Used Oce for sale (172)

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! The printing machine consists of the following modules: OCE PAPER INPUT MODULE STANDARD B1 OCE INPUT INTERFACE MODULE B1 OCE PAPER INPUT MODULE OPTIONAL B1 OCE OCE IHCS2.1 SETFIN B2 TECHNICAL DETAILS Fjdpfxozkhl Ts Aatspl Dimensions Pal 1051330: H: 114 cm, W: 72 cm, L: 95 cm Dimensions Pal 1051331: H: 113 cm, W: 72 cm, L: 56 cm Dimensions Pal 1051237: H: 147 cm, W: 130 cm, L: 160 cm Dimensions Pal 1051238: H: 192 cm, W: 74 cm, L: 119 cm MACHINE DETAILS Counter readings according to the previous owner’s information, not verified and without warranty. Counter reading B/W A4: 458,756 Counter reading Duplex B/W A4: 939,266 Counter reading B/W A3: 151 Counter reading Duplex B/W A3: 5,677

Condition: ready for operation (used), Year of construction: 2017, A semi-automatic Italian Pack traysealer machine is available. Packaging output with VAC/GAS: 4-5 cycles/min, packaging output with SKIN: 3 cycles/min, vacuum pump output: 63m³/h, max. packaging depth: 120mm, film diameter range: 250mm-340mm, max. film width: 370mm, machine dimensions X/Y/Z: approx. 1100mm/1100mm/1400mm. Including automatic film rewinder. Documentation available. On-site inspection is possible. Fedpfx Aaowt Dabstjpl

Year of construction: 2023, operating hours: 32 h, condition: like new (used), functionality: fully functional, machine/vehicle number: IELE6J18Z047, Isocell Elements air injection plate. Fpodpfezbyi Tsx Aatol Functions perfectly. 10" touchscreen. 20-meter hose included with the machine.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 8x4000 SMO-4008-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 4000 mm - Cutting angle: 1.5° - Strokes/minute: 8 - Backgauge retract distance: 600 mm - Motor power: 11.0 kW - Length: 4800 mm - Width: 1800 mm - Height: 1950 mm - Total mass: 7300.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) Fjdpjiuzupsfx Aatspl - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 10x3200 SMO-3210-N Specifications Fpsdpfxeiukw Tj Aatel - Maximum thickness mild steel (PN-EN S235): up to 10.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 12 - Backgauge retract distance: 600 mm - Motor power: 15.0 kW - Length: 4000 mm - Width: 1800 mm - Height: 2100 mm - Total mass: 8400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: ready for operation (used), functionality: fully functional, empty load weight: 5,500 kg, maximum load weight: 33,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 3,000 mm, suspension: air, tire size: 445.45 r 19.5, color: dark red, Year of construction: 2017, Equipment: ABS, sem berger french curtainsider mega volume, lightened chassis, tare 53q.li, 3 disc axles, french curtainsider with lift and lower at adjustable heights from 2.90m to 3.05m in running order, rear doors, sliding roof cover, trailerable plywood floor, collar hooks on the floor, year 2017, closed pallet rack for 24 units, vehicle coming from abroad already nationalized for Italian registration - INTERDRIVE SRL DEALER - PARMA Fpjdjwg E Tvspfx Aatsl

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-4016-CNC OT-41 Specifications - Nominal pressure: 1600 kN - Max working length 4000 mm - Throat depth: 320 mm - Max stroke: 180 mm - Daylight: 455 mm - Distance between side frames: 3200 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 4100 mm - Width: 1650 mm - Height: 2600 mm - Weight: 10000.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Fpsdpfxsh Ia Trj Aatol Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 4x2000 SMO-2004-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 4.0 mm - Maximum working length: 2000 mm - Cutting angle: 0.5 - 1.5° - Strokes/minute: 6 - 20 - Backgauge retract distance: 600 mm - Motor power: 4.0 kW - Length: 2700 mm - Width: 1500 mm - Height: 1650 mm - Total mass: 2500.0 kg Equipment Fpsdpsiggf Ijfx Aatsl - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: used, machine/vehicle number: 5, empty load weight: 7,000 kg, maximum load weight: 31,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 10/2007, next inspection (TÜV): 08/2023, loading space length: 13,650 mm, loading space width: 2,500 mm, loading space height: 2,820 mm, suspension: air, tire size: 385.55 r 22.5, color: blue, Year of construction: 2007, Equipment: ABS, Merker semi-trailers, 5 identical units available, year 2007, 3 disc-braked axles with 1st axle liftable (SAF), tilting tarpaulin body with lever mechanism on the uprights, sliding roof, SLIM beam, rear doors, internal height 2.82 m, inspected and ready for use – INTERDRIVE SRL DEALERSHIP – PARMA. Fpodoiupniopfx Aatsl

Condition: used, Year of construction: 2025, color: other, empty load weight: 5 kg, mileage: 1 km, fuel type: gasoline, gearing type: other, TITLE: NEW CUSHIONED HOOK-UP CONTAINER WITH FIREPROOF TARPAULIN, HYDRAULIC RAISING AND LOWERING WITH 4 HYDRAULIC PISTONS AND REAR OPENING WITH 2 TR1 ALUMINUM DOORS WITH 1+1 TR1 SIDE SIDES REF: 22-N-110 TYPE: curtain-sided NEW: yes LID: yes OPENING: with raising and lowering OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 6.20 m + 0.20 m EXTERNAL WIDTH OF THE BODY: 2.55 m CUSHION HEIGHT: 2.50 m INTERNAL / EXTERNAL FRONT SIDES: 2.00 m / 2.20 m SIDES INTERNAL / EXTERNAL SIDE: 1.00 m / 1.20 m WEIGHT: 2310 kg BOTTOM FROM: 5 mm WALL FROM: aluminum COLOR: blue RAL 5010The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specialized in trucks, trailers and hook-lift equipment. Fpjdpfx Aajv Ap Uwotel With a fleet of over 50 trucks and over 150 skip loaders, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Condition: used, machine/vehicle number: 1, empty load weight: 6,800 kg, maximum load weight: 30,000 kg, overall weight: 36,800 kg, axle configuration: 3 axles, first registration: 10/2011, loading space length: 13,600 mm, loading space width: 2,500 mm, loading space height: 2,780 mm, suspension: air, tire size: 455.45 r 22.5, color: white, Year of construction: 2011, Equipment: ABS, Semi-trailer, Krone, French-style curtain-sided, year 2011, 3 axles with disc brakes, EBS, rear doors, curtain with sliding tarpaulin and removable/replaceable cover, internal height 2.78m, multi-layer plywood floor, sliding tarpaulins, good condition. – INTERDRIVE SRL DEALERSHIP – PARMA Fpedpfx Aaji D Aidotsl

Condition: excellent (used), Year of construction: 2002, OKUMA Euro Center V50 Year of construction 2002 Control system OSP-U100L Travel distances X-1020 Y-510 Z-525 Table load 680kg Clamping surface 1200x510 Tool changer 20 magazine places Fpedjrfw Nhopfx Aatel chip conveyor

Condition: used, This listing is for Akta Process sample pump. The unit is in full working condition and ready for immediate use. High-performance liquid chromatography sample automation pump optimized for scaling up biopharmaceutical manufacturing and reliable laboratory fluid delivery. [[1](?selectedProduct=28956095), [2](), [3]()] Fpedpfx Aoxhga Roatel Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) [[1](), [2]()] Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. [[1](), [2]()] Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory • Condition: Direct-from-Bench (Decontaminated/Original) • Source Pedigree: Biotech / Research Facility

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 8x3200 SMO-3208-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 8.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 10 - 15 - Backgauge retract distance: 600 mm - Motor power: 11.0 kW - Length: 4300 mm - Width: 2000 mm - Height: 2100 mm - Total mass: 6400.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. Fsdpfjh Rah Usx Aatjpl OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 6x3200 SMO-3206-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 3200 mm - Cutting angle: 1.5° - Strokes/minute: 14 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3900 mm - Width: 1600 mm - Height: 1740 mm - Total mass: 5200.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Fedpjgih Utjfx Aatjpl Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2024, Hydraulic Guillotine Shear QC12Y 6x2500 SMO-2506-N Specifications - Maximum thickness mild steel (PN-EN S235): up to 6.0 mm - Maximum working length: 2500 mm - Cutting angle: 0.5 - 2.5° - Strokes/minute: 18 - Backgauge retract distance: 600 mm - Motor power: 7.5 kW - Length: 3200 mm - Width: 1700 mm - Height: 1850 mm - Total mass: 3800.0 kg Equipment - Backgauge powered by an electric motor (on ball screws) - Hydraulic sheet metal clamping over the entire working length - Blade clearance adjustment - Ball transfer units built in on the table - Workspace illumination - Front Suports - Mobile foot switch Rear ramp The rear ramp has been fitted with ball transfer units so that cut-offs are never left over on the machine. E21S Controller (Mounted on a swivel arm on the left side of the machine) - Backgauge control - 40 programs can be stored - up to 25 different steps in each program - Retract function - One-touch parameter saving - Parameters memory in case of power failure Steel hydraulic lines Hydraulic lines made of steel instead of rubber reduce the chances of future leaks. OCS - Oil Cooling System Oil Cooling System - guarantees the stability of the machine's operating parameters even after long, continuous operation. PCS - Preassure Control System Pressure Control System ensures reliable operation of the blade for many years. Assistance by a specialist We make sure to stay in constant touch with our Clients. Therefore, we add a package of tech support hours of Otinus Professional Assistance to every machine purchased. Technical consulting We have specialists who will determine the right machine and accessories before the purchase - on the basis of technical drawings of the parts you plan to make. See and test the machine Join us for a special demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs. You can provide technical drawings and sample material. Included in the machine price Jednodniowe szkolenie wraz z instalacją maszyny - 1 day (up to 8 hours) - installation of the machine and learning to use the controller. Telephone consultation with a specialist - 7.30 am - 9.00 pm (Mon-Sat) – a time package of 8 tech support hours to be used within 12 months. Free loan of transport rollers and two lifting jacks for easier positioning of the machine at the Client's site. The rollers and jack will be delivered upon prior (no less than 7 days before delivery of the machine) request. Terms of cooperation - 24 month warranty. - Lead time: approx: 10 - 12 weeks. Not applicable if a machine is labeled as available immediately. Fjdpfx Aajgih Upstopl - The machine is brand new. - Warranty and post-warranty service provided by the seller. - The Client is responsible for the machine during unloading and transport on their premises.

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) Fpodpoyrxwwefx Aatjl The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3220-CNC Delem DA-58T Specifications - Nominal pressure: 2000 kN - Max working length 3200 mm - Throat depth: 320 mm - Max stroke: 200 mm - Daylight: 480 mm - Distance between side frames: 2600 mm - Max backgauge distance: 600 mm - Nominal motor power: 15.0 kW - Length: 3300 mm - Width: 1800 mm - Height: 2900 mm - Weight: 10500.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Fpsdpeipxzpefx Aatsl Delem DA-58T controller - Advanced operator support based on algorithms - Advanced, graphic simulation of bending sequences - Operator prompts included - Algorithms to shorten the production process - Automatic calculation of crowning Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site

Condition: used, machine/vehicle number: 1, empty load weight: 6,500 kg, maximum load weight: 32,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2014, next inspection (TÜV): 08/2023, loading space length: 13,620 mm, loading space width: 2,520 mm, loading space height: 2,700 mm, suspension: air, tire size: 385.65 r 22.5, color: white, Year of construction: 2014, Equipment: ABS, French-style box semi-trailer by Krone, year 2014, 3 axles with BPW disc brakes, box with sliding tarpaulin sides, sliding roof with cover, EBS, 8 stanchion locations with internal locations in square tubing, pallet rack system for 32 pallets, rear doors, inspected and valid until 08/04/2023 - INTERDRIVE SRL DEALERSHIP - PARMA. Fpodpfx Aajic I Eietjl

Condition: like new (used), Year of construction: 2014, functionality: fully functional, operating hours: 24 h, I am selling full complete onion peeling processing line with M&P onion peelers, items are listed below: -6x M & P onion peeler machine Fpedpfetzmifox Aatel -all conveyers, elevators for transport peeled, unpeeled and waste product -inspection table -all working platforms -all hoppers for row (unpeeled materials) Excluded air screw compressors but for serious enquire i could help out with additional equipment. Capacity 2700- 4500 kg /h of peeled onion

Condition: like new (used), Year of construction: 2019, functionality: fully functional, control type: PLC-controlled, Auction of a medicinal and spice processing line. The line is still in its original packaging and has never been used. The video shows a sample machine. The offered line consists of the following components: - ST II VIBRO W Fpjdpfjx Nnawox Aatsl - LGU 252 - VIBRO 14 - OGK 1003-A - DOUBLE ZIG-ZAG Control system: PLC-controlled Processing capacity: 20 plants in 5–6 fractions ST II VIBRO W TECHNICAL DETAILS - Sieve length: 1,200 mm - Sieve width: 800 mm - Number of sieves: 2 - Sieve inclination: continuously adjustable from min. 5° to max. 10° - Screen perforation: according to customer requirements MACHINE DETAILS Drive - Type of drive: vibratory motors - Motor power: 2 × 0.18 kW - Motor power: 2 × 0.60 kW Machine weight: approx. 480 kg LGU 252 TECHNICAL DETAILS - Number of sieves: 2 - Sieve size: 2,500 × 800 mm - Sieve perforation: "Peterson" - Inclination adjustment: continuously from min. 20° to max. 40° - Conveyor belt with cleats: 600 mm MACHINE DETAILS - Dimensions (W × L × H): 5,000 × 1,700 × 3,000 mm Drive - Motor power: 0.75 kW - Motor power: 1.5 kW - Motor power: 1.1 kW - Motor power: 2 × 0.55 kW - Operating voltage: 380 V OGK 1003-A TECHNICAL DETAILS - Number of sieves: 1 - Number of blades: 2 - Throughput: min. 40 kg/h to max. 100 kg/h MACHINE DETAILS - Dimensions & weight - Dimensions (W × L × H): 2,440 × 1,914 × 2,525 mm - Machine weight: approx. 970 kg - Motor power: 1.1 kW - Operating voltage: 380 V DOUBLE ZIG-ZAG TECHNICAL DETAILS - Throughput: max. 150 kg/h MACHINE DETAILS - Dimensions (L × W × H): 2,400 × 2,000 × 5,000 mm - Exhaust fan: 1 GENERAL EQUIPMENT - Control 208 - PLC - Aspirator I-6 - Control 308 - Belt conveyors (12 units) - Air technology - Magnets - Speed controllers Note: The machine has been dismantled and is in storage (see photos).

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, paper weight (min.): 40 g/m², paper weight (max.): 300 g/m², Hunkeler RW 6 TECHNICAL DETAILS Paper weight, standard: 40–300 g/m² Fpsdoyzppdspfx Aatol Roll width: min. 165 mm Roll width: max. 520.7 mm Roll diameter: max. 1,370 mm Edge trim width: 8–40 mm Roll weight: max. 800 kg Speed: 10–100 m/min Note on speed: > 150 m/min from min. 200 mm roll diameter MACHINE DETAILS Nominal current: 7 A Active power: 1.1 kW Apparent power: 1.5 kVA Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % Weight: 694 kg Hunkeler UW 6 TECHNICAL DETAILS Paper weight: 40–300 g/m² Roll width: min. 165 mm Roll width: max. 521 mm Roll diameter: max. 1,370 mm Roll weight: max. 800 kg Speed: 10–100 m/min Nominal current: 4 A Active power: 720 W Apparent power: 950 VA Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % Weight: 648 kg Hunkeler RW 6 Vacuum Buffer TECHNICAL DETAILS Paper web width: min. 165 mm Paper web width: max. 521 mm Paper weight: 50–180 g/m² MACHINE DETAILS Ambient temperature: 10 °C to 32 °C Relative humidity: 15 % to 85 % Optimal ambient temperature according to paper specification: 18 °C to 24 °C Optimal relative humidity according to paper specification: 40 % to 60 % GENERAL EQUIPMENT Prepared for online operation with roll printer OCE Variostream 8650.

Condition: new, Year of construction: 2026, The WP600 self-centering three-jaw chuck is a precise and highly durable solution designed for use with welding positioners and welding rotators. Thanks to its advanced construction and wide clamping range, it enables fast and accurate clamping of cylindrical or hexagonal workpieces with considerable weight. It is ideal for professional production and workshop applications where stability and process repeatability are essential. Key Features of the WP600 Chuck High clamping force – up to 1,200 kg, ensuring secure and reliable clamping even for very large workpieces. Clamping range of 300–600 mm – ideal for large-diameter pipes and components. Load capacity of 1,000 kg – designed for heavy workpieces being welded or machined in rotation. Self-centering three-jaw mechanism – ensures precise axial positioning of the workpiece. Versatile applications – suitable for pipes, square and hexagonal profiles, as well as irregularly shaped workpieces. Construction and Technology The WP600 is equipped with three robust self-centering jaws made of tool steel with increased wear resistance. The jaws are synchronized by a precision mechanical system, ensuring stable and accurate clamping. The Ø360 mm central through-hole allows long pipes to pass through the chuck, significantly expanding its range of applications in welding and assembly processes. Precision and Operating Efficiency The WP600 chuck reduces workpiece setup time for welding or machining while ensuring high positioning accuracy. The repeatability and precision of clamping directly contribute to the quality of welds and machining operations. It is an ideal solution for facilities requiring efficient integration with welding rotators and the highest possible production quality. Applications The WP600 chuck is perfectly suited for use with welding rotators and welding positioners. It is designed for clamping large and heavy workpieces, including: Pipes Flanges Tanks Frames Specialized structural components It is particularly suitable for structural steel fabrication, the power industry, tank manufacturing, and companies performing circumferential welding and precision assembly. Fpsdpfozwmtijx Aatol Technical Specifications Specification Value Model WP-600 Maximum clamping force 1,200 kg Maximum load capacity 1,000 kg Through-hole diameter Ø360 mm Clamping range Ø300–600 mm

Condition: used, Used Berges Type ACP6004-OC frequency converter for regulating the speed of electric drives in woodworking machinery. It is suitable for use in woodworking machines and systems requiring variable motor control. Fpedpfsztnc Rjx Aatjl

Condition: new, Year of construction: 2024, Hydraulic press brake PBO-3225-CNC OT-41 Specifications - Nominal pressure: 2500 kN - Max working length 3200 mm - Throat depth: 400 mm - Max stroke: 250 mm - Daylight: 535 mm - Distance between side frames: 2500 mm - Max backgauge distance: 600 mm - Nominal motor power: 18.5 kW - Length: 3300 mm - Width: 1850 mm - Height: 2900 mm - Weight: 11700.0 kg Tools - Front supports: 2 pcs - Backgauge distance regulation (X-axis): servo motor - Ram control (Y-axis): servo motor - Finger height adjustment (R axis): manual - Type of punch holder: AMADA quick-action clamping Fodpfjh Rdvasx Aatjpl Otinus CNC controller OT-41 The Otinus CNC controller features a convenient and intuitive menu. The software calculates the bending angle itself. The large colour touch screen is easy to read from any angle. Optional extra - Manual crowning So that you are always sure that the workpiece will have the same angle along its entire length. Optional extra - Automatic crowning Enables the controller to take control over crowning, thus, ensuring that the setting value is always perfectly matched to the needs. OCS - Oil Cooling System Oil Cooling System guarantees the stability of the machine's operating parameters even after long, continuous operation. Assistance by a specialist We make sure to stay in constant touch with our Clients. This is why we add a time package of tech support hours for Otinus Professional Assistance to each machine purchased. See and test the machine Join us for a one-of-a-kind demonstration where a qualified Otinus technician will show you the full functionality of the machine. In addition, you will be able to try out how the device will perform against your needs as you can provide technical drawings and sample material. Included in the machine price 2-day training including installation of the machine - 1st day (up to 8 hours) - installation of the machine and learning to use the controller. - 2nd day (up to 8 hours) - independent work on the machine under the supervision of our technician with the possibility of programming specific parts manufactured by the Client. Telephone consultation with a specialist - 7.30 a.m. to 9 p.m. (Mon-Sat) - package of 8 hours to be used within 12 months - Free lending of transport rolls and two lifting jacks for easier positioning of the machine at Clients' facilities. The rollers and jack will be delivered after prior notification (no less than 7 days before delivery of the machine). Terms of cooperation - 24 month warranty - The machine is brand new - Warranty and post-warranty service provided by the seller - The Client is responsible for the machine during unloading and transporting on-site