Used One Shaft Shreder for sale (14,013)

Condition: used, Year of construction: 2015, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 6193, type of input current: three-phase, Complete recycling plant available for sale, comprising a Lindner Micromat 2000 industrial shredder together with Godswill baling equipment, conveyors, control systems and associated plant. This is a substantial industrial recycling setup, previously used for processing waste paper/cardboard and producing compact, baled material. The plant is being offered as a complete package and represents an excellent opportunity for a recycling operator looking to acquire a ready-made processing system. Main equipment includes: * Lindner Micromat 2000 industrial shredder * Manufactured in 2015 * Machine No. 6193 * Motor power 132 kW * 400V / 50Hz * Manufactured in Austria * Godswill GB-1108F baling press * Manufactured 2009 * Series No. 982472 * 40 HP * 415V / 50Hz * 72A * Additional Godswill paper machinery/baling equipment, with a machine rated at approximately 80 HP * Hydraulic systems and associated equipment * Feed and discharge conveyors * Electrical control panels and operator controls * Safety/emergency-stop systems * Material handling and associated ducting/extraction equipment Nsdpfx Asz Eh Ihjb Uedb * Complete interconnected plant infrastructure as shown in photographs The machinery has all paperwork from new and installation. Low hours. All services completed and Documented. Ideal for: Waste paper and cardboard recycling • Material recovery facilities • Recycling companies • Waste processing operations • Industrial baling and shredding applications Sold as a complete plant/package.

Condition: new, new ! all stainless steel 2 speeds 2 mixing directions 1,8 kW – 2,5 kW safety lid Suitable for loader with “Easy Connect” Easy clean Hinged safety gard CE-approved overall dimensions (l x w x h) : 1.676 x 830 x 1.428 mm (open lid: H: 1.985 mm) The Barmix 180 litre twin shaft paddle mixer is an ideal machine for mixing all types of food products within the meat, poultry, fish, vegetables, dairy, cereal, confectionery, petfood and sandwich filling industry. Mixing for meat and vegetarian burgers, sausages, meatballs, coleslaw, potato salad and other wet salads, mash potato, vegetables fresh and frozen, cereals, raw petfood the mixer is ideal for mixing many products that are free flowing and easy to move around. Ndedpjz Dvdusfx Ab Ueb The Barmix 180 features a special paddle shaft arrangement with one slightly higher than the other to give a more effective and quality mix. The effective mixing action with high peripheral wing speed gives good protein extraction and uniformed distribution of spices, additives and liquids. Also the Barmix 180 Litre Mixer produces a gentle mixing action which reduces particulate destruction maintaining the product structure and its original quality.

Condition: used, Year of construction: 2023, No. 10017 Two-fraction star screen GÜNTHER MULTISTAR ONE / MS ONE Used, year of construction 2023 Approx. 200 operating hours Mobile star screen for screening waste wood, biomass, green waste and other screenable materials in 2-fractions as well as for overlength recycling - Input material: specific weight 200 - 650 kg/m³ / moisture max. 55% / piece size and individual weight max. 1000 mm and 20 kg / material feed with conveyor belt or wheel loader / throughput capacity up to 200 m³/h - Control, operation, switch cabinet: Type PLC / Operation display, control panel / Manual or automatic operating mode / Power supply AC 400 V, 3P, 50Hz via 32A plug on site - System interlinking: 16-pin plug connection / Cable (15 m) incl. winding device on base frame / Screen deck overrun for EMERGENCY STOP / Dummy plug in control cabinet door - Hydraulic support legs: 4 hydraulic support legs / Increase the discharge height of the useful fraction by 450 mm / All support legs can be controlled individually - Feed hopper: Capacity approx. 2.5 m³ / Feed height 2500 - 3000 mm / Free throw-in length 2300 mm / Conveying medium scraper chain conveyor with maintenance-free flat link chain / Drive 2.2 kW adjustable via frequency inverter - Collecting belt: Center distance 4600 mm / Belt width 1000 mm / Belt type smooth / motor 2.2 kW, v=1.2 m/s - Connect: Connect! is the innovative telematics solution from Komptech / overview of operating status, error messages, statistics, GPS localization, capacity utilization - Petrol-powered hydraulic pump - HyDrive System 2.0 MS ONE - Screen deck 60/90: Output: 0-60/90 and > 60/90 mm / Length 4500 mm / Width 1450 mm / Screen area 6.5 m² / Position 11° incline / Star shafts 17 pieces / Star diameter 340 mm / Star width 55 mm / Center distance 266.5 mm / Cleanstar cleaning elements / motor 2 x 4 kW / Adjustable via frequency inverter - Drive motors 50 Hz: motors for driving the screen deck / 2x 4 kW 50 Hz - Dosing roller: width 1560 mm / diameter 215 mm / drive 3 kW drum motor - FKAB with magnetic drum: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined / Belt type profiled, 15 mm chevron / 3.0 kW motor, v=2.2 m/s / Usable discharge height 3500 mm - 3950 mm / Multi-pole magnetic drum in permanent version / incl. discharge chute - Over-grain discharge conveyor: Center distance 6200 mm / Belt width 1000 mm / Installation position 30° inclined, 220° pivoting / Belt type profiled, 15 mm chevron / motor 3.0 kW, v=2.2 m/s / Usable discharge height 3600 mm - 4050 mm Njdpfx Abjwhy T Ts Usdb Transport dimensions approx. 8176 x 2466 x 2600 mm LWH Weight approx. 9200 kg Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, transport and assembly Subject to errors in the description and price Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale No warranty is given for used machines, the following applies: “purchased as viewed” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: like new (used), functionality: fully functional, Knife shaft Z4, in like-new condition. Planer shaft Z4. 1 unit for the bottom. 1 unit for the top. Originated from K133, and we can also shorten it by 300 mm for K103. Ndedpfxjyur N Ej Ab Usb 40% cheaper than a new one from the manufacturer.

Condition: good (used), Year of construction: 1998, Motor power [kW]: 150 (2x75) Number of blades on the shaft: 48 (2x24) Blades [mm]: 80x80x45 mm (reinforced/extended mounting threads). New, square. 4 blades, of which 3 blades are 100% and 1 blade is approximately 70% new Rotor: Shaft width [mm]: 2,100 Number of shafts: 2 Shaft diameter: 500 mm Shaft speed [rpm]: 75-165 Screen diameter [mm]: 30 mm Chamber dimensions [mm]: 2,100 x 1,250 Automatic start: Soft start Rated voltage: 3 x 400 V/50 Hz Rated current: 160 A-200 A Automation: Siemens Simatic Weight [kg]: approx. 14,500 Dimensions: Length [mm]: 3,850 Width [mm]: 2,720 Nsdpfjibzbhjx Ab Uodb Height [mm]: 2,700 Documentation: German 2014 A complete overhaul was carried out. A list of these parts and pictures are available upon request. This machine has not been used for several years (since then - one owner). Previously, it processed plastic, film, and cardboard - RDF after selective recycling. The approximate throughput for materials like the above (lightweight) is about 1-1.5 tons/hour. Other materials - to be checked/discussed. The machine was fully functional and is currently stored on site. Additional photos and video available upon request.

Condition: used, Year of construction: 2001, total length: 13,500 mm, total width: 4,500 mm, Equipment: documentation/manual, type plate available, For sale from the laundry. Complete, working Kannegiesser mangle line (pair). Working width: 3000 mm. Full technical documentation. Composition: 1. EMD feeder - universal, manual and automatic feeding, 2 feeder paw stations, stretching brushes and arms for lifting heavy elements. 2. HPM double-shaft mangle - 2 x Ø1200 mm shaft, stainless steel basin, good mangle quality. Additional option for gastronomy. 3. RFM reversible folder - precise folding with 2 longitudinal and 3 transverse folds, with an additional track for smaller elements. Stacker Ndodjv Nbxnepfx Ab Uob Year of production: end of 2001 Technical condition: as after taking over from the laundry, efficient, in use until the end of February 2025, regularly maintained. Required space: approx. 13 m × 4.5 m, Required power 39 kW Why is it worth it? - Kannegiesser brand – leader in the laundry ironing industry. - Easy availability of service and parts: service also in Poland. - High efficiency and precision: ideal for large quantities of flat laundry. - Price-to-capacity and quality ratio. A new one is worth over €400,000. Starting price: €69,900 net Do you have any questions? Do you want to know more? Contact us – we will be happy to provide additional information and send you technical details.

Condition: ready for operation (used), Year of construction: 2019, HEUFT ONE: Metal Detection and Code Verification Conveyor System Model Heuft HBBNXZ72 YOM 2019 High sensitivity to ferrous and non-ferrous metals Stainless Steel Construction Full Container Checking System (A4) The devices of the new HEUFT ONE series set new standards in terms of detection accuracy, operational reliability and price / performance ratio during an in-line quality inspection in a confined space, and celebrated their world premiere at interpack. The first metal detector and an inspection system for markings up to HEUFT standards can be experienced live at the trade fair. ONE for all: the new products make an affordable introduction to HEUFT cutting edge technology as particularly compact stand-alone devices which are extremely easy to integrate into packaging lines. They combine innovative detection technologies with customised hardware and software and proven procedures for a highly precise product tracking, inspection and fault rejection. Thus the compact complete solutions remove contaminated products and incorrectly marked packaging accurately; food safety has priority! Nsdjyq Rkyopfx Ab Uedb The HEUFT ONE for detecting metal achieves maximum detection accuracy with unique evaluation procedures from the HEUFT development department: it even finds minute pieces of metal in filled food packaging reliably – almost unaffected by the product effect of saline or acidic products and the influence of metal packaging components. Even special ambient conditions such as a "metal free zone" are not necessary for the reliable operation of the compact stand-alone device. The first HEUFT metal detector complements the portfolio of sophisticated systems, which identify all types of foreign objects, with a slim entry-level solution. It is ideal for all those who only wish to find objects made of iron, steel, aluminium or stainless steel first and want to achieve a detection and rejection reliability up to HEUFT standards. The new HEUFT ONE for code verification, marking and dress inspection also provides this during the high-resolution complete examination of food packaging with in-house developed colour sensor camera technology and real-time image evaluation. It detects best before and expiry dates, barcodes and 2D codes, article and serial numbers, imprints and lettering which have been incorrectly applied and are inaccurate as regards content – and that independent of their respective position. The same also applies to deviating logos as well as non-brand colouring and design elements. Proven HEUFT procedures also ensure the accurate removal of incorrectly marked products in this case. Full traceability, clear information about shelf-life and digestibility as well as an attractive appearance at the point of sale are thus always guaranteed. The solid, extremely compact construction in accordance with the hygiene-optimised HEUFT CleanDesign also makes the new HEUFT ONE devices stand out. They are straightforward to integrate into existing packaging lines even where space is limited. The HEUFT ISI bus ensures minimum wiring with the open, flexible assembly directly above the conveyor. Dispensing with change parts makes easy brand changes without mechanical changeovers possible and the organised user interface, which has been reduced to the essentials, ensures error-free operation. This together with continuous monitoring brings the metal detection and code verification in line with HEUFT standards.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, total length: 6,100 mm, gear diameter: 180 mm, total height: 3,500 mm, total width: 3,000 mm, input frequency: 50 Hz, milling length: 170 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 300 rpm, travel distance X-axis: 100 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 300 mm, overall weight: 8,400 kg, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, A high-performance machine for series production: the horizontal Gleason-Pfauter P 210 L, built in 2003, mills shafts, pinion shafts, and small gears up to module 4 and 180 mm in diameter at speeds of up to 4,000 rpm on the cutter and 1,000 rpm on the workpiece – designed for short cycle times and dry machining. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems with full spare parts and support availability. Modern Gleason-Pfauter kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, and we will inspect it together with you in Chemnitz. The horizontal design makes the P 210 L ideal for shaft machining: workpieces up to 830 mm are clamped between the spindle and tailstock, with 300 mm of axial travel and 100 mm of radial travel (center distance 30–130 mm). The milling head pivots by ±40°, and the tangential travel of 160 mm utilizes the full cutter length of 170 mm for long tool life. The high workpiece speed allows for multi-tooth hobbing cutters and thus the cutting performance required in the gearbox and automotive component supply sector. The machine is prepared for connection to a loading portal or a robot. Technical data: max. workpiece diameter 180 mm, max. module 4, working area radial 100 mm (30–130 mm), axial 300 mm (260–560 mm), tailstock 350 mm (480–830 mm), max. cutter diameter 180 mm, max. cutter length 170 mm, tangential travel 160 mm, cutter speed 300–4,000 rpm, max. workpiece speed 1,000 rpm, swivel angle ±40°, total connection value 50 kVA. Installation dimensions approx. 6.1 × 3.0 × 3.5 m, weight approx. 8.4 t. Njdpjz Et Rzofx Ab Ujdb The machine will be delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in an air-conditioned control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometry acceptance is carried out according to the manufacturer's standard or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: good (used), Year of construction: 2001, Atlas Copco SF 15 Oil-Free Scroll Compressor The SF series utilizes scroll technology, which involves no metal-to-metal contact between the compression elements; consequently, absolutely no oil is required in the compression chamber. This makes the system ideal for applications requiring completely clean and oil-free compressed air (e.g., in laboratory, medical, or food processing environments). The three installed scroll compression elements have recently been overhauled or replaced. Total operating hours: 15,983 hrs (actual running time of the compressor since 2001). Controller hours: 99,527 hrs (time the control system was powered on). Runtime of individual scroll elements (compression stages) Operating hours Element 1: 735 hrs Operating hours Element 2: 735 hrs Operating hours Element 3: 736 hrs Technical Data: Manufacturer: Atlas Copco Model / Product Type: SF 15 (Oil-Free Air) Serial Number: ATI 502157 Maximum Operating Pressure: 8 bar(e) Free Air Delivery: 24.7 l/s Rated Shaft Power: 14.8 kW Rated Shaft Speed: 1500 rpm Gross Weight: 590 kg Year of Construction: 2001 Control System: Elektronikon (digital display) Length: 1.21 meters Width: 0.96 meters Njdpjzwmd Usfx Ab Usdb Height: 1.66 meters "A one-stop solution: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Nedpfxotqu U Ts Ab Ujdb Trimming machine

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, rotary table diameter: 590 mm, table diameter: 590 mm, total length: 5,100 mm, gear diameter: 750 mm, total height: 3,240 mm, total width: 4,000 mm, input frequency: 50 Hz, type of input current: three-phase, milling length: 250 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 36 rpm, travel distance X-axis: 450 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 600 mm, overall weight: 12,000 kg, distance table to spindle center: 755 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: documentation/manual, The Liebherr LC 752 is one of the most widely produced hobbing machines in its class: rigid bed, robust milling head, and proven performance in the gear, drive, and supplier industries for spur and helical gears and shafts up to 750 mm in diameter. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control system with full availability of spare parts and support. Proven Liebherr kinematics, new electrical system, new drives, new safety technology: you get the performance of a new machine at a fraction of the price, with an eight-month delivery time, and acceptance testing is carried out in Chemnitz together with you. The machine mills spur and helical gears as well as shafts up to module 10, and in a reinforced version up to module 14. With an axis travel of 600 mm between the milling head axis and the table surface, even long pinion shafts can be securely clamped. The milling head swivels by ±50°, the milling head speed ranges from 36 to 360 rpm, the table rotates at up to 18 rpm for small numbers of teeth, and the tangential travel of 200 mm utilizes the full milling head length for long tool life. Ndodpfx Aoz Et N Rob Ujb Technical data: max. workpiece diameter 750 mm, table diameter 590 mm, distance between milling head axis and table axis 50–500 mm, distance between milling head axis and table surface 175–775 mm, max. module 10/14, max. milling head diameter 215 mm, max. milling head length 250 mm, tangential travel 200 mm, milling head speed 36–360 rpm, max. table speed 18 rpm, swivel angle ±50°. Installation dimensions approx. 5.1 × 4.0 × 3.24 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet manufactured in-house. The user-friendly interface makes setup and programming possible without in-depth G-code knowledge. Geometric acceptance is carried out according to the manufacturer's standard or DIN, with a protocol. The scope of delivery also includes the complete machine enclosure with safety technology according to the latest standards, a new coat of paint in RAL 5015/7035, a magnetic chip conveyor, circulating and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: used, Year of construction: 2007, functionality: fully functional, working width: 150 mm, planing height: 50 mm, spindle diameter: 40 mm, planing width: 150 mm, working height: 50 mm, - after technical inspection - German manufacture - year of manufacture: 2007 - equipped with Weinig EM 15 belt feeder TECHNICAL PARAMETERS: - planing width: 150 mm - planing height: 50 mm - spindle diameter: 40 mm - first bottom head: 11 kW at 6000 rpm Ndjdpow E I Ruefx Ab Uob - second top head: 22 kW at 7000 rpm - third bottom head: 5.5 kW at 6000 rpm - feed motor: 2.2 kW - feed speed adjustable via inverter - feed via cardan shafts - four upper steel feed rollers - one upper rubber outfeed roller - grooved table surface - infeed table length: 1000 mm - automatic central lubrication - feeding table length: 4700 mm - feed speed adjustable via inverter - hydraulic pressure rollers - total feeder power: 2.25 kW - machine dimensions (L/W/H): 790 x 200 x 190 cm - weight: 3200 kg

Year of construction: 2021, operating hours: 60 h, condition: good (used), functionality: fully functional, machine/vehicle number: X620DM-WL, We are selling a very good endoscope. As plant engineers, we used the device for endoscopic inspection of weld seams in piping systems. It delivers excellent image quality and is very easy to operate. Unfortunately, the 2-meter probe length is no longer sufficient for our needs, so we need to sell it and purchase a new one with a longer probe. The device is only 3 years old. Details from the order confirmation: Portable Video Endoscope VTec X Series Forward or side view, white light State-of-the-art CMOS camera technology Njdsu Ul A Nspfx Ab Uedb Bright high-resolution 5.5" monitor integrated into the handset Specifications: Probe diameter: 6.1 mm +0.1 Probe length: 2.0 m Viewing direction: 0° / 90° Depth of field: 7 - 80 mm / 3 - 30 mm Field of view: 100° / 90° Illumination: White light Front LED, 3.22 lm Side LED, 6.45 lm Camera resolution: Front: 1280 x 960 pixels Side: 1280 x 960 pixels Monitor resolution: 1920 x 1080 pixels Bending angle: ≤ 150° ±10 Bending functionality: Controlled via 4-way motorized joystick Power supply: Four Li-Ion batteries (18650) with protection circuit or via power adapter Environmental conditions, protection class, and weight: Handset: -10°C to +50°C, IP 54, 1.50 kg Probe: -20°C to +70°C, IP 67 Included in delivery: Video Endoscope VTec X620DM-WL SD-USB card reader HDMI cable Mini USB data cable including USB power adapter Battery charger including power adapter Power adapter Four Li-Ion batteries (18650) with protection circuit User manual Transport case Rigid Shaft Adapter with Handle for 6 mm Video Endoscopes Working length of shaft: 350 mm Includes mount for 1/4" tripod thread

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Ndedpfszxxifsx Ab Ueb Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Ndedpszy Hhxsfx Ab Usb Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, table diameter: 170 mm, total length: 3,200 mm, gear diameter: 250 mm, total height: 3,000 mm, total width: 2,600 mm, input frequency: 50 Hz, workpiece diameter (max.): 250 mm, type of input current: three-phase, milling length: 300 mm, spindle speed (max.): 600 rpm, spindle speed (min.): 75 rpm, travel distance X-axis: 190 mm, travel distance Y-axis: 240 mm, travel distance Z-axis: 700 mm, overall weight: 12,000 kg, distance table to spindle center: 900 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, The WF 250 is the classic machine for gear cutting in the gearbox, drive, and supplier sectors: compact, rigid, and quickly retoolable. Serwema Retrofit Solutions, Chemnitz, completely overhauls the machine and delivers it with Siemens Sinumerik ONE, the latest generation of control systems, ensuring full availability of spare parts and support. Proven Hurth module kinematics, new electrical systems, new drives, new safety technology: you get the performance of a new machine at a fraction of the price – inspected in Chemnitz, together with you. Nsdpfx Aboz Et A Rs Uodb The machine mills spur and helical gears, as well as shafts, up to a module of 6 and a workpiece diameter of 250 mm. With an extended stand and counter-stand, long shafts and pinion shafts with a distance of up to 900 mm between the cutter axis and the table surface can be securely clamped. The milling head pivots by ±55°, the cutter speed ranges from 75 to 600 rpm, and the tangential travel of 240 mm utilizes the full cutter length for long service life. Technical data: max. workpiece diameter 250 mm, table diameter 170 mm, distance between cutter axis and table axis 40–230 mm, distance between cutter axis and table surface 200–900 mm, max. module 6, max. cutter diameter 175 mm, max. cutter length 300 mm, tangential travel 240 mm, cutter speed 75–600 rpm, swivel angle ±55°, total connection value 40 kVA. Installation dimensions approx. 3.2 × 2.6 × 3.0 m, weight approx. 12 t. The machine is delivered with a new Siemens Sinumerik ONE control system and Sinamics S120 drives in a climate-controlled control cabinet of our own manufacture. The user-friendly interface enables easy setup and programming without in-depth G-code knowledge. Geometry acceptance is carried out according to manufacturer standards or DIN with a protocol. The scope of delivery also includes the complete machine enclosure with state-of-the-art safety technology, an extended stand and counter-stand, a new paint job in RAL 5015/7035, a magnetic chip conveyor, circulation and loss lubrication, a hydraulic unit, a coolant system, and the operating manual.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 2,650 mm, total length: 4,100 mm, total width: 2,420 mm, feed length X-axis: 1,190 mm, feed length Z-axis: 390 mm, workpiece weight (max.): 525 kg, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 1,600 m/min, feed rate Z-axis: 2,000 m/min, table speed: 30,000 mm/min, spindle speed (max.): 4,000 rpm, overall weight: 5,400 kg, grinding spindle motor power: 37 W, travel distance X-axis: 1,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 400 mm, Equipment: documentation/manual, rotational speed infinitely variable, ELB Smartline, fully functional, available for sale due to business closure. Please refer to the machine description for technical details. Ndodpfjz Dabwsx Ab Ujb Additionally, oil mist separator, original packaging.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Leadermac SMARTMAC LMC 523S Four-Sided Planer Manufacturer: Leadermac, Taiwan S/N 092323 Year of Manufacture: 07/2003 Nsdpfx Aewft Ufjb Usdb In good condition Working width: 230 mm Working height: 125 mm 5 spindles, spindle diameter: 40 mm Feed table: 2000 mm Configuration: 1st lower horizontal spindle: 7.5 kW 2nd right spindle: 5.5 kW 3rd left spindle: 5.5 kW 4th upper horizontal spindle: 7.5 kW 5th lower horizontal spindle: 7.5 kW Continuously adjustable feed rate up to 24 m/min 3 kW feed motor Electronic height adjustment Electronic adjustment of the left head Feed on cardan shafts Five upper steel rollers Two upper rubber rollers One roller in the table top feed Pneumatic material pressure Minimum material length: 400 mm mm Chrome tables Chamber diameter 5 x 125 mm Machine dimensions L x W x H = 370 cm x 200 cm x 190 cm Weight 3500 kg CE marking

Year of construction: 2024, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Ndedpfx Aoyvrvpsb Ujb Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: new, functionality: fully functional, Year of construction: 2026, Product overviews of Waste Industrial Timber Wood Pallet Double Shaft Shredder Shredders can generally be used to shred hard-to-break plastics, rubber, large tires, large nylon materials, large pieces of fishing nets, fibers, paper, wood, electrical devices, cables, PET bottles, cardboard, wood, plastic barrels, etc. Solid objects. The main function of the equipment is to squeeze the bulk materials and large-diameter drum metal materials that are not convenient for transportation through the shear of the shredder, and shred them into sheets that meet the requirements. The main structure of the double-shaft shredder is a feed hopper, a knife roller, a driving device, a bearing, a hydraulic system, and an electric control box system. Working principle: All kinds of waste materials enter the shredding chamber through the feeding hopper. The double-knife rollers do relative rotation to shred and cut the materials, and then the materials are discharged from the shredder to achieve the shredding of large pieces of materials. Applicable materials and fields Double shaft shredder is one of ethential equipment for waste recycling in following fields and materials: +Bulky Waste: Sofa,Mattress,Chair, Funiture,Windows,etc Nsdpfevn D I Njx Ab Uodb +Industrial Waste: Textiles,Leather,Rubbers, Leathers ,General industrial waste,etc +Hazardous Solid waste: Medical waste,Paint sludge,Radioactive waste,Hazardous waste oil drum,Jumbo bag,etc +Paper waste: Carton,Cardboard,Book,Newspaper,Document,Brochure,Packaging paper,etc +Garden waste: Branch, Wood pallet, Trunks, Boards,etc +Domestic waste +Biomass straw: Straw, Bamboo, Corn, Sorghum straw, Bean straw, Fruit shell, Palm shell, etc +Scrap metal: Car Shell, Aluminum casting, Household appliances, Scrap light metal,Automobile hub,etc +Paper mill waste: Paper mill slag, Paper mill rope, Paper mill offcut,etc +Wood pallet, scrap furniture, waste chair, tree roots recycling, etc. Double shaft shredder main body: The main body is welded with excellent steel plate to ensure the stability of the equipment under heavy load for a long time. Bearing: The bearing seat is split and easy to disassemble, and the movable knife, fixed knife, bearing and other parts can be quickly removed, and it is easy to maintain and replace the knife. The sealing structure can avoid the contact of broken materials and grease, and can also protect bearings and gears when handling liquid materials.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive • Proven Felder quality machine • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment Ndsdpjzwnmqsfx Ab Ueb • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm

Condition: good (used), Year of construction: 2019, functionality: fully functional, New price including transport and installation approx. €850,000 net. The machine was professionally disassembled by qualified technicians and subsequently stored. An inspection at the location in the Netherlands is possible after prior appointment. Technical data: Manufacturer: SCM Stefani Type: One 108 Cell Year of construction: 2019 Operating hours: approx. 5,600 Feed speed: 10–40 m/min Maximum speed with pickback: 30 m/min Workpiece length: approx. 250–3,000 mm Workpiece width: approx. 130–1,200 mm Workpiece thickness: 10–60 mm Maximum workpiece weight pickback: 80 kg Machine length edge banding machine: approx. 11,550 mm Installation area of the complete cell according to layout: approx. 30,270 × 13,166 mm Working height: approx. 970 mm Connection: 400 V / 50 Hz with neutral conductor Workpiece feed: Motorized feed roller table Easy Order BN+ automatic workpiece feed Automatic alignment for longitudinal and transverse processing Servo-controlled workpiece centering Automatic adjustment to different workpiece dimensions Large lateral workpiece support Edge and glue system: Nordson AltaPUR 4HO PUR hot melt unit Melt-on-demand technology Melting capacity up to approx. 6 kg/h SGP glue reservoir with CNC-controlled glue metering Additional interchangeable SGP glue reservoir Separate preheating trolley for one glue reservoir Workpiece edge preheating Automatic positioning of the edge guide and pressure rollers 12-position vertical edge magazine with automatic edge changing Processing of roll material up to 3 mm Designed for thin edge, 20° bevel, and radii R1, R1.5 and R2 Machining units: Pre-milling unit RT-H/RT-X with 2 × 4 kW Electronic positioning of the pre-milling unit Trimming unit YU/SP-1000 with automatic saw blade inclination Flush-cutting and pre-milling unit R-E CNC-controlled RSU-E Hi-Drive Multiedge fine milling unit Processing of thin edge and R1, R1.5 and R2 Round 4 four-motor corner rounding unit Ndsdpfx Aboz Aquho Ueb Automatic selection of four profiles MX80 HSK milling unit with 10 kW CNC-controlled horizontal and vertical positioning Automatic pivoting from 0–90° Suitable for continuous or recessed grooves on the top, bottom and workpiece edge CNC-controlled RCS-E Multiedge radius drawing blade unit Edge sanding unit GT with oscillating sanding belt Two glue seam drawing blade units RCA/2C Polishing unit SP/F with oscillating Riepe polishing pads Spraying devices: Release agent spraying device at the machine infeed Antistatic and coolant spraying device Spraying device for sensitive or foiled edges Cleaning agent spraying devices for the glue seam drawing blades Spraying device for the first pressure roller Automatic pickback return: Gantry return system with three servo-controlled axes Workpiece pick-up via vacuum gripper Automatic rotation by 0°, 90°, -90° and 180° Automatic return to the machine infeed Up to 10 return cycles per minute without rotation Up to 9 return cycles per minute with 90° rotation Motorized conveyor belts Additional second unloading station Central control via the machine control system Location: Netherlands Inspection: possible after prior appointment Condition: professionally disassembled and stored Availability: short notice Price: on request The technical data were compiled based on the available original documents. Errors, changes and prior sale are reserved.

Condition: used, Year of construction: 2018, functionality: fully functional, ROUNDWOOD PROCESSING LINE Line supplied by MSK a.s. in 2018, supplemented with a vertical band saw from J. Bögli AG. The line was built in 2018. The band saw is older, but its exact year of manufacture is not known. The band saw can process logs with diameters from 30 cm to 100 cm; the maximum log length is 10 metres. The line itself is designed for a maximum length of 5 metres. When longer logs are sawn, they can be discharged from the band saw via conveyors No. 15 and No. 16. The cant cross-cut saw has a minimum cutting length of 800 mm and a maximum length of 5 metres. The twin-shaft multi-rip saw has a maximum cutting height of 215 mm and a maximum width of 600 mm. In 2024, the line was supplemented with a Skywood twin-shaft circular saw for processing small-diameter logs from 12 cm to 46 cm. Log length: minimum 2 m, maximum 5 m. The line can operate in parallel (band saw and Skywood) or independently with either one of these machines. Required staffing for line operation: Band saw 1 Skywood 1 Cant cross-cutting 1 Multi-rip saw 2 Nodpjzta Ifjfx Ab Usdb Cross-cutting, edging and sorting of side boards 2-3 JCB / forklift 1

Condition: good (used), Year of construction: 2019, functionality: fully functional, For sale is a high-quality, all-in-one winter combination machine, type 5K 310-2600, manufactured in 2019. This machine combines several processing units in a compact design and is ideal for carpentry workshops, joineries, and demanding woodworking applications. The technical data has been taken from the nameplate. Technical data Manufacturer: Winter Holztechnik GmbH Type: 5K 310-2600 Year of manufacture: 2019 Machine no.: 201904001 Weight: approx. 575 kg Voltage: 400 V / 3 phases / 50 Hz Jointer and Thicknesser Motor power: 2.8 kW Planing width: 310 mm Knife shaft Ø: 70 mm 3 knives Knife shaft speed: 4,800 rpm Removal rate (jointing): max. 4 mm Removal rate (thicknessing): 2 mm Feed speed: 6 m/min Jointing table: 1,380 × 310 mm Thicknessing table: 540 × 306 mm Max. feed height: 235 mm Sliding Table Circular Saw Motor power: 3.8 kW Saw blade Ø: 315 mm Ndodjzfilwjpfx Ab Usb Main saw blade speed: 4,500 rpm Cutting width with parallel fence: up to 860 mm Sliding table: approx. 1,260 mm Blade tilt: 90°–45° Spindle Moulder Motor power: 2.8 kW Spindle diameter: 30 mm Working height: 100 mm Speeds: 1,800 / 3,000 / 6,000 / 9,000 rpm Mortising Machine Drill chuck: 16 mm Drill stroke: 140 mm Table size: 500 × 210 mm Max. workpiece length: 1,250 mm Equipment Spindle Moulder Jointer and Thicknesser Mortising Machine Sliding table Angle and parallel fence Compact multi-function machine for space-saving work Transportation possible for an extra charge! Note The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: reconditioned (used), Year of construction: 2026, operating hours: 100 h, machine/vehicle number: BMWF241003, Professional Rebuild and Retrofit of Heavy CNC Lathes: Niles, Weiler, Gildemeister, TOS, TURMN The offer is for a TUR MN 560 CNC lathe. Max turning diameter: 560mm, max turning length: 960mm. Equipped with a 4-position Sauter turret. All wear parts have been replaced; the machine has been repainted and retrofitted with a new Siemens 828D. We specialize in restoring full operational capability and performing digital modernization of heavy machine tools that form the foundation of rigid and efficient production. We combine the legendary durability of heavy cast iron with state-of-the-art Industry 4.0 control systems. Why choose our retrofitted machine? Performance of a New Unit at 50% of the Price: We offer machines with the performance and accuracy of new machining centers at a fraction of the cost of a new investment. Unrivaled Rigidity: We rely on proven machine bases from brands such as Niles DFS 4 (slant bed, 17 t weight) or TOS SUA (load capacity up to 8 tons), which outperform modern, lighter designs in terms of vibration damping. Modern CNC Heart: We install the latest systems (Siemens Sinumerik ONE / 840D sl / 828D), ensuring full availability of spare parts, remote diagnostics, and ease of programming. ​ ​ Warranty and Support: Every machine after complete mechanical overhaul (DIN 8605 accuracy class) and electronic retrofit is covered by a 12‑month warranty. Our specializations: Niles DFS 3/4: Comprehensive rebuilds of multi-axis centers (C, Y, B) for the most demanding applications. Weiler E Series: Restoring legendary precision and intuitive cycle operation for premium toolrooms. Gildemeister NEF 710: “Smart Retrofit” of the control system, giving a second life to these reliable German designs. TOS SUA 80/100: Complete overhauls for the heaviest shaft and large-part machining. TURMN 630/800/1100: General overhauls and “Smart Retrofit” CNC control upgrades. Our offer goes beyond selling ready-made machines. We provide full flexibility and consulting throughout the investment process: Purchase on Request: At the customer’s request, we search for the optimal machine base on European markets (e.g. Germany, Italy, Poland). We use our experience in evaluating “dead CNC” machines to buy units at a price close to mechanical scrap value, while preserving their full potential for rebuild. Ndodpfxjv R Dlys Ab Usb Evaluation and Pricing of Market Machines: If the customer finds a machine independently, we offer a professional mechanical inspection (bed geometry, spindle play) and preparation of a detailed cost estimate for overhaul and retrofit. Overhauls of Customer-Owned Machines: We carry out complete modernization of machines already installed in the customer’s machine park.