Used Wire Cutting for sale (16,738)

Condition: used, Technical details: wire diameter - max.: 9,0 mm wire diameter - min.: 2,0 mm voltage: 380 V / 50 Hz V control voltage: 220 V Total power requirement: 18 kW Weight approx.: 5,0 t dimensions: Schmiermittelanlage: 830 x 650 x 1000 mm dimension machine xH: 3,3 x 1,5 x 1,45 m dimensions electric cabinet LxWxH: 0,7 x 1,5 x 1,75 m WIRING AND CUTTING MACHINE / MACHINE WAS UPGRADED WITH A NEW CONTROL SYSTEM IN 2000 A programmable, electronically-hydraulically controlled universal spring coiling machine for the production of right and left-hand tension and compression springs as well as torsion springs. The springs can be produced with any pitch and shape of spring body. Output max. 90 pieces/min. Outer spring Ø 10 - 120 mm Unlimited wire feed length, speed = 27 - 80 m/min. Coiling device: two-finger system wire thickness Ø 2.0 - 9.0 mm; spring outer Ø Ø 10 - 120 mm Single-finger system: wire thickness Ø 3.0 - 7.0 mm; spring outer Ø max. Ø 60 mm Equipment: 5x feed rollers, wire holder 3 mm two-finger Spring length measuring device LION PRECISION-PANTHER Wire roller holder POST, motor-driven, mandrel holder Ø 1,400 mm Lubrication system Control cabinet cooler RITA Hydraulic unit Optional many accessories and/or spare parts! Nwodpjvc Aklefx Afqjp i.D. *

Condition: good (used), Steel wire sheet cutter Cutting length 3900 mm Dimensions Length: 5100 mm Nwedpfx Aogiplvofqsp Width: 1700 mm Height:3100 mm

Condition: used, Year of construction: 2015, functionality: fully functional, Machine decommissioned due to purchase of a new one. Nwodpfx Afjxnpmgeqop

Condition: refurbished (used), Year of construction: 2001, NICE MACHINE REFURBISHED Nodpfxoxc Elho Afqswp

Condition: used, Year of construction: 2011, machine/vehicle number: 4, Elektrische Hochleistungs-Schneidemaschine / High Speed Wire Cutting Machine RENZ HSC-EBaujahr / Year 12/2011 - Serial-No. 460007150.50107 Schneideleistung bis / Cutting capacity max. 3000 Stück/h Schneidelänge 3 - 99 Schlaufen, variabel einstellbar Cutting length 3 – 99 loops, variable adjustable Stückzahlzähler ja / Piece counter yes Verarbeitbare Durchmesser / Possible wire diameters 3/16" - 1 1/4" ( 5,5 - 32 mm ) Teilung / Pitch 2:1, 3:1, 4:1 Nodpfx Ajiit Ifefqowp Umrüstzeit von Durchmesser zu Durchmesser / Time required for diameter change 2 - 10 Min. Spannung Power supply / 230 V / 50 Hz Maße / Machine L110 x W82 x H100 cm Gewicht / Weight gross 74kg Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1951, Straightening machine with 4 straightening lines for wire diameters of 8, 10, 12, and 14 mm. Electromechanical drive of the feed rollers and rotating straightening units. Cutting device with automatic imprinting of the manufacturer's identification. Electronic length measurement with rotary pulse encoder. Parallel drive of the straightening lines is possible for 8–14 mm diameter (up to 3 lines max). Control panel with switching and monitoring functions. Program control via SPS Simatic S5. Bar run-out track with a length of 14 m, equipped with 4 collection troughs for wire diameters of 8, 10, 12, and 14 mm. Wire feed consists of 4 wire decoiling reels, pneumatically braked and controlled, for coil weights up to max. 2,500 kg. Nedew Rvg Topfx Afqowp

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Nwjdpfx Aou Ic Hnofqep Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, 2006, Eurobend CNC 16x4 rebar from coil straightening and cutting machine in used but working condition. 4 x 5 Ton decoilers with pneumatic brakes. 4 x rotor for diameter 8-10-12-16 mm rebar wire straightening and automatic cutting with hydraulic moving cutters. 1 line or even up to 4 lines together cutting. PC with barcode scanner option. Cutting length up to 14 meters and more. Pockets for storage. Chain conveyor for transport of bundles. Njdpfx Afsrdvq Aoqswp

Condition: used, Year of construction: 2000, functionality: unexamined, Decommissioned machine due to the purchase of a new one. Nsdjxnpkxjpfx Afqswp

Condition: excellent (used), Year of construction: 2017, Technical datas:   X-Axis Travel (mm): X-Axis Travel (mm): X-Axis Travel (mm): Worktank length: Worktank width: Worktank height: Max. workpiece length: Max. workpiece width: Max. workpiece height: Max. workpiece weight: Taper angle/height: Automatic Wire Feeding: Length x width x height: Weight (kg): Nwjdoxazx Sspfx Afqop Worked power hours: The technical data and illustrations are not binding. They are not warranted characteristics and are subject to change.

Condition: new, Year of construction: 2021, functionality: fully functional, total height: 5,400 mm, total length: 8,300 mm, total width: 2,300 mm, warranty duration: 12 months, input voltage: 380 V, input frequency: 50 Hz, Machine for squaring blocks and cutting slabs and thick slabs, featuring a heavy-duty, arc-welded steel structure, which is heat treated to ensure the required stiffness of the system and a top cutting precision. Nwsdstwww Hjpfx Afqsp Extremely user-friendly, the machine is provided with a control console with touch-screen housed in the electric cabinet and a mobile button panel to actuate the main working axes. The machine needs to be adapted for different voltages and frequency. The machine is not available for North America.

Condition: ready for operation (used), size 52x72 Nwjdpfsxzhdwox Afqsp

Year of construction: 2008, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting Systems, machine cutting torch, flame cutting machine Nwjdpfxsxy Hu Sj Afqjp -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H300 mm -Weight: 7.7 kg

Condition: excellent (used), For sale is a Costa puma series cutter in excellent condition. It can be put to work immediately. It can be tested on site. I will send a video upon request. Nsdpfxsxw Rhdj Afqswp

Condition: new, Titan DrillCut – Flexible Cutting and Drilling Center for Maximum Efficiency The Titan DrillCut is a powerful CNC machining center that combines thermal cutting (plasma or oxy-fuel) with precise drilling and thread cutting in one machine. The robust gantry design ensures vibration-free processing even with heavy material thicknesses up to 200 mm. Njdpfjfz A I Esx Afqswp Equipped with the integrated VarioDrill system, it allows for efficient, non-hardening machining of holes from Ø 6 to 40 mm as well as thread cutting from M4 to M20. An automatic tool changer enables rapid switching between drilling, countersinking, and threading – ideal for automated production processes. This machine is the perfect solution for steel construction, mechanical engineering, and industrial metalworking, where utmost precision, flexibility, and production speed are essential.

Condition: new, Year of construction: 2024, This tube cutter is suitable for cutting various types of paper tubes. It can automatically cut the long paper tubes produced into several shorter ones according to demand without flattening the thin tubes. Fast pipe discharge speed, high efficiency, smooth cutting surface, no rough edge, light and easy operation, low energy consumption. The machine adopts servo drive, PLC control, CNC touch screen, the system is equipped with compensation system, making the cutting more accurate. This machine adopts fixed knife to cut, the paper tube turns when cutting, the die blade does not move, effectively protect the blade and die, extend the service life of the machine. The size of pipe cutting mould can be adjusted according to customer's requirement. It is easy and quick to replace the mould. The machine can be customized according to the paper tube to meet the needs of the customer site. Specification Paper tube length - 10-1000 mm Paper tube diameter - Ø20-200 mm Paper tube thickness - 1-20 mm Number of cutter - 1 piece Minimum cut length - 10 mm Cutting Mode - Paper tube turn Feed way - pneumatic (0.4MPa) Operator - 1 person Speed control - servo motor Main motor - 2.2kw Nodpfx Afertnnyjqowp Servo motor - 1.5kw Voltage - 380v, 50hz Dimension - 1900*850*1250mm Cutter specifications - Ф83*Ф32*1.2 Weight - 700kg

Condition: new, Year of construction: 2025, PROFESSIONAL WIRE FEEDER WITH AC SERVO MOTOR FOR LASER AND TIG WELDING Citronix professional wire feeder with servo technology - means that it uses ac servo motor for motor drive, which enables it not only to feed wire very precisely even when the speed is low, but also the ability to set the length in „mm“ for wire withdrawal, and also, after the material is cooled down, we can push it again (the smallest step 0,1 mm) This is a very important feat with laser welding, and this working method is an advantage compared to wire feeders made in the Far East, since with those machines the function of withdrawal and pushing the wire is set on time, and the consequence of this method is that the tip of the welding wire never comes back to the place where the withdrawal started. We made the Citronix wire feeder in a way that it can control not only the wire feeding process, but it can also manage (turn on and off) both the laser source and the gas magnetic valve. This is another significant difference and advantage compared to other manufacturers, because usually there is no spot welding technology in laser welding machines, so if someone wants to weld sheets in the spot welding technology, he can set the spot time and the wire feeder will control the laser source. Wire feeder has 4 operation technologies: 1. continuous welding with wire feeding; 2. continuous welding without wire feeding; 3. spot welding without wire feeding; Wire feeder has 200 memory cells – locations, if the parameters are set, they can be saved on the memory location and we can name them in any number or text combination, in order to make use easier. We also developed a foot pedal, which can be attached to the wire feeder and regulate the feeding speed. It works like a gas pedal in motor vehicles. If, for example, we set the maximal speed 10 meter per minute on the display, and press the pedal all the way, the speed will be 10 meter per minute (or the speed we set), if pressed only half way, the speed will be half of the set speed. This feat can be used if the operator remains in one place, for example if he is sitting. If this pedal isn't necessary, the wire feeder can be attached to the system in a manner to turn on-off the welding process from the button on the torch. This pedal is optional, and in case you want to order it, it is additionally charged 400 EUR. Take a look at the monitor images and see the functions – parameters that can be adjusted. Nwodpjmk S Sljfx Afqep Citronix wire feeder can be used not only for laser welding, but also for the TIG welding, we made a filter to prevent HF-spark. Wire thickness it can push is from 0,8-2,4 mm. At this moment, we have a menu in English, German, Hungarian, and Serbian language.

Condition: ready for operation (used), Year of construction: 2006, size 74x102cm Nodsxzhb Ajpfx Afqowp

Year of construction: 2006, condition: good (used), Flame cutting system, torch, oxyfuel cutting system, machine cutting torch, flame cutting machine, cutting torch, cutting machine, oxyfuel cutting machine, gas cutting torch -Manufacturer: Messer Cutting & Welding, machine cutting torch, flame cutting machine Nedpfxexy Hqto Afqswp -Type: Quicky -Cutting speed: adjustable -Voltage: 230 V 40 W -Dimensions: 520/280/H330 mm -Weight: 7.8 kg

Condition: ready for operation (used), Wire Electronic DSV 5431-25 / 380 - DSV 5431-25/380, serial number as per photo, used, normal signs of use, 100% functional, scope of delivery as per photos Nwjdpextwddjfx Afqep

Condition: new, Diamond Cube – Fiber Laser Cutting Machine | Compact | Precise | Efficient The Diamond Cube is a space-saving yet powerful fiber laser cutting system designed for professional metal processing. It is ideal for companies seeking to combine high cutting quality and economical production in a compact machine. Technical highlights: – Working area: 3000 × 1500 mm (standard format) – Laser power: available in various power ratings depending on configuration – Material processing: steel, stainless steel, aluminum, and more – Maximum material thickness: up to approx. 25 mm (depending on power) – Positioning speed: up to 120 m/min – Precise servo drive and robust gantry design – Front loading with pull-out table for fast part changeover – Modern CNC controller with integrated CAD/CAM software – Low maintenance thanks to fiber laser technology Advantages for your production: – High cutting quality and repeatability – Compact design – minimal footprint – Fast changeover times and easy operation Nwsdpfx Afefz Di Asqep – Excellent cost-effectiveness and low operating costs – Ideal for small to medium batch production and contract manufacturing The Diamond Cube is the ideal solution for companies in steel construction, mechanical engineering, and metal fabrication wishing to modernize their production and rely on a dependable, precise, and energy-efficient laser cutting system.

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Nwsdpfxswwzudo Afqop Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: new, functionality: fully functional, Year of construction: 2025, degree of automation: semi-automatic, laser type: fiber laser, Equipment: CE marking, dust extraction, emergency stop, Diamond Tube Laser T9350 – Precision and Flexibility for Tube and Profile Processing The Diamond Tube Laser T9350 from Eckert Cutting is a state-of-the-art laser tube cutting system specifically designed for processing tubes and profiles. Its robust gantry construction and angled rack-and-pinion drive provide exceptional rigidity, stability, and speed. Thanks to an intelligent, pneumatically controlled clamping system and floating tube support, the machine securely holds tubes and profiles of varying shapes and lengths—ensuring consistently high cutting quality even with long parts. The system enables the processing of a wide range of tube and profile geometries, including round, square, rectangular, oval, elliptical, special profiles, channels (C), I- and H-beams, and many other shapes. Complex angled and bevel cuts of up to 45° are also possible (with optional 4-, 5-, or 6-axis heads). Additional highlights include: 360° processing with CNC-controlled self-centering, high cutting precision with finely defined cut edges, stable production even with long tubes, as well as options for series production and automation through optional loading systems. Nsdpfef Ak Swex Afqewp With its versatility and reliability, the Diamond Tube Laser T9350 is ideally suited for companies in metalworking, steel construction, mechanical engineering, and fabrication—anywhere precise tube and profile processing with high efficiency and repeatability is required.

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Nwjdpjwwz Dlofx Afqjp Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 6,000 W, travel distance X-axis: 3,030 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 310 mm, total length: 9,500 mm, total width: 4,500 mm, total height: 2,050 mm, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, VS-3015CE 6KW FIber Laser Sheet Cutting Machine Working area (mm) : 3000×1500 X axis travel distance (mm): 1520 Y axis travel distance (mm): 3030 Z axis travel distance (mm)： 310 X/Y axis positioning accuracy ： ≤0.03mm\m X/Y axis repeat positioning accuracy： ≤±0.02mm Max. synthetic positioning speed: 150m\min Max. acceleration: 2G Nedpfx Afov Ngrajqowp Double-sided control panel, adaptive multi-angle placement, simple disassembly, and can fit into a standard 40HQ container. Industrial-grade special air conditioner, constant temperature and humidity for stable performance. Automatic grease and oil injection system, intelligent air pressure monitoring device, and anti-collision detection device provide intelligent protection.