35); • - Belt made in pvc green, double ply, with n.2 strips mm 10 x 10 x 750; • - Dielectric Cylinder covered by our epoxydic mixture; • - N°2 vertical roller will keep the belt centered • - Gearmotor W75 type, 1.5 kw for the belt + 4 kw for the magnetic rotor; • - Complete frame: chassis + basic frame and discharge cap with installed one splitter (adjustable in 3 directions); • - N°4 Vibrostop installed under each machine legs (Total 16 vs); 2. Electric control panel (Loc/Rem Control) built in waterproof box (IP55), and characterized by: -Double door, external plexiglass + internal steel; -Power inverter (1 to control the magnetic rotor + 1 for the conveyor belt); o -Pctivation Relay for the vibro-feeder; -Touch Panel, installed on the second door, characterized by: ➢ 4Gb Internal memory; ➢ Sim data Slot; Lasdpfx Aswtzqkoabjh ➢ Ethernet port; 3. Vibro-feeder, our type C.V. 70.150, having: • - Size: width 700 x length 1.500 mm • - Table with adjustable inclination, range 5°÷7°; • - Basic frame to be fixed on the ground; • - N°2 synchronized vibrating motors, using the dual motor principle, 900 watt/each; • - Wiring in electrical junction box, installed directly on to the machine. The equipment was purchased at the end of 2021 directly from the Italian manufacturer MALAMAN C.T.C. which also installed it in our factory. The equipment works perfectly and can be tested at any time in our factory. Upon request, we can also provide installation + commissioning at the buyer's location. EXW Bucharest Price 44 800 euro NETTO

Condition: new, Efficient extraction of cooling and lubricating fluids directly at the machining center The two standard units, AL-KO OIL JET 600 and OIL JET 1200, are the ideal solution for direct extraction of oil and emulsion mist from all common turning, grinding, and milling machines. Lajdpfx Aewwt Tleabsh Application areas: AL-KO OIL JET units are used wherever oil and emulsion mist generated during the machining process needs to be directly extracted from the workspace of modern metal-cutting machines. Depending on workspace size, operating time, and the type of coolant used, either the OIL JET 600 or the more powerful OIL JET 1200 is selected. AL-KO OIL JET units are compatible with all standard coolants and lubricants and are installed directly onto the machine tool or positioned alongside on an optional mounting column. Functionality: The highly efficient filter system of AL-KO OIL JET units features, as standard, a three-stage filtration process that removes emulsion content and material particles from the extracted air. 1st stage: Washable metal mesh filter 2nd stage: Filter mat (LoTex®) with frame 3rd stage: Main filter cassette (ePM1 80%) The first stage separates coarse particles. The second stage, made from a nanocoated, drained mat, separates and channels away emulsion content. The third stage filters out the finest residual particles. Emulsion collected mainly in the second filter stage is gathered in the lower part of the unit and can be drained off. Applications: - Lathes - Machine tools - Metal-cutting machines Advantages: - Compact design - High separation efficiency thanks to three-stage filtration - Energy-efficient EC motors - Simple, tool-free filter replacement - Numerous options

Condition: excellent (used), Separator screen, slotted screen basket, slotted screen baskets, replacement basket, replacement baskets, separator basket, separator slotted screen, separator filter grid, separator grid, separator screen for slurry separator, round screen, slotted screen -Slotted screen: separator screen -Gap dimensions: mm -Inside: Ø 129 mm Ledpfxowx E Tao Aabjah -Dimensions: Ø 136 x 800 mm -Weight: 3.8 kg

Condition: new, Year of construction: 2024, operating hours: 1 h, functionality: fully functional, table length: 3,000 mm, It is primarily designed for use in recycling of waste cables (used to separate copper or aluminium particles from plastic ones), but because of its unique design it is also applicable for the separation of different particles (eg. the electronic waste, the recycling of automobiles and industrial radiators, the recycling of batteries, catalysts, or for the separation of any two particles of different specific gravity). Lsdpsuzyfhofx Aabjah A new version with double beds enables high throughput of material with very high purity of the obtained fractions (copper) and copper loss is reduced to zero. The machine is equally efficient in the separation of the granules obtained by grinding of solid cable and granules of so called hair wire. Unlike the dry separator, here in plastic there are no copper particles. Several companies bought it just to screen the plastic they got by recycling of cables with dry separator and thus additionally extracted copper from the plastic (up to 10%). There are standard three sizes that can recycle 350-1000 kg of ground mass per hour, but on request there can be larger performances (the machine code is also the size of table). The machine is extremely quiet and peaceful and is not it necessary to additionally be fixed on the ground (foundation). One can easily be built on your existing recycling line or we can offer you the cable granulator, and conveyor belt for material supplying from granulator to separator or from the separator.

Year of construction: 2017, condition: good (used), machine/vehicle number: 4068, The cost-effective drainage of condensate for your compressor. The oil is separated from the water with a filter set. The filter set is included in the scope of delivery. The purified water (only in conjunction with the filter set) is approved for discharge into the sewer. Guarantee and warranty are excluded in this advertisement. Ledpfx Aajqmmvrjbeah Price on request.

Condition: used, Year of construction: 2015, fuel type: diesel, power: 149 kW (202.58 HP), motor manufacturer: Volvo, Field of application: Construction Empty weight: 2.532 kg Generator capacity: 150 kVA Serial number: ESF501587 Transport dimensions (LxWxH): 3.38x1.18x1.7 Lasdewaf Dnspfx Aabjh Please contact PFEIFER GROUP for more information

Year of construction: 2021, operating hours: 400 h, condition: like new (used), functionality: fully functional, Electrostatic separator (corona) - EBS-4-271200 - builded to extract the metals from the rejection of the plastic from electric cable process Including additional options: - 3 screw transporters; - 3 m3 input hopper; - mechanisms for changing material flow and stand for big bag for mix collection; - touch screen for control cabinet english / rusian language; - set of spare parts Designed for dry high-efficiency separation of materials, that are differ in their electric properties: - mixtures of plastics and metals, including shredded cables, into metal (copper, aluminium), and non-conducting material (plastic); - mixture of different materials, provided that one of the components has conducting properties (extraction oftextilecord from rubber crumb in the processing of used tires ); - shredded WEEE (including PCB’s) into metal (aluminium, copper, nickel, bronze, and other) and nonconducting materials (plastic, textolite, fiber-glass plastic, and other), and also for: - separations of non-metal raw material (feldspar, pegmatite, quartz sand); - enrichingofdroughconcentratesofores of rare metals (titan-zirconia, tantalum- niobic, tin-tungsten, monazite), ores of precious metals (gold, silver); - benefication of diamond ore. Ljdpfxowcp I As Aabsah The equipment was purchased at the end of 2021 directly from the prestigious manufacturer PRODECOLOGIA, which also installed it in our factory. The equipment works perfectly and can be tested at any time with PVC plastic, from our Guidetti plant for electric cable recycling. Upon request, we can also provide installation + commissioning at the buyer's location. PRICE : 108 000 EURO- netto

Year of construction: 1993, condition: used, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. The unit is made of stainless steel. The extractor is suitable for outdoor installation thanks to a built-in heater that prevents water from freezing. Brand: Venti Oelde Model: RWA 400 15 Kw fan. Capacity - 8000 m3/h Laedjtixlbspfx Aaboh year of production : 1993 Inlet diameter - 400 mm Control cabinet with technical documentation included.

Condition: new, Year of construction: 2024, machine/vehicle number: 5.3495.0, Kaeser Oil/water separator Type: Aquamat CF 6 Tested and certified condensate treatment The AQUAMAT treatment system enables the compressor operator to carry out condensate treatment in-house, thereby greatly reducing the amount remaining for disposal. An AQUAMAT can save approximately 90% of the costs associated with arranging for the full volume of condensate to be treated and disposed of by a specialist contractor, therefore the initial investment is very quickly recovered. Technical data Suitable for max. compressor delivery volume 3.8 m³/min (using: Sigma Fluid MOL or S 460; for Kaeser rotary screw compressors in climate zone 2*) Receiver volume 18.6 l Fill volume 11.7 l Condensate inlet connection 2 x G 1/2 Water drainage connection (hose diameter) DN 10 Net weight approx. 5.8 kg Permissible condensate temperature +5 to +60 °C Dimensions (W x D x H) 387 x 254 x 595 mm Specifications subject to change without notice. Factors such as compressor type and oil type must be taken into consideration when selecting AQUAMAT condensate treatment systems. Lajdpfx Aev Ta D Deaboh

Condition: refurbished (used), Electromagnetic belt separator | Magnetic separator | Electric overbelt magnetic separator | Electromagnetic overbelt magnetic separator reinforced series Factory overhauled (general overhaul - second-hand) with new bearings (spherical roller bearings) and new rubber conveyor belt Make: Wagner Magnete Type: 454-95/100-600 Lsdpfjw Hnvgex Aabeah Conveyor belt width crosswise: 1200 mm Conveyor belt width lengthwise: 1000 mm Conveyor belt distance: 300 - 400 mm Power consumption magnet: approx. 5.0 kW Drive: SEW bevel gear motor Motor power: 3.0 kW, 400 V, 50 Hz Magnet (L x W x H): approx. 1240 x 950 x 600 mm Belt: EP 400/3 4+2 rubber conveyor belt with T-profile (40 mm), new Machine weight: approx. 3200 kg Machine color: RAL 6018 yellow-green Areas of application: Waste wood, waste paper and glass, mining, e-scrap, commercial waste, foundry, household waste, coal-fired power stations, plastics, building rubble, sawmills, scrap processing, bulky waste, steelworks, cement and gravel works

Condition: excellent (used), Year of construction: 2011, We are selling 2 pieces of Alpha 1200 separators, year of manufacture 2011. Lsdpfxslpafde Aabjah New rotors installed.

Condition: used, Year of construction: 2013, Drive: Wheel Empty weight: 1.984 kg Lifting capacity: 227 kg Working height: 1.000 cm Serial number: GS3214C-11412 Transport dimensions (LxWxH): 2.44x0.81x2.32 Ljdpfxetr I S Tj Aabjah Please contact PFEIFER GROUP for more information

Condition: refurbished (used), Manufacturer: Steinert Type: UMS 45 70 80/61 3,1 kW / 51 A. / 61 V. Laodpfewvaidox Aaboh 100% ED Magnet L x W: 806 x 750mm. Conveyor Belt: 800mm. (new) AA.: Ca. 1.300mm. Weight: 1.550 KG With new transformer rectifier of 380V. Primary.

Condition: used, Year of construction: 2003, suction capacity: 3,600 m³/h, Dust extraction , water extraction vacuum filter, separator for grinding, polishing, cutting, brushing, deburring stone, plaster, aluminum and metals . The ideal filter for extracting and filtering dust that does not allow the use of traditional cartridge or bag filters, ensuring reduced maintenance costs. It is ideal for cutting , grinding , brushing and polishing departments. 4 Kw fan. Capacity - 3600m3/h year of production : 2003 Laodsrwm Izopfx Aabjh

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 102147.10340, overall weight: 4 kg, Kaeser F26KC cyclone separator with ECO-Drain 31 steam trap suitable for up to 2.6 m³/min compressed air. Laedpevm Ahlsfx Aabeh KAESER KC cyclone separators remove condensate from the compressor's compressed air outlet. They are a must for trouble-free and energy-efficient operation of downstream dryers and filters. KC cyclones are supplied with the economical and particularly reliable ECO-DRAIN 31 steam trap as standard – including test button and alarm contact, of course. In addition, they are particularly easy to combine with KAESER filters and can be fixed to the wall with optional wall brackets. This makes installation particularly easy. Specifications: Volume flow 2.6 m³/min Connection compressed air inlet: G 1" min. overpressure: 2 bar Max. overpressure: 16 bar Weight : 4.0 kg Dimensions W x D x H : 241 x 225 x 515 mm Condensate drain: ECO Drain 31 Visit our business premises in Erlangen. On over 450 square meters of exhibition space you will find a large number of used and new compressors.

Condition: used, The SEPA 2000VT meat separator is a high-performance machine designed for use in the food industry, particularly in the processing of meat, fish, and fatty products. Manufactured by the renowned German company Hoppe GmbH, it ensures precise separation of ingredients while maintaining maximum hygiene and process efficiency. Ljdjwm Edhepfx Aabeah The separator has been designed for intensive, continuous operation in industrial plants where reliability, low energy consumption and ease of use are key. Technical specifications: Manufacturer: Hoppe GmbH Brand: SEPAMATIC Model: SEPA 2000 VT Power supply: 400 V / 50 Hz Rated current consumption: 22 A Control voltage: 24 V Electrical diagram: 0695030 B Country of manufacture: Germany ✅ Key advantages: Precise separation of meat and fat – high quality of the end product German quality – durability, reliability and long service life Suitable for continuous operation – ideal for large production facilities Simple operation and maintenance – quick access to main components Compliance with food hygiene standards – stainless steel construction Low energy consumption – optimized operating parameters The SEPA 2000VT meat separator is the perfect solution for companies that want to optimize the separation process of raw materials while maintaining high quality and cleanliness of production.

Condition: used, Year of construction: 2007, operating hours: 247 h, Drive: Wheel Lsdpfxstr Iq So Aabjah Empty weight: 790 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 560 cm Serial number: A200007286 Max. horizontal reach: 0 m Transport dimensions (LxWxH): 1.36x0.76x1.63 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2022, Provisur AM2C Beluga SD1830 separator features cutting-edge separation technology combined with a low RPM, single screw feed system, ensuring delicate handling of raw materials. It provides a high-quality, ground product while keeping the fibers and textures intact. The final product is of high quality. Controls are mounted directly on the machine for easy access. The design has a small footprint, saving space. Machine has a versitile operation and can work with red meat, poultry, pork, fish, fruits, vegetables etc. Technical features: Laedeth Ufwepfx Aabjh Gentle handling – Low calcium (

Condition: used, Year of construction: 2015, fuel type: diesel, power: 149 kW (202.58 HP), motor manufacturer: Volvo, Field of application: Construction Empty weight: 2.532 kg Lsdpfx Aev Tuk Ejaboah Generator capacity: 150 kVA Serial number: ESF521588 Transport dimensions (LxWxH): 3.38x1.18x1.7 Please contact PFEIFER GROUP for more information

Condition: excellent (used), Year of construction: 2019, Provisur’s AM2C STS 2000 (soft tissue separator) boasts a durable design crafted from premium materials, ensuring dependable performance. This technology efficiently removes bone fragments, sinew, and cartilage from meat and fish while preserving the fiber structure. It’s also versatile, suitable for dairy depacking and extracting creams from vegetables like avocados and garlic. As products enter the separator, a flexible pressing belt and an adjustable perforated drum mechanically separate the soft components from hard contaminants, which are then discarded through a waste chute. In set with trolley for tools and drums. Equipped with a hopper screw feeding system. Lodotixrlspfx Aabsah Technical data: Power: 12kW Efficiency: 1.000-2.300 kg/h Manual/automatic operation Weight: 1800kg

Condition: used, Year of construction: 2014, Drive: Wheel Empty weight: 1.146 kg Lifting capacity: 159 kg Working height: 802 cm Serial number: GR14-35452 Transport dimensions (LxWxH): 1.35x0.8x1.78 Ledpfx Aowvplnoabsah Please contact PFEIFER GROUP for more information

Condition: good (used), The RSDD-04AU-V28 Beehive Separator is a high-capacity machine designed for deboning applications. It features a twin-screw rotary design that is known for delivering premium product texture. This machine can handle a wide range of raw products, offering versatility in its operation. The separator is constructed from stainless steel, making it resistant to acid. Laodpjrtn A Ajfx Aabeh Equipped with 1/2mm drum Capacity: 450-1,600 kg/h *Actual capacity will depend on application Dual motor Twin feed-screw pump Mechanical variable speed pump Total dimensions: L: 2250 x W: 900 x H: 1550 mm

Condition: used, Year of construction: 2022, operating hours: 294 h, Drive: Wheel Empty weight: 2.160 kg Lifting capacity: 230 kg Lodpfx Aotr Ncroabsah Working height: 1.000 cm Serial number: 2104616 Transport dimensions (LxWxH): 2.49x0.81x2.18 Please contact PFEIFER GROUP for more information