Used Nsv 90 for sale (10,673)

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 750 mm, overall weight: 460 kg, warranty duration: 24 months, tank capacity: 90 l, water tank capacity: 90 l, battery voltage: 24 V, noise level: 69 dB, We offer a new Ride-On Scrubber-Dryer B 90 R Classic Bp with D75 Disc Brush Head for sale. All equipment purchased from us is covered by a 24-month WARRANTY. Technical specification: Nedjwz Nz Topfx Akfjcr • Drive type: Battery powered • Traction drive: Traction motor • Working width (brushes): 750 mm • Working width (suction): 940 mm • Water tank capacity (clean/dirty): 90/90 l • Battery voltage: 24 V • Maximum battery run time: 3.5 h • Brush pressure: 20 – 315 / 28 – 37 g/cm² / kg • Water consumption: 3.5 l/min • Sound pressure level: 69 dB(A) • Rated power: 2200 W • Permissible total weight: 460 kg • Dimensions (L x W x H): 1450 x 800 x 1200 mm Equipment included: • 6V 180Ah Gel Batteries x4 • Squeegee bar • 2x Red disc brushes • Battery charger A working width of 750 mm ensures high performance and effective cleaning of large areas in less time. The control panel is clear and user-friendly, making daily operation intuitive even for new users. A 90-liter tank allows a large amount of cleaning solution to be loaded at once, minimizing the need for frequent refilling. Thanks to its compact design, the device offers excellent maneuverability—the small turning radius enables efficient operation even in narrow corridors and confined spaces.

Condition: new, Year of construction: 2025, neu 2025 090120 prompt, Zwischenverkauf v Türkei 7100 € 137.03 € 1 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm Nodpfx Akewira Iefocr 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll HARDENED ROLLS tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Year of construction: 2006, condition: like new (used), functionality: fully functional, Zum Verkauf stehen 3 pH-Controller für Dosieranlagen des Herstellers Dosatronic. – geeignet für pH-Regelung und chemische Dosiersysteme – industrielle Ausführung – unbenutzt (Lagerware / New Old Stock) Die Geräte stammen aus einem industriellen Lagerbestand und wurden nie installiert. Geeignet für: – Wasseraufbereitung – Schwimmbadtechnik – Chemische Industrie – Lebensmittelproduktion Zustand: Unbenutzt, jedoch länger gelagert. Funktionsprüfung nicht durchgeführt. Verkauf einzeln oder als Komplettpaket möglich. Preis: 390 € / Stück oder 1.050 € für alle 3 Nsdjyw Riqopfx Akfscr Standort: Slowakei (EU) Versand europaweit möglich For sale: 3 pH controllers for dosing systems (Dosatronic) – suitable for pH control and chemical dosing – industrial version – unused (new old stock) The units come from industrial stock and were never installed. Suitable for: – water treatment – swimming pool systems – chemical processing – food industry Condition: Unused, long-term storage. Functionality not tested. Available individually or as a lot. Price: 390 € per unit or 1,050 € for all 3 Location: Slovakia (EU) Worldwide shipping possible

Condition: like new (used), Year of construction: 2019, Fire safety cabinet S-CLASSIC/Type 90, asecos – used: Ex-location price: €1,350 (net) Manufacturer: asecos Model: S.Classic-90, WDASL Series: S Year of manufacture: unknown, likely 2019 Item no.: 30239 Dimensions: approx. width 60 cm, depth 57 cm, height 1.44 m Condition: very good – still in original packaging Available: immediately Ncsdpfjyrqyqsx Akfsr Location: Erfurt, later warehouse Augsburg

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 6400 € 123.52 € 1270 mm 2.5 mm 90 mm Nedpfx Aksynm D Djfocr 6 m/min 1.1 kW 1850 mm 700 mm 1200 mm 520 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN or ENGLISH

Condition: refurbished (used), Year of construction: 1994, working width: 240 mm, planing height: 160 mm, planing width: 240 mm, working height: 160 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, rotational speed (max.): 6,000 rpm, rotational speed (min.): 6,000 rpm, workpiece height (max.): 160 mm, compressed air connection: 6 bar, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, input current: 111 A, We are offering this fully overhauled OTTO MARTIN T 90 planing and profiling machine, year of manufacture 1994. Model: T 90 Nodpfx Aksyq D Ifjfocr Serial number: V 215410 Year: 1994 Working width: 240 mm Working height: 160 mm Speed: 6000 rpm Voltage: 400 V Frequency: 50 Hz Number of phases: 3 ~ Rated current: 111 A Operating pressure: 6 bar If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 45/90 rpm -Power: 0.45/0.6 kW -Design: B3 -Shaft diameter: 25 mm -Protection class: IP 33 Nodpoc U I Emofx Akfjcr Quantity: 1 piece available -Dimensions: 415/200/210 mm -Weight: 20.3 kg

Condition: new, Year of construction: 2026, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Nodpfjkqz H Dsx Akfecr

Condition: new, Year of construction: 2026, Aluminium Circular Saw UK 600 HA 90°, Semi-Automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile materials made of cast aluminium, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its easy operation and quick, convenient material changes. This model only allows for 90° cuts! The saw feed operates automatically at the press of a button, and material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard features include a minimum quantity lubrication system and an air spray gun for machine cleaning. This machine is equipped with connections for a chip extraction system. Additionally, it can be optionally fitted with a digital mitre angle display, a layout laser, and pneumatic lifting for the protective hood. Equipment: - Large support table, high-performance drive motor - Two-button control for initiating the sawing process (optional single-button control available) - Intuitive control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydro-pneumatic saw blade lifting with oil level indicator - Fixed material back jaw can be moved rearwards to increase cutting capacity - Large protective hood covers the entire working area - Minimum quantity lubrication system with 2-litre reservoir - Adjustable saw blade feed speed - Air gun for machine cleaning - Saw blade diameter: 600 mm Work Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust lift speed 4. Bring clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the start button – the machine is ready for operation 7. Press and hold both SAW buttons to initiate cutting 8. After cycle completion, release SAW buttons and press the STOP button 9. Open the clamping fixture and remove or advance the material For technical data such as cutting range, performance, etc., please refer to the data sheet in the email attachment. Ncjdopa Nxdjpfx Akfor We look forward to your inquiry! Plantec Maschinen GmbH

Condition: used, spindle diameter 102 mm Nedpfxeyqvmao Akfocr x-travel 1600 mm y-travel 1250 mm z-travel 1600 mm spindle taper ISO 50 bore spindle stroke 710 mm main drive motor 11 kW turning speeds 1600 U/min Feed 4000 mm/min Control Heidenhain type TNC 135 T-slot - width 22 mm T-slot - distance 140 mm table surface area 1250x1400 mm Table load 2500 kg total power requirement 23 kW weight of the machine ca. 9,3 t Rotating table 360° The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Pad printing machine TampoPrint rapid 2000/90 Manufacturer: TampoPrint AG Ncedpfx Ajytp Trskfjr Model: rapid 2000/90 Machine type: Pad printing machine Series: rapid 2000 Country of manufacture: Germany Control: integrated electronic machine control Control panel: digital control panel with display Emergency stop switch: present CE marking: present Location: Freiburg

Condition: excellent (used), CTS CW-60/11 – Water-Cooled Climatic Test Chamber The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for performing temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber allows testing of the function or material properties of a test object under the influence of temperature and humidity. Excellent air circulation with a correspondingly high recirculation volume ensures effective transfer of conditions onto the test object. The air-handling compartment is located at the rear of the interior chamber. The aggregates are positioned behind the unit in a separate frame, providing easy access. The control system is housed in a separate control cabinet, with the control panel installed in the cabinet door. For dehumidification of the test chamber, the unit is equipped with a self-regenerating compressed air dryer. Fresh air can be flushed into the chamber via a blower. Technical Specifications: Temperature Testing: - Temperature range: –60°C to +90°C - Temperature deviation: ±0.5 to 1 K (over time) - Spatial temperature deviation: ±1 K at 200 mm from the wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40°C to +85°C - Cooling: 2 K/min from +85°C to –40°C Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10% to 95% RH - Dew point range: +5°C to +89°C - Temperature deviation: ±0.5 K (over time) - Humidity deviation: ±2 – ±5% RH (over time) - No heat irradiation - Stabilized conditions Technical data relate to an ambient temperature of +25°C, rated voltage 400 V, without test objects, without irradiation, and without additional equipment. Dimensions: Interior (Test chamber / usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2,100 mm / Depth: 2,530 mm / Height: 2,200 mm (slight variations depending on configuration) External dimensions: - Width: 2,700 mm / Depth: 5,200 mm / Height: 2,520 mm (variations possible depending on door type, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz Nedpfx Aex Anipjkfocr - Rated current: 131.4 A Technical design: - Refrigeration unit: Water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system, environmentally friendly refrigerants R23 / R404A - Weight: 6,000 kg Notes: - Inspection/viewing possible by arrangement (46325 Borken) - Shipping by carrier is possible – costs and arrangements on request - Scope of supply: (see picture) - (Changes and errors in the technical data reserved; all information is subject to change!) If you have any further questions, please feel free to contact us by phone.

Condition: excellent (used), Suspension clamp, helmet rail holder, helmet rail, running rail, rail holder -Manufacturer: Helm, suspension clamp, rail holder, galvanized yellow -Type: 1508 -Dimensions: see photos Ncsdpfowca D Iex Akfor -Quantity: 64 pieces available Price: per set -Dimensions: 90/70/H135 mm -Weight: 1.3 kg/set

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), color: other, Year of construction: 2026, Equipment: ABS, CONSTMACH jaw crushers are designed to offer high durability and superior crushing performance, making them ideal machines for primary crushing operations in quarries and mines. They have the capacity to process a wide range of materials, from the softest limestone to the hardest types of granite and basalt. Their robust construction, high flywheel torque, and special jaw geometry ensure high-efficiency crushing of material into uniform sizes. The advanced hydraulic adjustment mechanism allows for easy adjustment of the desired output size and minimizes operator intervention. CONSTMACH jaw crushers ensure long-lasting use with their forged chrome-nickel steel pitman structure, heavy-duty bearings, and automatic lubrication systems. The welded main frame, which has undergone thermal stress relief treatment, maintains maximum durability even under high vibration. The user-friendly maintenance design provides an uninterrupted and safe working environment during production processes. These machines can be integrated into stationary or mobile crushing plants, offering high flexibility for projects. CJC-90 Technical Specifications Mouth Size: 900 x 650 mm Motor Power: 75 kW Shaft Speed: 277 rpm Weight: 11,400 kg Min./Max. Adjustment: 50 - 150 mm Production Capacity: 90 - 270 t/h Why Choose CONSTMACH Jaw Crushers CONSTMACH is a symbol of quality and reliability in crushing and screening technologies. Each jaw crusher model undergoes production processes that comply with international standards, ensuring maximum performance, low operating costs, and a long service life. With customizable design options tailored to customer needs and an extensive service network, it supports your business's uninterrupted production goals. In terms of reliable performance, engineering quality, and after-sales technical support, CONSTMACH is the right choice for crushing systems. Nedpfxoxqf Sws Akfscr What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Year of construction: 2006, condition: ready for operation (used), Manufacturer: Wittmann Model: TP-PLUS -2:90 Njdpfxeyk Uwke Akfocr

Year of construction: 2008, condition: ready for operation (used), Manufacturer: Wittmann Nsdpfx Akeyk Uvmjfjcr Model: TP-PLUS -2:90

Condition: ready for operation (used), Year of construction: 2007, Manufacturer: Wittmann Nedpfxoyk Uiye Akfscr Model: TP-PLUS-2:90

Year of construction: 2004, condition: defective spare-parts repository (used), Manufacturer: Wittmann Ncjdeyk Tnnspfx Akfor Model: TP-PLUS-2:90 Incomplete

Year of construction: 2006, condition: ready for operation (used), Manufacturer: Wittmann Model: TP-PLUS -2:90 Nsdpfjyk Tmqsx Akfecr

Year of construction: 2006, condition: ready for operation (used), Manufacturer: Wittmann Nedpfx Ajyk Tfyokfecr Model: TP-PLUS -2:90

Condition: good (used), Year of construction: 2009, operating hours: 70,171 h, functionality: fully functional, clamping force: 900 kN, screw diameter: 22 mm, displacement volume: 38 cm³, ENGEL VICTORY 80-90 tech Stock No.: 503415 Manufacturer: ENGEL Type: VICTORY 80-90 tech Control: CC200 Year of manufacture: 2009 Operating hours: 70,171 h Technical Data – Clamping Unit Clamping force: 900 kN Platen size (HxV): 740 x 680 mm Minimum mould height: 300 mm Max platen daylight: 800 mm Opening stroke: 500 mm Ejector stroke: 130 mm Ejector force: 40 kN Movable platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Technical Data – Injection Unit Screw diameter: 22 mm Shot volume: 38 ccm Injection pressure: 2,060 bar Screw L/D ratio: 19 l/d Screw stroke: 100 mm Screw speed: 360 min⁻¹ Free flow rate: 78 g/s PS Number of heating zones: 4 Ncsdpfxjytfcce Akfsr Nozzle stroke: 230 mm Dimensions & Weight Machine dimensions (LxWxH): 4.4 m x 1.5 m x 2 m Total weight: 6,700 kg Equipment Display language: German CEE socket 16A 1x hydraulic core pull 2x air valves Machine with water battery Machine without material hopper Levelling elements Schuko socket 10A 4x mould heating circuits

Condition: used, functionality: unexamined, overall weight: 210 kg, input frequency: 50 Hz, For sale: Ncedpfx Ajyuqu Hskfsr Koppens 90-degree wire mesh curve Type: RT90-8 1000T; 380V; 50Hz; 0.059A; 210kg Machine no.: RT90-8/1000R-258 Netherlands; Tetra Laval Food Koppens Net price: €1200 (negotiable)

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: Ncedpfx Aouwv H Tokfor -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, grinding diameter 350 mm grinding length 1000 mm centre height 175 mm dimensions of the machine ca. 3,6/3,5 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your is: Kellenberger Kel-Varia Baureihe mit Kelco 90 Steuerung. Mechanische Überholung: -komplette Maschine nach Kellenberger Messprotokoll überholt -Neue servicefreundliche Kabine -Neulackierung Elektrische Überholung: -Neue moderne CNC-RUNDSCHLEIFMASCHINEN-Steuerung -Neu aufgebauter Schaltschrank -Neue Antriebstechnik -Austausch sämtlicher elektrischer Leitungen Berus Druckschalter etc. -Neue Absolut-Glasmaßstäbe in x- und z -Neuer Absolut Drehgeber (Bei-B-Achse) Nedpfx Aeuwv H Hekfjcr Standardausstattung: -WSS mit Konus MK5, optional mit Adapter MK5/Kurzkegel -RST mit MK4 Konus. Optional mit Feinverstellung -Schleifspindelstock T1/T2/T3 -T1 Schleifscheibendurchmesser 400mm -T2 Schleifscheibendurchmesser 300mm -T3 Innenschleifeinrichtung riemengetrieben. -Schleifspindelmotor 4,4kW -B-Achse hochauflösend -Marposs Messsystem zur Schleifscheibenvermessung. -Längspositionierung Marposs -GAP Control (Sensor am Schleifspindelstock) Optionen gegen Aufpreis: -HF Innenschleifspindel -Hochgenauer, höchst kippsteifer Werkstückspindelstock -Messteuerung Die Werkzeugmaschine entspricht zum derzeitigen Zeitpunkt nicht den grundlegenden Sicherheits- und Schutzanforderungen wie in der BetrSichV 2015 genannt. Eine Anhebung des erforderlichen Mindest-Schutzzieles ist mittels einer Gefährdungsbeurteilung nach BetrSichV zu ermitteln.

Condition: used, Year of construction: 2015, functionality: unexamined, Hettich 5005-90 - Centrifuge without container (see photo) Ncsdpfxjw E Hkms Akfjr - Shipping possible at extra cost