Used O Wire Punch for sale (57,903)

Condition: used, Year of construction: 1994, table length: 1,780 mm, table width: 1,250 mm, pressing force: 320 t, High-performance mechanical punching press with coil line for strip material processing in series production. Manufacturer: Kaiser Pressen Model: KSTU 3150-15 R Hfsdpfxsy Ndyas Acbog Machine type: Punching press Year of manufacture: 1994 Press force: 3150 kN Drive type: Mechanical Stroke rate: 20 – 120 spm Ram stroke: 20 – 150 mm Ram adjustment: 150 mm Table area: 1780 x 1250 mm Ram area: 1500 x 1000 mm Shut height: 565 mm Max. tool weight: 3000 kg Strip width: 30 – 800 mm Strip thickness: 0.5 – 3 mm Max. strip thickness: 4 mm Strip entry height: 160 – 260 mm Strip speed: 4 – 30 m/min Straightening rolls: 9 pcs Feed accuracy: ± 0.1 mm Coil inner diameter: 508 mm Coil outer diameter: 1000 – 1500 mm Supply voltage: 3 x 400 V Air pressure: 5 bar Location: Radeberg

Condition: new, Year of construction: 2022, pressure 55 t stroke 37 Min./20 mm throat 500 mm Hedpfx Acowp Tcqsbjfg stroke max. 60 mm work height max. 1060 mm total power requirement 5 kW

Condition: used, Year of construction: 2007, Travel distance: Hfjdpfx Asuu Dl Rocbeg X 500 mm Y 350 mm Z 300 mm Water bath machine Automatic wire threader

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Hfsdoy R Npcspfx Acbeg Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers. Hodpjygm Akefx Acbofg

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Hfsdpfxsy Ra D De Acbeg Vice clamping width 100 mm Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition

Condition: good (used), Manufacturer: LVD STRIPPIT Type: Global 20 FANUC Control: FANUC 180i-P Year of manufacture: 2006 Thick turret WILSON tool system Under power inspection possible Large package tooling WILSON Auto indexing rotation tools included Laser safety guids included Specifications Metric US standard Table load 150 Working area X axis 2500 mm Working area Y axis 1250 mm Working area X axis with takeover 5000 mm Punching force 20 T Max. sheet thickness 6 mm Turret positions 30 Auto index. positions 4 Positioning speed X and Y axis Hjdpfx Acsv Ic Tqjbsfg 4500 mm/min. Turret change speed 900 rpm Dimensions (estimate) Length 6400 mm Width 5600 mm Height 2445 mm Weight 16500 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Hedpjlz Rvljfx Acbefg Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2004, CNC lathe IRLE - IWDS 1000 CNC Hfedjpdp N Iepfx Acbeg MACH-ID 7758 Make: IRLE Type: IWDS 1000 CNC Control: SIEMENS 840D Year: 2004 Double carriage with 4 position revolver and 840D Siemens Steady rest 200 - 1090 mm Roller rest 860 - 1090 mm 4 chuck 1350 mm Clamping from 200 - 1100 mm Bed width 2000 mm Stoke X Axis 950 mm Stroke Z Axis 14900 mm Specifications Metric US Standard Swing over bed Ø 1400 mm Swing over cross slide Ø 1100 mm DBC Turning Length 13000 mm Spindle power 129 kW Workpiece weight 20000 Speeds / ranges 1 - 300 Rpm Feed rate X-Axis 4500 mm/min. Feed rate Z-Axis 4500 mm/min. Dimensions (Estimate) Length 20000 mm Width 3380 mm Height 2200 mm Weight 100000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2013, Manufacturer: Pro King Type: LC 450 Control system: Fanuc Oi-TF Year of construction: 2013 Specifications: Metric Metric US Standard Max. turning diameter 1135 mm X-axis 560 mm Z-axis 2000 mm Spindle bore 153 mm spindle speed 700 rpm Spindle power 37 kW Tool changer 12 Chip conveyor Yes Quill holder 6 Mk Quill Ø 235 mm Dimensions (estimate) length 6500 mm width 3200 mm height 2900 mm weight Hodpfxotwlm No Acbjfg 15000 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Hsdjyhb D Ejpfx Acbsfg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Conveyor belt rollers: transport rollers diameter 56 mm -Transport width: 335 mm Hodpfxsphupmo Acbsfg -Shaft: recording M8 -Quantity: 17x transport rollers available -Price per piece -Total dimensions: Ø 56 x 345 mm -Weight: 2.6kg/piece

Condition: good (used), Chuck flange, flange mount, lathe chuck flange, driving flange, intermediate flange, lathe chuck face plate, mounting flange -Chuck flange: mounting flange -Outside: Ø 198 mm -Bolt circle: Ø133 mm / M12 -Hole: Short taper 6, cone Ø 102 - 105 mm -Dimensions total Ø 198 x 55 mm -Weight: 4.0 kg Hfodpfxowcd A Ie Acbjg

Condition: good (used), Year of construction: 1985, FOR SALE: Hedpoy Shgpsfx Acbjfg Automatic Stamping and Bending Machine BIHLER RM-30 High-performance equipment for the automatic production of complex metal parts from wire or strip material. Identification and Brand Brand: BIHLER (Otto Bihler Maschinenfabrik, Germany). Model: RM-30. Year of manufacture: 1985. Machine number: 23589. Technical Specifications (Model RM-30) Maximum strip width: 32 mm. Maximum wire diameter: 3 mm (mild steel). Feed length (standard): Up to 120 mm. Nominal press force: 70 kN (7 tons). Production speed: Adjustable, up to 350 parts/minute (depending on complexity). Number of slides: Up to 5 standard bending units. Equipment and Configuration Control system: Separate control panel with user interface. Kinematics: Radial cam drive for maximum precision and repeatability. Press unit: Integrated for cutting, punching, or marking operations prior to bending. Safety: Machine equipped with protective guards and emergency stop. Advantages Versatility: Enables the production of highly complex parts in a single cycle. Bihler reliability: Renowned worldwide for robust construction and long-lasting mechanical components. Precision: Ideal for the electronics, automotive, and connector industries.

Condition: good (used), Permanent magnet motor, permanent magnet motor, electric motor, n-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm Hfodpfx Aerqipnocbeg -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

Condition: good (used), Faceplate, faceplate chuck, four-jaw chuck, facing chuck -Manufacturer: Garant, faceplate chuck size Ø 350 mm -Adapter: Short cone 6 -Bolt circle: Ø 133 mm / M12 -Through hole: Ø 80 mm -Groove width: 18 mm Hfedjt Hadaspfx Acbeg -Dimensions: Ø350 x 135 mm -Weight: 42 kg

Condition: good (used), Year of construction: 2000, For sale is a used punching and bending center from Salvagnini. The S4 P4 is functional and ready for use. • Symmetrical bending unit Type: GPS Automatic device for precision bending Hfsdpsh Dwqhofx Acbjg • Programmable blank holder Type: PB.U12 Consists of a device for automatically setting the length of the blank holder tool and a segment set for the blank holder tool • Panel delivery device/buffer SAP2220.POS Motorized roller table with dimensions of 3000 x 900 mm • Software Type: JOBS4P4.DIARIO Automatic batch size management (JOBS4P4), recording of data and movements of system components (DIARIO) • Control and management system Type: MMACHNT-MICROMach CPU processor: PENTIUM INTEL II 400 MHz Operating system: WINDOWS NT Subject to change/errors in technical specifications and subject to prior sale.

Condition: used, Year of construction: 1994, punching force max. 50 t throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit Hsdpfx Aceyrhyujbsfg With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: used, Year of construction: 2001, gebraucht 2001 9647 prompt, Zwischenverkauf v Italien 24400 € 1 30 to 1250+N x 1000 mm 1250 mm 1000 mm 40 m/Min 30 m/Min 50 m/Min 30 mm 730 1/Min 300 1/Min 980 mm 4 kW 115 l 4000 mm 2780 mm 1900 mm 4000 x 2300 x 1900 mm + Z mm 4800 kg With 6-way multitool holder MTE6 (max. Dm. 24 mm) 2 Clamping claws Table with Brushes, table dimension 1970 x 2260 mm Foot pedal Hfedpfx Ajwirkgjcbjg 2 pcs. additional single matrix holders PC with Euromac Software Eurowin 8.36 Max. Punching force 300 kN Automatic repositioning up to 10.000 mm Max. Punching diameter for single tool 88,9 mm, Max. Punching diameter Multitool Holder MTE6 Dm. 24 mm Max. Opening the clamping claws 7 mm Transport width: 2350 mm User Manual in english and italian CE declaration available WITH LARGE TOOL PACKAGE several pieces of each of the following dimensions: Round: Dm. 2,5/2,8/3/3,12/3,2/3,5/3,9/4,1/4/4,5/5/5,2/5,5/6/7/7,5/8/8,5/9/9 ,5/10/10,5/11/11,5/12/12,5/13/13,5/14/15/16/18/19/20/21/23 Square: 10/12/13/15 mm Rectangle: 5x2/20x2/22x4 mm Oblong hole: 10x6,5/12x8,5/12,2x10,7/18x5 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, degree of automation: automatic, We offer this fully operational TRUMPF TruPunch 5000 R-1300, type: laser punching machine, year of manufacture 2002. If you have any questions or require additional information, please send a message or contact us by phone. Hfsdpfxjy Rgluo Acbeg

Condition: used, functionality: fully functional, inner diameter: 900 mm, Used steady rest for conventional POREBA TR-115 lathes – Ø 450 mm, roller type For sale: used steady rest designed for conventional POREBA TR-115 series lathes. Equipped with rollers to ensure stable support of the workpiece during machining. Hfedpfx Aey E Nxmecbjg Technical data: Diameter range: 450 mm Type: roller steady rest Condition: Used Description: Perfect for machining long and heavy workpieces. Improves machining accuracy and reduces vibrations.

Condition: new, Heidenhain ROD 420 1024 01 -03 . 295281-81 rotary encoder without connector, serial number: 11463528A / B4, unused in opened original packaging, 100% functional, scope of delivery as per photos. Hfjdpfey Nqpuox Acbog

Condition: new, IDAM RI13-3P-298x150-Z4-O-O-M-Prim Torque Motor , serial no. according to photo ,with test certificate, unused, 100% functional, scope of delivery according to photos ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Hfjdpfxji D Id As Acbjg

Condition: ready for operation (used), Turck TBEN-LG-16DOP Compact multi-protocol I/O module for Ethernet F/W Version V3.1.3.0, used, normal signs of use, 100% functional, scope of delivery as per photos Hfodjxaicrspfx Acbeg

Condition: ready for operation (used), Mapal MN5364-08-KF expansion chuck DIN 69882-7 with axial length adjustment Ø 16 mm DIN4000-89-HSK - hollow shank taper base holder, used, normal signs of wear, 100% functional, scope of delivery as per photos Hfjdpsi Eb Abjfx Acbeg